Introduction to Networks ( Version 7.

00) – Modules 14 – 15: Network

Application Communications Exam
1. Which action is performed by a client when establishing communication with a
server via the use of UDP at the transport layer?
 The client sets the window size for the session.
 The client sends an ISN to the server to start the 3-way handshake.
 The client randomly selects a source port number.
 The client sends a synchronization segment to begin the session.
2. Which transport layer feature is used to guarantee session establishment?
 UDP ACK flag
 TCP 3-way handshake
 UDP sequence number
 TCP port number
3. What is the complete range of TCP and UDP well-known ports?
 0 to 255
 0 to 1023
 256 – 1023
 1024 – 49151
4. What is a socket?
 the combination of the source and destination IP address and source and
destination Ethernet address
 the combination of a source IP address and port number or a destination IP
address and port number
 the combination of the source and destination sequence and acknowledgment
numbers
 the combination of the source and destination sequence numbers and port
numbers
5. A PC is downloading a large file from a server. The TCP window is 1000 bytes.
The server is sending the file using 100-byte segments. How many segments will the
server send before it requires an acknowledgment from the PC?
 1 segment
 10 segments
 100 segments
 1000 segments
Explanation: With a window of 1000 bytes, the destination host accepts
segments until all 1000 bytes of data have been received. Then the destination
host sends an acknowledgment.

6. Which factor determines TCP window size?

 the amount of data to be transmitted
 the number of services included in the TCP segment
 the amount of data the destination can process at one time
 the amount of data the source is capable of sending at one time
Explanation: Window is the number of bytes that the sender will send prior to
expecting an acknowledgement from the destination device. The initial window is
agreed upon during the session startup via the three-way handshake between
source and destination. It is determined by how much data the destination device
of a TCP session is able to accept and process at one time.
7. What does a client do when it has UDP datagrams to send?
 It just sends the datagrams.
 It queries the server to see if it is ready to receive data.
 It sends a simplified three-way handshake to the server.
 It sends to the server a segment with the SYN flag set to synchronize the
conversation.
Explanation: When a client has UDP datagrams to send, it just sends the
datagrams.
8. Which three fields are used in a UDP segment header? (Choose three.)
 Window Size
 Length
 Source Port
 Acknowledgment Number
 Checksum
 Sequence Number
Explanation: A UDP header consists of only the Source Port, Destination Port,
Length, and Checksum fields. Sequence Number, Acknowledgment Number,
and Window Size are TCP header fields.
9. What are two roles of the transport layer in data communication on a network?
(Choose two.)
 identifying the proper application for each communication stream
 tracking the individual communication between applications on the source and
destination hosts
 providing frame delimiting to identify bits making up a frame
 performing a cyclic redundancy check on the frame for errors
 providing the interface between applications and the underlying network over
which messages are transmitted
Explanation: The transport layer has several responsibilities. The primary
responsibilities include the following:
 Tracking the individual communication streams between applications on the
source and destination hosts
 Segmenting data at the source and reassembling the data at the destination
 Identifying the proper application for each communication stream through the
use of port numbers
10. What information is used by TCP to reassemble and reorder received segments?
 port numbers
 sequence numbers
 acknowledgment numbers
 fragment numbers
Explanation: At the transport layer, TCP uses the sequence numbers in the
header of each TCP segment to reassemble the segments into the correct order.

11. What important information is added to the TCP/IP transport layer

header to ensure communication and connectivity with a remote network
device?
 timing and synchronization
 destination and source port numbers
 destination and source physical addresses
 destination and source logical network addresses
12. Which two characteristics are associated with UDP sessions? (Choose two.)
 Destination devices receive traffic with minimal delay.
 Transmitted data segments are tracked.
 Destination devices reassemble messages and pass them to an application.
 Received data is unacknowledged.
 Unacknowledged data packets are retransmitted.
Explanation:
TCP:
 Provides tracking of transmitted data segments
 Destination devices will acknowledge received data.
 Source devices will retransmit unacknowledged data.
UDP
 Destination devices will not acknowledge received data
 Headers use very little overhead and cause minimal delay.

13. A client application needs to terminate a TCP communication session with a

server. Place the termination process steps in the order that they will occur. (Not all
 options are used.)

