HCD-EC69i/EC79i/EC99i

SERVICE MANUAL US Model

Canadian Model
Ver. 1.1 2009.05
UK Model
Australian Model

• HCD-EC69i is the amplifier, CD player, tuner

and iPod section in MHC-EC69i.
• HCD-EC79i is the amplifier, CD player, tuner
and iPod section in MHC-EC79i.
• HCD-EC99i is the amplifier, CD player, tuner
and iPod section in MHC-EC99i. Photo: HCD-EC69i

 iPod is a trademark of Apple Inc., registered in the U.S.

and other countries. Model Name Using Similar Mechanism CDM76A-K6BD90-WOD NEW
 MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson. Mechanism Type EC79i: UK, Australian/EC99i CDM76A-K6BD90-WOD
 All other trademarks and registered trademarks are of
their respective holders. In this manual, TM and marks ® EC69i/EC79i: US, Canadian BU-K8BD90-WOD
are not specified. Base Unit Name
EC79i: UK, Australian/EC99i BU-K6BD90-WOD
EC69i/EC79i: US, Canadian KSM-213CDP
Optical Pick-up Block Name
EC79i: UK, Australian/EC99i KSM-213DCP

SPECIFICATIONS
Main unit CD player section iPod section General
AUDIO POWER SPECIFICATIONS System: Compact disc and digital audio system Compatible iPod models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: Laser Diode Properties Power requirements:
(HCD-EC99i, HCD-EC79i The United States model only) Emission Duration: Continuous North American model: AC 120 V, 60 Hz
Low channel Laser Output*: Less than 44.6μW Australian model: AC 230  240 V, 50/60 Hz
With 8 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 60 watts * This output is the value measurement at a distance of 200mm from the UK model: AC 230 V, 50/60 Hz
per channel minimum RMS power, with no more than 0.7% total harmonic objective lens surface on the Optical Pick-up Block with 7mm aperture. Power consumption:
distortion from 250 milliwatts to rated output. Frequency response: 20 Hz  20 kHz
High channel Signal-to-noise ratio: More than 90 dB HCD-EC99i
Dynamic range: More than 88 dB 250 W
With 8 ohm loads, both channels driven, from 2,000 – 13,000 Hz; rated
(0.5 W at the Power Saving Mode)
60 watts per channel minimum RMS power, with no more than 0.7% total Tuner section
harmonic distortion from 250 milliwatts to rated output. FM stereo, FM/AM superheterodyne tuner HCD-EC79i
iPod nano 4th 200 W
AUDIO POWER SPECIFICATIONS Antenna:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: FM lead antenna iPod touch 2nd generation iPod touch 1st (0.5 W at the Power Saving Mode)
(HCD-EC69i The United States model only) AM loop antenna generation (video) generation HCD-EC69i
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; 30 watts FM tuner section: 80 W
per channel minimum RMS power, with no more than 0.7% total harmonic Tuning range (0.5 W at the Power Saving Mode)
distortion from 250 milliwatts to rated output. North American model: 87.5  108.0 MHz (100 kHz step) Dimensions (w/h/d) (excl. speakers):
Amplifier section Other models: 87.5  108.0 MHz (50 kHz step)
Intermediate frequency: 10.7 MHz HCD-EC99i
HCD-EC99i Approx. 200 × 311 × 375 mm
Front Speaker AM tuner section:
RMS output power (reference): Tuning range iPod nano 3rd HCD-EC79i (Australian and UK models only)
North American model: Approx. 200 × 311 × 375 mm
Low channel generation iPod nano 2nd
530  1,710 kHz (with 10 kHz tuning interval) iPod classic HCD-EC79i (North American model only)
95 W + 95 W (per channel at 8 Ω, 1 kHz, 10% THD)
531  1,710 kHz (with 9 kHz tuning interval) (video) generation Approx. 200 × 306 × 375 mm
High channel
Australian model:
95 W + 95 W (per channel at 8 Ω, 8 kHz, 10% THD)
531  1,710 kHz (with 9 kHz tuning interval)
(aluminum) HCD-EC69i
Subwoofer 530  1,710 kHz (with 10 kHz tuning interval) Approx. 200 × 306 × 305 mm
RMS output power (reference): UK model: Mass (excl. speakers):
150 W (at 4 Ω, 80 Hz, 10% THD) 531  1,602 kHz (with 9 kHz tuning interval)
Intermediate frequency: 450 kHz HCD-EC99i
HCD-EC79i Approx. 6.2 kg
RMS output power (reference):
Low channel HCD-EC79i (Australian and UK models only)
95 W + 95 W (per channel at 8 Ω, 1 kHz, 10% THD) Approx. 6.0 kg
High channel HCD-EC79i (North American model only)
95 W + 95 W (per channel at 8 Ω, 8 kHz, 10% THD) iPod nano 1st
Approx. 5.7 kg
iPod 5th generation iPod 4th
HCD-EC69i HCD-EC69i
RMS output power (reference): generation generation
Approx. 3.8 kg
50 W + 50 W (per channel at 6 Ω, 1 kHz, 10% THD) (video) (color display)
Design and specifications are subject to change without notice.
Inputs (except for HCD-EC69i)
PC IN (stereo mini jack): Sensitivity 800 mV, impedance 22 kilohms
Outputs
PHONES (stereo mini jack): Accepts headphones with an impedance of 8 Ω
or more
SPEAKER: impedance
HCD-EC99i/EC79i: 8 Ω
HCD-EC69i: 6 Ω
SUBWOOFER OUT (HCD-EC99i only): impedance 4 Ω iPod mini
iPod 4th
generation

