CÁC TIÊU CHUẨN QUỐC TẾ PHỔ

QUÁT CỦA NGÀNH IN

Accredited standards
 TECHNICAL STANDARDS

PRODUCT
CODE STANDARD DESCRIPTION
CGATS Standards
CGATS.4 – 2011 (R2016)
Graphic technology - Graphic arts reflection densitometry measurements - Terminology, equations, image
elements and procedures
1200112 This standard defines terms, equations and procedures for measurement, use, and communication of data obtained
using reflection densitometry in the graphic arts. It also applies to measurement of materials produced by systems such
as photographic, ink jet, thermal transfer, electrophotographic, and toner technology (including off-press proofs), etc.,
when used for graphic arts applications. 17 pp.
CGATS.5 - 2009 (identical national adoption of ISO 13655:2009)
Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
This standard establishes procedures for the measurements and colorimetrical computations appropriate to objects that
reflect, transmit, or self-illuminate, including flat-panel displays. It also establishes procedures for computation of
1200309 colorimetric parameters for graphic arts images. Graphic arts includes, but is not limited to, the preparation of material for,
and volume production by, production printing processes that include offset lithography, letterpress, flexography, gravure
and screen printing. This standard does not address spectral measurements appropriate to other specific application
needs, such as those used during the production of materials, e.g. printing ink, printing paper and proofing media. 37 pp.
CGATS.7 - 2003
Graphic technology - Pallet loading for printed materials
1200103 This standard specifies the stacking, unitizing, protection and labeling of palletized printed materials. It also specifies the
functional design of pallets used to transport printed materials, and gives specifications for their loading onto delivery
vehicles. 24 pp.
CGATS.9 - 2007
Graphic technology - Graphic arts transmission densitometry measurements - Terminology, equations, image
elements and procedures
1200107 This standard defines terminology, equations, process control elements and procedures for measurement and
communication of transmission densitometry data for graphic arts halftone images. Although this standard addresses
halftone applications, there are situations where non-traditional halftones and/or continuous tone materials are used for
which these computations are also appropriate.12 pp.
CGATS.17 - 2009 (identical national adoption of ISO 28178:2009)
Graphic technology - Exchange format for color and process control data using XML or ASCII text
This standard defines an exchange format for color and process control data (and the associated metadata necessary for
1200209 its proper interpretation) in electronic form using either XML or ASCII formatted data files. It maintains human readability
of the data as well as enabling machine readability. It includes a series of predefined tags and keywords, and provides
extensibility through provision for the dynamic definition of additional tags and keywords as necessary. It is focused
primarily on spectral measurement data, colorimetric data, and densitometric data. 36 pp.
CGATS.20 - 2002
Graphic technology - Variable printing data exchange using PPML and PDF (PPML/VDX)
This standard specifies the methods for the use of the Personalized Print Markup Language (PPML) and the Portable
Document Format (PDF) for the exchange or identification of all elements necessary to render a variable data imaging
1200122 job as intended by the sender. This standard specifies document layout and content data and makes provision for
product intent specifications using the Job Definition Format (e.g., paper selection, binding, finishing, etc.). This standard
is not intended to address applications where printing is started before the file creation and transfer is complete (often
called streaming applications). 40 pp.
CGATS 21-1-2013
Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles
This part of CGATS 21 establishes principles for the use of color characterization data as the definition of the intended
relationship between input data and printed color for copy preparation, job assembly, proofing, and graphic arts production
1200113
printing. Additional Parts of CGATS 21 specify a limited number of characterized reference printing conditions that span
the expected range of color gamuts used for the production of printed material from digital data, regardless of printing
process used. The procedure to be used to adjust color characterization data for the normally expected range of substrate
color Is specified. 17 pp.
CGATS 21-2-2013
Graphic technology — Printing from digital data across multiple technologies — Part 2: Characterized reference
printing conditions 2013
1200213 This part of CGATS specifies a limited number of characterized reference printing conditions that span the expected
range of color gamuts used for the production of printed material from digital data, regardless of printing process used.
This document comes as a zip file which includes CRPC data files. 17 pp.

1
PRODUCT
CODE STANDARD DESCRIPTION
CGATS 21-1 and CGATS 21-2
Graphic technology — Printing from digital data across multiple technologies
1200313 • Part 1: Principles
• Part 2: Characterized reference printing conditions 2013
Both parts of CGATS 21 are bundled together on CD for a reduced price.
CGATS TR 001 - 1995 + Supplement 1 (R2016)
Graphic technology - Color characterization data for Type 1 printing (Technical Report Only)
This report provides public access to, and a reference source for, colorimetric characterization data describing offset
lithographic printing meeting the requirements of ANSI/CGATS.6-1995, Graphic technology — Specifications for graphic
arts printing — Type 1. The input test data is as defined in ANSI/IT8.7/3-1993, Graphic technology —
Input data for characterization of 4-color process printing, and all measurements are in accordance with ANSI/CGATS.5-
1993, Graphic technology — Spectral measurement and colorimetric computation for graphic arts images. Because the
data contained in this report is based on the measurement of press sheets produced by practical printing, the data itself
cannot be normative. However, it provides the best estimate of the characterization of this class of printing, and as such
it is an important reference. It is expected that the use of this reference data will be a requirement of many printing
1200117 application programs.

NOTE 1: CGATS TR001 characterization data is based on the SWOP printing aims as they existed in 1993. While
these data are still valid, and are used to describe the CMYK to color relationship of many CMYK data files, for
newer work they have been superseded by CGATS TR003 and CGATS TR005. These newer data sets represent
SWOP proofing and printing on U.S. Grade 3 and Grade 5 coated publication paper respectively.

NOTE 2: TR001 contains colorimetric characterization data describing offset lithographic printing meeting the
requirements of the now withdrawn CGATS.6. It is now provided for historical traceability of standardized
publication printing. For values and guidance for current publication printing aims please refer to CGATS.21 series
or the ISO equivalent, ISO/PAS 15339.
CGATS TR 001 Data
Graphic technology - Digital Data for CGATS TR 001 - 1995 (R2003) (Data Only)
1201195 This disk contains the digital data, in ASCII format, in support of CGATS TR 001, including the colorimetric data shown in
Annex A of the Technical Report. It includes tabulations of the average spectral data for each of the measured patches.
Available as zipped file or on CD-ROM.
CGATS TR 001 – 1995 (R2016) (Bundle)
1200217
Set Includes the Technical Report TR 001 (including Supplement 1) and related data at a package price.
CGATS/SNAP TR 002-2007
Graphic technology – Color characterization data for coldset printing on newsprint
1200114 This Technical Report provides color characterization data for coldset printing on newsprint performed in accordance with
the SNAP Specifications.

CGATS/SWOP TR 003-2007
Graphic technology – Color characterization data for SWOP® proofing and printing on U.S. Grade 3 coated
publication paper
1200214 This Technical Report provides color characterization data for proofing and sheet or web offset printing of publication
input materials on U.S. Grade 3 coated publication paper performed in accordance with the SWOP Specifications.

CGATS/SWOP TR 005-2007
Graphic technology – Color characterization data for SWOP® proofing and printing on U.S. Grade 5 coated
publication paper
1200314 This Technical Report provides color characterization data for proofing and sheet or web offset printing of publication
input materials on U.S. Grade 5 coated publication paper performed in accordance with the SWOP Specifications.

CGATS/GRACoL TR 006-2007
Graphic technology – Color characterization data for GRACoL® proofing and printing on U.S. Grade 1 coated
paper
1200414 This Technical Report provides color characterization data for proofing and for sheet-fed printing on U.S. Grade 1 papers
containing significant amounts of optical brightening agents (OBA).

CGATS TR 011 – 2002

Graphic technology - Package development workflow - Design concept through approved production file
This Technical Report describes a model, or reference, workflow for the packaging development process from the
1200102 identification of a project through preparation of an approved production file. It defines the total set of information that
needs to be addressed in a workflow, yet allows for variations based on individual needs. Intended for use as a
reference in the creation of workflow procedures for specific organizations or products. 37 pp.

2
PRODUCT
CODE STANDARD DESCRIPTION
CGATS TR 012 – 2003
Graphic technology - Color reproduction and process control for packaging printing
This Technical Report outlines the steps necessary to understand and objectively define the color and tone reproduction
1200411 capabilities (and limitations) of a printing process. These steps include optimization, fingerprinting, process control, and
characterization, which provide the information required in the package development workflow defined in ANSI CGATS
TR 011. This report also suggests steps that may be taken to control the printing processes to achieve consistent and
predictable color. 28 pp.
CGATS TR 015 – 2013
Graphic technology – Methodology for Establishing Printing Aims Based on a Shared Near-neutral Gray-scale
This Technical Report defines a methodology for establishing individual printing tone reproduction and near-neutral gray-
1200514
scale aims, and families thereof, based on a shared near-neutral gray-scale definition. This methodology can be used to
establish such aims for any CMYK printing system regardless of the printing process used or gamut involved.

CGATS TR 016 – 2014

Graphic technology - Printing Tolerance and Conformity Assessment
This technical report defines a process that can be used in evaluating the conformance of printed material to a set of
1200614 reference color characterization data, which are used as the intended printing aim. It also provides a conformance
assessment procedure which includes evaluation of deviation, within-sheet variation, and production variation as well as a
four-level tolerance schema for the combination of the weighted results into a single rank.

CGATS/ISO 12639:2004 (identical national adoption of ISO 12639:2004)

Graphic technology - Prepress digital data exchange - Tag image file format for image technology (TIFF/IT)
This International Standard, which replaces ANSI IT8.8-1993, specifies a media-independent means for prepress electronic
1401204
data exchange. It defines image file formats for encoding colour continuous tone picture images, colour line art images,
high resolution continuous tone images, monochrome continuous tone images, binary picture images, binary line art images,
screened data, and images of composite final pages. 82 pp.
CGATS/ISO 12639:2004 / Amendment 1:2007 (identical national adoption of ISO 12639 Amd 1:2007)
1200507
This document amends CGATS/ISO 12639:2004. 6 pp.
CGATS/ISO 12640-1:2007 (identical national adoption of ISO 12640-1:1997)
Graphic technology - Prepress digital data exchange – Part 1: CMYK standard colour image data (CMYK/SCID)
This standard specifies the CMYK digital data that represents a set of standard colour images to be used for evaluation of
1200207
changes in image quality during coding, image processing (including transformation, compression and decompression),
film recording or printing which can be used for research, development, product evaluation and process control. Document
and images available on CD-ROM or as a zip file. (See companion document ISO/TR 14672)
CGATS/ISO 12640-2:2007 (identical national adoption of ISO 12640-2:2004)
Graphic technology – Prepress digital data exchange – Part 2: XYZ/sRGB encoded standard colour image data
(XYZ/SCID)
This standard specifies a set of 15 standard colour images (encoded as both 16-bit XYZ and 8-bit RGB digital data
1200307
provided in electronic data files) that can be used for the evaluation of changes in image quality during coding, image
processing (including transformation compression and decompression), displaying on a colour monitor or printing. They
can be used for many graphic technology applications such as research, development, product evaluation, and process
control. This package includes a 2008 corrigendum. Document and images available on 2 CD-ROMS or as a zip file.
CGATS/ISO 12640-3:2007
Graphic technology – Prepress digital data exchange – Part 3: CIELAB standard colour image data
(CIELAB/SCID).
This identical national adoption of ISO 12640-3:2007 specifies a set of standard large gamut colour images (encoded as
1200407
16-bit CIELAB digital data) that can be used for the evaluation of changes in image quality during coding, image
processing (including transformation, compression and decompression), displaying on a colour monitor and printing.
These images can be used for research, testing and assessing of output systems such as printers, colour management
systems and colour profiles.
CGATS/ISO 12642-1(IT8.7/3)
1200215 This identical national adoption of ISO 12642-1 defines an input data file, a measurement procedure and an output data
format for use in characterizing any four-colour printing process.
CGATS-ISO-12642-2(IT8.7/4)
This part of ISO 12642 defines a data set of ink value combinations that are intended to be used to characterize
4-colour process printing. This data set is not optimized for any printing process or application area but is robust
1200315 enough for all general applications. The needs of publication, commercial, and package printing with offset, gravure,
flexography, and other printing processes have been considered. While it is primarily aimed at process colour printing
with CMYK inks, it can also be used with any combination of three chromatic coloured inks and a dark ink. It is an
alternate to the ISO 12642-1 data set where more robust data is required.
CGATS/ISO 12646:2016 (identical national adoption of ISO 12646:2015)
Graphic technology — Displays for colour proofing — Characteristics
1200317 This International Standard specifies requirements for two conformance levels for the characteristics of displays to be
used for soft proofing of colour images. Included are requirements for uniformity and variations of electrooptical
properties with viewing direction for different driving signals.
CGATS/ISO 12646:2008 / Amendment 1:2010 (identical national adoption of ISO 12646:2008/Amd.1:2010
1200111
This document amends CGATS/ISO 12646:2008. 2 pp.
3
PRODUCT
CODE STANDARD DESCRIPTION
CGATS/ISO 15790:2005 (identical national adoption of ISO 15790:2004)
Graphic technology and photography – Certified reference materials for reflection and transmission metrology –
Documentation and procedures for use, including determination of combined uncertainty
1200405
This standard specifies the documentation requirements for certified reference materials (CRMs), procedures for the use
of CRMs, and procedures for the computation and reporting of the combined standard uncertainty of reflectance and
transmittance measurement systems used in graphic arts, photographic and other imaging industries. 25 pp.
CGATS/ISO 15930-1:2004 (identical national adoption of ISO 15930-1:2001)
Graphic technology - Prepress digital data exchange - Use of PDF - Part 1: Complete exchange using CMYK data
1401304 (PDF/X-1 and PDF/X-1a) (Supersedes CGATS.12/1 - 1999)
This part of 15930 specifies the methods for the use of the Portable Document Format (PDF) for the dissemination of
compound CMYK digital data, in a single exchange, that is complete and ready for final print reproduction. 16 pp.
CGATS/ISO 15930-3:2004 (identical national adoption of ISO 15930-3:2002)
Graphic technology - Prepress digital data exchange - Use of PDF - Part 3: Complete exchange suitable for
colour-managed workflows (PDF/X-3)
1401404
This part of ISO 15930 specifies the use of the Portable Document Format (PDF) for the dissemination of complete digital
data, in a single exchange, that contains all elements necessary for final print reproduction. These exchanges will support
both colour-managed workflows and traditional CMYK workflows. 17 pp.
CGATS/ISO 15930-4:2004 (identical national adoption of ISO 15930-4:2003)
Graphic technology – Prepress digital data exchange using PDF – Part 4: Complete exchange of CMYK and spot
colour printing data using PDF 1.4 (PDF/X-1a)
1401504
This part of ISO 15930 specifies the use of the Portable Document Format (PDF) Version 1.4 for the dissemination of
complete digital data, in a single exchange, that contains all elements ready for final print reproduction. CMYK and spot-
colour data are supported in any combination. 24 pp.
CGATS/ISO 15930-6:2004 (identical national adoption of ISO 15930-6:2003)
Graphic technology – Prepress digital data exchange using PDF – Part 6: Complete exchange of printing data
suitable for colour-managed workflows using PDF 1.4 (PDF/X-3)
1401704
This part of ISO 15930 specifies the use of the Portable Document Format (PDF) Version 1.4 for the dissemination of
complete digital data, in a single exchange, that contains all elements necessary for final print reproduction. Colour-
managed, CMYK, gray, RGB or spot colour data are supported. 24 pp.
CGATS/ISO 15930-7:2010 (identical national adoption of ISO 15930-7:2010)
Graphic technology – Prepress digital data exchange using PDF – Part 7: Complete exchange of printing data
(PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF 1.6
1200110 This part of CGATS/ISO 15930 specifies the use of the Portable Document Format (PDF) Version 1.6 for the dissemination
of digital data intended for print reproduction. Where all elements necessary for final print reproduction are contained within
the file it is designated as PDF/X-4. If a required ICC profile is externally supplied and unambiguously identified, it is
designated as PDF/X-4p. 35 pp.
CGATS/ISO 15930-8:2010 (identical national adoption of ISO 15930-8:2010)
Graphic technology – Prepress digital data exchange using PDF – Part 8: Partial exchange of printing data using
PDF 1.6 (PDF/X-5)
1200210 This part of CGATS/ISO 15930 specifies the use of the Portable Document Format (PDF) Version 1.6 for the dissemination
of digital data intended for print, whereby all elements necessary for final print reproduction are either included or
provision is made for unique identification of externally supplied graphical content or n-colorant ICC profiles. This package
includes a 2011 corrigendum and is available as a zip file. 23 pp.
CGATS/AIIM/ISO 19005-1:2005
Electronic document file format for long term preservation – Part 1: Use of PDF 1.4 (PDF/A-1)
This part of ANSI/CGATS/AIIM/ISO 19005 specifies how to use the Portable Document Format (PDF) 1.4 for long-term
1200109
preservation of electronic documents. It is applicable to documents containing combinations of character, raster and
vector data. This package includes Technical Corrigendum 1:2007 and Technical Corrigendum 2:2011 and is available
as a zip file. 31 pp.