Explanation: In order to terminate a TCP session, the client sends to the server a
segment with the FIN flag set. The server acknowledges the client by sending a
segment with the ACK flag set. The server sends a FIN to the client to terminate
the server to client session. The client acknowledges the termination by sending
a segment with the ACK flag set.

14. Which flag in the TCP header is used in response to a received FIN in
order to terminate connectivity between two network devices?
 FIN
 ACK
 SYN
 RST
Explanation: In a TCP session, when a device has no more data to send, it will
send a segment with the FIN flag set. The connected device that receives the
segment will respond with an ACK to acknowledge that segment. The device that
sent the ACK will then send a FIN message to close the connection it has with
 the other device. The sending of the FIN should be followed with the receipt of an
ACK from the other device.

15. Which protocol or service uses UDP for a client-to-server

communication and TCP for server-to-server communication?
 HTTP
 FTP
 DNS
 SMTP
Explanation: Some applications may use both TCP and UDP. DNS uses UDP
when clients send requests to a DNS server, and TCP when two DNS serves
directly communicate.
16. What is a characteristic of UDP?
 UDP datagrams take the same path and arrive in the correct order at the
destination.
 Applications that use UDP are always considered unreliable.
 UDP reassembles the received datagrams in the order they were received.
 UDP only passes data to the network when the destination is ready to receive
the data.
Explanation: UDP has no way to reorder the datagrams into their transmission
order, so UDP simply reassembles the data in the order it was received and
forwards it to the application.
17. What kind of port must be requested from IANA in order to be used with a
specific application?
 registered port
 private port
 dynamic port
 source port
Explanation: Registered ports (numbers 1024 to 49151) are assigned by IANA to
a requesting entity to use with specific processes or applications. These
processes are primarily individual applications that a user has chosen to install,
rather than common applications that would receive a well-known port number.
For example, Cisco has registered port 1985 for its Hot Standby Routing Protocol
(HSRP) process.
18. Which three application layer protocols use TCP? (Choose three.)
 SMTP
 FTP
 SNMP
 HTTP
 TFTP
 DHCP
 Explanation: Some protocols require the reliable data transport that is provided
by TCP. In addition, these protocols do not have real time communication
requirements and can tolerate some data loss while minimizing protocol
overhead. Examples of these protocols are SMTP, FTP, and HTTP.
19. Which three statements characterize UDP? (Choose three.)
 UDP provides basic connectionless transport layer functions.
 UDP provides connection-oriented, fast transport of data at Layer 3.
 UDP relies on application layer protocols for error detection.
 UDP is a low overhead protocol that does not provide sequencing or flow control
mechanisms.
 UDP relies on IP for error detection and recovery.
 UDP provides sophisticated flow control mechanisms.
Explanation: UDP is a simple protocol that provides the basic transport layer
functions. It has much lower overhead than TCP because it is not connection-
oriented and does not offer the sophisticated retransmission, sequencing, and
flow control mechanisms that provide reliability.

20. Which two fields are included in the TCP header but not in the UDP
header? (Choose two.)
 window
 checksum
 source port
 destination port
 sequence number
Explanation: The sequence number and window fields are included in the TCP
header but not in the UDP header.
21. Which field in the TCP header indicates the status of the three-way handshake
process?
 window
 reserved
 checksum
 control bits
Explanation: The value in the control bits field of theTCP header indicates the
progress and status of the connection.
22. Why does HTTP use TCP as the transport layer protocol?
 to ensure the fastest possible download speed
 because HTTP is a best-effort protocol
 because transmission errors can be tolerated easily
 because HTTP requires reliable delivery
 Explanation: When a host requests a web page, transmission reliability and
completeness must be guaranteed. Therefore, HTTP uses TCP as its transport
layer protocol.

