CURRICULUM VITAE
Vishal Yashwant Bhise
Address:
Center for Advanced Machining Technology Lab,
Department of Mechanical Engineering,
Dr. Babasaheb Ambedkar Technological University,
Lonere, Tal. Mangaon, Dist. Raigad,
Maharashtra, Pin 410210.
Mobile : +91 8898554582
E-Mail :
[email protected] To work to the best of my ability and face any challenges.
Objective
Seeking a practical learning exposure with an organization utilizing my innovative skill sets so
that I may aid the organization in its pursuit and also open avenues for self development and
growth.
Professional Qualification:
Pursuing Ph.D - Mechanical Engineering (Final Stage)
Dr. Babasaheb Ambedkar Technological University, Lonere.
(Awarded fellowship from UGC, Government of India)
Masters of Engineering – Mechanical with specialization in Manufacturing Engg.
University of Mumbai (2014).
Bachelors of Engineering – Mechanical
University of Mumbai (2010).
Diploma in Engineering – Automobile
Government Polytechnic, Washim, M.S.B.T.E, Mumbai (2006).
Short Term Courses
1. Two Days course on ‘Wastewater Management’ organised by DBATU Lonere,
Sponsored by TEQIP-III, during 17th-18th January 2020.
2. Five Days course on ‘Cyber Security’ by organised DBATU Lonere, sponsored by
AICTE ATAL Academy during 6th – 10th January 2020.
3. Five Days ISTE approved short term course on ‘Emerging Applications of Solidworks
in Engineering R&D’ organized by Mechanical Engineering Department, BVCOE, Navi
Mumbai during 17th – 21st April 2018.
4. One Week Short Term Couse on ‘Fundamentals and Applications of Fracture
Mechanics’ AICTE - QIP sponsored, organized by Department of Mechanical
Engineering, VJTI, Mumbai during 22nd -27th January 2018.
5. Two Days ISTE approved short term course on ‘Art to Part: Integrated Product Design
& Development’ organized by Mechanical Engineering Department, BVCOE, Navi
Mumbai during 21st - 22nd March 2017.
6. 45 Days Short Term Couse on ‘Advances in CAD’ organized by MSME, Govt. of India
at SCOE, Navi Mumbai during 14th March To 7th May 2016.
7. One Week Short Term Couse on ‘Advances in Manufacturing Technology and
Management’ QIP sponsored, organized by Production Engineering Department, VJTI
Mumbai during 22nd – 27th February 2016.
8. One Week ISTE approved short term course on ‘Recent Trends in Mechanical
Engineering’ organized by Mechanical Engineering Department, SCOE, Navi Mumbai
during 06th – 10th June 2016.
9. Three Days Course on ‘Entrepreneurship Awareness’, Sponsored by Department of
Science and Technology at Govt. Polytechnic, Washim during 12th - 14th Sep 2005
10. One Month course on ‘Battery Maintenance’, conducted by MHRD at Govt.
Polytechnic, Washim in August 2004.
Publications (SCOPUS Indexed)
1. Vishal Yashwant Bhise1, Bhagwan F.Jogi2, ‘Effect of Cutting Speed and Feed on Surface
Roughness in Dry Turning of Inconel X-750’ Materials Today Proceedings,
(Elsevier/Scopus) 2022. https://doi.org/10.1016/j.matpr.2022.04.098
2. Vishal Yashwant Bhise1, Bhagwan F.Jogi2, Recent developments on sustainable
lubricants by using vegetable oil based nanofluids in machining, Materials Today
Proceedings, (Elsevier/Scopus) 2022. https://doi.org/10.1016/j.matpr.2022.03.429
3. Vishal Yashwant Bhise1, Bhagwan F.Jogi2, ‘Effect of Cutting Speed and Feed on Cutting
Force, Energy Consumption and MRR during Dry Turning of Inconel X-750 (Accepted/
under process for publication in LNME (Springer Nature) (Scopus).
4. Vishal Bhise and B.F.Jogi, ‘Experimental Investigation and Theoretical Modelling of P20
Steel by using CNC End Milling Machining Process’, IOP- Journal of Physics.: 1854 (1),
012011 (2021) (Scopus). doi:10.1088/1742-6596/1854/1/012011
5. Sujay Kekare1, B. F. Jogi1, Vishal Bhise1, Anoop Nair2 ‘Aesthetic improvement of sheet
molding compound (SMC) composite plate by using natural fibre reinforced polymer
(NFRP) like jute fiber reinforced epoxy matrix’, IOP Conf. Series: Materials Science and
Engineering 810 (2020) 012002 (Scopus) doi:10.1088/1757-899X/810/1/012002
(Received Best Paper Award).