IT8 Standards
IT8.6 – 2002
Graphic technology - Prepress digital data exchange - Diecutting data (DDES3)
1300102 This standard establishes a data exchange format to enable transfer of numerical control information between diecutting
systems and between diecutting systems and electronic prepress systems. The information will typically consist of
numerical control information used in the manufacture of dies. 37 pp.
IT8.7/1 - 1993
Graphic technology - Color transmission target for input scanner calibration
This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set
1300793 used to create the target. It is intended to address the color transparency products that are generally used for input to the
preparatory process for printing and publishing. This standard defines the layout and colorimetric values of a target that
can be manufactured on any positive color transparency film and that is intended for use in the calibration of a
photographic film/scanner combination. 32 pp.

4
PRODUCT
CODE STANDARD DESCRIPTION
IT8.7/2 - 1993
Graphic technology - Color reflection target for input scanner calibration
This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set
1300893 used to create the target. It is intended to address the color photographic paper products that are generally used for input
to the preparatory process for printing and publishing. It defines the layout and colorimetric values of the target that can
be manufactured on any color photographic paper and is intended for use in the calibration of a photographic
paper/scanner combination. 29 pp.
IT8.7/3 - 2010
Graphic technology - Input data for characterization of 4-color process printing
PLEASE NOTE: The IT8.7/4 characterization target provides a more extensive data set than is provided by the
IT8.7/3 target, CGATS recommends that the IT8.7/4 target be used rather than the IT8.7/3 target for all new work
1300110 in characterization of 4-color printing.
This standard defines a data set of ink value combinations that may be used to characterize four-color process printing.
Such characterization data may be created by rendering as images the ink values specified in this document and by
measuring the printed sheet. This standard contains a smaller data set that the related IT8.7/4 standard. 20 pp. + data
files in a zipped file.
IT8.7/4 – 2005
Graphic technology – Input data for characterization of 4-color process printing – Expanded data set
This standard defines a data set of ink value combinations that may be used to characterize four-color process printing.
This data set is not optimized for any printing process or application area, but is robust enough for all general applications.
1300205 The needs of publication, commercial, and package printing with offset lithography, gravure, flexography, and other
printing processes have been considered. While it is primarily aimed at process color printing with CMYK inks, it may also
be used with any combination of three chromatic inks and a dark ink. It is seen as an alternate to the IT8.7/3 data set
where more data is desired. 22 pp. + data files in a zipped file.

ISO Standards
These publications are also available from ISO member bodies.
ISO 5-1:2009
Photography and graphic technology – Density measurements – Part 1: Geometry and functional notation
1400114 This part of ISO 5 establishes terms, symbols, functional notations and a coordinate system to describe geometric and
spectral conditions for the measurement of the degree to which a specimen modulates radiant flux for application in
photography, graphic technology, and radiometry. 24 pp.
ISO 5-2:2009
Photography and graphic technology – Density measurements – Part 2: Geometric conditions for transmittance
1400214 density
This part of ISO 5 specifies the geometric conditions for measuring ISO 5 standard diffuse and ƒ/4,5 and ƒ/1,6 projection
transmittance densities.20 pp.
ISO 5-3:2009
Photography and graphic technology – Density measurements – Part 3: Spectral conditions
1400314 This part of ISO 5 specifies spectral conditions and computational procedures for the definition of several types of I
SO 5 standard densities used in imaging applications in photography and graphic technology. This is provided as a zip file
that includes electronic inserts. 50 pp.
ISO 5-4:2009
Photography and graphic technology – Density measurements – Part 4: Geometric conditions for reflection
density
1400414
This part of ISO 5 specifies the geometric conditions for the definition of ISO-5 standard reflection density. It also
recommends tolerances on geometric conditions that can be used in the design of instruments. The spectral conditions
are specified in ISO 5-3. 22 pp.
ISO 2834-1:2006
Graphic technology – Laboratory preparation of test prints – Part 1: Paste inks
This part of ISO 2834 specifies a laboratory method for the preparation of printed samples made with paste inks (such as
1400406
inks used for lithographic and letterpress printing). Such printed samples are intended to be used for reflection based
measurements, such as colorimetry and reflection density as well as for testing light fastness, and the resistance of
printing inks to mechanical and chemical attack regarding either printing ink and/or substrate. 7 pp.
ISO 2834-2:2015
Graphic technology – Laboratory preparation of test prints – Part 2: Liquid printing inks
This part of ISO 2834 specifies a test method for preparation of test prints produced with liquid water-based or solvent-
1400315 based printing inks as used in flexography and gravure printing. These test prints are intended primarily for optical tests,
such as gloss, colorimetry, transparency and reflection density. They can also be used for light fastness and the
chemical, physical and mechanical resistance to mechanical and chemical attack regarding either printing ink and/or
substrate. Flexographic inks with higher viscosity, such as those cured by radiation are also covered. 8 pp.

5
PRODUCT
CODE STANDARD DESCRIPTION
ISO 2834-3:2008
Graphic technology – Laboratory preparation of test prints – Part 3: Screen printing inks
This part of ISO 2834 specifies a test method for preparation of test prints produced with screen printing inks. These test
1401308 prints are intended primarily for optical tests, such as colorimetry, transparency and reflection density as describe din ISO
2846-4. They can also be used for testing gloss, light fastness and the chemical, physical and mechanical resistance to
mechanical and chemical attack regarding either printing ink or substrate, or both. 7 pp.
ISO 2836:2004
Graphic technology - Prints and printing inks - Assessment of resistance to various agents
1400504
This International Standard specifies methods of assessing the resistance of printed materials to liquid and solid agents,
solvents, varnishes, and acids. 14 pp.
ISO 2846-1:2017
Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 1: Sheet-fed and
heat-set web offset lithographic printing
This document specifies the colour and transparency characteristics that are to be met by each ink in a process colour
ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a
1401017 laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined.
Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes.

This document does not apply to fluorescent inks and it does not specify pigments (or spectral characteristics — except
informatively) in order not to preclude developments which may enable different pigment combinations to be used
advantageously while still achieving the colorimetric requirements specified in this document.
ISO 2846-2:2007
Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part 2: Coldset offset
lithographic printing
This part of ISO 2846 specifies the colour and transparency to be produced by inks intended for four-colour coldset web
1401007
offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure
conformance. It is no appliicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to
preclude the use of future suitable pigment combinations and still claim compliance with its colorimetric requirements. 11
pp.
ISO 2846-3:2002
Graphic technology - Colour and transparency of printing ink sets for four-colour-printing - Part 3: Publication
gravure printing
This part of ISO 2846 specifies the colour and transparency to be produced by a process colour ink set including
1400502 extender intended for four-colour publication gravure printing when printed under specified gravure printing conditions. It
also specifies the test method to ensure conformance. This part of ISO 2846 does not specify pigments (or spectral
reflectance) in order not to preclude developments which may enable different pigment combinations to be used
advantageously while still achieving the colorimetric requirements specified in this part of ISO 2846. This part of ISO
2846 may also apply to certain non-publication gravure applications. 13 pp.
ISO 2846-5:2005
Graphic technology - Colour and transparency of printing ink sets for four-colour printing - Part 5: Flexographic
printing
1400105
This part of ISO 2846 specifies the colour and transparency to be produced by each ink in a process colour ink set
(including extender) intended for four-colour flexographic printing, when printed under specified flexographic printing
conditions. It also describes the conformance test method. 20pp.
ISO 3664:2009
Graphic technology and photography – Viewing conditions
This International Standard specifies viewing conditions for images on both reflective and transmissive media, such as
prints (both photographic and photomechanical) and transparencies, as well as images displayed in isolation on colour
1400609
monitors. This applies in particular to: critical comparison between transparencies, reflection photographic or
photomechanical prints and/or other objects or images; appraisal of the tone reproduction and colourfulness of prints;
critical appraisal of transparencies; and appraisal of images on colour monitors. This International Standard is not
applicable to unprinted papers. 44 pp.
ISO 5776:2016
Graphic technology - Symbols for text proof correction
This International Standard specifies symbols for use in copy preparation and proof correction in alphabetic languages
1400216 and in logographic languages. It is applicable to texts submitted for correction, whatever their nature or presentation
(manuscripts, typescripts, printer’s proofs, etc.), and for marking up copy for all methods of composition. Symbols for the
correction of mathematical texts and colour illustrations are not included.
ISO/TS 10128:2009
Graphic technology – Methods of adjustment of the colour reproduction of a printing system to match a set of
characterization data
1400612
This Technical Specification specifies methods for the adjustment of the digital content data that is input to a printing
system to achieve consistency in the printed results among a number of presses printing to the same general aim
conditions. 12 pp.

