Product Application Index

Legend
Green Product Synthetic Rubber Based Adhesive

HVAC Ducting Chilled Water / Process Piping *Under deck Insulation Over deck Insulation Wall Panelling
Resin Bonded
Product Nitrile Rubber Resin Bonded
Expanded PIR Ducts &
Nitrile Rubber
Fibre Glass Expanded Puff Pipe
Nitrile Rubber Expanded Polyurethane Resin Bonded Fibre Nitrile Rubber Expanded Resin Bonded Fibre
Expanded Polystyrene /
/ Cross Linked Fibre Glass / Cross Linked / Cross Linked Polystyrene / Insulation Sheets Glass Wool/Rock Wool / Cross Linked Polystyrene / Glass Wool/Rock
Polystyrene Panels Wool/Rock Wool Polystyrene Section Extruded Polystyrene
Polyethylene Wool/Rock Wool Polyethylene Polyethylene Extruded Polystyrene (Puff ) (App. On Roof .) Polyethylene Extruded Polystyrene Wool( app. On wall)
(App. On Pipe)

Adhesives

Fevicol AC Duct King Eco fresh

Fevicol AC Duct King Optima

Fevicol AC Duct King

Fevicol AC Prefab

Fevicol SR 998

Fevicol 1 K PUR FR

Protective Coatings
Fevicol AC Duct King Lag Coating
AF 5590
Maintenance Products

USPRO Construction Foam (*) App. On EPS

Dr. Fixit Silicone Sealant GPS(*)

(*) TDS & MSDS Available on request

*Mechanical fasteners are recommended for under deck insulation

*Mechanical fasteners like screwing/clamping are mandatory for Fevicol 1K PUR FR usage for all recommended applications
Technical Data Sheet

Technical Data Sheet

FEVICOL AC DUCT KING ECO FRESH
Technical Data Sheet

Description Recommended Method of Application

FEVICOL AC DUCT KING ECO FRESH is a water based environment friendly synthetic resin adhesive, specially • Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
developed for adhesion of Nitrile Rubber, EPS, and XLPE for multiple applications in HVAC & R Insulation. • Stir the adhesive well before use to have a homogeneous material prior to application
• Apply the adhesive by spreader only in thin uniform layer on both the substrates.
FEVICOL AC DUCT KING ECO FRESH is a Green product due to its very low VOC and thus makes it suitable
• When glass wool/rock wool substrates are bonded, application of adhesive is done Only on Duct/Pipe/
for Green Certified projects.
Concrete substrates
• Allow to develop tack (Best judged by change in color from whitish to colourless)
Recommended Application Area • For faster tack development & bonding, thin layer of adhesive is mandatory
• Air conditioned Area for Ducting with Nitrile Rubber, EPS, Glass Wool, Rock Wool and Chilled Water Piping • Once the tack is developed bonding of the substrates can be done even after 2 hrs unlike rubber
with Glass Wool, Rock Wool, EPS, Nitrile Rubber based adhesive
Attributes • Press it uniformly by hand pressure taking care that no air pockets are formed
­­– Low VOC – Improves the IAQ to meet the compliance guidelines of Green Buildings • Cure for 24 hrs at ambient temperature
– Fire Resistant – Prevents spread of Flames and Smoke
– Extremely Mild Smell – Excellent for Low Ventilated Areas and Safe for Occupants / Applicators Precautions & Limitations
– Low Application Cost – Higher coverage & hence low adhesive cost per area Keep the containers closed when not in use.
– Strong Bonding – Very strong Bonding ensuring zero reworking costs
MSDS is available on request.
• Under deck / Over deck Insulation with Nitrile Rubber, EPS, Glass Wool, Rock Wool
Attributes Typical Data
– Good Tack – Ensures the Nitrile Rubber bonds well with the Concrete Surface • Appearance : Off White Opaque Paste
– Low VOC – Improves the IAQ to meet the compliance guidelines of Green Buildings • Viscosity at 30° ±1°C : 40-80 poise
– Fire Resistant – Prevents spread of Flames and Smoke • Temp. Resistance : -20°C to 60°C
– Higher Coverage – Large Insulated Surface Areas can be bonded • VOC : < 5 gms / litre
• Coverage by Spreader : 7m2 / kg / coat
Standards Conformation (Under identical lab test conditions at ambient, on smooth nonporous substrate on single side application)
• Surface Burning Characteristics - ASTM E 84
• IGBC/LEED VOC Shelf Life & Storage
• Class A/1 Product Exova warringtonfire 12 months from the date of manufacture & when stored in a dry and cool place in the original unopened
container ( Recommended Storage temperature: 20-300C)
Type of Building / Application
• Hospitals & Hospitality Packing
20 kg Plastic Drum
• Pharmaceutical & Beverage Industries
• Green Buildings (Due to continuous product improvements, the data mentioned in the TDS is subject to change without prior
• Research Centre and Laboratory intimation)
• Recording Studios
• High Density Areas such Malls, Airports, Auditoriums etc.