Patent
Title of Patent: High Speed Turning of Inconel X-750 Superalloy under Dry Environment
by using Optimized Process Parameters to achieve the Desired Surface Finish in Aerospace
Applications.
Status: Under Process
Thesis /Project
At Ph.D Level: Investigation on Machining Behavior of Inconel X-750 under Sustainable
Dry and MQL based Hybrid Nanofluid Environment.
At Master’s Level: Life Cycle Assessment of Cold Rolling Mill Roll: An Input Output
Cradle to Cradle Model (Performed At CMI FPE Ltd. Taloja).
At Bachelor’s Level: Process analysis of Hoist & Cranes (Performed At Hercules Hoists
Ltd, Khopoli).
At Diploma Level: Manufacturing of Truck Tyre Remover (Performed in house at
Government Polytechnic, Washim).
Software Skills
1. Solidworks 6. Origin
2. CATIA 7. GaBi (Sustainability Assessment
3. PRO-E Software)
4. AutoCAD 8. Microsoft Office
5. Minitab 9. Internet etc.
Research Experience
1. Dr. Babasaheb Ambedkar Technological University, Lonere.
(A State Technological University, Established by Government of Maharashtra)
Position:
i. Senior Research Fellow (07th November 2019 to till date)
ii. Junior Research Fellow (07th November 2017 to 06th November 2019)
Research Lab: Center for Advanced Machining Technology
Research Area: Machining of Superalloy Inconel X-750 under dry and hybrid
nanofluid MQL environment.
Research Supervisor: Professor Bhagwan F. Jogi
Academic Experience
1. Saraswati College of Engineering, Navi Mumbai.
(Affiliated to University of Mumbai)
Post held: Assistant Professor (Adhoc Basis)
Department: Mechanical Engineering
Period : 01st January 2016 To 31st October 2017
Role/Responsibility: Department R&D Coordinator, Conducting lectures, Practical,
internal and university exams, etc.
2. Lokmanya Tilak College of Engineering, Navi Mumbai.
(Affiliated to University of Mumbai).
Post held: Assistant Professor (Adhoc Basis)
Department: Mechanical Engineering
Period : 15th July 2014 To 31st December 2015
Role/Responsibility: Conducting lectures, Practical, internal and university exams,
Involvement in ERP etc.
Industry Experience
1. John Cockerill India Limited (Formerly CMI FPE Ltd)
Post held: Project Associate
Period: 01st July 2013 to 30th June 2014
Role/Responsibility: Research and Development on Sustainability Project.
2. Schrader Duncan Ltd, Navi Mumbai.
Post held: Engineer – Design and Development
Period : 01st December 2011 to 30th June 2013
Role/Responsibility: Preparation of drawings, bill of material, dealing with techno-
commercial inquiries, costing preparation, dealing with customer & sales engineer’s
queries, co-ordination & follow up with vendors, inspection with client/third party
inspector, preparation of standard work procedure for various products in plant,
involvement in the development of existing & new products.
3. United Van Der Horst Ltd, Taloja
Post held: Engineer - Quality Control
Period : 21st April 2011 To 22nd November 2011
Role/Responsibility: Quality inspection of heavy machineries and components,
preparation of inspection report, inspection with client/third party inspector etc.
Professional Membership
Lifetime Member of ‘Indian Institute of Industrial Engineers (IIIE)’.
Membership No.: MIIE 10638 (20)
Personal Details:
Date of Birth : 15/11/1985
Sex : Male
Nationality : Indian
Marital Status : Married
Hobbies : Listening Music, Reading, Driving, Swimming, Surfing etc.
Linguistic Abilities
To Speak : English, Hindi and Marathi
To Read & Write : English, Hindi and Marathi
To Write : English, Hindi and Marathi
Declaration
I hereby declare that the information furnished above is correct to the best of my knowledge.
Place: Lonere, Raigad.
Date: 02/09/2022
Yours Sincerely,
(Vishal Yashwant Bhise)