6
PRODUCT
CODE STANDARD DESCRIPTION
ISO 11084-1:1993
Graphic technology - Register systems for photographic materials, foils and paper - Part 1: Three-pin systems
1403893
This International Standard specifies the positions and dimensions for the pins and holes of three-pin register systems to
achieve accurate positioning of originals, separations and printing plates on press and prepress equipment. 3 pp.
ISO 11084-2:2006
Graphic technology - Register systems for photographic materials, foils and paper – Part 2: Register pin
systems for plate making
1400506 This International Standard specifies the shapes, dimensions and positions for the pins and holes of a register system
used to achieve accurate image positioning on a printing plate during the plate-making operations undertaken during the
printing plate preparation process. It is also applicable to plate-bending equipment and transfer systems required to
convert between register pin systems.
ISO 12040:1997
Graphic technology - Prints and printing inks-Assessment of light fastness using filtered xenon arc light
1400497 This International Standard specifies a method for assessing the light fastness of prints and printing inks, by giving the
general test requirements for prints and the special test requirements for inks. Applies to all print substrates such as
paper, board, metals (thin metal sheets and plate) and plastic films and to all printing processes. 5 pp.
ISO 12218:1997
Graphic technology - Process control - Offset platemaking
This International Standard establishes unified terminology, test methods and requirements for the process control of the
1400797
preparation of the offset printing form. It applies to pre-sensitized metal plates and contact exposures. It does not apply
to optical projection or direct writing techniques, or to non-periodic half-tone screens, although the principles may be
applied by analogy. 16 pp.
ISO 12632:2015
Graphic technology – Ink, paper and labels – Requirements on hot alkali penetration and resistance
This International Standard specifies test methods for:
• Penetrability and removal times of labels that have been wet glued on bottles intended to be refilled and
1401515 reused, and;
• Resistance of printed labels against hot alkaline solution.
Test results always deal with systems comprising of substrates, ink films and varnish films if present. This International
Standard is valid for label substrates and printed labels. Label substrates include metalized papers. The test procedures
are also valid for the evaluation of inks and papers to be used in printing labels.
ISO 12634:1996
Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter
1400896 This International Standard specifies the use of a rotary tackmeter to determine the tack value of paste inks and vehicles
which have low volatility and are unreactive under ordinary room conditions during the time span required for testing. 3
pp.
ISO 12635:2008
Graphic technology - Plates for offset printing – Dimensions
1401108 This International Standard specifies the width, length, and thickness of metal lithographic printing plates (referred to
hereafter as "plates"). For plates to be used in computer to plate (CIP) applications, flatness, edge straightness and burr
requirements are also included. These requirements are applicable to unprocessed plates. 11 pp.
ISO 12636:1998
Graphic technology - Blankets for offset printing
1401098 This International Standards defines vocabulary, and specifies test methods, characteristics, ordering and labeling
information for blankets for offset printing. It does not apply to untensioned or unclamped offset blankets, nor offset
printing sleeves used with gapless presses. 8 pp.
ISO 12637-1:2006
Graphic technology – Vocabulary – Part 1: Fundamental terms
1400106
This part of ISO 12637 defines a set of fundamental terms that can be used in the drafting of other International
Standards for graphic technology. 9 pp.
ISO 12637-2:2008
Graphic technology – Vocabulary – Part 2: Prepress terms
1401208 This part of ISO 12637 defines a set of prepress terms which may be used in the drafting of other International Standards
for graphic technology. In order to facilitate their translation into other languages, the definitions are worded so as to
avoid, where possible any peculiarity attached to one language. 15 pp.
ISO 12637-3:2009
1400509 Graphic technology – Vocabulary – Part 3: Printing terms
This part of ISO 12637 defines terms for printing systems and processes. 24 pp.
ISO 12637-4:2008
Graphic technology – Vocabulary – Part 4: Postpress terms
1400608
This part of ISO 12637 defines a set of postpress terms which may be used in the drafting of other International
Standards for graphic technology.
ISO 12639:2004
1401310
See CGATS/ISO 12639:2004 (an identical national adoption)
ISO 12639:2004/Amd 1:2007
1400211
See CGATS/ISO 12639:2004/Amd 1:2007 (an identical national adoption)
7
PRODUCT
CODE STANDARD DESCRIPTION
ISO 12640-1:1997
1401410
See CGATS/ISO 12640-1:2007 (an identical national adoption)
ISO 12640-2:2004
1401510
See CGATS/ISO 12640-2:2007 (an identical national adoption)
ISO 12640-3:2007
1401610
See CGATS/ISO 12640-3:2007 (an identical national adoption)
ISO 12640-4:2011
Graphic technology – Prepress digital data exchange – Part 4: Wide gamut display-referred standard colour
image data [Adobe RGB (1998)/SCID]
This part of ISO 12640 specifies a set of standard wide gamut display-referred colour images [encoded as 16-bit Adobe
1400411
RGB (1998) digital data] that can be used for the evaluation of changes in image quality during coding, image processing
(including colour re-rendering and colour space transformations, compression and decompression), displaying on a
colour monitor and printing. These images can be used for research, testing and assessing of output systems such as
printers, colour management systems and colour profiles. This standard is only available on DVD.
ISO 12640-5:2013
Graphic technology – Prepress digital data exchange – Part 5: Scene-referred standard colour image data
(RIMM/SCID)
This part of ISO 12640 specifies a set of standard scene-referred colour images (encoded as 16-bit RIMM RGB digital
1400514
data) that can be used to evaluate transforms from a scene-referred image state to an output-referred image state (colour
rendering transforms). They can be used for research, testing and assessing colour rendering transforms, in systems
such as digital cameras, camera raw processing applications, colour management systems, colour profiles, and output
devices such as displays and printers. This standard is only available as a DVD.
ISO 12641-1:2016
Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1:
Colour targets for input scanner calibration
1400616
This part of ISO 12641 defines the layout and colorimetric values of targets for use in the calibration of a photographic
product/input scanner combination (as used in the preparatory process for printing and publishing). One target is defined
for positive colour transparency film and another is defined for colour photographic paper.
ISO 12642-1:2011
1400611 Graphic technology - Input data for characterization of four-colour process printing – Part 1: Initial data set
See CGATS/ISO 12642-1(IT8.7/3) (an identical national adoption)
ISO 12642-2:2006
Graphic technology – Input data for characterization of 4-colour process printing – Part 2: Expanded data set This
part of ISO 12642 defines a data set of ink value combinations that are intended to be used to characterize 4-color
1401106
process printing. It is not optimized for any printing process or application area, but is robust enough for all general
applications. It is an alternative to the ISO 12642-1 data set when more robust data is required. It is technically equivalent
to ANSI IT8.7/4-2005. Zipped file containing 29 pp document + several data files.
ISO 12644:1996
Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod
1401696 viscometer
This International Standard specifies the use of a falling rod viscometer to determine the viscosity and yield value of
paste inks and vehicles which are unreactive under ordinary room conditions. 12 pp.
ISO 12645:1998
Graphic technology - Process control- Certified reference material for opaque area calibration of transmission
1401798 densitometers
This International Standard defines requirements for a half-tone certified reference material, which may be used for the
opaque area percentage calibration of transmission densitometers of colorimeters for use in the graphic arts. 10 pp.
ISO 12646: 2015
Graphic technology — Displays for colour proofing — Characteristics
1400515 This International Standard specifies requirements for two conformance levels for the characteristics of displays to be
used for soft proofing of colour images. Included are requiremetns for uniformity and variatios of electro-optical properties
with viewing direction for different driving signals. 12 pp.
ISO 12647-1:2013
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production
prints - Part 1: Parameters and measurement methods
1400614 This part of ISO 12647 defines and explains the minimum set of primary process control parameters required to uniquely
specify the visual characteristics and related technical properties of process-specific production prints and process-
independent simulations of fully characterized printing conditions. This third edition cancels and replaces the second
edition (ISO 12647-1:2004). 24 pp.

8
PRODUCT
CODE STANDARD DESCRIPTION
ISO 12647-2:2013
Graphic technology - Process control for the manufacture of half-tone colour separations, proof and production
prints - Part 2: Offset lithographic processes
This part of ISO 12647 specifies a number of process parameters and their values to be applied when producing colour
1400714 separations, printing forms and print production for four-colour sheet-fed and web-fed offset printing presses excluding
coldest offset lithography on newsprint. This third edition cancels and replaces the second edition which has been
extensively revised. The revisions include deletion of film-based requirements; changes in proof requirements; changes
in printing conditions; changes in the colouration of the primary and secondary solids; introduction of new tone value
increase curves; general clean up. 32 pp.
ISO 12647-3:2013
Graphic technology - Process control for the manufacture of half-tone colour separations, proofs and production
prints - Part 3: Coldset offset lithography on newsprint
1400814 This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour
separations for newspaper single or four-colour printing and proofing. The parameters and values are chosen in
consideration of the complete process, covering the process stages: “colour separation”, “film setting”, “making of the
printing forme”, “proof production” and “production printing”. 15 pp.
ISO 12647-4:2014
Graphic technology – Process control for the production of half-tone colour separations, proof and production
prints – Part 4: Publication gravure printing
1401014
This part of ISO 12647 specifies a number of process parameters and their values to be applied to four-colour publication
gravure printing. The parameters and values are chose in view of the complete process covering the process stages
"colour separation", "making of the printing forme", "proof production" and "production printing". 17pp.
ISO 12647-5:2015
Graphic technology — Process control for the manufacture of half-tone colour separations, proof and
production prints — Part 5: Screen printing
1400115
This part of ISO 12647 specifies the requirements for the screen printing of four-colour process-colour material used for
display, signage, and graphics using flat bed or cylinder printing equipment. Both the sie and resolution of the finished
product are unrestricted. 16 pp.
ISO 12647-6:2012
Graphic technology – Process control for the production of half-tone colour separations, proofs and production
prints – Part 6: Flexographic printing
1400512 This part of ISO 12647 specifies the requirements for the exchange of data and information necessary for the definition of
the aims for four-color flexographic printing of packaging and publication materials, including newsprint. It is based on
the use of color characterization data to define the colorimetric printing aims and includes appropriate assignment of
responsibility for and recommended tolerances on critical parameters of the flexographic printing process. 22 pp.
ISO 12647-6:2012/Amd1:2015
Graphic technology – Process control for the production of half-tone colour separations, proofs and production
1401215 $22
prints – Part 6: Flexographic printing – Amendment 1
This document amends ISO 12647-6:2012.
ISO 12647-7:2016
Graphic technology – Process control for the production of half-tone colour separations, proof and production
prints – Part 7: Proofing processes working directly from digital data
1401216
This document specifies requirements for systems that are used to produce hard-copy digital proof prints intended to
simulate a printing condition defined by a set of characterization data. Recommendations are provided with regard to
appropriate test methods associated with these requirements.
ISO 12647-8:2012
Graphic technology – Process control for the production of half-tone colour separations, proofs and production
prints – Part 8: Validation print processes working directly from digital data
1400312
This part of ISO 12647 specifies requirements that can be used for determining the conformance of systems that produce
a hard-copy validation print, directly from digital data, which is intended to simulate the expected appearance of material
printed in accordance with a characterized printing condition. 16 pp.
ISO/TR 12705:2011
Graphic technology – Laboratory test method for chemical ghosting in lithography
1400711 This Technical Report describes a laboratory method, using a printability tester, for the preparation of specimens in order
to evaluate the tendency of a particular ink, substrate and printing procedure to produce chemical ghosting in sheet-fed
offset lithography on coated papers or foils. 10 pp.
ISO 13655:2017
Graphic technology — Spectral measurement and colorimetric computation for graphic arts images
This document specifies procedures for the measurements and colorimetric computations appropriate to objects that
reflect, transmit and emit light, such as flat-panel displays. It also specifies procedures for computation of colorimetric
1400617 parameters for graphic arts images. Graphic arts include, but are not limited to, the preparation of material for, and
volume production by, production printing processes that include offset lithography, letterpress, flexography, gravure,
screen and digital printing.

This document does not address spectral measurements appropriate to other specific application needs, such as those
used during the production of materials, for example, printing paper and proofing media.
9
PRODUCT
CODE STANDARD DESCRIPTION
ISO 14020:2000
Environmental labels and declarations – General principles
1401311 This International Standard establishes guiding principles for the development and use of environmental labels and
declarations. It is intended that other applicable standards in the ISO 14020 series be used in conjunction with this
International Standard. 5 pp.
ISO 14040:2006
Environmental management – Life cycle assessment – Principles and framework
1400811 This International Standard describes the principles and framework for life cycle assessment (LCA). It covers LCA studies
and life cycle inventory (LCI) studies. It does not describe the LCA technique in detail, nor does it specify methodologies for
the individual phases of the LCA. 20 pp.
ISO 14044:2006
Environmental management – Life cycle assessment – Requirements and guidelines
1400911
This International Standard specifies requirements and provides guidelines for life cycle assessment (LCA). It covers LCA
studies and life cycle inventory (LCI) studies. 46 pp.
ISO 14064-1:2006
Greenhouse gases – Part 1: Specification with guidance at the organization level for quantification and reporting of
greenhouse gas emissions and removals
1401211
This part of ISO 14064 specifies principles and requirements at the organization level for quantification and reporting of
greenhouse gas (GHG) emissions ane removals. It includes requirements for the design, development, management,
reporting and verification of an organization's GHG inventory. 20 pp.
ISO 14298:2013
Graphic technology — Management of security printing processes
This International Standard specifies requirements for a security printing management system for security printers. It
1400113 specifies a minimum set of security printing management system requirements. It is intended to apply to security printers. It
contains requirements that when implemented by a security printer may be objectively audited for certification/registration
purposes. Organizations ensure that customer security requirements are met as appropriate provided these do not conflict
with the requirements of this International Standard.
ISO/TR 14672:2000
Graphic technology - Statistics of the natural SCID images defined in ISO 12640
1400400 This Technical Report provides the colour and spatial frequency distribution statistics associated with digital image data of
International Standard 12640, Graphic technology - Prepress digital data exchange - CMYK standard colour image data
(CMYK/SCID). 63 pp.
ISO 14861:2015
Graphic technology – Requirements for colour soft proofing systems
This International Standard specifies requirements for systems that are used to produce, from digital data, images on
1400715 electronic displays that are intended to simulate a characterized printing condition defined by a set of characterization
data and spot colours defined by a physical reference. Recommendations are provided with regard to equipment
selection, setup, operating, and environmental conditions. Appropriate test methods associated with these requirements
are specified.
ISO 15076-1:2010
Image technology colour management – Architecture, profile format and data structure – Part 1: Based on
ICC.1:2010
1402610
This part of ISO 15076 specifies a colour profile format and describes the architecture within which it can operate. This
architecture supports the exchange of information which specifies the intended colour image processing of digital data.
The required reference colour spaces and the data structures (tags) are also specified. 130 pp.
ISO/TS 15311-1; 2016
Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1:
Measurement methods and reporting schema
This part of ISO/TS 15311 defines print metrics, measurement methods and reporting requirements for printed sheets
1400416
that are suitable for all classes of printed products. Guidance as to which of these metrics to apply to any given category
of product along with acceptable conformance criteria is provided in subsequent parts of ISO/TS 15311. Although this
part of ISO/TS 15311 is expected to be used primarily to measure prints from digital printing systems, the metrics are
general and can be applied to other kinds of print.
ISO/PAS 15339-1:2015
Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles This part of
ISO/PAS 15339 establishes principles for the use of colour characterization data as the definition of the intended relationship
between input data and printed colour for copy preparation, job assembly, proofing, and graphic arts production printing.
1400815 Additional parts of ISO/PAS 15339 specify a limited number of characterized reference printing conditions that span the
expected range of colour gamuts used for the production of printed material from digital data, regardless of printing process
used. The procedure to be used to adjust colour characterization data for the normally expected range
of substrate colour is specified.