Unique Features and Benefits

• Fevicol AC Duct king Eco Fresh conforms to ASTM E 84 test for Low Flame Spread Index
• Fevicol AC Duct king Eco Fresh is certified as a Class A product by Exova Warringtonfire, a renowned testing
UK Based testing agency
• Very LOW VOC ( < 5 gms / litre ), excellent for Green Certified projects
• Ideal for improving the Indoor Air Quality ( IAQ ) as per the Green Building Standards
• Fire Resistant Water Based Formulation - Makes the Ducting / Chilled Water Piping safer
against Fire hazards
• Excellent Spreadability - Lower application costs ensures a better Cost Benefit than rubber base adhesive.
• Mild Smell and Low Toxicity makes it Safe to use and Handle
• Excellent tack - Longer Tack retention/open time
NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
2 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 3
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

FEVICOL AC DUCT KING OPTIMA
Technical Data Sheet

Description Typical Data

FEVICOL AC DUCT KING OPTIMA is a Synthetic Rubber based, Low VOC product specially developed for various • Appearance : Very Light Brown Liquid with Yellowish ting
applications in HVAC & R industry. • Viscosity at 30° ±1°C : 10-15 poise
• Temp. Resistance : -20°C to 85°C
FEVICOL AC DUCT KING OPTIMA is an excellent adhesive to bond various insulation materials such as Nitrile
• Specific Gravity@30° ± 1°C : 0.865 – 0.895
Rubber or Cross Linked Polyethylene Foam to Galvanized Iron or Aluminium duct surface.
• VOC : 311.36 gms / litre
• Coverage by spreader : 4.5 m2 / litre / coat
Recommended Application Area (Under identical lab test conditions at ambient, on smooth nonporous substrate on single side application)
• AC Ducting / Chilled Water Piping/ Air Ventilation System - Fabrication of AC ducts - To bond Nitrile Rubber,
Crossed linked Polyethylene, Glass Wool/Rock Wool to Duct surface Shelf Life & Storage
• Chilled Water piping - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool to MS 12 months from the date of manufacture & when stored in a dry and cool place in the original unopened
pipe lines container ( Recommended Storage temperature: 20-300C)
Attributes Packing
– Low VOC – Improves the IAQ
– Mild Smell – Excellent for Low Ventilated Areas and Safe for Occupants / Applicators 30 Litre Drum
– Low Application Cost – Keeps the costs under control
– Strong Bonding – Very strong Bonding ensuring zero reworking costs (Due to continuous product improvements, the data mentioned in the TDS is subject to change without prior
intimation)
Unique Features and Benefits
• Low VOC product ideal for low ventilated sites
• No added Benzene Formulation, ensures that the product is harmless to use - Safe to use & Handle
• Mild smell of the product does not cause any irritation to the occupants and applicators
• Excellent Spread and ease of application
• Fast Drying and Strong Bonding
• High coverage gives a lower coverage costs