23. Which two types of applications are best suited for UDP? (Choose two.)
 applications that need data flow control
 applications that require reliable delivery
 applications that handle reliability themselves
 applications that need the reordering of segments
 applications that can tolerate some data loss, but require little or no delay
24. How are port numbers used in the TCP/IP encapsulation process?
 Source port numbers and destination port numbers are not necessary when
UDP is the transport layer protocol being used for the communication.
 Source port and destination port numbers are randomly generated.
 If multiple conversations occur that are using the same service, the source port
number is used to track the separate conversations.
 Destination port numbers are assigned automatically and cannot be changed.
Explanation: Both UDP and TCP use port numbers to provide a unique identifier
for each conversation. Source port numbers are randomly generated and are
used to track different conversations. Destination port numbers identify specific
services by using either a default port number for the service or a port number
that is assigned manually by a system administrator.
25. In what two situations would UDP be better than TCP as the preferred
transport protocol? (Choose two.)
 when applications need to guarantee that a packet arrives intact, in sequence,
and unduplicated
 when a faster delivery mechanism is needed
 when delivery overhead is not an issue
 when applications do not need to guarantee delivery of the data
 when destination port numbers are dynamic
Explanation: UDP is a very simple transport layer protocol that does not
guarantee delivery. Devices on both ends of the conversation are not required to
keep track of the conversation. UDP is used as the transport protocol for
applications that need a speedy, best-effort delivery.
26. What are three responsibilities of the transport layer? (Choose three.)
 meeting the reliability requirements of applications, if any
 multiplexing multiple communication streams from many users or applications on
the same network
 identifying the applications and services on the client and server that should
handle transmitted data
 directing packets towards the destination network
 formatting data into a compatible form for receipt by the destination devices
 conducting error detection of the contents in frames
Explanation: The transport layer has several responsibilities. Some of the
primary responsibilities include the following:
Tracking the individual communication streams between applications on the
source and destination hosts
Segmenting data at the source and reassembling the data at the destination
Identifying the proper application for each communication stream through the use
of port numbers
Multiplexing the communications of multiple users or applications over a single
network
Managing the reliability requirements of applications

27. Which three statements describe a DHCP Discover message? (Choose

three.)
 The source MAC address is 48 ones (FF-FF-FF-FF-FF-FF).
 The destination IP address is 255.255.255.255.
 The message comes from a server offering an IP address.
 The message comes from a client seeking an IP address.
 All hosts receive the message, but only a DHCP server replies.
 Only the DHCP server receives the message.
Explanation: When a host configured to use DHCP powers up on a network it
sends a DHCPDISCOVER message. FF-FF-FF-FF-FF-FF is the L2 broadcast
address. A DHCP server replies with a unicast DHCPOFFER message back to
the host.
28. Which two protocols may devices use in the application process that sends
email? (Choose two.)
 HTTP
 SMTP
 POP
 IMAP
 DNS
 POP3
Explanation: POP, POP3, and IMAP are protocols that are used to retrieve email
from servers. SMTP is the default protocol that is used to send email. DNS may
be used by the sender email server to find the address of the destination email
server.
29. What is true about the Server Message Block protocol?
 Different SMB message types have a different format.
 Clients establish a long term connection to servers.
 SMB messages cannot authenticate a session.
 SMB uses the FTP protocol for communication.
Explanation: The Server Message Block protocol is a protocol for file, printer, and
directory sharing. Clients establish a long term connection to servers and when
the connection is active, the resources can be accessed. Every SMB message
has the same format. The use of SMB differs from FTP mainly in the length of the
sessions. SMB messages can authenticate sessions.
30. What is the function of the HTTP GET message?
 to request an HTML page from a web server
 to send error information from a web server to a web client
 to upload content to a web server from a web client
 to retrieve client email from an email server using TCP port 110
31. Which OSI layer provides the interface between the applications used to
communicate and the underlying network over which messages are transmitted?
 application
 presentation
 session
 transport
32. Which networking model is being used when an author uploads one chapter
document to a file server of a book publisher?
 peer-to-peer
 master-slave
 client/server
 point-to-point
Explanation: In the client/server network model, a network device assumes the
role of server in order to provide a particular service such as file transfer and
storage. In the client/server network model, a dedicated server does not have to
be used, but if one is present, the network model being used is the client/server
model. In contrast, a peer-to-peer network does not have a dedicated server.
33. What do the client/server and peer-to-peer network models have in common?
 Both models have dedicated servers.
 Both models support devices in server and client roles.
 Both models require the use of TCP/IP-based protocols.
 Both models are used only in the wired network environment.
Explanation: In both the client/server and peer-to-peer network models, clients
and servers exist. In peer-to-peer networks, no dedicated server exists, but a
device can assume the server role to provide information to a device serving in
the client role.
34. In what networking model would eDonkey, eMule, BitTorrent, Bitcoin, and
LionShare be used?
 peer-to-peer
 client-based
 master-slave
 point-to-point
Explanation: In a peer-to-peer networking model, data is exchanged between two
network devices without the use of a dedicated server. Peer-to-peer applications
such as Shareaz, eDonkey, and Bitcoin allow one network device to assume the
role of server, while one or more other network devices assume the role of client
using the peer-to-peer application.
35. What is a common protocol that is used with peer-to-peer applications such as
WireShare, Bearshare, and Shareaza?
 Ethernet
 Gnutella
 POP
 SMTP
Explanation: The Gnutella protocol is used when one user shares an entire file
with another user. A person would load a Gnutella-based application such as gtk-
gnutella or WireShare and use that application to locate and access resources
shared by others.