ISO/PAS 15339-2:2015
Graphic technology — Printing from digital data across multiple technologies — Part 2: Characterized reference
printing conditions, CRPC1–CRPC7
1400915
This part of ISO/PAS 15339 specifies a limited number of characterized reference printing conditions that
span the expected range of colour gamuts used for the production of printed materials from digital data,
regardless of the printing process used. Their use is described in ISO/PAS 15339-1.
10
PRODUCT
CODE STANDARD DESCRIPTION
ISO 15341:2014
Graphic technology — Method for radius determination of printing cylinders
1401214
This Internaitonal Standard defines a method for measuring the external radius of printing cylinders, specifies critical
parameter and operational instructions and provides recommendations for instrument design. 17 pp.
ISO 15397:2014
Graphic technology – Communication of graph paper properties
1400914 This International Standard specifies the list of relevant properties of paper substrates to be communicated between the
paper and printing industries. It is applicable to papers intended to be printed in rotogravure, cold-set web offset, heat-set
web offset, sheet-fed offset, and flexographic printing processes and to proofing substrates. 20 pp.
ISO/IEC 15426-1:2006(E)
Information technology — Automatic identification and data capture techniques — Bar code verifier
conformance specification — Part 1: Linear symbols
1400117 This part of ISO/IEC 15426 defines test methods and minimum accuracy criteria for verifiers using the methodology of
ISO/IEC 15416 for linear bar code symbols, and specifies reference calibration standards against which these should be
tested. This part of ISO/IEC 15426 provides for testing of representative samples of the equipment.
NOTE ISO/IEC 15426-2 applies to verifiers for two dimensional bar code symbols.
ISO/IEC 15426-2:2015(E)
Information technology — Automatic identification and data capture techniques — Bar code verifier onformance
specification — Part 2: Two-dimensional symbols
This part of ISO/IEC 15426 defines test methods and minimum accuracy criteria applicable to verifiers using the
1400217 methodologies of ISO/IEC 15415 for multi-row bar code symbols and two-dimensional matrix symbologies, and specifies
reference calibration standards against which these should be tested. This part of ISO/IEC 15426 provides for testing of
representative samples of the equipment.
NOTE ISO/IEC 15426‑1 applies to verifiers for linear bar code symbols.
ISO 15790:2004
1401910
See CGATS/ISO 15790:2005 (an identical national adoption)
ISO 15930-1:2001
1402010
See CGATS/ ISO 15930-1:2004 (R2006) (an identical national adoption)
ISO 15930-3:2002
1402110
See CGATS/ISO 15930-3:2004 (an identical national adoption)
ISO 15930-4:2003
1402210
See CGATS/ISO 15930-4:2004 (an identical national adoption)
ISO 15930-6:2003
1402410
See CGATS/ISO 15930-6:2004 (an identical national adoption)
ISO 15930-7:2010
1401010
See CGATS/ISO 15930-7:2010 (an identical national adoption)
ISO 15930-8:2010
1401110
See CGATS/ISO 15930-8:2010 (an identical national adoption)
ISO/TR 16044:2004
Graphic technology – Database architecture model and control parameter coding for process control and
workflow (Database AMPAC)
This Technical Report specifies a basic standard architecture model and parameters used in a database for printing-
1400604
process control and workflow description. It defines how all of the parameters impacting a manufacturing system are
classified by using a layer structure. The upper two layers categorize the systems and system elements and set the
structure for the process. The following third and forth layers characterize all details of the parameters used in the
printing system, including standard coding rules. 22 pp. Win Zip Copy Only
ISO/TR 16066:2003
Graphic technology – Standard object colour spectra database for colour reproduction evaluation (SOCS)
This Technical Report provides a database of typical and difference sets of existing object colour spectral data that are
1400103 suitable for evaluating the colour reproduction of image input devices. It also includes the spectral reflectance and
transmittance source data from which these data sets have been derived. Zipped file (20,332 KB), containing PDF file
and additional zipped file. Unzipping program required to access report. Available on CD or as a download (a URL will
be provided.)
ISO 16612-1:2005
Graphic technology – Variable printing data exchange – Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
This part of ISO 16612 specifies the methods for the use of the Personalized Print Markup Language (PPML) and the
1400705 Portable Document Format (PDF) for the exchange or identification of all elements necessary to render a variable data
imaging job as intended by the sender. This part of ISO 16612 specifies document layout and content data and makes
provision for product intent specifications using the Job Definition Format (e.g. paper selection, binding, finishing, etc.) 31
pp.

11
PRODUCT
CODE STANDARD DESCRIPTION
ISO 16612-2:2010
Graphic technology – Variable data exchange – Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
This part of ISO 16612 defines the PDF/VT document format and methods to enable reliable document exchange for
variable data and transactional (VT) printing. It uses the Portable Document Format (PDF) Version 1.6, as restricted by
1400810
PDF/X-4 and PDF/X-5, for the representation of such documents. It allows the specification of document structure and
layout, content data, and interaction of graphical objects in a graphics model that supports transparency and both device-
dependent and device-independent colour spaces. All elements are either included or provision is made for unique
identification of externally supplied graphical content or ICC profiles. 44 pp.
ISO 16613-1:2017
Graphic technology — Variable content replacement —Part 1: Using PDF/X for variable content replacement
(PDF/VCR-1)
This document enables variable data printing applications using PDF template-based variable content substitution where
— a PDF template file containing pages with variable content substitution fields (placeholders) is delivered ahead of a
print production run and may be reused across multiple print production runs, and
— PDF-based variable data substitution content is provided during print production and merged with the PDF template to
produce final form variable content page output.
This document defines PDF/VCR (PDF for variable content replacement), a set of base technical requirements for a PDF
template file format, a PDF-based variable data substitution content format and a framework for in-RIP variable content
merging. The PDF/VCR base technical requirements do not include writer and processor conformance.
This document also defines the PDF/VCR-1 conformance level which is based on the PDF/VCR base technical
requirements and defines conformance requirements for:
— the PDF/VCR-1 template file format;
— the PDF/VCR-1 data sequence format, a variable data substitution content format;
1400917
— a PDF/VCR-1 writer, a software application which can generate PDF/VCR-1 template files;
— a PDF/VCR-1 data provider, a software application which can generate PDF/VCR-1 data sequences;
— a PDF/VCR-1 processor, a software application which can perform substitution (replacement) of
PDF/VCR-1 template placeholder objects with substitution content provided within a PDF/VCR-1 data sequence.
NOTE 1 Additional conformance levels can be added at a later time based on the same PDF/VCR base technical
requirements.
NOTE 2 A conforming PDF/VCR-1 template file contains all necessary information for variable content printing
by adding matching substitution content. Generating the substitution content usually requires additional
information not present in the template file.
The template file format defined in this document is based on the ISO 15930 (PDF/X) family of standard formats for the
representation of a single or multiple page template containing both static content and stylized variable content
placeholders.
The variable data format defined in this document is based on the CSV file format defined in RFC 4180. It supports the
representation of substitution content data that can be merged into the template’s variable content placeholders to
produce complete page content utilizing the full PDF graphics model.
ISO 16684-1:2012
Graphic technology – Extensible metadata platform (XMP) specification – Part 1: Data model, serialization and
core properties
This part of ISO 16684 defines two essential components of XMP metadata – the data model which defines the forms of
1400112
XMP metadata items, essentially the structure of statements that XMP can make about resources and serialization which
defines how any instance of the XMP data model can be recorded as XML. This document also defines a collection of
core properties which are XMP metadata items that can be applied across a broad range of file formats and domains of
usage. 43 pp.
ISO 16684-2:2014
Graphic technology — Extensible metadata platform (XMP) — Part 2: Description of XMP schemas using RELAX
1401314 NG
This part of ISO 16684 specifies the use of RELAX NG to describe the serialized XMP metadata. This applies to how
conforming schemas can use the features of RELAX NG.
ISO 16759:2013
Graphic technology – Quantification and communication for calculating the carbon footprint of print media
products
This International Standard specifies the requirements for quantifying the carbon footprint of those processes, materials
and technologies required to produce print media products using any form of printing technology and that are within the
user’s knowledge and control. It is based on a Life Cycle Assessment (LCA) approach, using defined system boundaries
1400413 and a specified functional unit as the basis for complete or partial carbon footprinting studies. This data can be
referenced throughout supply chains for individual print media products. Together with ISO 14020 and other ISO
standards, this International Standard defines standards of completeness to be followed when communicating the results
of a carbon footprint study for print media products to business and consumers. This International Standard provides a
framework for carbon calculators that organisations can follow, and that can be used as the structure for market or
sector-specific carbon footprinting tools. Studies and tools constructed within this framework methodology provide carbon
footprint quantifications of print media products that can be validated and verified. 48 pp

12
PRODUCT
CODE STANDARD DESCRIPTION
ISO 16760:2014
Graphic technology — Prepress data exchange — Preparation and visualization of RGB images to be used in
RGB-based graphic arts workflows
1401114
This International Standard specifies requirements for an RGB workflow for graphic arts printing based on the use of
reflection prints (RGB Reference Prints) as the evaluation vehicle for coloured images. It provides guidelines on the
creation of print-targeted RGB images (RGB Reference Images) and simulation prints.
ISO 16762:2016
Graphic technology — Post-press — General requirements for transfer, handling and storage
1401316 This document specifies the requirements for the handling, storage and transfer of printed products between printing and
post-press. It also identifies information that may be necessary for successful completion of post-press operations (job
ticket). In addition, the handling of materials used within the post-press operation is specified.
ISO 16763:2016
Graphic technology — Post-press — Requirements for bound products
1400116 This International Standard specifies quality requirements and tolerances of bound products and intermediate
components. It is applicable to products requiring industrial binding, for example, books, magazines, catalogues and
brochures.
ISO 17972-1:2015
This part of ISO 17972 defines an exchange format for colour and process control data (and the associated metadata
necessary for its proper interpretation) in electronic form. It is the base document for describing the use of CxF3 for data
1400215 exchange. Where required, this part of ISO 17972 also defines additional requirements for a valid CxF/X file. Using XML,
all CxF3 and CxF/X documents also support the exchange of data outside of the graphic arts workflow and can support
future standards with an extensible architecture using standard XML Names and Metadata tags which can be used with
standard XML tools and pass XML validation. 17 pp.
ISO 17972-2:2016
Graphic technology — Colour data exchange format (CxF/X) — Part 2: Scanner target data (CxF/X-2)
This part of ISO 17972 defines an exchange format for target input values, colour and process control data relating to
1400516
scanner targets (and the associated metadata necessary for its proper interpretation) in electronic form. This part of ISO
17972 includes the use of a CustomResource element within the CxF framework to define a minimum set of data for
exchange and identify the data as being part of ISO 12641.
ISO 17972-4:2015
This part of ISO 17972 defines an exchange format for spectral measurement data of inks to provide a means to
1400615 characterize spot colour inks to allow reliable printing and proofing of products that have been designed using these inks.
Only isotropic (paper-like) substrates are within the scope of this part of ISO 17972 which is limited to application areas
where the same ink and paper combination that has been characterised is used when printing. 12 pp.
ISO 18619:2015
Image technology colour management — Black point compensation
This International Standard specifies a procedure, including computation, by which a transform between ICC profiles can
1400415 be adjusted (compensated) to take into account differences between the dark end of the source colour space and the
dark end of the destination colour space. This is referred to as black point compensation (BPC). The relative colorimetric
encoding of ICC profile transforms already provides a mechanism for such adjustment of the light (white) end of the tone
scale.
ISO 18620:2016
Graphic technology — Prepress data exchange — Tone adjustment curves exchange
1400316
This International Standard specifies a simple extensible format for the exchange of tone adjustment curves between
applications including but not limited to colour management, calibration and raster image processor systems.
ISO 19005-1:2005
1402510
See CGATS/AIIM/ISO 19005-1:2005 (an identical national adoption)
ISO/TR 19300:2015
Graphic technology — Guidelines for the use of standards for print media production
1401015 This Technical Report provides guidelines to enable print industry stakeholders to use ISO/TC 130 and related standards
in print media production workflows. The use of these standards is intended to enhance production quality, business
performance, profitability and sustainability.
ISO 19445:2016
Graphic technology — Metadata for graphic arts workflow — XMP metadata for image and document proofing
1400716 This International Standard specifies the set of metadata to be used to communicate the approval status, proof
preparation and viewing parameters for images and documents that are used in the graphic arts print production
workflow.
ISO 19594:2017
Graphic technology — Test method for the determination of the binding strength for perfect-bound products —
1400317 Page-pull test working upwards
This document specifies a test method for the determination of the binding strength of perfect-bound products by pulling
out single sheets from the book block in an upward direction.
ISO 20654:2017
Graphic technology — Measurement and calculation of spot colour tone value
This document defines a metric for assessing intermediate tones of a spot ink. This method for the calculation of Spot
1400717
Colour Tone Value (SCTV) produces approximately uniform visual spacing of tones between substrate and solid. It can
be calculated from spectral reflectance or colorimetric measurements of the solid ink, substrate and one or more patches
of intermediate tones to be measured.
13
PRODUCT
CODE STANDARD DESCRIPTION
ISO 22028-1:2016
Photography and graphic technology – Extended colour encodings for digital image storage, manipulation and
interchange – Part 1: Architecture and requirements
This part of ISO 22028 specifies a set of requirements to be met by any extended-gamut colour encoding
that is to be used for digital photography and/or graphic technology applications involving digital
image storage, manipulation and/or interchange. This part of ISO 22028 is applicable to pictorial digital images that originate
1400417
from an original scene, as well as digital images with content such as text, line art, vector graphics and other forms of original
artwork. This part of ISO 22028 also describes a reference image-state-based digital imaging architecture, encompassing
many common workflows, that can be used to classify extended colour encodings into a number of different image states.
However, this part of ISO 22028 does not specify any particular workflow(s) that are to be used for digital photography and/or
graphic technology applications.

