Radial Tape

EH CONNECTOR
2.5mm pitch/Disconnectable Crimp style connectors

H JST
Specifications –––––––––––––––––––
2 • Current rating: 3A AC, DC (AWG #22)
3
4 • Voltage rating: 250V AC, DC
5
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #22
• Applicable PC board thickness: 0.8 to 1.6mm
This, the thinnest, 2.5mm pitch connector, * RoHS compliant products are published.
is 8.1mm in height after mounting and * Refer to "General Instruction and Notice when using
3.8mm in width. It is designed to meet the Terminals and Connectors" at the end of this catalog.
demand for the high-density connection of * Contact JST for details.
internal wires to printed circuit boards. It
is compact, highly reliable and low in cost. Standards ––––––––––––––––––––––
• Compact and slim 0 Recognized E60389
• Highly reliable contact 1 Certified LR20812
• Polarizing guides
• Easy and effective crimping 2 R50082349
PC board layout (viewed from soldering side) and Assembly layout
Top entry type Side entry type Radial-tape
±0.05
2.5 2.5 min 3.8
2.5 ±0.05 2.5 min 10.3 2.5 ±0.05 2.5 min 4.4
6.7 min
2.2 min

2.2 min
4.2
8.1

8.6
6.5
φ0.9 ＋0.1
 0
φ0.9 ＋0.1
 0 φ0.9 ＋0.1
0

Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.

2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.

Contact
Applicable wire Insulation O.D. Q'ty /
Model No.
mm2 AWG# (mm) reel
SEH-001T-P0.6 0.05 ∼ 0.33 30∼22 1.0∼1.9
*SEH-001T-P0.6L 0.13 ∼ 0.33 26∼22 0.9∼1.9 9,000
5.7
*SEH-002T-P0.6L 0.05 ∼ 0.13 30∼26 0.9∼1.3
2.85 2.05 1.1
*SEH-003T-P0.6L 0.032∼0.08 32∼28 0.5∼1.1 10,000

Material and Finish

2.0

Phosphor bronze, tin-plated (reflow treatment)

1.6 RoHS compliance

Note: 1. Contact JST for gold-plated products.
2. SEH-00( )T-P0.6L is low-insertion force type contact, for easier
insertion/withdrawal, which would be less resistant to the vibration.
The crimp height is different from the standard contact.
3. *Marked products are not TÜV approved.
4. Contact JST for details.

Crimping Applicator Crimping Applicator

Contact Contact
machine Crimp applicator Dies Crimp applicator with dies machine Crimp applicator Dies Crimp applicator with dies
MKS-LS・MKS-L MK/SEH-001-06 APLMK SEH001-06 MKS-LS・MKS-L MK/SEH-002-06L APLMK SEH002-06L
SEH-001T-P0.6 SEH-002T-P0.6L
*MKS-SC SC/SEH-001-06 APLSC SEH001-06 − − −
AP-K2N AP-K2N
MKS-LS・MKS-L MK/SEH-001-06L APLMK SEH001-06L MKS-L-10 MK/SEH-003-06L APLMK SEH003-06L
SEH-001T-P0.6L SEH-003T-P0.6L
*MKS-SC SC/SEH-001-06L APLSC SEH001-06L *MKS-SC-10 SC/SEH-003-06L APLSC SEH003-06L
Note: *Strip-crimp applicator

35
EH CONNECTOR

Housing
Cir- Dimensions (mm) Q'ty /
Model No.
cuits A B bag
2 EHR-2 2.5 7.0 1,000
3 EHR-3 5.0 9.5 1,000
B
4 EHR-4 7.5 12.0 1,000
A
5 EHR-5 10.0 14.5 1,000
（2.25）（2.5） 3.8
6 EHR-6 12.5 17.0 1,000
0.6 7 EHR-7 15.0 19.5 1,000
8 EHR-8 17.5 22.0 1,000
2 3 6 7
H JST

9 EHR-9 20.0 24.5 1,000

10 EHR-10 22.5 27.0 1,000
6.5

11 EHR-11 25.0 29.5 1,000

12 EHR-12 27.5 32.0 1,000
0.7 13 EHR-13 30.0 34.5 1,000
Circuit No.1 14 EHR-14 32.5 37.0 1,000
15 EHR-15 35.0 39.5 1,000

Material
PA 66, UL94V-0, natural (white)

RoHS compliance
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. EHR-2-oo-
(blank)…natural (white)
K…black R…red TR…tomato red E…blue Y…yellow
L…lemon yellow M…green O…orange N…brown PL…purple
PK…pink H…gray LE…light blue FY…vivid yellow

Shrouded header
The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors.