36. What is a key characteristic of the peer-to-peer networking model?

 wireless networking
 social networking without the Internet
 network printing using a print server
 resource sharing without a dedicated server
Explanation: The peer-to-peer (P2P) networking model allows data, printer, and
resource sharing without a dedicated server.
37. The application layer of the TCP/IP model performs the functions of what three
layers of the OSI model? (Choose three.)
 physical
 session
 network
 presentation
 data link
 transport
 application
Explanation: The network access layer of the TCP/IP model performs the same
functions as the physical and data link layers of the OSI model. The internetwork
layer equates to the network layer of the OSI model. The transport layers are the
same in both models. The application layer of the TCP/IP model represents the
session, presentation, and application layers of the OSI model.
38. What is an example of network communication that uses the client-server
model?
 A user uses eMule to download a file that is shared by a friend after the file
location is determined.
 A workstation initiates an ARP to find the MAC address of a receiving host.
 A user prints a document by using a printer that is attached to a workstation of
a coworker.
 A workstation initiates a DNS request when the user types www.cisco.com in the
address bar of a web browser.
Explanation: When a user types a domain name of a website into the address
bar of a web browser, a workstation needs to send a DNS request to the DNS
server for the name resolution process. This request is a client/server model
application. The eMule application is P2P. Sharing a printer on a workstation is a
peer-to-peer network. Using ARP is just a broadcast message sent by a host.
39. Which layer in the TCP/IP model is used for formatting, compressing, and
encrypting data?
 internetwork
 session
 presentation
 application
 network access
Explanation: The application layer of the TCP/IP model performs the functions of
three layers of the OSI model – application, presentation, and session. The
application layer of the TCP/IP model is the layer that provides the interface
between the applications, is responsible for formatting, compressing, and
encrypting data, and is used to create and maintain dialogs between source and
destination applications.
40. What is an advantage of SMB over FTP?
 Only with SMB can data transfers occur in both directions.
 Only SMB establishes two simultaneous connections with the client, making
the data transfer faster.
 SMB is more reliable than FTP because SMB uses TCP and FTP uses UDP.
 SMB clients can establish a long-term connection to the server.
41. A manufacturing company subscribes to certain hosted services from its ISP.
The services that are required include hosted world wide web, file transfer, and e-
mail. Which protocols represent these three key applications? (Choose three.)
 FTP
 HTTP
 DNS
 SNMP
 DHCP
 SMTP
Explanation: The ISP uses the HTTP protocol in conjunction with hosting web
pages, the FTP protocol with file transfers, and SMTP with e-mail. DNS is used
 to translate domain names to IP addresses. SNMP is used for network
management traffic. DHCP ic commonly used to manage IP addressing.

42. Which application layer protocol uses message types such as GET,
PUT, and POST?
 DNS
 DHCP
 SMTP
 HTTP
 POP3
Explanation: The GET command is a client request for data from a web server. A
PUT command uploads resources and content, such as images, to a web server.
A POST command uploads data files to a web server.
43. What type of information is contained in a DNS MX record?
 the FQDN of the alias used to identify a service
 the IP address for an FQDN entry
 the domain name mapped to mail exchange servers
 the IP address of an authoritative name server
Explanation: MX, or mail exchange messages, are used to map a domain name
to several mail exchange servers that all belong to the same domain.
44. Which three protocols operate at the application layer of the TCP/IP model?
(Choose three.)
 ARP
 TCP
 UDP
 FTP
 POP3
 DHCP
Explanation: FTP, DHCP, and POP3 are application layer protocols. TCP and
UDP are transport layer protocols. ARP is a network layer protocol.
45. Which protocol is used by a client to communicate securely with a web server?
 SMTP
 SMB
 IMAP
 HTTPS
Explanation: HTTPS is a secure form of HTTP used to access web content
hosted by a web server.
46. Which applications or services allow hosts to act as client and server at the same
time?
 client/server applications
 email applications
 P2P applications
 authentication services
Explanation: P2P applications allow the clients to behave as servers if needed.
When using authentication services, email exchange, and client/server
applications, one host acts as server and the other acts as client at all times.

