EC8691 MICROPROCESSORS AND MICROCONTROLLERS LTPC
3003
OBJECTIVES:
To understand the Architecture of 8086 microprocessor.
To learn the design aspects of I/O and Memory Interfacing circuits.
To interface microprocessors with supporting chips.
To study the Architecture of 8051 microcontroller.
To design a microcontroller based system
UNIT I THE 8086 MICROPROCESSOR 9
Introduction to 8086 – Microprocessor architecture – Addressing modes - Instruction set and assembler
directives – Assembly language programming – Modular Programming - Linking and Relocation - Stacks -
Procedures – Macros – Interrupts and interrupt service routines – Byte and String Manipulation.
UNIT II 8086 SYSTEM BUS STRUCTURE 9
8086 signals – Basic configurations – System bus timing –System design using 8086 – I/O programming –
Introduction to Multiprogramming – System Bus Structure – Multiprocessor configurations – Coprocessor,
Closely coupled and loosely Coupled configurations – Introduction to advanced processors.
UNIT III I/O INTERFACING 9
Memory Interfacing and I/O interfacing - Parallel communication interface – Serial communication interface
– D/A and A/D Interface - Timer – Keyboard /display controller – Interrupt controller – DMA controller –
Programming and applications Case studies: Traffic Light control, LED display , LCD display, Keyboard
display interface and Alarm Controller.
UNIT IV MICROCONTROLLER 9
Architecture of 8051 – Special Function Registers(SFRs) - I/O Pins Ports and Circuits – Instruction set -
Addressing modes - Assembly language programming.
UNIT V INTERFACING MICROCONTROLLER 9
Programming 8051 Timers - Serial Port Programming - Interrupts Programming – LCD & Keyboard
Interfacing - ADC, DAC & Sensor Interfacing - External Memory Interface- Stepper Motor and Waveform
generation - Comparison of Microprocessor, Microcontroller, PIC and ARM processors
TOTAL: 45 PERIODS
OUTCOMES:
At the end of the course, the students should be able to:
Understand and execute programs based on 8086 microprocessor.
Design Memory Interfacing circuits.
Design and interface I/O circuits.
Design and implement 8051 microcontroller based systems.
TEXT BOOKS:
1. Yu-Cheng Liu, Glenn A.Gibson, “Microcomputer Systems: The 8086 / 8088 Family - Architecture,
Programming and Design”, Second Edition, Prentice Hall of India, 2007.
(UNIT I- III)
2. Mohamed Ali Mazidi, Janice Gillispie Mazidi, Rolin McKinlay, “The 8051 Microcontroller and Embedded
Systems: Using Assembly and C”, Second Edition, Pearson education, 2011.
(UNIT IV-V)
REFERENCES:
1. Doughlas V.Hall, “Microprocessors and Interfacing, Programming and Hardware”,TMH,2012
2. A.K.Ray,K.M.Bhurchandi,”Advanced Microprocessors and Peripherals “3rd edition, Tata
McGrawHill,2012