COMPACT DISC RECEIVER

9-889-427-02 Sony Corporation
2009E05-1 Audio&Video Business Group
© 2009.05 Published by Sony Techno Create Corporation
HCD-EC69i/EC79i/EC99i

NOTES ON CHIP COMPONENT REPLACEMENT SAFETY CHECK-OUT

• Never reuse a disconnected chip component. After correcting the original service problem, perform the follow-
• Notice that the minus side of a tantalum capacitor may be dam- ing safety check before releasing the set to the customer:
aged by heat. Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
FLEXIBLE CIRCUIT BOARD REPAIRING Check leakage as described below.
• Keep the temperature of soldering iron around 270 °C during
repairing. LEAKAGE TEST
• Do not touch the soldering iron on the same conductor of the The AC leakage from any exposed metal part to earth ground and
circuit board (within 3 times). from all exposed metal parts to any exposed metal part having a
• Be careful not to apply force on the conductor when soldering return to chassis, must not exceed 0.5 mA (500 microamperes.).
or unsoldering. Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
CAUTION
Use of controls or adjustments or performance of procedures
WT-540A. Follow the manufacturers’ instructions to use these
other than those specified herein may result in hazardous radia- instruments.
tion exposure. 2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
This appliance is classified as VOM or battery-operated AC voltmeter. The “limit” indication
a CLASS 1 LASER product.
is 0.75 V, so analog meters must have an accurate low-voltage
This marking is located on the
rear exterior. scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)

To Exposed Metal
Parts on Set

AC
0.15 μF 1.5 kΩ voltmeter
(0.75 V)

Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.

SAFETY-RELATED COMPONENT WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE

WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR

LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.