47. What are two characteristics of peer-to-peer networks? (Choose two.)

 scalability
 one way data flow
 decentralized resources
 centralized user accounts
 resource sharing without a dedicated server
Explanation: Peer-to-peer networks have decentralized resources because every
computer can serve as both a server and a client. One computer might assume
the role of server for one transaction while acting as a client for another
transaction. Peer-to-peer networks can share resources among network devices
without the use of a dedicated server.
48. Which scenario describes a function provided by the transport layer?
 A student is using a classroom VoIP phone to call home. The unique identifier
burned into the phone is a transport layer address used to contact another
network device on the same network.
 A student is playing a short web-based movie with sound. The movie and
sound are encoded within the transport layer header.
 A student has two web browser windows open in order to access two web sites.
The transport layer ensures the correct web page is delivered to the correct
browser window.
 A corporate worker is accessing a web server located on a corporate network.
The transport layer formats the screen so the web page appears properly no
matter what device is being used to view the web site.
Explanation: The source and destination port numbers are used to identify the
correct application and window within that application.
49. Which three layers of the OSI model provide similar network services to those
provided by the application layer of the TCP/IP model? (Choose three.)
 physical layer
 session layer
 transport layer
 application layer
 presentation layer
 data link layer
 Explanation: The three upper layers of the OSI model, the session, presentation,
and application layers, provide application services similar to those provided by
the TCP/IP model application layer. Lower layers of the OSI model are more
concerned with data flow.
50. A PC that is communicating with a web server has a TCP window size of 6,000
bytes when sending data and a packet size of 1,500 bytes. Which byte of information
will the web server acknowledge after it has received two packets of data from the
PC?
 3001
 6001
 4500
 6000
51. A PC that is communicating with a web server has a TCP window size of 6,000
bytes when sending data and a packet size of 1,500 bytes. Which byte of information
will the web server acknowledge after it has received three packets of data from the
PC?
 4501
 6001
 6000
 4500
52. A PC that is communicating with a web server has a TCP window size of 6,000
bytes when sending data and a packet size of 1,500 bytes. Which byte of information
will the web server acknowledge after it has received four packets of data from the
PC?
 6001
 3001
 1501
 1500
60. A client creates a packet to send to a server. The client is requesting TFTP
service. What number will be used as the destination port number in the sending
packet?
 69
 67
 53
 80
61. A client creates a packet to send to a server. The client is requesting FTP service.
What number will be used as the destination port number in the sending packet?
 21
 69
 67
 80
 62. A client creates a packet to send to a server. The client is requesting SSH service.
What number will be used as the destination port number in the sending packet?
 22
 69
 67
 80
63. A client creates a packet to send to a server. The client is requesting HTTP
service. What number will be used as the destination port number in the sending
packet?
 80
 67
 53
 69
64. A client creates a packet to send to a server. The client is requesting POP3
service. What number will be used as the destination port number in the sending
packet?
 110
 67
 53
 69
 443
 161
 80
65. A client creates a packet to send to a server. The client is requesting telnet
service. What number will be used as the destination port number in the sending
packet?
 23
 443
 161
 110
67. A client creates a packet to send to a server. The client is requesting SNMP
service. What number will be used as the destination port number in the sending
packet?
 161
 443
 110
 80
68. A client creates a packet to send to a server. The client is requesting SMTP
service. What number will be used as the destination port number in the sending
packet?
 25
 443
 161
 110
69. A client creates a packet to send to a server. The client is requesting HTTPS
service. What number will be used as the destination port number in the sending
packet?
 443
 161
 110
 80