Recommended Method of Application

• Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply Fevicol AC Duct King Optima on both the substrates uniformly by brush. First on Non porous substrate
& then on to porous substrates.
• When Glass Wool/Rock Wool substrates are bonded application of adhesive is done Only on Duct/Pipe/
Concrete substrates
• Once the adhesive becomes touch dry (when tack is developed) press both the substrates together ensuring
uniform contact so that air pockets are not formed
• Cure for 24 hrs at ambient temperature

Precautions & Limitations

Keep the containers closed when not in use. The adhesive contains flammable solvents so precautions are
required in storing. Care to be taken so that Adhesive or vapour from the adhesive will not come in contact with
fire spots, naked flames or welding spots on shop floor/work site.
MSDS is available on request.

NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
4 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 5
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

FEVICOL AC DUCT KING
Technical Data Sheet

Description
FEVICOL AC DUCT KING is a Synthetic Rubber based adhesive specially developed to cater various insulation
Precautions & Limitations
material applications in HVAC & R industry. Keep the containers closed when not in use. The adhesive contains flammable solvents so precautions are
required in storing. Care to be taken so that Adhesive or vapour from the adhesive will not come in contact with
FEVICOL AC DUCT KING is recommended as an adhesive to bond Galvanized Iron or Aluminium duct surface to fire spots, naked flames or welding spots on shop floor/work site.
Nitrile Rubber or Crossed Linked Polyethylene Foam, to provide insulation to AC Ducts, Chilled Water Pipe lines,
and Reaction Vessels in various industrial & residential projects. MSDS is available on request
The product can be conveniently applied in low ventilated sites at remote places, as the smell is very mild.
Typical Data
Recommended Application Area • Appearance : Light Yellow Liquid
• Viscosity at 30° ±1°C : 8-12 poise
• AC Ducting / Chilled Water Piping/ Air Ventilation System - Fabrication of AC ducts - To bond Nitrile Rubber,
• Temp. Resistance : -20°C to 85°C
Crossed linked Polyethylene, Glass Wool/Rock Wool to Duct surface
• Specific Gravity@30° ± 1°C : 0.83 to 0.85
• Chilled Water piping - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool to MS
• Coverage by spreader : 6 m2 / litre / coat
pipe lines
(Under identical lab test conditions at ambient, on smooth nonporous substrate on single side application)
• Acoustic Insulation - To Bond Nitrile Rubber to Concrete walls, Vertical surfaces & Duct lining with
Nitrile rubber Shelf Life & Storage
• Wall panelling for cold storages - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool
12 months from the date of manufacture & when stored in a dry and cool place in the original unopened
to smooth Concrete wall surface
container ( Recommended Storage temperature: 20-300C)
• Under deck/Over deck Insulation - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock
Wool to smooth Concrete wall surface (mechanical fasteners are recommended for under deck insulation)
Packing
Features 30 Litre Drum & 5 Litre metal container

• No added Benzene Formulation

(Due to continuous product improvements, the data mentioned in the TDS is subject to change
• Excellent tack without prior intimation)
• High Spreadability & ease of application
• Strong Bond durability (aging resistance)
• Excellent adhesion to multiple substrates vis. Nitrile Rubber, Glass wool, XLPE, Galvanized Iron
& Aluminium

Unique Features and Benefits

• Very Mild smell ensures the applicators and users will not be harmed
• No added Benzene ensures that the Health of the applicators and users is not harmed
• One adhesive for multiple application
• Industry first Adhesive product exclusively for Ducting and Chilled Water Piping

Recommended Method of Application

• Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
• Stir the adhesive well before use to have a homogeneous material prior to application
• Apply Fevicol AC Duct King on both the substrates uniformly by spreader / brush. First on Non porous
substrate & then on to porous substrates.
• When Glass Wool/Rock Wool substrates are bonded application of adhesive is done on Duct/Pipe/Concrete
substrates
• Once the adhesive becomes touch dry (when tack is developed) press both the substrates together ensuring
uniform contact so that air pockets are not formed
• Cure for 24 hrs at ambient temperature

NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
6 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 7
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

FEVICOL AC PREFAB
Technical Data Sheet

Description Typical Data

FEVICOL AC PREFAB is a new generation Synthetic Rubber based adhesive, specially developed for bonding Pre • Appearance : Light Brown Medium Viscous Liquid
Insulated Panels made of PIR, PU foam, Phenolic foam etc. • Viscosity at 30° ± 1°C : 17-22 poise
• Temp. Resistance : -20°C to 85°C
The Adhesive is fast drying adhesive & develops quick grab which is preferred for faster rate of fabrication.
• Specific Gravity@30° ± 1°C : 0.80 to 0.84
Fevicol AC Prefab can be easily applied at all ambient conditions by spreader, brush. It is an ideal adhesive for • Coverage by Spreader : 4.5 m2 / Litre / coat
quick assembly of pre fabricated panels for on site construction of AC ducts. (Under identical lab test conditions at ambient, on smooth nonporous substrate on single side application)

Areas of Application Shelf Life & Storage

AC Ducting / Air Ventilation Construction - To bond angular PIR, PU Foam or Phenolic Foam surface 12 months from the date of manufacture & when stored in a dry and cool place in the original unopened
container ( Recommended Storage temperature: 20-300C)
Features & Benefits
Packing
• No added Benzene Formulation
30 Litre Drum
• Faster Drying at ambient temperature
• Quick Grab development (Due to continuous product improvements, the data mentioned in the TDS is subject to change
• Excellent Spreadability without prior intimation)
• Safe to use & Handle
• Excellent Water & aging Resistance
• Long shelf Life

Recommended Method of Application

• Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
• Apply the adhesive by spreader/Brush in thin uniform layer on both the surfaces
of PIR, PU/ Phenolic Foam surfaces
• Allow to develop the tack. Allow an open time of 3-4 minutes. If the surface is porous apply a second coat &
allow to dry for 3-4 minutes
• When tack is developed, press firmly & uniformly by hand, taking care that no air pockets are formed
• Allow to Cure the duct assembly for 24 hrs at ambient temperature with good contact pressure

Precautions & Limitations

Keep the containers closed when not in use. The adhesive contains flammable solvents so precautions are
required in storing. Care to be taken so that Adhesive or vapours from the adhesive will not come in contact with
fire spots, naked flames or Welding spots on shop floor/ work site.

MSDS is available on request.

NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
8 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 9
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