2
 HCD-EC69i/EC79i/EC99i

TABLE OF CONTENTS

1. SERVICING NOTES ............................................. 4 6. DIAGRAMS

6-1. Block Diagram - CD, TUNER Section - ........................ 24
2. GENERAL .................................................................. 7 6-2. Block Diagram - MAIN Section -................................... 25
6-3. Block Diagram
3. DISASSEMBLY - PANEL, POWER SUPPLY Section - ........................... 26
3-1. Disassembly Flow ........................................................... 9 6-4. Printed Wiring Board - CD Board - ................................ 28
3-2. Side Panel (L)/(R) 6-5. Schematic Diagram - CD Board - ................................... 29
(HCD-EC69i/EC79i: US, Canadian) .............................. 10 6-6. Schematic Diagram - MAIN Board (1/2) - ..................... 30
3-3. Top Panel Block 6-7. Schematic Diagram - MAIN Board (2/2) - ..................... 31
(HCD-EC69i/EC79i: US, Canadian) .............................. 10 6-8. Printed Wiring Board - MAIN Board - ........................... 32
3-4. Ornament Plate (Dock) or iPod Assy .............................. 11 6-9. Printed Wiring Boards - AMP Section -.......................... 33
3-5. Base (Dock) .................................................................... 12 6-10. Schematic Diagram - 2CH-4CH AMP Board -............... 34
3-6. MAIN Board ................................................................... 12 6-11. Schematic Diagram - 3CH AMP Board (EC99i) -.......... 35
3-7. Front Panel Block 6-12. Printed Wiring Boards - PANEL Section - ..................... 36
(HCD-EC69i/EC79i: US, Canadian) .............................. 13 6-13. Schematic Diagram - PANEL Section - .......................... 37
3-8. Base Unit Block (BU-K8BD90-WOD) 6-14. Printed Wiring Boards - AUDIO IN/OUT, KEY,
(HCD-EC69i/EC79i: US, Canadian) .............................. 13 POWER SUPPLY Section - ............................................ 38
3-9. Optical Pick-Up Block (KSM-213CDP) 6-15. Schematic Diagram - AUDIO IN/OUT, KEY,
(HCD-EC69i/EC79i: US, Canadian) .............................. 14 POWER SUPPLY Section - ............................................ 39
3-10. Side Panel (L)/(R)
(HCD-EC79i: UK, Australian/EC99i) ............................ 14 7. EXPLODED VIEWS
3-11. Top Panel Block 7-1. Overall Section (HCD-EC69i) ........................................ 46
(HCD-EC79i: UK, Australian/EC99i) ............................ 15 7-2. Overall Section (HCD-EC79i/EC99i) ............................ 47
3-12. CD Mechanism Deck (CDM76A-K6BD90-WOD) 7-3. Top Panel Section (HCD-EC69i/EC79i: US, CND) ....... 48
(HCD-EC79i: UK, Australian/EC99i) ............................ 15 7-4. Top Panel Section (HCD-EC79i: UK, AUS/EC99i) ....... 49
3-13 MAIN Board (HCD-EC79i: UK, Australian/EC99i) ...... 16 7-5. Front Panel Section ......................................................... 50
3-14. Front Panel Block 7-6. iPod Dock Section .......................................................... 51
(HCD-EC79i: UK, Australian/EC99i) ............................ 16 7-7. MAIN Board, Chassis Section (HCD-EC69i) ................ 52
3-15. Base Unit (BU-K6BD90-WOD) 7-8. MAIN Board Section (HCD-EC79i/EC99i) ................... 53
(HCD-EC79i: UK, Australian/EC99i) ............................ 17 7-9. Chassis Section (HCD-EC79i/EC99i) ............................ 54
3-16. Optical Pick-Up Block (KSM-213DCP)
(HCD-EC79i: UK, Australian/EC99i) ............................ 17 8. ELECTRICAL PARTS LIST .............................. 55
3-17. Belt (CDM76) (HCD-EC79i: UK, Australian/EC99i) .... 18
Accessories are given in the last of the electrical parts list.
4. TEST MODE ............................................................ 19

5. ELECTRICAL ADJUSTMENTS ........................ 23

3
HCD-EC69i/EC79i/EC99i
Ver. 1.1 SECTION 1
SERVICING NOTES
MODEL IDENTIFICATION
NOTES ON HANDLING THE OPTICAL PICK-UP
- Back Panel -
BLOCK OR BASE UNIT

The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by
Power
the charged electrostatic load, etc. on clothing and the human body. Voltage
During repair, pay attention to electrostatic break-down and also Indication
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.

NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pickup block. Therefore, when checking the laser diode emission, Model Power Voltage Indication
observe from more than 30 cm away from the objective lens. EC69i: US and Canadian model 120V - 60Hz 80W
EC69i: UK model 230V - 50/60Hz 80W
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead- EC69i: Australian model 230–240V - 50/60Hz 80W
free mark (LF) indicating the solder contains no lead. EC79i: US and Canadian model 120V - 60Hz 200W
(Caution: Some printed circuit boards may not come printed with EC79i: UK model 230V - 50/60Hz 200W
the lead free mark due to their particular size)
EC79i: Australian model 230–240V - 50/60Hz 200W

: LEAD FREE MARK EC99i: US and Canadian model 120V - 60Hz 250W
Unleaded solder has the following characteristics. EC99i: UK model 230V - 50/60Hz 250W
• Unleaded solder melts at a temperature about 40 °C higher EC99i: Australian model 230–240V - 50/60Hz 250W
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be LASER DIODE AND FOCUS SEARCH OPERATION
applied to the solder joint for a slightly longer time. CHECK (EC69i/EC79i: US, Canadian models)
Soldering irons using a temperature regulator should be set to During normal operation of the equipment, emission of the laser
about 350 °C. diode is prohibited unless the upper lid is closed while turning on
Caution: The printed pattern (copper foil) may peel away if the SW351. (push switch type)
the heated tip is applied for too long, so be careful! The following checking method for the laser diode is operable.
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) • Method
than ordinary solder so use caution not to let solder bridges Emission of the laser diode is visually checked.
occur such as on IC pins, etc. 1. Open the upper lid.
• Usable with ordinary solder 2. Push the SW351 as shown in Fig.1.
It is best to use only unleaded solder but unleaded solder may Note: Do not push the detection lever strongly, or it may be bent or
also be added to ordinary solder. damaged.
3. Check the object lens for confirming normal emission of the
RELEASING THE DISC TRAY LOCK laser diode. If not emitting, there is a trouble in the automatic
(EC79i: UK, Australian/EC99i) power control circuit or the optical pick-up.
The disc tray lock function for the antitheft of an demonstration In this operation, the object lens will move up and down 2
disc in the store is equipped. times along with inward motion for the focus search.

Releasing Procedure:
1. Press [?/1] button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. While pressing the [x] button, press the [Z] button for more 5
seconds).
4. The message “UNLOCKED” is displayed and the disc tray is
unlocked.

Note: When “LOCKED” is displayed, the slot lock is not released by turn- SW351
ing power on/off with the [?/1] button.

NOTE OF REPLACING THE LOADING BOARD

(EC79i: UK, Australian/EC99i)
When the LOADING board is damaged, exchange the entire
CDM76A Assy.

Fig. 1. Method to push the SW351

4
 HCD-EC69i/EC79i/EC99i

HOW TO REMOVE THE KNOB (VOL)

 knob (VOL)

front panel block

(back view)

hole
 Push the knob (VOL) by flat-head screwdriver.

CAPACITOR DISCHARGE FOR ELECTRIC SHOCK PREVENTION

Note: Please take out the top panel block and side panel (L/R) from a set refer to DISASSEMBLY (from Page 10).

In checking the MAIN board, make a capacitor discharge

MAIN board
of C622 and C626 for electric shock prevention.

800 :/2 W

C626

C622

MAIN board

800 :/2 W

5
HCD-EC69i/EC79i/EC99i

HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF

(HCD-EC79i: UK, Australian/EC99i only)

Note: Please take out the top panel block from a set refer to DISASSEMBLY (from Page 15).

top panel block

bracket

Push hard the bracket by

the flat-head screwdriver. flat-head screwdriver
bracket

– top panel block (front view) –

6
 HCD-EC69i/EC79i/EC99i
SECTION 2 This section is extracted
GENERAL from instruction manual.

HCD-EC79i (North American model only) Remote This manual mainly explains operations using the
HCD-EC99i remote, but the same operations can also be performed
HCD-EC79i (Australian and UK models only) HCD-EC69i
using the buttons on the unit having the same or similar
names.

To use the remote

Slide and remove the battery compartment lid, and
insert the two R6 (size AA) batteries (supplied, except
for HCD-EC69i),  side first, matching the polarities
* shown below.

