1.

 Relief Sculpture
Reliefs are one of the oldest forms of sculpting that date back as far as 25,000 years
ago in the caves of eastern Europe and other parts of the world.

The measure to which these sculptures differ in depth is what separates the different
kinds of relief sculpture. Reliefs can be as simple as a slight etching into the stone,
wood, or other material background or as detailed as most of the three dimensional
works that have been done throughout history.

– High Relief

High relief sculptures offer us a much more three dimensional work than any other
form of relief. These works are typically carved and chiseled very deep into the
material and can sometimes stand out with more than 50 percent of the work being
‘in the round.’

High relief works were very common thousands of years ago and were a favorite
technique that ancient cultures used to adorn various temples and other prestigious
structures.
– Low Relief

The most common type of relief sculpting is known as low relief. As the name
denotes, low relief works offer a very low degree of depth that the artist used in
creating the sculpture itself.

Also Read: Low Relief vs High Relief

This type of sculpture can be done on virtually any type of surface and is much easier
than high relief as there is a much lower potential that the artist might damage the
sculpture.

Virtually every culture on Earth has, at some point or another, used low relief
sculpture to capture certain aspects of their society and beliefs.

– Bas Relief

A bas-relief sculpture is virtually the same as a low relief work, but derives its name
from the Italian word ‘basso’ or the French ‘bas’ which means ‘low.’ These words are
sometimes used interchangeably and the Italian term ‘basso rilievo’ is considered to
be a much older terminology used to describe these sculptures.

Bas-relief was a favorite method of sculpting for the ancient Assyrian and Egyptian
cultures who carved their hieroglyphic language and history into stone tablets.

– Sunken Relief

Sunken relief is considered to be an ancient technique used by Egyptians and other,

more primitive cultures who recorded much of their history on stone or wooden
tablets.

Unlike low relief sculptures, sunken relief works are done on a background that is
mostly flat with the carving being done to indicate linear edges and outlines.

It’s known as a ‘sunken’ relief simply because the scene and the figures themselves
are at the same level as the flat surface of the background. The central figures in
these sculptures do not protrude out from the main surface in the same way low and
high relief sculptures do.

– Counter relief

Counter relief sculptures are, as their name indicates, the exact opposite of low and
high relief works. Instead of the figures and shapes being carved to protrude in an
outward fashion, they are carved deeper into the work to indicate various ranges of
depth.
This type of sculpting is a more modern version used in what many describe as an
abstract method of sculpture and was not commonly used by ancient artists. Counter
relief sculpture is basically a form of engraving that involves carving into a
background surface instead of chiseling the background away from the work’s central
figures.

2. Sculpture in the Round

The term ‘sculpture in the round’ simply refers to a three dimensional work. These
types of sculptures are sometimes made to be viewed from one or two angles, but
offer a fully ‘round’ viewpoint advantage to the observer in which they can enjoy the
full sculpture in all its grandeur.

Sculptures that are ‘in the round’ are often made to be viewed against a wall or
certain type of background while others might be free-standing sculptures that can
be observed from a 360-degree perspective.

3. Carved Sculptures
Carved sculptures date back as far into antiquity as any other form of artistic
expression. Ancient cultures used carving as a means to depict certain types of
animals or natural elements, as well as various religious figures that might have been
used for ceremonial purposes.

Also Read: Sculpture vs Statue

Carved sculptures have been done on a wide variety of different materials that
include wood, ivory, and other types of mediums. Artists that create carvings must
take a chunk of their material and carefully work to remove certain portions in order
to produce the desired figure.

4. Cast Sculptures
Casting is often used more often in modern sculpting, but it has its roots in ancient
forms of artwork that involved the use of clay or even different types of metals like
bronze.

Making a cast sculpture requires the artist to spend a considerable amount of time
creating a mold that would then be used as a form which was covered with the cast
materials.

Sculptures cast in bronze were a favorite for ancient Greek and Roman cultures as it
allowed them to create a more durable, lasting product than natural stone, which was
prone to cracking and breaking.