FEVICOL SR 998
Technical Data Sheet

Description Recommended Method of Application

FEVICOL SR 998 is a Superior Adhesive recommended to bond Galvanized Iron or Aluminium duct surface to • Clean the substrates to be bonded so that they are free from Dust / Rust / Oil etc
Nitrile Rubber or Crossed Linked Polyethylene Foam to provide insulation to AC Ducts, Chilled Water Pipe Lines, • Stir the adhesive well before use
and Reaction Vessels in various industrial & residential projects. • Apply Fevicol SR 998 on both the substrates uniformly by spreader / brush. First on Non porous substrate &
FEVICOL SR 998 is a Synthetic Rubber adhesive specially developed taking into consideration the application then on to porous substrates.
needs & performance requirements of insulation market segments. • When Glass Wool/Rock Wool substrates are bonded, application of adhesive is done Only on Duct/Pipe/
Concrete substrates
Recommended Application Area • Once the adhesive becomes touch dry( when tack is developed) press both the substrates
together ensuring uniform contact so that air pockets are not formed
• AC Ducting / Chilled Water Piping/ Air Ventilation System - To bond Nitrile Rubber, XLPE,
• Cure for 24 hrs at ambient temperature
Glass Wool /Rock Wool to Duct surface
• Chilled Water piping - To bond Nitrile Rubber, XLPE, and Glass Wool/Rock Wool to MS pipe lines Precautions & Limitations
• Acoustic Insulation - To Bond Nitrile Rubber to Concrete walls, Vertical surfaces & Duct
Keep the containers closed when not in use. The adhesive contains flammable solvents so precautions are
lining with Nitrile rubber
required in storing. Care to be taken so that Adhesive or vapour from the adhesive will not come in contact with
• Wall panelling for cold storages - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool to
fire spots, naked flames or welding spots on shop floor/work site.
smooth Concrete wall surface
• Under deck/Over deck Insulation - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool MSDS is available on request.
to smooth Concrete wall surface (mechanical fasteners are recommended for under deck insulation)
Typical Data
Type of Building / Application
• Appearance : Dark Brown Liquid
• Hospital and Hospitality • Viscosity at 30° ±1°C : 20-25 poise
• Pharmaceuticals and Beverages • Temp. Resistance : -30°C to 96°C
• Research Centre and Laboratory • Specific Gravity@30° ± 1°C : 0.84 to 0.88
• Recording Studios • Coverage by Spreader : 5.0 m2 / litre / coat
• Cold Storages (Under identical lab test conditions at ambient, on smooth nonporous substrate on single side application)
• High Density Areas such Malls, Airports, Auditoriums etc..
Shelf Life & Storage
Unique Features 12 months from the date of manufacturing, & when stored in a dry and cool place in the original unopened
container ( Recommended Storage temperature: 20-300C)
• No added Benzene Formulation
• Excellent Performance for Curved surfaces
Packing
• Excellent Spring back Resistance 25 Litre Drum & 1, 2, 5 Litre metal container
• Superior performance at Sub Zero Temperatures
• Excellent Water and Heat Resistance (Due to continuous product improvements mentioned in this TDS is subject to change without prior intimation)
• Excellent Spreadability & ease of application
• Rapid and Strong strength development
• Excellent Bond durability (aging resistance)

Benefits
• Mild Smell and hence can be used in Low Ventilated sites or remote places.
• Ideal for Round Surfaces
• Ideal for Refrigeration applications

NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
10 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 11
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