Model No. Dimensions (mm) Q'ty / box

Top entry type Cir-cuits Top entry Side entry Top entry Side entry
type type A B type type
(2 circuits) B 3.8
2 B2B-EH-A S2B-EH 2.5 7.5 1,000 1,000
3 B3B-EH-A S3B-EH 5.0 10.0 1,000 1,000
3.3
6.0

4 B4B-EH-A S4B-EH 7.5 12.5 1,000 1,000

5 B5B-EH-A S5B-EH 10.0 15.0 1,000 1,000
6 B6B-EH-A S6B-EH 12.5 17.5 1,000 500
3.2

7 B7B-EH-A S7B-EH 15.0 20.0 1,000 500

0.64
8 B8B-EH-A S8B-EH 17.5 22.5 500 500
（2.5） A （1.6）
9 B9B-EH-A S9B-EH 20.0 25.0 500 500
Circuit No.1
10 B10B-EH-A S10B-EH 22.5 27.5 500 500
11 B11B-EH-A S11B-EH 25.0 30.0 500 250
(3 to 15 circuits)
3.8 12 B12B-EH-A S12B-EH 27.5 32.5 500 250
13 B13B-EH-A S13B-EH 30.0 35.0 250 250
14 B14B-EH-A S14B-EH 32.5 37.5 250 250
3.3
6.0

15 B15B-EH-A S15B-EH 35.0 40.0 250 250

5.1

Material and Finish

Post: Brass, copper-undercoated, tin-plated (reflow treatment)
3.2

Wafer: PA 66, UL94V-0, natural (white)

2.5 0.64
（1.6） RoHS compliance This product displays (LF)(SN) on a label.
（2.5） A
B Note: Also available and identified as model BxxB-EH is a top entry type having
a post extension length of 4.0mm
Circuit No.1
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
Side entry type For availability, delivery and minimum order quantity, contact JST.
4.2 <Top entry type>
ex. B2B-EH-A-oo-
4.0

(blank)…natural (white)
6.0

6.7
5.2

K…black R…red E…blue Y…yellow M…green

<Side entry type>
2.2

2.5 0.64 ex. S2B-EH-oo-

（2.5） A 3.2 (blank)…natural (white)
B
K…black R…red TR…tomato red E…blue Y…yellow
Circuit No.1
L…lemon yellow M…green O…orange N…brown P…purple
PK…pink H…gray LE…light blue FY…vivid yellow

36
 EH CONNECTOR

Shrouded header on radial-tape

Cir- Model No. Dimensions (mm) Q'ty /
●TS type
cuits TS type TV4 type A B box
2 B2B-EH-TS − − − 1,400
(2 circuits) (3 to 8 circuits) 3 B3B-EH-TS B3B-EH-TV4 5.0 10.0 1,400
4 B4B-EH-TS B4B-EH-TV4 7.5 12.5 700
5 B5B-EH-TS B5B-EH-TV4 10.0 15.0 700
B 6 B6B-EH-TS B6B-EH-TV4 12.5 17.5 700
7.5 4.4
2.5
A 2.5 4.4 7 B7B-EH-TS B7B-EH-TV4 15.0 20.0 700
2.2
2.5 φ0.64 2.2 8 B8B-EH-TS B8B-EH-TV4 17.5 22.5 700

6.5
6.5

5.4

Material and Finish

5.6
1.5 Pin/Post: Brass, copper-undercoated, tin-plated (reflow treatment)
（1.0）

φ0.64
1.5

Wafer: PA 66, UL94V-0, natural (white)

（1.0）

2.8 φ0.64

RoHS compliance This product displays (LF)(SN) on a label.

<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-EH-TS-oo-
(blank)…natural (white)
K…black R…red E…blue Y…yellow M…green N…brown

●TV4 type
Taping specifications
2 and 3 circuits: 12.7
B 4 to 8 circuits: 25.4
A 2.5 4.4
2.5 0.64 2.2
6.5

5.6

（φ0.7）
20.0
2.8

（φ0.7）

6.0
9.0

18.0
φ4.0

2 circuits: 5.1 2 circuits: 2.5

3 to 8 circuits: 3.85 3 to 8 circuits: 5.0
12.7

Note: Conforms to JIS C 0806.

37
EH CONNECTOR
Packaging specifications –––––––––––––––––––––––––––––––––––––––––––––––––––
D
Distance between the end of the tape and the first connector's center
line (either end)

TERMIN
ALS &
CONN
Tail tape Leader tape
H ECTORS

Package type Flat pack (zigzag folded)

Distance between folds 24 indexing holes per fold (304.8mm)
Box size 316(W)×45(D)×330(H)mm

Distance between the end of the

tape and the first connector´s 19.05mm
center line (either end)

Note: Products of different packaging specifications are also available.

Contact JST for details.