Scribd
Upload
538 views1 page

PVC Suspension K-70

PVC K-70 is a fine white powder obtained through the polymerization of vinyl chloride suspension. It is recommended for extrusion or calendering of plasticized profiles used in footwear soles, outdoor upholstery, and wire and cable insulation. The document provides the technical quality conditions and specifications of PVC K-70, including appearance, K-value, moisture content, bulk density, plasticizer absorption rate, and impurities. It also describes the packaging, storage, and safety measures for handling PVC K-70.

Uploaded by

ÜNAL AYDIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
538 views1 page

PVC Suspension K-70

PVC K-70 is a fine white powder obtained through the polymerization of vinyl chloride suspension. It is recommended for extrusion or calendering of plasticized profiles used in footwear soles, outdoor upholstery, and wire and cable insulation. The document provides the technical quality conditions and specifications of PVC K-70, including appearance, K-value, moisture content, bulk density, plasticizer absorption rate, and impurities. It also describes the packaging, storage, and safety measures for handling PVC K-70.

Uploaded by

ÜNAL AYDIN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

POLYVINYLCHLORIDE SUSPENSION for plastified processing

PVC K-70

GENERAL DESCRIPTION:
It is a fine, white, odourless powder, soluble in ketones and tetrahydrofuran, that is obtained
through the polymerization of vinyl chloride suspension.

TECHNICAL QUALITY CONDITIONS:


No. Technical date U/M K-70 Testing methods

1 Appearance fine white Visual


powder
2 K-value 69.0-71.0 EN ISO 1628-3:2010
3 Moisture and volatile constituents, % 0.4 ASTM D 3030-95
max.
4 Bulk density (vol.) g/cm3 0.45-0.51 ISO 60-77
5 Plasticizer absorption, min. % 95 ASTM 1755-92
6 Calcinations residues max. % 0.04 EN ISO 3451/5-02
7 Residue on 0.250 mm. sieve, max. % 1 EN ISO 4610-98
8 Residue on 0.063 mm. sieve, min. % 95 EN ISO 4610-98
6 Impurities max. No/dm2 4 EN ISO 1265-98
9 Vinyl chloride residue, max. Ppm. 1 ISO 6401-85

Note: The above characteristics are tested on an average sample collected from 5% of the
packagings in a batch.

APPLICATIONS:
PVC K-70 is recommended for plasticized profiles extrusion or calendering (footwear soles,
sheeting for outdoor upholstery use, wire and cable insulation).

PACKAGING-STORAGE:
It is packed in:
- 25kg net bags of polypropylene lined with polyethylene, (permissible limit ± 0.2kg)
- paper bags 25kg net (permissible limit ± 0.15kg), palletized and wrapped with polyethylene film
- 1000; 1100 or 1300kg big bags of polypropylene lined with polyethylene (permissible limit ± 5kg)
- silo wagons provided either by the supplier or by the customer.

The product should be stored in cool, dry and well vented areas far from inconsistent materials.
Polyvinyl chloride presents the risk of electrostatic energy storage, that is why the storage silos are
earthed.

SAFETY MEASURES:
Before handling and using this product, the personnel should be acquainted with hazards incurred.

You might also like