Also Read: Famous Greek Statues and Sculptures

These types of materials usually included liquid metal many centuries ago, but now
are done with a litany of different kinds such as plastic, fiberglass, rubber and many
others.

5. Additive Sculpture
Additive sculpture is vastly different from any other type of sculpting that we’ve
mentioned so far. Instead of taking a certain type of medium and removing certain
portions of that material, additive sculpture requires the artist to create a form by
adding certain material to the work itself.

Additive sculpture is much more common in modern times as artists have a wide
variety of different materials and techniques they can use to create certain forms and
structures. These materials are often fairly malleable and they allow the artist to
manipulate them into the desired shape.

6. Subtraction Sculpture
Subtractive sculpture is very similar to carved sculptures or works that are done in the
round. This method requires the artist to use a single piece of medium to carve their
sculpture out of until the desired outcome is reached.

It’s common for artists to have taken a chunk of stone or other material and worked
to remove various parts or add more definition to already existing shapes. In most
cases, artists who create subtraction sculptures will take a piece of material that has a
shape which is consistent with what they want to produce.

7. Assembled Sculptures
Assembled sculptures are much more common in the modern era than they have
been in times past. In recent decades, it has become quite popular for artists to
create assembled sculptures using virtually any type of material they want to produce
a specific outcome.

This assembled sculpture method is very common for artists who want to create
abstract works as it allows them to utilize certain elements and material that might
have a significant meaning to the overall work itself.

Many artists in the last century preferred to use certain types of metal which they
weld and fit together to create a range of different types of artwork.

8. Modeled Sculptures
Modeled sculpture is very similar to the casting technique we have already
mentioned, but it involves the use of any type of material the artist chooses.
Modeling works might involve the use of wax, clay or other types of medium which
the artist can easily mold and shape to their own desire.

In most modeled sculptures, an artist creates the work using his or her hands, but
modern techniques now sometimes involve the use of various tools and even
machinery. Modeling sculptures are one of the oldest types of artwork and have been
used in many types of ancient cultures for artistic or religious purposes.
9. Installation Sculptures
Installation sculpting involves fitting a number of different pre-formed pieces
together to create the final work. These are three dimensional sculptures that are
often made of any type of material the artist chooses, including wood, metal,
ceramics and other items. Installation art is often a work which envelopes an entire
space, such as a museum floor or room.

Also Read: Fountains in Rome

The many different individual pieces are fixed in place using various methods to
create a final work. Modern sculptors have used the installation method in a very
creative manner by hanging certain pieces of the sculpture from a ceiling or fixing
them in place through other methods.

In some cases, talented artists have been able to create installation sculptures that
produce multiple figures and images depending on the angle at which the viewer is
looking at the work itself.

10. Kinetic Sculptures
Kinetic sculpture is that which involves the use of certain shapes, contours, lines and
light effects to create actual or perceived movement in the work itself, or the
immediate surroundings.

Kinetic artwork is a much more modern technique than most of the others that we’ve
mentioned here and is quite common in the 21st century.

Certain kinetic sculptures today might involve the use of virtual movement which the
viewer perceives on a screen or with other methods. Many of the most popular types
of kinetic sculptures that are displayed today are moved using mechanical devices or
by the wind in some cases.

11. Earthwork Sculptures
Also known as land art, earthwork sculptures are works that are done in the ground
or using various types of naturally-occurring rocks or wood.

Earthwork sculptures actually date back thousands of years as certain cultures in

Northern Europe and South America have used this method to create giant
m1. Relief Sculpture
Reliefs are one of the oldest forms of sculpting that date back as far as 25,000 years
ago in the caves of eastern Europe and other parts of the world.
The measure to which these sculptures differ in depth is what separates the different
kinds of relief sculpture. Reliefs can be as simple as a slight etching into the stone,
wood, or other material background or as detailed as most of the three dimensional
works that have been done throughout history.

