Scribd
Upload
132 views8 pages

3.2" TFT 480x320 For Arduino Mega2560 Model:QDM320DBXNT8357RA

This document summarizes a 3.2" TFT LCD display module with a 480x320 resolution that is compatible with the Arduino Mega2560 board. The module has a HX8357B controller, includes power conversion circuits, and can directly connect to the Mega2560. It supports 16-wire data interface and includes an SD card socket and SPI flash circuit. The module operates at 5V or 3.3V and includes examples for using it with Arduino and STM32 microcontrollers.

Uploaded by

Vlado Stojanov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views8 pages

3.2" TFT 480x320 For Arduino Mega2560 Model:QDM320DBXNT8357RA

This document summarizes a 3.2" TFT LCD display module with a 480x320 resolution that is compatible with the Arduino Mega2560 board. The module has a HX8357B controller, includes power conversion circuits, and can directly connect to the Mega2560. It supports 16-wire data interface and includes an SD card socket and SPI flash circuit. The module operates at 5V or 3.3V and includes examples for using it with Arduino and STM32 microcontrollers.

Uploaded by

Vlado Stojanov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

3.

2” TFT 480x320 For Arduino Mega2560


Model:QDM320DBXNT8357RA

Overview
QDM320DBXNT8357RA module is 3.2" TFT LCD with 262K color 480x 320 resolutions.
The controller of this LCD module is HX8357B, it supports 16-wires DataBus interface.
Moreover, this module includes the 5V-3.3V power conversion circuit and Level
conversion circuit, This Module can Directly inserted into the Arduino Mega2560
Board ,it also includes the SD card socket and SPI FLASH circuit.

Electronics Katrangi Trading

www.ekt2.com
Features
 Support Arduino Mega2560 Directly inserted
 With Full-angle IPS TFT panel
 OnBorad level conversion chip for 5V/3.3V MCU
 Compatible with 3.3/5V operation voltage level
 Compatible with Arduino-Series development Board.
 Compatible with UTFT / UTFT_Buttons /Utouch Library for arduino.
 provided 12-examples with Arduino ,3-examples with STM32 
 With SD Card Socket
 With SPI FLASH circuit

Specifications
Item Description
Display Type 3.2 inch a-si TFT LCD Module
Glass Type TFT IPS(Full-Angle)
Display Resolution 480X320 Pixels
Back light 6 chip HighLight white LEDs
Control IC HX8357B
Interface 16Bit parallel interface
PCB Module size 89.92mmX54.25mm
LCD Area(WxHxT) 50.74mmX78.35mmX1.88mm
Active Area(WxH) 67.68mmX45.12mm
Module weight TDB
Power Consumption 80-110 (mA)
Module Supply 5V/3.3V

Electrical Characteristics
Specification Min Type Max Unit
Power Voltage(VDD/VCC) 3.3 5 5.5 VDC
MCU Voltage = 3.3V 3 3.3 3.6
IO Pins Voltage V
MCU Voltage = 5V 4.5 5 5.5
BackLight Voltage 2.8 3.2 3.3 V
Current Consumption - 100 - mA

Electronics Katrangi Trading

www.ekt2.com
Hardware

Electronics Katrangi Trading

www.ekt2.com
PinMap

How to Connect with Mega2560

Top view

Electronics Katrangi Trading

www.ekt2.com
Top view

Module Structure

Electronics Katrangi Trading

www.ekt2.com
Demo Effect

Electronics Katrangi Trading

www.ekt2.com
Electronics Katrangi Trading

www.ekt2.com
Made in China

Electronics Katrangi Trading

www.ekt2.com

You might also like