Notes on using the remote

With normal use, the batteries should last for about six months.
* Do not mix an old battery with a new one or mix different types of
batteries.
*
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
Batteries installed devices shall not be exposed to excessive heat such
* HCD-EC79i only as sunshine, fire or the like.
* HCD-EC99i only

Getting Started

HCD-EC69i only  Antennas To use the iPod

Find a location and an orientation that provide good Make sure the iPod indicator  lights up (except for
reception, and then set up the antenna. HCD-EC69i).
Keep the antennas away from the speaker cords and the Press PUSH  on the unit to flip-open the iPod Dock,
power cord to avoid picking up noise. slide the LOCK lever to the HOLD position, and insert
an iPod Dock Adapter into the Dock before use.
 Subwoofer (HCD-EC99i only) For details on the iPod Dock Adapters, refer to the
instructions supplied with the Dock Adapters.
Insert only the stripped portion of the cord.
Place the subwoofer vertically to obtain a better bass iPod Dock Adapter
reproduction. Also, position the subwoofer: To remove the iPod
Dock Adapter, pull it
 on a solid floor where resonance is unlikely to occur.
up with your fingernail
 at least a few centimeters away from the wall. or a flat object using
 away from the center of the room or place a the slot inside the
bookshelf against a wall, to avoid generating a adapter.
standing wave.
LOCK lever
iPod Connector
 Speakers Notes
Insert only the stripped portion of the cord. The iPod Dock Adapter is not supplied with the system.
 You can use the iPod only when the iPod indicator  lights up
 Power (except for HCD-EC69i).

Connect the power cord to a wall outlet.

If the plug does not fit the wall outlet, detach the supplied To adjust the volume
plug adaptor (only for models equipped with an adaptor). Press VOLUME +/ (or turn the VOLUME control on
the unit) .

To attach the speaker pads To connect an optional headphones

Attach the supplied speaker pads to the bottom of the Connect headphones to the PHONES jack  on the
front speakers and subwoofer to prevent slipping. unit.

To set the clock

Use buttons on the remote to set the clock.
1 Press  (on/standby)  to turn on the system.
2 Press TIMER MENU  to select the clock set mode.
* HCD-EC99i only If “PLAY SET” flashes, press /  repeatedly to
select “CLOCK,” and then press (enter) .
Front speakers: Subwoofer:
4 pads for each speaker 4 pads (HCD-EC99i only) 3 Press /  repeatedly to set the hour, and then
press .
 FM lead antenna (Extend it horizontally.)  To subwoofer
 AM loop antenna  Solid (Blue/) 4 Use the same procedure to set the minutes.
 To right speaker (High freq.)  Solid (Black/) Note
 To right speaker (Low freq.)  To left speaker (High freq.) The clock settings are lost when you disconnect the power cord or if a
 To wall outlet  Solid (Red/) power failure occurs.
 Solid (Gray/)  Solid (Black/)
 Solid (Black/)  To left speaker (Low freq.) To display the clock when the system is off
Press DISPLAY . The clock is displayed for about
8 seconds.