– High Relief

High relief sculptures offer us a much more three dimensional work than any other
form of relief. These works are typically carved and chiseled very deep into the
material and can sometimes stand out with more than 50 percent of the work being
‘in the round.’

High relief works were very common thousands of years ago and were a favorite
technique that ancient cultures used to adorn various temples and other prestigious
structures.

– Low Relief

The most common type of relief sculpting is known as low relief. As the name
denotes, low relief works offer a very low degree of depth that the artist used in
creating the sculpture itself.
Also Read: Low Relief vs High Relief

This type of sculpture can be done on virtually any type of surface and is much easier
than high relief as there is a much lower potential that the artist might damage the
sculpture.

Virtually every culture on Earth has, at some point or another, used low relief
sculpture to capture certain aspects of their society and beliefs.

– Bas Relief

A bas-relief sculpture is virtually the same as a low relief work, but derives its name
from the Italian word ‘basso’ or the French ‘bas’ which means ‘low.’ These words are
sometimes used interchangeably and the Italian term ‘basso rilievo’ is considered to
be a much older terminology used to describe these sculptures.

Bas-relief was a favorite method of sculpting for the ancient Assyrian and Egyptian
cultures who carved their hieroglyphic language and history into stone tablets.

– Sunken Relief

Sunken relief is considered to be an ancient technique used by Egyptians and other,

more primitive cultures who recorded much of their history on stone or wooden
tablets.

Unlike low relief sculptures, sunken relief works are done on a background that is
mostly flat with the carving being done to indicate linear edges and outlines.

It’s known as a ‘sunken’ relief simply because the scene and the figures themselves
are at the same level as the flat surface of the background. The central figures in
these sculptures do not protrude out from the main surface in the same way low and
high relief sculptures do.

– Counter relief

Counter relief sculptures are, as their name indicates, the exact opposite of low and
high relief works. Instead of the figures and shapes being carved to protrude in an
outward fashion, they are carved deeper into the work to indicate various ranges of
depth.

This type of sculpting is a more modern version used in what many describe as an
abstract method of sculpture and was not commonly used by ancient artists. Counter
relief sculpture is basically a form of engraving that involves carving into a
background surface instead of chiseling the background away from the work’s central
figures.
2. Sculpture in the Round
The term ‘sculpture in the round’ simply refers to a three dimensional work. These
types of sculptures are sometimes made to be viewed from one or two angles, but
offer a fully ‘round’ viewpoint advantage to the observer in which they can enjoy the
full sculpture in all its grandeur.

Sculptures that are ‘in the round’ are often made to be viewed against a wall or
certain type of background while others might be free-standing sculptures that can
be observed from a 360-degree perspective.

3. Carved Sculptures
Carved sculptures date back as far into antiquity as any other form of artistic
expression. Ancient cultures used carving as a means to depict certain types of
animals or natural elements, as well as various religious figures that might have been
used for ceremonial purposes.

Also Read: Sculpture vs Statue

Carved sculptures have been done on a wide variety of different materials that
include wood, ivory, and other types of mediums. Artists that create carvings must
take a chunk of their material and carefully work to remove certain portions in order
to produce the desired figure.

4. Cast Sculptures
Casting is often used more often in modern sculpting, but it has its roots in ancient
forms of artwork that involved the use of clay or even different types of metals like
bronze.

Making a cast sculpture requires the artist to spend a considerable amount of time
creating a mold that would then be used as a form which was covered with the cast
materials.

Sculptures cast in bronze were a favorite for ancient Greek and Roman cultures as it
allowed them to create a more durable, lasting product than natural stone, which was
prone to cracking and breaking.

Also Read: Famous Greek Statues and Sculptures

These types of materials usually included liquid metal many centuries ago, but now
are done with a litany of different kinds such as plastic, fiberglass, rubber and many
others.

5. Additive Sculpture
Additive sculpture is vastly different from any other type of sculpting that we’ve
mentioned so far. Instead of taking a certain type of medium and removing certain
portions of that material, additive sculpture requires the artist to create a form by
adding certain material to the work itself.