ISO 22028-2:2013
Photography and graphic technology – Extended colour encodings for digital image storage, manipulation and
interchange – Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)
1400108 This Technical Specification defines a family of extended colour-gamut output-referred RGB colour image encodings
designated as Reference output medium metric RGB (ROMM RGB). Digital images encoded using ROMM RGB can be
manipulated, stored, transmitted, displayed, or printed by digital still picture imaging systems. Three precision levels are
defined using 8-, 12- and 16-bits/channel. It revises and replaces ISO/TS 22028-2:2006. 17 pp.
ISO/TS 22028-3:2012
Photography and graphic technology – Extended colour encodings for digital image storage, manipulation and
interchange – Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)
This part of ISO 22028 specifies a family of scene-referred extended colour gamut RGB colour image encodings
1400208 designated as Reference input medium metric RGB (RIMM RGB). Digital images encoded using RIMM RGB can be
manipulated, stored, transmitted, displayed, or printed by digital still picture imaging systems. Three precision levels are
defined using 8-, 12- and 16-bits/channel. An extended luminance dynamic range version of RIMM RGB is also defined
designated as Extended reference input medium metric RGB (ERIMM RGB). Two precision levels of ERIMM RGB are
defined using 12- and 16-bits/channel. It revises and replaces ISO/TS 22028-3:2006. 18 pp.
ISO/TS 22028-4:2012
Photography and graphic technology – Extended colour encodings for digital image storage, manipulation and
interchange – Part 4: European Colour Initiative RGB colour image encoding [eciRGB (2008)]
1400517 This Technical Specification defines an extended colour-gamut output-referred RGB colour image encoding designated
as European Colour Initiative RGB [eciRGB (2008)]. Digital images encoded using eciRGB (2008) can be manipulated,
stored, transmitted, displayed, or printed by digital still picture imaging systems. Two precision levels are defined, using 8
bits/channel and 16 bits/channel.
ISO 28178:2009
Graphic technology – Exchange format for colour and process control data using XML or ASCII text
This International Standard defines an exchange format for colour and process control data (and the associated metadata
1400409 necessary for its proper interpretation) in electronic form using either XML or ASCII formatted data files. It maintains
human readability of the data as well as enabling machine readability. It includes a series of predefined tags and
keywords, and provides extensibility through provision for the dynamic definition of additional tags and keywords as
necessary. It is focused primarily on spectral measurement data, colorimetric data, and densitrometric data. 36 pp.
ISO 32000-1:2008
Document management – Portable document format – Part 1: PDF 1.7
This International Standard specified a digital form for representing electronic documents to enable users to exchange
1400309 and view electronic documents independent of the environment in which they were created or the environment in which
they are viewed or printed. It is intended for the developer or software that creates PDF files (conforming writers),
software that reads existing PDF files and interprets their contents for display and interaction (conforming readers) and
PDF products that read and/or write PDF files for a variety of other purposes (conforming products). 747 pp.
ISO 32000-2:2017
Document management — Portable document format —Part 2: PDF 2.0
This document specifies a digital form for representing electronic documents to enable users to exchange and view
electronic documents independent of the environment in which they were created or the environment in which they are
viewed or printed. It is intended for developers of software that creates PDF files (PDF writers), software that reads
existing PDF files and (usually) interprets their contents for display (PDF readers), software that reads and displays PDF
content and interacts with the computer users to possibly modify and save the PDF file (interactive PDF processors) and
1400817 PDF products that read and/or write PDF files for a variety of other purposes (PDF processors). (PDF writers and PDF
readers are more specialised classifications of interactive PDF processors and all are PDF processors).
This document does not specify the following:
•specific processes for converting paper or electronic documents to the PDF file format;
•specific technical design, user interface implementation, or operational details of rendering;
•specific physical methods of storing these documents such as media and storage conditions;
•methods for validating the conformance of PDF files or PDF processors;
•required computer hardware and/or operating system.

14
PRODUCT
CODE STANDARD DESCRIPTION
ISO/IEC Guide 99:2007
International vocabulary of metrology -- Basic and general concepts and associated terms (VIM)
This Vocabulary contains a set of definitions and associated terms for a system of general concepts used in metrology
along with concept diagrams to demonstrate their relations. Examples and notes are included with many definitions. It
1401207
can be used as a reference for scientists and engineers (physicists, chemists, medical scientists) as well as teachers and
practitioners as they plan or perform measurements. Also useful for governmental and inter-governmental bodies, trade
associations, accreditation bodies, regulators and professional societies. This Vocabulary is intended to promote global
harmonization of terminology used in metrology. English/French. 92 pp.

IEC Standards
(These publications are also available from ISO/IEC member bodies)
IEC 60050-845:1987, Ed. 1.0 (CIE Publication 17.4) [formerly IEC 50(845)]
International Electromagnetic Vocabulary-Chapter 845: Lighting
1500287
This standard includes 950 terms and definitions to facilitate international standardization in the use of quantities, units,
symbols and terminology in this field. English/French/Russian. 369 pp.
IEC 61966-2-1:1999, Ed. 1.0
Multimedia systems and equipment – Colour measurement and management – Part 2-1: Colour management –
Default RGB colour space – sRGB
1500399 This part of IEC 61966 is applicable to the encoding and communication of RGB colours used in computer systems and
similar applications by defining encoding transformations for use in defined reference conditions. If actual conditions differ
from the reference conditions, additional rendering transformations may be required. Such additional rendering
transformations are beyond the scope of this standard. 51 pp.
IEC 61966-2-1, Amd1, Ed. 1.0:2003
Multimedia systems and equipment – Colour measurement and management – Part 2-1: Colour management –
Default RGB colour space – sRGB, Amendment 1
1501003
This Amendment adds Annex F (normative) Default YCC encoding transformation for a standard luma-chromachroma
colour space: sYCC; Annex G (informative) Extended gamut encoding for sRGB: bg-sRGB and its YCC transformation:
bg-sYCC; and Annex H (informative) CIELAB (L*a*b*) transformation to the 1999 standard. 14 pp.
IEC 61966-3:2000, Ed. 1.0
Multimedia systems and equipment – Colour measurement and management – Part 3: Equipment using cathode
ray tubes
This part of IEC 61966 deals with equipment using cathode ray tubes (CRT) to display colour images for use in
multimedia applications, for the purpose of colour management in multimedia systems. The methods of measurement
1500800 standardized are designed to make possible the objective performance assessment and characterization of colour
reproduction of CRT displays which accept red – green – blue analogue or digital signals from electrical input terminals
and output colour images on CRT display screens. It defines input test signals, measurement conditions and methods of
measurement, so as to make possible the colour management and comprehensive comparison of the results of
measurements. It does not specify limiting values for various parameters or colour control within equipment.
English/French. 69 pp.
IEC 61966-4:2000, Ed. 1.0
Multimedia systems and equipment – Colour measurement and management – Part 4: Equipment using liquid
crystal display panels
This part of IEC 61966 defines input test signals, measurement conditions and methods of measurement, so as to make
possible the colour management and comprehensive comparison of the results of measurements, for the purpose of
1500900
colour management in multimedia systems. It deals with equipment using transmissive-type liquid crystal display (LCD)
panels to display colour images for use in multimedia applications. The methods of measurement are designed to make
possible the objective performance assessment and characterization of colour reproduction of LCDs which accept red –
green – blue analogue or digital signals from electrical input terminals and output colour images on LCD screens. It does
not cover colour control within equipment nor does it specify limiting values for various parameters. English/French. 75 pp.
IEC 61966-5:2008, Ed. 2.0
Multimedia systems and equipment – Colour measurement and management – Part 5: Equipment using plasma
display panels
1500109 This part of IEC 61966 defines input test signals, measurement conditions, methods of measurement and reporting of the
measured data, to be used for colour characterization and colour management of plasma display panels in multimedia
systems. Colour control within equipment is outside the scope of this International Standard. It does not specify limiting
values for various parameters. . English 33 pp.
IEC 61966-7-1:2006, Ed. 2.0
Multimedia systems and equipment - Colour measurement and management - Part 7-1: Colour printers - Reflective
prints - RGB inputs
This part of IEC 61966 specifies a set of data in colour test chart files for measurements, sampling of successive prints,
1500206 measurement conditions and forms of reporting the results so as to make possible the characterization of the colour
printer and comparison of the results of measurements. The sets of data for measurements are in colour test chart files
expressed in a red–green–blue colour space, to which corresponding colour images are reproduced on reflective
substrate. The methods of measurement in this standard are designed to be
applicable to reflective colour prints for consumer use. 42 pp.

15
PRODUCT
CODE STANDARD DESCRIPTION
IEC 61966-8:2001, Ed. 1.0
Multimedia systems and equipment - Colour measurement and management - Part 8: Multimedia colour scanners
This part of IEC 61966 is applicable to the characterization and assessment of multimedia colour scanners used in
computer systems, multimedia and similar applications, for the purpose of colour management in multimedia systems.
The methods of measurement standardized in this part are designed to make possible the characterization and objective
1500501 performance assessment of multimedia colour scanners which can capture colour images and output colour information
such as red - green - blue data from reflective originals. The measured results are intended to be used. Measurement
conditions, possible methods of measurement and characterization are defined to make colour management possible. It
does not cover colour control within the equipment; for calibration of prepress input scanners, ISO 12641 will be applied.
38 pp.

IEC 61966-9:2003, Ed. 2.0

Multimedia systems and equipment - Colour measurement and management - Part 9: Digital cameras
This part of IEC 61966 is applicable to the assessment of colour reproduction of digital cameras used in open computer
systems and similar applications, for the purpose of colour management in multimedia systems, typically in the Internet. It
defines test charts, measurement conditions and methods of measurement, so as to make possible the colour
1500603 management in open multimedia systems and comprehensive comparison of the results of measurements for
assessment of digital cameras. The methods of measurement standardized in this part are designed to make possible
the objective performance assessment and characterization of colour reproduction of digital cameras which can capture
colour still and moving images, and output colour information corresponding to red - green - blue digital image data. It
does not cover colour control within digital cameras nor does it specify limiting values for various parameters.
English/French. 38 pp.

16
 SAFETY STANDARDS

PRODUCT
CODE STANDARD DESCRIPTION
B65 Standards
B65-1-2011
Graphic technology – Safety requirements for graphic technology equipment and systems – Part 1: General
requirements
This standard is a modified national adoption of ISO 12643-1:2009, with changes specific to the U.S. market. It provides safety
1100211
specification for the design and construction of new equipment used in prepress systems, printing press systems, binding and
finishing systems, converting systems and stand-alone platen presses. It is applicable to equipment used in stand-alone
mode, or in combination with other machines, including ancillary equipment, in which all themachine actuators (e.g. drives) of
the equipment are controlled by the same control system. 92 pp.
B65-2-2011
Graphic technology – Safety requirements for graphic technology equipment and systems – Part 2: Prepress and
press equipment and systems
1100311
This standard is a modified national adoption of ISO 12643-2:2010, with changes specific to the U.S. market. It revises and
replaces B65.1-2005. It provides safety requirements specific to prepress and press equipment and systems. It is to be used
in conjunction with the general requirements given in B65-1. 51 pp.
B65-3-2011
Graphic technology – Safety requirements for graphic technology equipment and systems – Part 3: Binding and
finishing equipment and systems
This standard is a modified national adoption of ISO 12643-3:2010, with changes specific to the U.S. market. It revises and
1100111
replaces B65.2-2005. It provides safety requirements specific to binding and finishing equipment and systems. It is intended to
be used in conjunction with the general requirements given in B65-1. Applies to equipment used to convert printed or blank
substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applied to processes for
preparing substrate for the printing process. 60 pp.
B65-5-2011
Graphic technology – Safety requirements for graphic technology equipment and systems – Part 5: Stand-alone
platen presses
1100411
This standard is a modified national adoption of ISO 12643-5:2010, with changes specific to the U.S. market. It revises and
replaces B65.5-2005. It provides safety requirements specific to stand-alone platen presses. It is intended to be used in
conjunction with the general requirements given in B65-1. 18 pp.
B65/NAPIM 177.1-2007 (Reaffirmed 2011)
Safety standard – Three-roll printing ink mills
1100206
This standard establishes safety requirements with respect to safety controls, operating procedures and design of three-roll
mills used in the manufacture of printing inks. 20 pp.
B65/NAPIM 177.2-2006 (Reaffirmed 2011)
Safety standard – Printing ink vertical post mixers
1100306
This standard provides safety requirements with respect to the design and operation of vertical post mixers that are designed
to be used in the manufacturing of printing inks. 17 pp.