Operations
To Press The system can only play MP3 files that have a file extension of Tip
To reduce static noise on a weak FM stereo station, press FM MODE
Playing a CD/MP3 disc Pause playback  (pause) (or  (play/pause)
“.mp3”.
Even when file name has the “.mp3” file extension, if the actual  repeatedly until “MONO” appears to turn off stereo reception.
on the unit) . To resume play, file differs, playing this file may generate a loud noise which could
1 Select the CD function. press the button again. damage the speaker system and the system may malfunction.
Press FUNCTION +/  repeatedly (or CD  on The maximum number of:
Presetting radio stations
Stop playback  (stop) . folders is 150 (including the root folder). Use buttons on the remote to preset stations.
the unit).
Select a folder on an MP3 files is 255.
2 Place a disc. (select folder) + / . 1 Tune in the desired station.
MP3 disc MP3 files and folders that can be contained on a single disc is 300.
folder levels (the tree structure of files) is 8. 2 Press TUNER MEMORY  to select the tuner
HCD-EC99i Select a track or file (go back) / (go Compatibility with all MP3 encoding/writing software, recording memory mode.
HCD-EC79i (Australian and UK models only) forward) . device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play Preset number
Press  (open/close)  on the unit, and place a disc Find a point in a Hold down  (rewind) / at all.
with the label side up on the disc tray. track or file (fast forward)  during playback,
and release the button at the Notes on playing multisession discs
To close the disc tray, press   on the unit. If the disc begins with a CD-DA (or MP3) session, it is recognized
Do not force the disc tray closed with your finger, as desired point. as a CD-DA (or MP3) disc, and playback continues until another
this may damage the unit. Select Repeat Play REPEAT  repeatedly until session is encountered.
“REP” or “REP1” appears. A disc with a mixed CD format is recognized as a CD-DA disc. 3 Press + /  repeatedly to select the desired
preset number.
To change the play mode If another station is already assigned to the selected
preset number, the station is replaced by the new
Press PLAY MODE  repeatedly while the player is Listening to the radio stations.
stopped. You can select normal play (“ ” for all MP3
files in the folder on the disc), shuffle play (“SHUF” 1 Select “TUNER FM” or “TUNER AM.” 4 Press  to store the station.
or “ SHUF*” for folder shuffle), or program play Press FUNCTION +/ (or FUNCTION on the unit)
 (open/close) 5 Repeat steps 1 through 4 to store other stations.
(“PGM”).  repeatedly.
* When playing a CD-DA (audio) disc, (SHUF) Play performs the You can preset up to 20 FM and 10 AM stations. The
same operation as normal (SHUF) Play. 2 Perform tuning. preset stations are retained for about half a day even
HCD-EC79i (North American model only) if you disconnect the power cord or if a power failure
Note on the CD compartment (HCD-EC79i (North American For automatic scanning
HCD-EC69i model only) and HCD-EC69i) occurs.
Press  PUSH OPEN/CLOSE  on the unit, Do not open the CD compartment when “READING” appears or Press TUNING MODE  repeatedly until “AUTO”
during playback, as this may cause a malfunction. appears, and then press + /  (or TUNING + 6 To call up a preset radio station, press TUNING
and place a disc with the label side up on the CD MODE  repeatedly until “PRESET” appears, and
compartment. /  on the unit). Scanning stops automatically
Notes on Repeat Play then press + /  repeatedly to select the
To close the CD compartment, press  PUSH OPEN/ All tracks or files on a disc are played repeatedly up to five times. when a station is tuned in, and “TUNED” and “ST” desired preset number.
CLOSE  on the unit. “REP1” indicates that a single track or file is repeated until you stop (for stereo programs only) appear.
 PUSH OPEN/CLOSE it.

Note on shuffle play mode

When you turn off the system, the selected shuffle play mode (“SHUF”
or “ SHUF”) is cleared and the play mode returns to normal play
mode (“ ”).

Notes on playing MP3 discs If “TUNED” does not appear and the scanning does
Do not save other types of tracks or files or unnecessary folders on a not stop, press   to stop scanning, then perform
disc that has MP3 files. manual tuning (below).
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that they are recorded onto For manual tuning
3 Start playback. the disc.
Press TUNING MODE  repeatedly until
Press  (play) (or  (play/pause) on the unit) “MANUAL” appears, and then press + /  (or
. TUNING + /  on the unit) repeatedly to tune
in the desired station.

