Scribd
Upload
320 views1 page

Sperre HL2 105

Sperre offers a variety of maintenance and spare parts kits for their model HL2/105 compressor. The kits contain all the necessary genuine parts to overhaul specific components like gaskets, valves, pistons, cylinders, and more. Larger overhaul kits contain parts to maintain the compressor for 5,000 or 10,000 hours of use. Using genuine Sperre spare parts and maintenance kits provides customers peace of mind when servicing their equipment.

Uploaded by

daudi eusebio kitosi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
320 views1 page

Sperre HL2 105

Sperre offers a variety of maintenance and spare parts kits for their model HL2/105 compressor. The kits contain all the necessary genuine parts to overhaul specific components like gaskets, valves, pistons, cylinders, and more. Larger overhaul kits contain parts to maintain the compressor for 5,000 or 10,000 hours of use. Using genuine Sperre spare parts and maintenance kits provides customers peace of mind when servicing their equipment.

Uploaded by

daudi eusebio kitosi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Valuable

technical information

SPARE-PART & MAINTENANCE KITS


Model HL2/105
SPERRE’s kits of genuine spare-parts include the wear parts you must change
when you overhaul the compressor. For example, if you replace a valve, it is
strongly recommended to replace the valve gaskets at the same time. With a
spare-part kit available, all necessary parts are at hand together with clear
installation instructions.

For model HL2/105 are following kits available:

Description Part No Content of kit


Gasket kit 4120 All flat gaskets, O-rings, sealing rings, and valve gaskets.
Crankshaft with all bearings, flywheel key and nut, Seeger-rings,
Crankshaft 1403MK
endplate and screw.
Valve LP 3036MK Valves and necessary copper rings and/or gaskets.
Valve HP 3037MK Valves and necessary copper rings and/or gaskets.
Overhaul kit - LP valve 3036MK2 Valve plate and gaskets.
Overhaul kit - HP valve 3037MK2 Valve springs, plates and gaskets.
Piston LP 3358MK Piston, gudgeon pin with Seeger-rings and piston rings.
Piston HP 3352MK Piston, gudgeon pin with Seeger-rings and piston rings.
Connecting rod with small- and big-end bearings, oil scoop with set
Connecting rod 1424MK
screw.
Cylinder LP 1139MK Cylinder with gaskets, stud bolts/nuts and fittings.
Cylinder HP 1133MK Cylinder with gaskets, stud bolts/nuts and fittings.
All parts needed for 5 000-hours’ maintenance: Overhaul kits for
Overhaul kit Routine B 7936 valves complete with gaskets and guide rings, piston rings, connecting
rod bearings, gudgeon pins, Seeger-rings, gaskets and ventilator.
All parts needed for 10 000-hours’ maintenance: Same as kit B, plus
Overhaul kit Routine C 7966
complete valves, crankshaft bearings and seal ring.

Maintenance kits:
• All necessary parts at hand when you need them
• With clear installation instructions enclosed

Genuine Sperre parts give you peace of mind at sea!

Sperre Industri AS Sperre Rotterdam BV Sperre Asia PTE LTD Sole suppliers of
Tel +47 70 16 11 00 Tel +31 180 463 299 Tel +65 763 63 00 genuine spare parts
Fax +47 70 16 11 10 Fax +31 180 463 264 Fax +65 763 18 11
E-mail:[email protected] E-mail:[email protected] E-mail:[email protected]

You might also like