DATASHEET

SBC314
3U VPX QorIQ AMP T1042 / T2081-based Single Board Computer
The SBC314 is the first Freescale™ In addition the SBC314 supports a diverse
QorIQ™ AMP (advanced multiprocessing I/O set that includes Gigabit Ethernet, COM FEATURES:
series) based product to join Abaco’s ports, USB 2.0, SATA and GPIO.
• 3U OpenVPX single board
VPXtreme3 family of rugged 3U VPX single
computer
board computers. Further incremental system resource
• Power Architecture™ AMP
expansion is provided via an XMC/PMC-
(advanced multiprocessing)
The SBC314 offers a high performance capable mezzanine site which offers the
CPU’s
option based on the T2081 processor and option of having either XMC I/O or PMC I/O
a low power option based on the T1042 routed to the VPX backplane connectors. -- T1042 (four e5500 cores)
processor, allowing the user to select a -- T2081 (eight e6500 virtual
solution tailored to their application. Designed specifically for harsh environments, cores)
the SBC314 is ideal for embedded and mil/ • DDR3L (up to 8 GB)
• The T2081 brings the benefits of AltiVec aero applications where high reliability and • Up to 256 MB NOR Flash
co-processing to a 4-core platform, survivability are a must. Available in five air- • Up to 16 GB SLC NAND Flash
each of which is dual threaded, offering 8 and conduction-cooled ruggedization levels,
• 512 kB Autostore NVRAM
virtual cores, consuming up to 25W. the SBC314 also offers VITA 48 formats for
• PCIe Gen2 data plane ports from
• The T1042 is optimized for lower power 2-level maintenance (2LM) requirements.
VPX P1 (options for 2 x4, 1 x4 + 4
consumption applications, offering 4 single x1, 8 x1)
threaded cores consuming less than 7.5W. The SBC314 is fully supported by
• 1x PMC/XMC Site
comprehensive Deployed Test Software
(BIT and BCS) with operating system support • Up to 3x Gigabit Ethernet ports
Combined with an extensive and flexible
planned for VxWorks® 6.x, 7, VxWorks653®; • 2x RS-232/422 COM ports (or 4x
range of I/O options, the SBC314 is ideal
Open Source Linux®; Wind River Linux® RS-232)
for a wide range of high performance mil/
and INTEGRITY™. • Up to 2x SATA ports
aero applications.
• 2x USB 2.0
In addition, the SBC314 is also supported
Fully compatible with OpenVPX (VITA 65), the • Up to 8x single-ended GPIO (5V
by Abaco Systems innovative P2P software, tolerant)
SBC314 offers multiple connectivity options
which supports the implementation of PCI
via its highly configurable PCI Express™ • BMM (Board Management
Express peer-to-peer connectivity.
fabric ports enabling a range of scalable Microcontroller)
solutions from single host and peripherals to • VITA65 OpenVPX Compatible
larger multiprocessor systems. -- MOD3-PAY-2F2T-16.2.5-3
-- MOD3-PAY-2F2U -16.2.3-3
 DATASHEET

SBC314 3U VPX QorIQ AMP T1042 / T2081-based Single Board Computer

Specifications Block diagram

Processor Node
• Support for T2081 or T1042 Freescale
QorIQ AMP CPU’s
• T2081 up to 1.8 GHz
-- Eight e6500 virtual cores (4 cores, dual VPX
threaded and with AltiVec co-processing) P0
-- Double-precision floating-point support FPGA
-- 2 MB banked L2 cache, 512MB GPIO 4-7
platform cache FLASH
DDR3L SDRAM 256MB T2081 / T1042
USB 2x USB 2.0
• Up to 8 GB DDR3L SDRAM with ECC Quad Core
(Single Bank) NVRAM
512KB
Integrated DUART Transceiver 2 or 4x Serial ports
LBC
Flash Memory Host 1x 1000BASE-T/
• Up to 256 MB NOR Flash memory 4/8GB Processor PHY Mag
2x 1000BASE-X
• Protected BANC Boot Area RAM DDR 2x RGMII VPX
• Up to 16 GB NAND Flash memory 1x 1000BASE-T P1
64-bit w/ECC PHY Mag
Fabric @ 1600 MT/s
• Two x4 PCIe Gen2 links from VPX
P1 (one can be configured as a non- PCIe x4 PCIe x4 PCIe x1 Eth Mag
transparent port) (Gen 2) (Gen 2) MAC/
• Each link can be optionally configured as PHY 16GB
Build-time GPIO 0-3
four x1 PCIe NAND
variants
Gigabit Ethernet PCIe x1 MUX
16-Lane Gen2 PCIe-
• 2x 1000BASE-T or 1x 1000BASE-T + 2x Run-time 2x SATA-300
PCI Express SATA
1000BASE-X as standard (P1 rear IO) options
Switch 8 Lanes PCIe Gen 2
• Additional 1000BASE-T port available (P1 PEX8619 Two x4
rear I/O) as an option instead of 1x SATA
One x4 + Four x1
port and 4 GPIO ports PCIe PCI-X
XMC
Eight x1
/ VPX
Serial I/O PCI-X
PMC 64 User I/O P2
• 2x RS-232/422 UART ports (P1/P2 rear I/O)
MUX Bridge 133MHz
USB
• 2x USB 2.0 (P1 rear I/O)
SATA
Environmental
• 2x SATA (300 MB/s) (P1 rear I/O). Lose one
port if additional Ethernet port is required
(as above). Lose one port if on-board NAND Level 1 Level 2 Level 3 Level 4 Level 5
selected Cooling Method Convection Convection Convection Conduction Conduction
General Purpose I/O Conformal Coating Optional Standard Standard Standard Standard
• Up to 8 GPIO (P1 rear I/O), 5V tolerant GPIO High/Low Temp 0 to +55°C -20 to +65°C -40 to +75°C -40 to +75°C -40 to +85°C
each capable of generating an interrupt. Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall
PMC / XMC Extension Slot Random Vibration 0.002g2/Hz* 0.002g2/Hz* 0.04g2/Hz** 0.1g2/Hz** 0.1g2/Hz**
• x4 PCIe XMC site (P2 rear I/O) Shock 20g*** 20g*** 20g*** 40g*** 40g***
• PCI-X PMC site (P2 rear I/O) * With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth
• Available with VITA 42 connectors 11 ms duration
(contact factory for VITA 61 connectors)
NVRAM / Real-Time Clock / Watchdog / ETI
• 512 kB Autostore NVRAM
• Real-time clock with 1 second resolution
• 2x Avionics-style Watchdog timers
(programmable 32-bit timer)
• Elapsed Time Indicator (record power
cycles and on-time)
Temperature Sensor
• Onboard ambient temperature
Power Requirements WE INNOVATE. WE DELIVER. YOU SUCCEED.
• +5V required
• +/-12V only if required by mounted Americas: 866-OK-ABACO or +1-866-652-2226 Asia & Oceania: +81-3-5544-3973
PMC module
Europe, Africa, & Middle East: +44 (0) 1327-359444
Locate an Abaco Systems Sales Representative visit: abaco.com/products/sales

abaco.com @AbacoSys
©2017 Abaco Systems. All Rights Reserved. All other brands, names or trademarks are property
of their respective owners. Specifications are subject to change without notice.
01/15 A-DS-2047