7
HCD-EC69i/EC79i/EC99i

4 Program the selected track or file.

Playing the iPod Press  to enter the selected track or file. Using the timers
1 Select the iPod function. 5 Repeat steps 3 through 4 to program additional The system offers two timer functions. If you use both
tracks or files, up to a total of 25 tracks or files. timers, the Sleep Timer has priority.
Press FUNCTION +/  repeatedly (or iPod  on Use buttons on the remote to use the timer functions.
the unit). 6 To play your program of tracks or files, press  .
2 Place the iPod. The program remains available until you open the disc Sleep Timer:
tray or CD compartment (HCD-EC69i only). To play You can fall asleep to music. This function works even if
the same program again, select the CD function, and the clock is not set.
then press  . Press SLEEP  repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops
To cancel Program Play or in 100 minutes.
Press PLAY MODE  repeatedly until “PGM”
disappears while the player is stopped. Play Timer:
You can wake up to CD, tuner or iPod at a preset time.
To delete the last track or file of the program Make sure you have set the clock.
Press CLEAR  while the player is stopped.
1 Prepare the sound source.
To view program information, such as total Prepare the sound source, and then press VOLUME
3 Start playback.
track number of the program +/  to adjust the volume.
Press  (or  on the unit) . Press DISPLAY  repeatedly. To start from a specific CD track or audio file, create
To control the iPod your own program.
You can control your iPod with the following buttons on 2 Select the timer set mode.
the remote or unit. Using optional audio components Press TIMER MENU .
To Press (except for HCD-EC69i) 3 Set the play timer.
Pause playback  (pause) (or  (play/pause) Press /  repeatedly to select “PLAY SET,” and
on the unit)  or  (stop) . 1 Prepare the sound source. then press .
Scroll up/down the / . You can scroll up or Connect additional audio component to the PC IN “ON TIME” appears, and the hour indication flashes.
iPod menus down the iPod menus much like jack  on the unit using an audio analog cord (not
the Click Wheel operations of supplied). 4 Set the time to start playback.
the iPod or the drag up-or-down Press /  repeatedly to set the hour, and then
2 Turn down the volume. press . The minute indication flashes. Use the
operations of the iPod touch.
Press VOLUME  (or turn the VOLUME control on procedure above to set the minutes.
Select a track (go back) / (go the unit) .
or chapter of forward) . To fast-forward “OFF TIME” appears and the hour indication flashes
audiobook/podcast or fast-rewind, hold down the 3 Select the PC function. in the display.
button. Press FUNCTION +/ (or FUNCTION on the unit) 5 Use the same procedure as in step 4 to set the time
 repeatedly. to stop playback.
Choose the selected  / (enter) . You can
item choose the selected item much 4 Start playback. 6 Select the sound source.
like the center button on the iPod Start playback of the connected component. Press /  repeatedly until the desired sound
or the touch operation of the source appears, and then press . The display
iPod touch.
5 Adjust the volume.
shows the timer settings.
Find a point in a Hold down  (rewind) Press VOLUME +/ (or turn the VOLUME control
track or chapter of / (fast forward)  during on the unit) . 7 Turn off the system.
audiobook/podcast playback, and release the button Press  .
at the desired point. The system turns on 15 seconds before the preset time.
 /TOOL MENU / If the system is on at the preset time, the Play Timer
Return to the Adjusting the sound will not play.
previous menu or (return) . You can return to the
select a menu previous menu or select a menu To Press Do not operate the system from the time the system
much like the Menu button on Generate a more dynamic DSGX  on the unit. turns on until the play starts.
the iPod or the touch operation sound (Dynamic Sound
of the iPod touch. To check the setting
Generator X-tra)
Set the sound effect EQ .
1 Press TIMER MENU .
To use the system as a battery charger “SELECT” flashes in the display.
You can use the system as a battery charger for the iPod 2 Press .
To turn on the subwoofer (HCD-EC99i only)
when the system is on.
Press SUBWOOFER ON/OFF  on the unit until 3 Press /  repeatedly to select “PLAY SEL,” and
The charging begins when the iPod is placed on the
“SUBWOOFER” appears. The volume of the subwoofer is then press .
iPod connector. The charging status appears in the iPod
linked to the front speakers.
display. For details, see the user’s guide of your iPod.
To cancel the timer
To stop charging the iPod Repeat the same procedure as above until “OFF” appears
Remove the iPod. in step 3, and then press .
Changing the display
Notes To change the setting
When placing or removing the iPod, handle the iPod in the same To Press Start over from step 1.
angle as that of the iPod connector on the unit and do not twist or
sway the iPod to prevent connector damage. Change DISPLAY  repeatedly when the Notes for the iPod user
Do not carry the unit with an iPod set on the connector. Doing so information on the system is turned on.  Make sure the iPod is not playing when using the Play Timer.
may cause a malfunction. display*  The Play Timer may not be activated depending on the status of the
When placing or removing the iPod, brace the unit with one hand connected iPod.
and take care not to press the controls of the iPod by mistake. Change Display DISPLAY  repeatedly when the
Before disconnecting the iPod, pause playback. mode (See below.) system is turned off. Tip
While playing video, you cannot use  / . You can fast The Play Timer setting remains as long as the setting is not cancelled
* For example, you can view CD/MP3 disc information, such as;
rewind (fast forward) by holding down  / . manually.
track or file number during normal play.
To change the volume level, use VOLUME +/ (or VOLUME
control on the unit) . The volume level does not change even if track or file name (“ ”) during normal play.
adjusted on the iPod. artist name (“ ”) during normal play.
This system is designed for iPod only. You cannot connect any other album or folder name (“ ”) during normal play.
portable audio players. total playing time while the player is stopped.
To use an iPod, refer to the user’s guide of your iPod. The system offers the following display modes.
Sony cannot accept responsibility in the event that data recorded to
iPod is lost or damaged when using an iPod with this unit. Display mode When the system is off,
Power Saving The display is turned off to conserve
Mode1) power. The timer and clock continue
Creating your own program to operate.
Clock2) The clock is displayed.
(Program Play) 1)
You cannot set the clock in Power Saving Mode.
2)
Use buttons on the remote to create your own program. The clock display automatically turns to Power Saving Mode after
8 seconds.
1 Select the CD function.
Notes on the display information
Press FUNCTION +/  repeatedly. Characters that cannot be displayed appear as “_”.
2 Select the play mode. The following are not displayed;
total playing time for an MP3 disc.
Press PLAY MODE  repeatedly until “PGM” remaining playing time for an MP3 file.
appears while the player is stopped. The following are not displayed correctly;
3 Select the desired track or file number. elapsed playing time of an MP3 file encoded using VBR (variable
bit rate).
Press  /  repeatedly until the desired folder and file names that do not follow either the ISO9660
track or file number appears. Level 1, Level 2 or Joliet in the expansion format.
When programming MP3 files, press + /  The following are displayed;
total playing time for a CD-DA disc during normal play.
repeatedly to select the desired folder, and then select
remaining playing time for a track.
the desired file. ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
Selected track or file number priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
up to 15 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (˝ $ % ’ ( ) * , – . / < = > @
[ \ ] _ ` { | } ! ? ^).