FEVICOL AC DUCT KING LAG COATING AF 5590
Technical Data Sheet

Description • IT / ITES, Commercial & Public Building & Spaces

FEVICOL AC DUCT KING LAG COATING AF 5590 is an Anti Fungal, UV Resistant, Vapour Barrier coating water • VRV piping system based Air-conditioned buildings
based, environment friendly, specially developed for protecting Insulated Duct, Chilled Water & VRV Pipes
against Fire & Flame, Mechanical Damage, Harmful UV, Fungal growth & Condensation. (insulated with Nitrile Recommended Method of Application
Rubber, XLPE, Glass wool, Rock wool, PU.) etc. • Clean the substrates to be bonded, so that they are free from Dust/Rust/Oil/Moisture
Fevicol AC Duct King Lag Coating AF 5590 is non flammable Green product with low VOC, extremely • Stir Fevicol AC Duct King Lag Coating AF 5590 well before use to have a homogeneous material prior
suitable for Green Certified projects. to application
• Apply Fevicol AC Duct King Lag Coating AF 5590 on insulated surface uniformly by brush
Recommended Application Area • Immediately wrap Glass or Canvas cloth tightly with over lapping so that no gaps are left and no
air pockets are formed
• Air conditioned Area for Ducting, Chilled Water Piping
• Allow to dry and apply additional coating on wrapped cloth to achieve smooth, neat coated surface
Attributes / Reason for Recommendation
• Allow to cure for minimum 24 hrs at ambient temperature
– Fire Resistant – Prevents spread of Flames and Smoke
– Anti Fungal – Prevents the fungal growth and betters the IAQ
Precautions & Limitations
– Mechanical Protection – protects Insulation material from mechanical damage.
Increases energy efficiency & overall life of the overall system Keep the containers closed when not in use.
• Non Air conditioned / Exposed Area Ducting, Chilled Water Piping, VRV Piping
Attributes / Reason for recommendation MSDS is available on request.
– Strong Mechanical Protection – Imparts Excellent External strength to Ducts and Pipes
– UV Resistant – Ensures the longevity of the Insulated Surface Typical Data
– Vapour Barrier – Prevents the Water Seepage and Heat loss thereof • Appearance : Milky White Thixotropic Opaque paste
– Anti Fungal – Prevents the Fungal Growth in the Insulation Cracks • Viscosity at 30° ±1°C : 500 - 950 poise
• Wet Flammability (D 3278) : No flash to boiling
Standards Conformation • Temp. Resistance : -18°C to 80°C
• UL classified for Surface Burning Characteristics ( UL 723 ) • Specific Gravity@30° ±1°C : 1.19 to 1.27
• % VOC (gms/Lit) : < 1 gms / litre
• Fungal Resistance - ASTM D 5590
• Coverage by Brush : 1.5-2m2 / litre / coat (with recommended
• Flammability Resistance – ASTM D 4804
quality of Glass Cloth)
• Weathering Resistance - ASTM D 6695 (Under identical lab test conditions at ambient, on smooth nonporous substrate on single side application)
• Wet Flammability Resistance - ASTM D 3278
• IGBC/LEED VOC Shelf Life & Storage
18 months from the date of manufacture & when stored in a dry and cool place in the original unopened
Unique Features and Benefits container ( Recommended Storage temperature: 20-300C)
• Reduction in Water vapour penetration on exposed insulated Nitrile Rubber surfaces thereby increasing the
life of the system Packing
• Fevicol AC Duct King Lag Coating AF 5590 further prevents the Fungal growth / Water seepage on the 30 Litre Plastic Drum
surface cracks
• Gives the protection against UV / Atmospheric Heat, which reduces the maintenance and re-working and (Due to continuous product improvements mentioned in this TDS is subject to change without prior intimation)
re-installation costs
Fevicol AC Duct King Lag Coating AF 5590 R-27225
• Excellent protection against fire and smoke hazards
• Gives a High Surface strength to the Ducting / Chilled Water Piping
• Faster and Cost Effective site completion as compared to Sand Cement Plaster and Aluminum cladding
• Available in Multiple shades to suit the Legend and Facade requirement
Adhesives
• Protection against in bird perching Surface Burning Characteristics
• Prevents the probable ingress of VOC present in low engineered adhesive through the Supply/Return Air Applied to ¼ inch (6.4 mm) Inorganic Reinforced Cement Board
Flame Spread 05
becouse of the tight vapour barrier caoting Smoke Developed 10
Number of coats 01
Tested as applied at a coverage of 40 sq ft per gal
Type of Building / Application Flash point of liquid adhesive (closed cup) – not flash to boiling
4PG3
• Hospitals & Hospitality
NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
• Pharmaceutical & Beverage Industries are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
12 • Green Buildings
problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 13
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

FEVICOL 1K PUR FR
Technical Data Sheet

Description Typical Data

FEVICOL 1K PUR FR is single component ready to use moisture curing Adhesive, Ideally developed for bonding • Appearance : Pale yellow viscous clear liquid
pre fabricated PIR or Phenolic Sheet, Nitrile rubber, XLPE, Expanded polystyrene, PUFF to Concrete/ Mat • Viscosity at 30°C : 40-80 poise
Galvanized Iron or MS for Chilled water Piping, Hot water Piping, Under deck, Over deck or Wall Paneling • VOC content : 10 gms/ Lit max
application with the help of screwing or clamping. It Can be also be used for bonding metallic brackets at the • Open Time : 10 to 15 minutes @ 30oC. Higher temperature and higher percentage
edges to strengthen the duct assembly in pre fabricated PIR or Phenolic duct construction. It is flame proof • Final Bond Strength : After 24 hours
adhesive which does not catch fire while wet or cured. Fevicol 1K PUR FR cures by reacting with atmospheric • Coverage : 7 M2 /Kg
moisture to exhibit tough elastic bond. The product has excellent weathering resistance in the cured state. (Under identical lab test conditions at ambient, on smooth non-porous substrate on single side application)