Additive sculpture is much more common in modern times as artists have a wide
variety of different materials and techniques they can use to create certain forms and
structures. These materials are often fairly malleable and they allow the artist to
manipulate them into the desired shape.

6. Subtraction Sculpture
Subtractive sculpture is very similar to carved sculptures or works that are done in the
round. This method requires the artist to use a single piece of medium to carve their
sculpture out of until the desired outcome is reached.

It’s common for artists to have taken a chunk of stone or other material and worked
to remove various parts or add more definition to already existing shapes. In most
cases, artists who create subtraction sculptures will take a piece of material that has a
shape which is consistent with what they want to produce.

7. Assembled Sculptures
Assembled sculptures are much more common in the modern era than they have
been in times past. In recent decades, it has become quite popular for artists to
create assembled sculptures using virtually any type of material they want to produce
a specific outcome.

This assembled sculpture method is very common for artists who want to create
abstract works as it allows them to utilize certain elements and material that might
have a significant meaning to the overall work itself.

Many artists in the last century preferred to use certain types of metal which they
weld and fit together to create a range of different types of artwork.

8. Modeled Sculptures
Modeled sculpture is very similar to the casting technique we have already
mentioned, but it involves the use of any type of material the artist chooses.
Modeling works might involve the use of wax, clay or other types of medium which
the artist can easily mold and shape to their own desire.

In most modeled sculptures, an artist creates the work using his or her hands, but
modern techniques now sometimes involve the use of various tools and even
machinery. Modeling sculptures are one of the oldest types of artwork and have been
used in many types of ancient cultures for artistic or religious purposes.
9. Installation Sculptures
Installation sculpting involves fitting a number of different pre-formed pieces
together to create the final work. These are three dimensional sculptures that are
often made of any type of material the artist chooses, including wood, metal,
ceramics and other items. Installation art is often a work which envelopes an entire
space, such as a museum floor or room.

Also Read: Fountains in Rome

The many different individual pieces are fixed in place using various methods to
create a final work. Modern sculptors have used the installation method in a very
creative manner by hanging certain pieces of the sculpture from a ceiling or fixing
them in place through other methods.

In some cases, talented artists have been able to create installation sculptures that
produce multiple figures and images depending on the angle at which the viewer is
looking at the work itself.

10. Kinetic Sculptures
Kinetic sculpture is that which involves the use of certain shapes, contours, lines and
light effects to create actual or perceived movement in the work itself, or the
immediate surroundings.

Kinetic artwork is a much more modern technique than most of the others that we’ve
mentioned here and is quite common in the 21st century.

Certain kinetic sculptures today might involve the use of virtual movement which the
viewer perceives on a screen or with other methods. Many of the most popular types
of kinetic sculptures that are displayed today are moved using mechanical devices or
by the wind in some cases.

11. Earthwork Sculptures
Also known as land art, earthwork sculptures are works that are done in the ground
or using various types of naturally-occurring rocks or wood.

Earthwork sculptures actually date back thousands of years as certain cultures in

Northern Europe and South America have used this method to create giant
monoliths that can be seen from an aerial viewpoint.

Older earthwork sculptures often involved creating works that held a likeness to
certain animals or humans while others revolved around distinct shapes and patterns.
Many Native American cultures, and others throughout the world, used rocks or
mounds of dirt and clay to create massive structures that held a special spiritual
meaning in most cases. Modern artists are using earthwork sculptures to create
massive structures that celebrate the Earth’s natural beauty.
onoliths that can be seen from an aerial viewpoint.

Older earthwork sculptures often involved creating works that held a likeness to
certain animals or humans while others revolved around distinct shapes and patterns.

Many Native American cultures, and others throughout the world, used rocks or
mounds of dirt and clay to create massive structures that held a special spiritual
meaning in most cases. Modern artists are using earthwork sculptures to create
massive structures that celebrate the Earth’s natural beauty.