4.session Plan (1 Unit of Comeptency)
4.session Plan (1 Unit of Comeptency)
Sector : Electronics
Qualification Title : Computer System Servicing
Unit of Competency : Set-up computer networks
Module Title : Setting-up computer networks
Learning Outcomes:
LO1: Install network cables
LO 2: Set network configuration
LO3: Set router/Wi-Fi/ wireless access point/repeater configuration
LO4: Inspect and test the configured computer networks
A. INTRODUCTION:
This unit covers the outcomes required in setting-up computers networks for LANs and small-office home-office (SOHO)
systems. It consists of competencies to install network cables, set network configuration, set router/Wi-Fi/ wireless
access point/repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES
LO 1: Install network cables
Learning Content Methods Presentation Practice Feedback Resources Time
Computer Network Modular (self- Read Information Answer Self Compare your
Testing and NIC paced) sheet Check #2.2-2 answers to the
Configuration #2.2-2 “Computer answer key #2.2-2 1 hour
CBLM
Network Testing
and NIC
Configuration”
Demonstration Read Task Sheet Perform Task Evaluate your
#2.2-2 “Network Sheet #2.2-2 performance
Diagnostic” according to ● CBLM 5 hours
Performance ● Computer
Criteria Checklist
#2.2-2
Check terminals with Modular (self- Read Information Answer Self Compare your
OS network paced) Sheet Check #2.2-3 answers to the
configuration guide #2.2-3 “Check Answer key #2.2-3
terminals with OS CBLM 1 hour
network
configuration
guide”
Configure Local Area Modular (self- Read Information Answer Self Compare your
Network (LAN) paced) sheet #2.3-2 Check #2.3-2 answers to the
Configure local Answer key #2.3-2 CBLM 1hr
area Network (LAN)
Demonstration read Task Sheet Perform Task Evaluate your ● Computer 1hr
#2.3-2 Configure Sheet #2.3-2 performance Server
Developed by:
Regional training Ce
Claire Anne Maguddayao Tuguegarao
Revision # 01