Fevicol 1K PUR FR is non flammable Green product with low VOC, extremely suitable for Green Certified Shelf Life & Storage
projects. Shelf life is 9 months from the date of manufacturing & when stored in a dry and cool place in the original
unopened container ( Recommended Storage temperature: 20-300C)
Areas of Application
• Chilled Water Piping- To bond Nitrile, Expanded Polystyrene, XLPE to MS(Bonding Can be done even in Packing
running condition of Chilled water Pipes, clamping required ) • 20kg Metal drum
• Hot Water Piping- To bond Expanded Polystyrene to MS.(Hot water upto 800C)
• UnderDeck, OverDeck & Wall Paneling– To bond Nitrile Rubber, XLPE, Expanded PolyStyrene, Pre fabricated (Due to continuous product improvements mentioned in this TDS is subject to change without prior intimation)
PIR or Phenolic duct, PUF to Concrete / GI/MS panel (Screwing or Clamping is required)
• Prefabricated Ducts - To Bond Metallic/PVC Brackets At the edges & corners of PIR or Phenolic ducts

Features & Benefits

• Fast setting
• Low VOC —> Green product
• Non flammable
• Good adhesion to metal & PIR or Phenolic Foams Room Temperature application.
• Ease of application
• No need of shutdown for Chilled water piping system

Recommended Method of Application

• Apply adhesive on Nitrile rubber, XLPE, Expanded polystyrene, PIR panel, PUFF by spreader uniformly, apply
thick coat of adhesive if bonding surface is concrete.
• Wet the concrete /GI/MS surface by spraying little amount of water.
• Then Press the Nitrile rubber, XLPE, Expanded polystyrene, PIR panel on wall within 10 mins after adhesive
application and screw or Clamp bonded substrate for at least 15-30 mins.
• For Metallic/PVC Bracket to PIR duct bonding, Apply adhesive on Metallic brackets, edges & corners of
Prefabricated Duct & press firmly with good contact pressure.
• A strong bond is achieved after 2-3 hrs at ambient condition & optimum strength is achieved after 24 hrs.

Precautions & Limitations

MSDS is available on request.
The container to be closed tightly after use as product is moisture curable. Use of Protective Hand gloves &
goggles is strongly recommeded to avoid skin contact

NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
14 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 15
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Technical Data Sheet