ISO Standards
(These publications are also available from ISO member bodies)
ISO 4413:2010
Hydraulic fluid power – General rules and safety requirements for systems and their components
1401011 This International Standard specifies general rules and safety requirements for hydraulic fluid power systems and components
usd on machinery. It deals with all significant hazards associated with hydraulic fluid power systems and specifies the
principles fo apply in order to avoid those hazards when the systems are put to their intended use. 46 pp.
ISO 4414:2010
Pneumatic fluid power – General rules and safety requirements for systems and their components
1401111 The International Standard specifies general rules and safety requirements for pneumatic fluid power systems and components
used on machinery. It deals with all significant hazards associated with pneumatic fluid power systems and specifies
principles to apply in order to avoid those hazards when the systems are put to their intended use. 37 pp.
ISO 7000:2012
Graphical symbols for use on equipment - Registered symbols
The ISO 7000 database provides a collection of graphical symbols which are placed on equipment or parts of equipment of
any kind in order to instruct the person(s) using the equipment as to its operation. Each graphical symbol is identified by a
reference number and contains a title, graphical representations in vectorized and non-vectorized formats, and some additional
data as applicable, such as the function or the description of the symbol, the intended use, related symbols or publications.
Various search and navigation facilities allow for easy retrieval of graphical symbols.
ISO 7010:2011
Graphical symbols – Safety colours and safety signs – Registered safety signs
1400511
This International Standard prescribes safety signs for the purposes of accident prevention, fire protection, health hazard
information and emergency evacuation. 132 pp. 17
1400212 ISO 7010:2011/Amendment 1:2012
PRODUCT
CODE STANDARD DESCRIPTION
Graphical symbols – Safety colours and safety signs – Registered safety signs
This amendment includes the addition of 11 new safety signs
ISO 7010:2011/Amendment 2:2012
1400412 Graphical symbols – Safety colours and safety signs – Registered safety signs
This amendment includes the addition of 11 new safety signs
ISO 8031:2009
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance
1401109 This International Standard specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to
determine the resistance of conductive, antistatic and non-conductive hoses and the electrical continuity or discontinuity
between metal end fittings. 15 pp.
ISO 9355-1:1999
Ergonomic requirements for the design of displays and control actuators - Part 1: Human interactions with displays
and control actuators
1404299 This International Standard applies to the design of displays and control actuators on machinery. It specifies general principles
for human interaction with displays and control actuators, to minimize operator errors and to ensure an efficient interaction
between the operator and the equipment. It is particularly important to observe these principles when an operator error may
lead to injury or damage to health. 14 pp.
ISO 9355-2:1999
Ergonomic requirements for the design of displays and control actuators - Part 2: Displays
This International Standard gives guidance on the selection, design and location of displays to avoid potential ergonomic
1404699
hazards associated with their use. It specifies ergonomics requirements and covers visual, audible and tactile displays, and
applies to displays used in machinery (e.g. devices and installations, control panels, operating and monitoring consoles) for
occupational and private use. 22 pp.
ISO 9355-3:2006
Ergonomic requirements for the design of displays and control actuators - Part 2: Control actuators
1400706 This International Standard specifies the ergonomic requirements for, and guidance on, the selection, design and location of
control actuators adapted to the needs of the operator, suitable for the control task in question and taking account of the
circumstances of their use. 34 pp.
ISO 11553-1:2005
Safety of machinery - Laser processing machines – Part 1: General safety requirements
This International Standard describes hazards generated by laser processing machines and specifies safety requirements
1400805
relating to radiation hazards and hazards generated by materials and substances. It also specifies information to be supplied
by manufacturers of such equipment. Not applicable to laser products or equipment manufactured solely for photo lithography,
stereolithography, holography, medical applications or data storage. 16 pp.
ISO/TR 11688-1:1995
Acoustics - Recommended practices for the design of low-noise machinery and equipment - Part 1: Planning
1400495 This International Technical Report is an aid to understanding the basic concepts of noise control in machinery and equipment.
The practice presented is intended to assist designers at any design stage to control the noise of the final product. Reference is
made to numerous technical publications dealing with acoustical problems. 25 pp.
ISO/TR 11688-2:1998
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the
physics of low-noise design
This Technical Report provides the physical background for the low-noise design rules and examples given in ISO/TR 11688-
1400198
11) and supports the use of extensive special literature. It is intended for use by designers of machinery and equipment as
well as users and/or buyers of machines and authorities in the field of legislation, supervision or inspection. Equations given
herein will improve the general understanding of noise control. In many cases they allow a comparison of different versions of
design, but are not useful for the prediction of absolute noise emission values. 51 pp.
ISO 12100:2010
Safety of machinery – General principles for design – Risk assessment and risk reduction
This International Standard specifies basic terminology, principles and a methodology for achieving safety in the design of
1400111 machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. Procedures
are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycles,
and for the elimination of hazards or the provision of sufficient risk reduction. Guidance is given on the documentation and
verification of the risk assessment and risk reduction process. 84 pp.
ISO 12643-1:2009
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General
requirements (see B65-1-2011 for a modified national adoption - $55)
1401209 This part of ISO 12643 provides safety specifications for the design and construction of new equipment used in prepress
systems, printing press systems, binding and finishing systems, converting systems and stand-alone platen presses. It is
applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in
which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system. 81 pp.
ISO 12643-2:2010
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and
press equipment and systems (see B65-2 for a modified national adoption - $43)
1402910 This part of ISO 12643 provides safety requirements specific to prepress and press equipment and systems. It is intended to
be used in conjunction with the general requirements given in ISO 12643-1. it provides additional safety requirements for the
design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control
system. 56 pp. 18
PRODUCT
CODE STANDARD DESCRIPTION
ISO 12643-3:2010
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and
finishing equipment and systems (see B65-3-2011 for a modified national adoption - $45)
1403010 This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. It is intended to
be used in conjunction with the general requirements in ISO 12643-1. It provides additional safety requirements for the design
and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or
otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process. 64 pp.
ISO 12643-4:2010
Graphic technology – Safety requirements for graphic technology equipment and systems – Part 4: Converting
equipment and systems
1400110
This part of ISO 12643 provides safety requirements for the design and construction of converting equipment used in the
package printing, converting and graphic technology industries. It is applicable to converting equipment not covered by other
parts of ISO 12643. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. 58 pp.
ISO 12643-5:2010
Graphic technology – Safety requirements for graphic technology equipment and systems – Part 5: Stand-alone
platen presses (see B65-5 for a modified national adoption - $19)
1402810 This part of ISO 12643 provides safety requirements specific to stand-alone platen presses. It is intended to be used in
conjunction with the general requirements in ISO 12643-1. It provides additional press design safety requirements for the
design and construction of new manually fed or automatic stand-alone platen press systems intended for die-cutting, creasing,
embossing, foil stamping and/or the printing of paper, board and other materials processed in a similar manner. 18 pp.
ISO 13732-1:2006
Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces
– Part 1: Hot surfaces
1400606 This International Standard provides temperature threshold values for burns that occur when human skin is in contact with a
hot solid surface. It also describes methods for the assessment of the risks of burning, when humans could or might touch hot
surfaces with their unprotected skin, and give guidance for cases where it may be necessary to specify temperature limit
values for hot surfaces. 37 pp.
ISO/TS 13732-2:2001
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces -
Part 2: Human contact with surfaces at moderate temperature
1400201
This part of ISO/TS 13732 presents principles and methods for predicting thermal sensation and degree of discomfort in
cases where parts of the body contact solid surfaces at moderate temperatures. Also deals with thermal sensation for
contacts of hands, feet and for sitting position on the floor. 12 pp.
ISO 13849-1:2015
Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design
This part of ISO 13849 provides safety requirements and guidance on the principles for the design and integration of safety-
1401415 related parts of control systems (SRP/CS), including the design of software. For these part of SRP/CS, it specifies characteristics
that include the performance level required for carrying out safety functions. It applies to SRP/CS for high demand and
continuous mode, regardless of the type of technology and energy used (electrical, hydraulic, pneumatic, mechanical,
etc.), for all kinds of machinery. 86 pp.
ISO 13849-2:2012
Safety of machinery - Safety-related parts of control systems - Part 2: Validation
This International Standard specifies the procedures and conditions to be followed for the validation by analysis and testing of
1400803
the safety functions provided and the category achieved for the safety-related parts of the control system in compliance with
EN 954-1 (ISO 13849-1), using the design rationale provided by the designer. This International Standard does not give
complete validation requirements for programmable electronic systems and therefore can require the use of other standards.
50 pp.
ISO 13850:2015
1401115 Safety of machinery - Emergency stop function - Principles for design
This International Standard specifies functional requirements and design principles for the emergency
stop function on machinery, independent of the type of energy used.
ISO 13851:2002
Safety of machinery - Two-hand control devices - Functional aspects and design principles
This International Standard specifies the safety requirements of a two-hand control device and the dependency of the output
1400102 signal from the input signals. It describes the main characteristics of two-hand control devices for the achievement of safety
and sets out combinations of functional characteristics for three types. It provides requirements and guidance on the design
and selection of two-hand control devices including their assessment, the prevention of defeat and the avoidance of faults. It
also provides requirements and guidance for two-hand control devices containing a programmable electronic system. 23 pp.
ISO 13854:1996
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
1402496 The object of this International Standard is to enable the user (e.g. standard makers, designers of machinery) to avoid hazards
from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety
can be achieved by this method. 5 pp.
ISO 13855:2010
Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body
1400610 This International Standard establishes the positioning of safeguards with respect to the approach speeds of parts of the
19 speeds of parts of the human body and provides a
human body. It specifies parameters based on values for approach
methodology to determine the minimum distances to a hazard zone from the detection zone or from actuating devices of
PRODUCT
CODE STANDARD DESCRIPTION
safeguards. This second edition cancels and replaces the first edition (ISO 13855:2002), which has been technically revised.
48 pp.
ISO 13856-1:2013
Safety of machinery – Pressure-sensitive protective devise – Part 1: General principles for the design and testing of
pressure-sensitive mats and pressure-sensitive floors
1400213 This part of ISO 13856 establishes general principles and specifies requirements for the design and testing of pressure-
sensitive mats and pressure-sensitive floors normally actuated by the feet for use as devices for protecting persons from
hazardous machinery. The minimum safety requirements for the performance, marking and documentation are given. This
second edition cancels and replaces the first edition (ISO 13856-1:2001) which has been technically revised. 54 pp.
ISO 13856-2:2013
Safety of machinery – Pressure-sensitive protective devices – Part 2: General principles for the design and testing of
pressure-sensitive edges and pressure-sensitive bars
This part of ISO 13856 establishes general principles and specifies requirements for the design and testing of pressure-
1400313
sensitive edges and pressure-sensitive bars used as safeguards and not as actuating devices for normal operation. It is
applicable to pressure-sensitive edges and pressure-sensitive bars, with or without an external reset facility, used to detect
persons or body parts that can be exposed to hazards such as those caused by the moving parts of machines. This second
edition cancels and replaces the first edition (ISO 13856‑2:2005), which has been technically revised. 64 pp.
ISO 13857:2008
Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs
1400508 This International Standard establishes values for safety distances in both industrial and non-industrial environments to
prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also provides
information regarding distances to impede free access by lower limbs. (Replaces ISO 13852 and ISO 13853) 17 pp.
ISO 14118:2000
Safety of machinery - Prevention of unexpected start-up
1403297 This International Standard specifies built-in safety measures aimed at preventing unexpected machine start-up to allow safe
human interventions in hazard zones. 13 pp.
ISO 14119:2013
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
1400613
This International Standard specifies principles for the design and selection, independent of the nature of the energy source, of
interlocking devices associated with guards. It covers the parts of guards which actuate interlocking devices. 76 pp.
ISO 14120:2015
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
This International Standard specifies general requirements for the design, construction, and selection of guards provided to
protect persons from mechanical hazards. This International Standard indicates other hazards that can influence the design
1401615 and construction of guards. This International Standard applies to guards for machinery which will be manufactured after it is
published. The requirements are applicable if fixed and movable guards are used. This International Standard
does not cover interlocking devices. These are covered in ISO 14119. This International Standard does not provide requirements
for special systems relating specifically to mobility such as ROPS (rollover protective structures), FOPS (falling- object protective
structures), and TOPS (tip over protective structures) or to the ability of machinery to lift loads.
ISO 14122-1:2016
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general
requirements of access
This part of ISO 14122 gives general requirements for access to stationary machines and guidance about the correct choice of
means of access when necessary access to the stationary machine is not possible directly from the ground level or from a
floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered
adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. NOTE 1 “Fixed” means of access are
those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
1400816 This part of ISO 14122 specifies minimum requirements that also apply when the same means of access is required as the
part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on
condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are
outside the scope of the standard. It is intended that this part of ISO 14122 be used with a relevant access-specific part of
ISO 14122. The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of
access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially
designed to lift persons between two levels. This part of ISO 14122 is not applicable to machinery manufactured before the
date of its publication. For the significant hazards covered by this part of ISO 14122, see Clause 4.

