Project Registration Form (Aug. 2022 – Dec. 2022) Date……………..

Project Title: - FLOATING SUN TRACKER HYDRAULIC SOLAR PANEL

Project Objective: -

1.Solar Trackers are used to keep solar collectors/solar panels oriented directly towards the
sun as it moves through the sky every day.

2. Using Solar Trackers increases the amount of solar energy which is received by the solar
energy collector and improves the energy output of the heat/electricity which is generated.

Social Relevance: -
1. Community-based solar initiatives can have positive social impacts, from decreased
heating bills for low-income individuals

2. Decreased dependency on public utilities, an improved environment from reduced

pollution, and job creation.

S.No STUDENT’S Uid No. Semes Batch Mobil Email. Id Project

NAME ter and e No. Supervisor
class and his
mobile
number

1 DSSR 21BME8037 5TH 20BME 91823 Venkatdeevi MUNISH

VENKAT -2_A 42977 2001@gmail KUMAR and
.com 9882185486

2 MOHIT KR 21BME8022 5TH 20BME 62993 Am.019.18.

SINGH -2_A 27782 mohit@gmai
l.com

1
 3 RAHUL KR 21BME8035 5TH 20BME 70500 Rahulkumar
GUPTA -2_A 74124 gupta9898@
gmail.com

4 K VENU 21BME8044 5TH 20BME 83097 Venumadhav

MADHAV -2_A 68777 k2001@gma
il.com

5 DINESH 21BME8049 5TH 20BME 89689 Dhimandines

-2_A 11582 h1234@gma
il.com

Table 1.1

Student Project Leader Project Supervisor/ Employee ID

D S S R VENKAT MUNISH KUMAR / E5079

PROJECT SCOPE: -
Solar power is the future of renewable power generation. The problem with solar panels is that
they use up a lot of space on rooftops or open areas and are difficult to mount, maintain and
clean regularly. Additionally, the solar panels is moved as per sun position can generate upto
40% more solar power.

PLANNING & TASK DEFINITION: -

The system makes use of a solar sensing circuitry with a micro hydraulic power system. The
circuitry senses the voltage and power efficiency at particular position. The hydraulic motor
is then used to drive the fluid movement from one cylinder to another. As the liquid level
moves between 2 cylinders, the pistons linked to each cylinder varies in height resulting in a
change in the solar panel rotation.

This allows for increased efficiency of solar panel while at the same time incurring a very
negligible power usage required to adjust solar panel movement. Also it helps environment
and save water by minimizing evaporation.

MATERIAL REQUIRED:-
• Solar Panel
• Support Rods
• Mini Hydraulic Pump
2
 • Piping arrangement
• Controller Circuitry
• Water Floats
• Shaft Rod
• Base Frame
• Supporting Frame
• Mounts and Joints
• Screws and Bolts

PERSONAL TASKS / RESPONSIBILITIES: -

S. STUDENT’S Uid No. Semester Batch and Student Role in Project In

No NAME class project charge and
his mobile
number

1 DSSR 21BME8037 5TH 20BME-2_A DESIGN AND DR. AJAY

VENKAT LITERATURE KUMAR
REVIEW
DR. MOHIT
2 MOHIT KR 21BME8022 5TH 20BME-2_A FABRICATION KUMAR
SINGH

3 RAHUL KR 21BME8035 5TH 20BME-2_A FABRICATION

GUPTA

4 K VENU 21BME8044 5TH 20BME-2_A FABRICATION

MADHAV

5 DINESH 21BME8049 5TH 20BME-2_A SYNOPSIS AND

LITERATURE
REVIEW ( 2D
DESIGN )

Table 1.2

3
LITERATURE REVIEW & PROBLEM IDENTIFICATION
The task is to plan a functioning sun based global positioning framework which ready to follow
the daylight with the guide of light ward resistor (I-DR) as information sensor to peruse the
force of daylight. The sun powered global positioning framework utilizes stage as a base and
it is moved by a DC motor as the stage should be moved towards the daylight to get the ideal
light. The sun based global positioning framework is modified by utilizing microcontroller.
Arduino UNO as a fundamental regulator. After the arrangement of the equipment and
program, the following movement of the global positioning framework has been carried out to
follow the sun dependent on daylight course. In this work, it is planned that the movement of
the global positioning framework is relies upon the worth perused by LDR. As an end, the sun
based global positioning framework can build the sun-based boards proficiency by keeping
the sunlight-based boards opposite with sun's position. This system will act on a Floating
system in order to reduce the consumption of land.

Throughout the long term the exercises of the sun-based energy have being advantageous
humankind. It is obvious that the sunoriented energy is the most plentiful wellspring of energy
on the planet: despite the fact that it isn't the finished solution to the present energy emergency
Sun powered energy, brilliant light and warmth from the sun have promptly been outfit by
people since directly from the hour of old utilizing a scope of developing advances. The
expense of sun-oriented boards has been continually diminishing which energizes its
utilization in different areas. Subsequently sun-based force is the fate of inexhaustible force
age. The issue with sun powered boards is that they go through a great deal of room on
housetops or open regions and are hard to mount, keep up and clean routinely. Moreover, the
sun-oriented boards are moved according to sun position can create up to 40% more sun-based
force. We thus propose another sort of sun-based boards that can be mounted on water bodies
like lake pools so they don't consume any land space Additionally, we present a creative sun
tracker and board development framework utilizing Arduino UNO microcontroller and LDR
to move the sunlight-based boards according to sun position and produce more force.

OBJECTIVE:-
1. Using Solar Trackers increases the amount of solar energy which is received by the
solar energy collector and improves the energy output of the heat/electricity which is
generated.

Student Project Leader Project Supervisor/ Employee ID

D S S R VENKAT MUNISH KUMAR / E5079

4