Technical Data Sheet

ABBREVIATIONS AND GLOSSARY

Glossary Pressure Sensitive Adhesive: Pressure-sensitive adhesives (PSA) form a bond by the application of light
pressure to marry the adhesive with the adherent. The bond forms because the adhesive is soft enough to flow
Adhesive: A Substance capable of holding materials together by surface attachment. This is a general term
(i.e. “wet”) to the adherent. The bond has strength because the adhesive is hard enough to resist flow when
and includes physical forms like liquid, pastes, glues, cements etc. The adhesives are further classified as
stress is applied to the bond.
synthetic or natural
Sealant: A material used to fill a joint for water proofing, weathering or arresting leakages. Generally in putty and
Adhesion: The state in which two surfaces are held together at an interface by forces, or interlocking
thick paste forms
action or both
Smoke developed index: Smoke developed index is a measure of the concentration of smoke a material emits
Benzene: Benzene is carcinogenic solvent
as it burns
Bond strength: The force per unit area or length necessary to rupture the bond. e.g. shear test,
Solvent: A medium in which a substance is dissolved.
tensile test, peel test
Specific Gravity: Specific gravity is the ratio of the density of a substance to the density (mass of the same
Contact Adhesive: Contact adhesives are used in strong bonds with high shear-resistance. Natural rubber,
unit volume) of a reference substance. Apparent specific gravity is the ratio of the weight of a volume of the
polychloroprene (Neoprene) and water based acrylic adhesive are commonly used contact adhesives. Contact
substance to the weight of an equal volume of the reference substance.
adhesives must be applied to both surfaces and allowed some time to dry before the two surfaces are pushed
Spreader: A thin metal plate which use to coat or spread adhesive on substrate
together. Once the surfaces are pushed together, the bond forms very quickly.
Tack: The degree of surface stickiness of the adhesive; influences the strength of the bond between wetted
Cure: Change in properties of material by chemical reaction, which may be condensation, polymerization or
surfaces.
vulcanization. Usually accomplished by the action of heat, catalyst, alone or in combination with or without
pressure. In simple words, it can be described as time required for hardening or setting of adhesives Viscosity: Resistance Offered by liquid to flow. Highly temp dependent, Higher the temp - lower the viscosity
and vice versa
Density: Mass per unit Volume expressed in grams per cubic centimeter for solids & liquids
Exova Warringtonfire: Exova Warringtonfire is a world-leader in fire safety technology with capabilities Abbreviations
including reaction to fire and fire resistance testing. Exova Warringtonfire offers independent fire testing, fire
engineering and fire certification services that are a globally-respected mark of quality assurance. For over ASTM: American Society for Testing and Materials
40 years, Exova Warringtonfire has been helping customers achieve regulatory compliance, market entry or EPS: Expanded Polystyrene
competitive advantage GI: Galvanised Iron
Flammable: A volatile liquid or gas, which has flash point of 30°F or lower IAQ: Indoor Air Quality
Flash point: The temperature at which a liquid or volatile solid gives off Vapours sufficient to form an ignitable IEQ: Indoor Environmental Quality
mixture with air near substance of liquid or within the test vessel
MS: Mild Steel
Flame Spread Index: Is a ranking derived by laboratory standard test methodology of a material’s propensity to
MSDS: Material Safety Data Sheet
burn rapidly and spread flames
PIR: Poly Iso Cyanurate
Good Spread ability: Ability to cover more area in less quantity.
PU: Poly Urethane
Green Building: A green building is one which uses less water, optimises energy efficiency, conserves
natural resources, generates less waste and provides healthier spaces for occupants, as compared to a TDS: Technical Data Sheet
conventional building. VOC: Volatile organic Compound
Heat: A form of energy associated with and proportional to molecular motion. It can be transferred from one XLPE: Crosslinked Polyethylene
body to another by Radiation, conduction or convection UL : Underwriters Laboratory
Heat Transfer: Transmission of Thermal Energy from one location to another by means of temperature in
gradient existing between locations Standards
Homogeneous: Material consisting of uniformity/similarity in elements ASTM D 3278: Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
Insulation (Thermal): Thermal Insulation is the reduction of heat transfer (the transfer of thermal Energy ASTM D 4804: Standard Test Method for Determining the Flammability Characteristics of Non rigid Solid Plastics
between objects of differing temperature) between objects in Thermal contractor in the range of radiative ASTM D 5590: Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to
influence. Thermal insulation can be achieved with specially engineered methods or processes as well as with Fungal Defacement
suitable object shapes & materials
ASTM D 6695: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
IAQ: Indoor Air Quality
ASTM E 84: Standard Test Method for Surface Burning Characteristics of Building Materials
Open time (Tack development time): The time required for solvent evaporation & tack development highly UL 723: Standard test method for surface burning characteristics of building materials
dependent on humidity & climatic conditions
Plastics: Natural or artificially prepared organic polymers of low extensibility as compared with rubber,
which can be moulded, extruded cut and worked in to variety of rigid or Non rigid objects. The first commercial
plastic was celluloid
NOTE : The Product information & application details given by the company & its agents has been provided in good faith and meant to serve only as a general guideline during usage. Users
are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the
16 problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expresses or implied guarantee/ warranty as to the results obtained. The 17
company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products.
Rev. No. 0.03 / Feb 2015
Fevicol
HVAC and Insulation Adhesives, 1st Floor Marketing Block, Ramkrishna Mandir Road, Andheri (E) Mumbai 400 059 INDIA
15FV00129

T +91-22 3308 7369 | E [email protected]