20
PRODUCT
CODE STANDARD DESCRIPTION
ISO 14122-2:2016
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways
This part of ISO 14122 gives requirements for non-powered working platforms and walkways which are a part of a stationary
machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access.
NOTE 1 “Fixed” means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can
only be removed by the use of tools. This part of ISO 14122 specifies minimum requirements that also apply when the same
means of access is required as the part of the building or civil construction (e.g. working platforms, walkways) where the
1400916
machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the
machine. NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access
which are outside the scope of the standard. It is intended that this part of ISO 14122 be used with ISO 14122-1 to give the
requirements for walking platforms and walkways. The ISO 14122 series as a whole is applicable to both stationary and
mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts,
escalators, or other devices specially designed to lift persons between two levels. This part of ISO 14122 is not applicable to
machinery manufactured before the date of its publication.
ISO 14122-3:2016
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails
This part of ISO 14122 gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary
machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access.
NOTE 1 “Fixed” means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can
only be removed by the use of tools. This part of ISO 14122 specifies minimum requirements that also apply when the same
means of access is required as the part of the building or civil construction (e.g. stairs, stepladders, guard-rails) where the
1401016
machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the
machine. NOTE 2 Where no local regulation or standards exists, this part of ISO 14122 may be used also for means of
access which are outside the scope of the standard. It is intended that this part of ISO 14122 be used with ISO 14122-1 to
give the requirements for steps, stepladders and guard-rails. The ISO 14122 series as a whole is applicable to both stationary
and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as
lifts, escalators, or other devices specially designed to lift persons between two levels. This part of ISO 14122 is not
applicable to machinery manufactured before the date of its publication.
ISO 14122-4:2016
Safety of machinery —Permanent means of access to machinery — Part 4: Fixed ladders
This part of ISO 14122 gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered
adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems. NOTE 1 “Fixed” means of access are
those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
This part of ISO 14122 specifies minimum requirements that also apply when the same means of access is required as the
part of the building or civil construction (e.g. fixed ladders) where the machine is installed, on condition that the main function
1401116
of that part of the construction is to provide a means of access to the machine. NOTE 2 Where no local regulation or
standards exists, this part of ISO 14122 may be used also for means of access which are outside the scope of the standard. It
is intended that this part of ISO 14122 be used with ISO 14122-1 to give the requirements for fixed ladder systems.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are
necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift
persons between two levels. This part of ISO 14122 is not applicable to machinery manufactured before the date of its
publication.
ISO 14123-1:2015
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part
1: Principles and specifications for machinery manufacturers
1401315
This part of ISO 14123 establishes principles for the control of risks to health resulting from hazardous
substances emitted by machinery. This part of ISO 14123 is not applicable to substances that are a hazard to health solely
because of their explosive, flammable or radioactive properties or their behaviour at extremes of temperature or pressure.
ISO 14123-2:2015
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part
2: Methodology leading to verification procedures
1401715
This part of ISO 14123 establishes a methodology that leads to the selection of critical factors relating to emissions of
hazardous substances for the purpose of specifying suitable verification procedures. This part of ISO 14123 is intended to be
used in conjunction with ISO 14123‑1 and relates specifically to ISO 14123‑1:2015, Clause 8.
ISO 15534-1:2000
Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for
openings for whole-body access into machinery
This part of ISO 15534 specifies the dimensions of openings for whole-body access into machinery as defined in ISO/TR
1400700
12100-1. It provides the dimensions to which the values given in ISO 15534-3 are applicable. It has been prepared primarily
for non-mobile machinery; there may be additional specific requirements for mobile machinery. This part of ISO 15534 shows
how to combine the anthropometric data with suitable allowances to take these factors into account. Situations where people
are to be prevented from reaching a hazard are dealt with in ISO 13852. 12 pp.
ISO 15534-2:2000
Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access
openings
This part of ISO 15534 specifies the dimensions of openings for access into machinery as defined in ISO/TR 12100-1. It
1400800
provides the dimensions to which the values given in ISO 15534-3 are applicable. It has been prepared primarily for non-
mobile machinery; there may be additional specific requirements for mobile machinery. This part of ISO 15534 shows how to
21
combine the anthropometric data with suitable allowances to take these factors into account. Situations where people are to
be prevented from reaching a hazard are dealt with in ISO 13852. 23 pp.
PRODUCT
CODE STANDARD DESCRIPTION
ISO 15534-3:2000
Ergonomic design for the safety of machinery - Part 3: Anthropometric data
This part of ISO 15534 specifies current requirements for human body measurements (anthropometric data) that are required
1400900
by ISO 15534-1 and ISO 15534-2 for the calculation of access-opening dimensions as applied to machinery. The data are
based on information from anthropometric surveys representative of population groups within Europe comprising at least three
million people; both men and women. Measurements meet the requirements of ISO 15534-1 and ISO 15534-2. 4 pp.
ISO/TR 15847:2008
Graphic technology – Graphical symbols for printing press systems and finishing systems, including related auxiliary
equipment
1401008
This Technical Report defines graphical symbols for use on or near equipment in printing systems and finishing systems, including
related auxiliary equipment. These graphical symbols are intended for use on equipment controls, including pushbuttons,
touchscreens, keypads, etc.

IEC Standards
(These publications are also available from ISO/IEC member bodies)
IEC 60050-161:1990, Ed. 1.0 [formerly (IEC 50(161)]
1500190 International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility This standard contains terms
and definitions relating to electro-magnetic compatibility. English/French/Russian. 73 pp.
1500297 IEC 60050-161, Amd1, Ed 1.0 b: 1997 Update to IEC 60050-161:1990. English/French/Russian. 20 pp.
1500198 IEC 60050-161, Amd2, Ed 1.0 b: 1998 Second update to IEC 60050-161:1990. English/French/Russian. 20 pp.
1500287 IEC 60050-845:1987, Ed. 1.0 International Electrotechnical Vocabulary – Lighting
IEC 60079-0:2011, Ed. 6.0
Explosive atmospheres - Part 0: Equipment - General Requirements
1500711 This part of IEC 60079 specifies the general requirements for construction, testing and marking of electrical equipment and Ex
Components intended for use in explosive atmospheres. English/French. 210 pp.
IEC 60079-1:2007, Ed. 6.0
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
1501107 This part of IEC 60079 contains specific requirements for the construction and testing of electrical apparatus with the type of
protection flameproof enclosure "d", intended for use in explosive gas atmospheres. English/French. 147 pp. This package
includes a corrigendum. Available as a zip file.
IEC 60079-2 Ed. 5.0 b:2007
Electrical apparatus for explosive gas atmospheres - Part 2: Pressurized enclosures "p"
This part of IEC 60079 contains the specific requirements for the construction and testing of electrical apparatus with
1500207 pressurized enclosures, of type of protection “p”, intended for use in explosive gas atmospheres. It specifies requirements for
pressurized enclosures containing a limited release of a flammable substance. It supplements and modifies the general
requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the
requirements of this standard takes precedence. English/French. 111 pp.
IEC 60079-5, Ed. 3.0 b:2007
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
1500807 This part of IEC 60079 contains specific requirements for the construction, testing and marking of electrical equipment, parts
of electrical equipment and Ex components in the type of protection powder filling “q”, intended for use in explosive gas
atmospheres. Supplement to IEC 60079-0. English/French. 42 pp.
IEC 60079-6 Ed. 3.0 b:2007
Explosive atmospheres - Part 6: Equipment protection by oil immersion "o"
This part of IEC 60079 specifies the requirements for the construction and testing of oil-immersed electrical equipment, oil-
1500707 immersed parts of electrical equipment and Ex components in the type of protection oil immersion "o", intended for use in
explosive gas atmospheres. It is applicable to electrical apparatus and parts of electrical apparatus, which are not ignition
capable in normal operation. It is a supplement to IEC 60079-0. English/French. 31 pp.
IEC 60079-7:2006, Ed. 4.0
Explosive Atmospheres – Part 7: Equipment protection by increased safety "e"
1500311 This part of IEC 60079 specifies the requirements for the design, construction, testing and marking of electrical apparatus with
type of protection increased safety "e" intended for use in explosive gas atmospheres. English/French. 168 pp.
IEC 60079-10-1:2008, Ed. 1.0
Explosive atmospheres – Part 10-1: Classification of areas – Explosive gas atmospheres
1500111 This part of IEC 60079 is concerned with the classification of areas where flammable gas or vapour or mist hazards may arise
and may then be used as a basis to support the proper selection and installation of equipment for use in a hazardous area.
English/French 140 pp.
IEC 60079-10-2:2009, Ed. 1.0
Explosive atmospheres – Part 10-2: Classification of areas – Combustible dust atmospheres
1500211 This part of IEC 60079 is concerned with the identification and classification of areas where explosive dust atmospheres and
combustible dust layers are present, in order to permit the proper assessment of ignition sources in such areas. English/French
66 pp.

22
PRODUCT
CODE STANDARD DESCRIPTION
IEC 60079-11:2011, Ed. 6.0
Explosive atmospheres – Part 11: Equipment protection by intrinsic safety "i"
This part of IEC 60079 specifies the construction and testing of intrinsically safe apparatus intended for use in an explosive
1500811 atmosphere and for associated apparatus, which is intended for connection to intrinsically safe circuits which enter such
atmospheres. This type of protection is applicable to electrical equipment in which the electrical circuits themselves are
incapable of causing an explosion in the surrounding explosive atmospheres This package includes a corrigendum. Available
as a zip file.
IEC 60079-18:2009, Ed. 3.0
Explosive atmospheres -- Electrical apparatus for explosive gas atmospheres – Part 18: Equipment protection by
encapsulation "m"
1501209 This part of IEC 60079 gives the specific requirements for the construction, testing and marking of electrical equipment, parts
of electrical equipment and Ex components with the type of protection encapsulation "m" intended for use in explosive gas
atmospheres or explosive dust atmospheres. This package includes a corrigendum. Available as a zip file.
IEC 60204-1:2009, Ed. 5.1
Safety of machinery-Electrical equipment of machines - Part 1: General requirements
1500309 This part of IEC 60204 applies to the application of electrical and electronic and programmable electronic equipment and
systems to machines not portable by hand while working, including a group of machines working together in a coordinated
manner. English/French. 244 pp.
IEC 60529:2001, Ed. 2.1
Degrees of protection provided by enclosures (IP Code)
1500601
This standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated
voltage not exceeding 72,5 kV. This package includes 3 corrigendum. Available as a zip file. English/French. 100 pp.
IEC 60825-1:2007, Ed. 2.0
Safety of laser products - Part 1: Equipment classification and requirements
1500907
This standard applies to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. This
package includes a corrigendum. Available as a zip file. English/French. 195 pp.
IEC 60947-1:2011, Ed. 5.1b
Low-voltage switchgear and controlgear - Part 1: General rules
1500511 This standard applies, when required by the relevant product standard, to switchgear and controlgear and intended to be
connected to circuits, the rated voltage of which does not exceed
1 000 V a.c. or 1 500 V d.c. English/French. 516 pp.
IEC 60947-2:2009 Ed 4.1b
Low-voltage switchgear and controlgear – Part 2: Circuit-breakers
1500911 This standard revises IEC 60947-2 Ed. 4.0 b:2006. The main changes introduced in this edition are an amendment to the
verification of dielectric properties, the improvement of EMC clauses in Annexes B, F, J and M, and the addition of a new
Annex O regarding instantaneous trip circuit-breakers. English/French 462 pp.

