FIRE PROTECTIVE CLOSURES
ROLLING FIRE DOORS
Models ERD10 and ERD20 (insulated Firemiser™)
STOP FIRE AND SMOKE IN ITS TRACKS
TAILORED LIFE SAFETY SOLUTIONS CUSTOM BUILT FOR EVERYDAY USE
Our fire doors help save property, and more impor- Designed for fire rated openings, our fire doors
tantly, lives. Our advanced Fire Door Systems offer provide security and access control and are for use in
industry-leading, intelligent operation that: openings that are not part of a required means of
▶ Activate thermally or electrically to contain fire and egress. Factory Mutual Approved and listed with the
smoke spread California Office of the State Fire Marshall. UL listed
▶ Easily - or even automatically - reset or auto open for fire protection ratings of 3/4, 11/2, 3 and 4 hours.
after a fire event or power outage
INSULATED ROLLING FIRE DOOR OPTION
ENHANCED SMOKE PROTECTION The Firemiser insulated fire door has a Sound Trans-
Optional SmokeShield® smoke and draft control mission Class (STC) rating of up to 30 for the curtain
conforms to UL1784 and assures that smoke will be and up to 18 for the entire assembly. If an STC of 32 is
desired, additional options are required. Please
compartmentalized with the fire and not spread
consult the factory for details. All configurations are
quickly throughout the facility, allowing safe egress evaluated per ASTM E90, based on testing a complete,
for occupants. operable assembly.
FIRE PROTECTIVE CLOSURES ROLLING FIRE DOORS
Models ERD10 and ERD20 (insulated Firemiser ) TM
STANDARD COMPONENT MATERIALS AND FINISHES
BRACKETS - Steel with powder coating to match curtain. Bolt to guide
assembly and support counter-balance shaft and curtain.
COUNTER-BALANCE SHAFT - Steel. Supports curtain and contains
torsion springs for assisting operation.
HOOD - Galvanized steel with GalvaNex™ polyester enamel finish to match
curtain. Encloses the curtain and provides fire protetion at the head of the door.
CURTAIN
FIRE DOOR MODEL ERD10
Interlocking roll formed slats of galvanized steel with GalvaNex polyester
enamel finish in Gray, Tan, White or Brown. Cast iron endlocks are riveted
to the ends of alternate slats to maintain alignment and prevent wear.
FIREMISER MODEL ERD20
Double skin interlocking roll formed slats of galvanized steel, with GalvaNex
polyester enamel finish in Gray, Tan, White or Brown filled with mineral
wool insulation. Flame spread and smoke development index factors are
zero as tested per ASTM E84. Cast iron endlock/windlocks are riveted to
the slats to maintain alignment, lock curtain into guides
and prevent wear.
Model ERD10 shown. GUIDES - Structural steel with powder coating to match curtain. Guide
assemblies bolt to the wall and support the weight of the door.
BOTTOM BAR - Two back to back structural steel angles with powder
coating in Gray, Tan, White or Brown. Lock mechanisms available.
OPERATION OPTIONAL MATERIALS AND FINISHES
Alarm-activated AlarmGard® ▶ Stainless steel - 300 series in #4 finish
and a variety of motor options ▶ SpectraShield® Powder Coating in more than 180 colors
are the superior choice.
Brackets, Guides and Bottom Bar
Fusible-link-activated chain, crank or
motor options are available for openings ▶ Hot-dip galvanizing on steel components
that are not in a pedestrian throughfare ▶ Zinc-enriched, corrosion-resistant powder coating in Gray
and where electrical activation is
not desired.