IEC 60947-3:2012, Ed 3.1b

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-
1500512 combination units
This part of IEC 60947 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in
distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c. or 1 500 V d.c. 127 pp.
IEC 60947-4-1:2009, Ed. 3.0
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and
1501409 motor-starters
This part of IEC 60947 applies to the types of equipment listed in 1.1.1 and 1.1.2 whose main contacts are intended to be
connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. English/French. 250 pp.
IEC 60947-4-2:2011, Ed. 3.0
Low-voltage switchgear and controlgear – Part 4-2: Contractors and motor-starters – AC semiconductor motor
1500611 controllers and starters
This standard applies to a.c. semiconductor motor controllers and starters, which may include a series mechanical switching
device, inended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. 202 pp.
IEC 60947-5-1:2009, Ed. 3.1
Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements –
1501309 Electromechanical control circuit devices
This part of IEC 60947 applies to control circuit devices and switching elements intended for controlling, signaling, interlocking,
etc., of switchgear and controlgear. English/French 192 pp.
IEC 60947-5-2:2007, Ed. 3.0
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity
switches
1501507
This standard applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic
objects, ultrasonic proximity switches that sense the presence of sound reflecting objects and photoelectric proximity switches
that sense the presence of objects. English/French. 102 pp.
IEC 60947-5-4:2002, Ed. 2.0
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Methods of
1500402 assessing the performance of low-energy contacts - Special tests
This part of IEC 60947 applies to separable contacts used in the utilization area considered such as switching element for
control circuits. English/French. 49 pp. 23
PRODUCT
CODE STANDARD DESCRIPTION
IEC 60947-5-5:2005, Ed. 1.1
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical
1500305 emergency stop device with mechanical latching function
This part of IEC 60947-5 provides detailed specifications relating to the electrical and mechanical construction of emergency
stop devices with mechanical latching function and to their testing. English/French. 29 pp.
IEC 60947-6-1:2005, Ed. 2.0
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment- Transfer switching equipment
1500605 This standard applies to Automatic Transfer Switching Equipment (ATSE) to be used in emergency power systems with
interruption of the supply to the load during transfer, the rated voltage of which does not exceed 1,000 V a.c. or 1,500 V d.c. It
covers ATSE provided with or without an enclosure. English/French. 85 pp.
IEC 60947-6-2:2007, Ed. 2.1
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching
1501007 devices (or equipment) (CPS)
This part of IEC 60947-6 applies to control and protective switching devices (or equipment) (CPS), the main contacts of which
are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. English/French. 251 pp.
IEC 60947-7-1:2009, Ed. 3.0
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
1500809 This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screwless-type clamping units primarily
intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between
copper conductors. English/French. 72 pp.
IEC 60947-7-2:2009, Ed. 3.0
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for
copper conductors
1500909 This part of IEC 60947 specifies requirements for protective conductor terminal blocks with PE function up to 120 mm2 (250
kcmil) and for protective conductor terminal blocks with PEN function equal to and above 10 mm2 (AWG 8) with screw-type or
screwless-type clamping units, primarily intended for industrial applications. English/French. 42 pp.
IEC 61010-1:2010, Ed. 3.0
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General
requirements
1500310 This standard specifies general safety requirements for electrical equipment intended for professional, industrial process, and
educational use, which may incorporate computing devices: electrical test and measurement equipment; electrical industrial
process-control equipment; electrical laboratory equipment; or accessories intended for use with them, used under specified
environmental conditions. English/French. 326 pp. This package includes a corrigendum. Available as a zip file.
IEC 61131-1:2003, Ed. 2.0
Programmable controllers –Part 1: General information
1500703 This Part of IEC 61131 applies to programmable controllers (PLC) and their associated peri-pherals such as programming and
debugging tools (PADTs), human-machine interfaces (HMIs), etc., which have as their intended use the control and command
of machines and industrial processes. English/French. 24 pp.
IEC 61131-2:2007, Ed. 3.0
Programmable controllers –Part 2: Equipment requirements and tests
1500411 This Part of IEC 61131 specifies requirements and related tests for programmable controllers (PLC) and their associated
peripherals (for example., programming and debugging tools (PADTs), human-machine interfaces (HMIs, etc.) which have as
their intended use the control and command of machines and industrial processes. English/French. 126 pp.
IEC 61131-3:2013, Ed. 3.0
Programmable controllers – Part 3: Programming languages
1500208 This part of IEC 61131 specifies syntax and semantics of programming languages for programmable controllers as defined in
Part 1 of IEC 61131. 226 pp.
IEC/TR 61131-4:2004, Ed. 2.0
Programmable controllers – Part 4: User guidelines
1500504 The object of this Technical report is to introduce the end-users of Programmable Controller (PLC) to the IEC 61131 series,
and to assist the end-users in their selection and specification of their PLC equipment according to the IEC 61131 series. This
user guideline has as its main audience PLC end-users. English/French. 136 pp.
IEC 61131-5:2000, Ed. 1.0
Programmable controllers –Part 5: Communications
This part of IEC 61131 specifies communication aspects of a programmable controller. It specifies from the viewpoint of a PC
1500903 how any device can communicate with a PC as a server and how a PC can communicate with any device. In particular, it
specifies the behavior of the PC as it provides services on behalf of other devices and the services the PC application program
can request from other devices. English/French. 106 pp.

IEC 61131-7:2000, Ed. 1.0

Programmable controllers – Part 7: Fuzzy control programming
This part of IEC 61131 defines a language for the programming of Fuzzy Control applications. The object is to offer the
1500308 manufacturer and the user a well-defined common understanding of the basic means to integrate fuzzy control applications in
the Programmable Controller languages according to IEC 61131-3, as well as the ability to exchange portable fuzzy control
programs among different programming systems. English/French. 122 pp.

24
PRODUCT
CODE STANDARD DESCRIPTION PRICE
IEC/TR 61131-8:2003, Ed. 2.0
Programmable controllers – Part 8: Guidelines for the application and implementation of programming languages
1500408 This part of IEC 61131, which is a technical report, applies to the programming of programmable controller systems using the
programming languages defined in IEC 61131-3. It also provides guidelines for the implementation of these languages in
programmable controller systems and their programming support environments (PSEs). 112 pp.
IEC 61310-1:2007, Ed. 2.0
Safety of Machinery - Indication, Marking and Actuation - Part 1: Requirements for visual, auditory, and tactile signals
This part of IEC 61310 specifies requirements for visual, acoustic and tactile methods of indicating safety-related information,
1500407 at the human-machine interface and to exposed persons. It specifies a system of colours, safety signs, markings and other
warnings, intended for use in the indication of hazardous situations and health hazards and for meeting certain emergencies. It
also specifies ways of coding visual, acoustic and tactile signals for indicators and actuators to facilitate the safe use and
monitoring of the machinery. English/French. 43 pp.
IEC 61310-2 Ed. 2007, Ed. 2.0
Safety of Machinery - Indication, Marking and Actuation - Part 2: Requirements for marking
1500507 This part of IEC 61310 specifies requirements for the marking of machinery. It gives general rules on marking for identification
of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from
incorrect connections. English/French. 28 pp.
IEC 61310-3:2007, Ed. 2.0
Safety of Machinery - Indication, Marking and Actuation - Part 2: Requirements for the location and operation of
actuators
1500607 This part of IEC 61310 specifies safety-related requirements for actuators, operated by the hand or by other parts of the
human body, at the human-machine interface. It gives general requirements for the standard direction of movement for
actuators, the arrangement of an actuator in relation to other actuators, and the correlation between an action and its final
effects. English/French. 25 pp.
IEC/TR 61491:2010, Ed. 1.0
Electrical equipment of industrial machines – Serial data link for real-time communication between controls and
drives
1500110
This Technical Report presents an overview and guidance for IEC 61158, IEC 61784-1, IEC 61784-2 and IEC 61800-7 with
respect to a real-time serial interface between the control unit and its associated devices, which is utilized to transmit periodic
and non periodic data. English/French. 22 pp.
IEC 61496-1:2012, Ed. 3.0
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
This part of IEC 61496 specifies general requirements for the design; construction and testing of non-contact electro-sensitive
1500412 protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is
directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE
may include optional safety-related functions, the requirements for which are given in Annex A. English/French. 101 pp.
IEC 61496-2:2013, Ed. 3.0
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using
active opto-electronic protective devices (AOPDs)
1500106 This part of IEC 61496 specifies requirements for the design, construction and testing of electro-sensitive protective equipment
(ESPE) designed specifically to detect persons as part of safety-related system, employing active opto-electronic protective
devices (AOPDs) for the sensing function. English/French. 98 pp.
IEC 61508-3:2010, Ed. 2.0
Functional safety of electrical/ electronic/ programmable electronic safety-related systems - Part 3: Software
1500210 requirements
This part of IEC 61508 applies to any software forming part of a safety-related system or used to develop a safety-related
system. English/French. 236 pp.
IEC/TS 62046:2008, Ed. 2.0 b
Safety of machinery – Application of protective equipment to detect the presence of persons
1500609 This Technical Specification specifies requirements for the selection, positioning, configuration and commissioning, of protective
equipment to detect the presence of persons in order to protect those persons from dangerous part(s) of machinery in industrial
applications. English /French. 216 pp.
IEC 62061:2005, Ed. 1.0 b
Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control
systems
This International Standard specifies requirements and makes recommendations for the design, integration and validation of
1500805 safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines. It is applicable to
control systems used, either singly or in combination, to carry out safety-related control functions on machines that are not
portable by hand while working, including a group of machines working together in a coordinated manner. English/French.
This package includes 2 corrigenda. Available as a zip file.215 pp.

25
 C Các cập nhật từ 2018
▪ Expanded Gamut 4 Color
▪ Multi-Color Gamut 5 plus colors
▪ OBA Beta Data Sets with new aims
▪ Development of a new Profiling chart
▪ TR 19305 – Graphic Arts Workflows Processes with inputs and outputs / Stakeholders Responsibilities..
▪ ISO online Browsing Platform Search engine for all things related to ISO
▪ ISO 12641-2, Advanced Colour targets for input scanner calibration Publication being prepared
▪ ISO 17972-4, Spot colour characterisation data (CxF/X-4) Published Jan 2018
▪ ISO 20616 Graphic technology -- File format for quality control and metadata
▪ Part 1: Print requirements exchange (PRX) WD
▪ Part 2: Print quality exchange (PQX) DIS being drafted
• ISO 15930-9 Graphic technology — Prepress digital data exchange using PDF — Part 9: Complete
exchange of printing data (PDF/X-6) and partial exchange of printing data with external profile reference
(PDF/X- 6p and PDF/X-6n) using PDF 2.0 Approaching end of work period, canceled, now out for ballot as
a new CD
• ISO 19593-1 Graphic technology — Use of PDF to associate processing steps and content data Published:
April 2018
• PDF/X Application Notes Continued work item
▪ ISO 16612-3, Graphic technology – Variable data exchange – Part 3: Using PDF/X-6 (PDF/VT-3) CD
▪ ISO 16684-1 Graphic technology -- Extensible metadata platform (XMP) -- Part 1: Data model,
serialization and core properties DIS approved ROC Dec. 11
▪ ISO 21812-1 Graphic technology -- Digital data exchange – Print product metadata for PDF files -- Part
1: Architecture and core requirements for metadata DIS approved 11/2018
• Graphic technology -- Process control for the production of half-tone colour separations, proof and
production prints
• ISO/NP 12647-2 Graphic Technology - Offset Lithographic process Revision proposed
• ISO 12647-6 Graphic Technology - Flexographic printing CD
• ISO 12647-8, Graphic Technology - Validation print processes working directly from digital data
Revision started
• ISO 12647-9, Graphic Technology - Metal decoration printing processes CD
• ISO/TR 23031 Graphic technology -- Assessment and validation of the performance of spectrocolorimeters
and spectrodensitometers DTR
• ISO/TR 23805 Graphic technology -- Dry back calculation for offset printing process CD requirements for
printed matter — Part 1: Measurement methods and reporting schema Publication being prepared
• ISO/TS 15311-2:2018 Graphic technology — Print quality requirements for printed matter — Part 2:
Commercial print applications utilizing digital printing technologies Published Oct 2018
• The curious case of ISO TS 10128 and ISO PAS 15339-1 and 2

26
 • Both reconfirmed in their respective forms though both have “aged out” of their status
• US voted to revise 10128 and confirm 15339
• ISO/WD 2834-1 Graphic technology -- Laboratory preparation of test prints -- Part 1: Paste inks CD
• ISO/CD 2836 Graphic technology -- Prints and printing inks -- Assessment of resistance of prints to various
agents CD
• ISO/DTR 22909-1 Graphic technology – Preparation of decorative laminate samples for appearance
assessment — Part 1: General
• ISO 22909-2 Graphic technology – Preparation of decorative laminate samples for appearance
assessment — Part 2: Liquid resin process 22909 split into two documents one a TR the other an IS
• ISO 22934 Graphic technology -- Communication of paste ink properties WD/CD
• ISO 23498 Graphic technology -- Visual opacity of white ink NWI
• ISO 23395 Graphic technology - Method and device for testing the ink or varnish adhesion on a substrate
CD
ISO 12643 series, Graphic technology — Safety requirements for graphic technology equipment and
systems
• Part 1: General requirements DIS
• Part 2: Prepress and press equipment and systems DIS
• Part 3: Binding and finishing equipment and systems CD
• Part 4: Converting equipment and systems CD
• Part 5: Manually-fed stand-alone platen presses NWI
• ISO 14298:2013 Graphic technology - Management of security printing processes Expect to start a revision
next year
• ISO 21632: 2018 Graphic technology — Determination of the energy consumption of digital printing devices
including transitional and related modes Published Dec 2018
• ISO 20294: 2018 Graphic technology — Quantification and communication for calculating the carbon
footprint of e media Published Nov 2018
• ISO 16759:2013 Graphic technology -- Quantification and communication for calculating the carbon
footprint of print media products Reconfirmed
• ISO 22067-1 Graphic technology - Environmental statement criteria and parameters for printed products -
- Part 1: Printing of packaging NWI/WD
ISO 19301 Graphic technology -- Guidelines for schema writers -- Template for colour quality management
DIS approved ROC begun
• ISO 19302: 2018 Graphic technology — Colour conformity of printing workflows Published Dec 2018
• ISO/TR 19303-1 Graphic Technology – Guidelines for Schema Writers – Part 1: Packaging printing
Preparation for Publishing
WG 7
• ISO/TS 21830 Graphic technology – BPC for n-colour profiles Published Sept 2018
• ISO 20677 Image technology colour management — Extensions to architecture, profile format, and data
structure Approved FDIS Nov 2018, preparing to publish

27
• ISO/NP 23564: Image technology colour management -- Evaluating colour transform accuracy in ICC
profile NWI
• ISO TS 23534-1 Image technology colour management -- Interoperability conformance specification:
Architecture for process colour plus spot colour overprint simulation – Part 1: Colorimetric processing CD
• ISO/TS 18621-11 Model for computing and analysing Colour Gamut project approved moved to DTS ballot
after Tokyo
• SO/TS 18621-31 Evaluation of the perceived resolution of printing systems with the contrast - resolution
chart DIS ballot approved but moved to 2nd DIS
• ISO 20294 Graphic technology -- Quantification and communication for calculating the carbon footprint of
e-media (DIS)
• Additional work: categorize e-media, collect info on carbon footprint of enewspaper

28