Total playing time of the

selected track or file

8
 HCD-EC69i/EC79i/EC99i
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.

3-1. DISASSEMBLY FLOW

• HCD-EC69i/EC79i: US, Canadian
3-4 ORNAMENT PLATE (DOCK) OR iPod ASSY
SET
(Page 11)

3-2. SIDE PANEL (L)/(R) 3-5 BASE (DOCK)

(Page 10) (Page 12)

3-3. TOP PANEL BLOCK

(Page 10)

3-6. MAIN BOARD 3-7 FRONT PANEL BLOCK 3-8. BASE UNIT
(Page 12) (Page 13) (BU-K8BD90-WOD)
(Page 13)

3-9. OPTICAL PICK-UP BLOCK

(KSM-213CDP/C2NP)
(Page 14)

• HCD-EC79i: UK, Australian/EC99i

3-4 ORNAMENT PLATE (DOCK) OR iPod ASSY
SET
(Page 11)

3-10. SIDE PANEL (L)/(R) 3-5 BASE (DOCK)

(Page 14) (Page 12)

3-11. TOP PANEL BLOCK 3-12. CD MECHANISM DECK (CDM76A-K6BD90-WOD)

(Page 15) (Page 15)

3-13. MAIN BOARD 3-14. FRONT PANEL BLOCK 3-15. BASE UNIT 3-17. BELT (CDM76)
(Page 16) (Page 16) (BU-K6BD90-WOD) (Page 18)
(Page 17)

3-16. OPTICAL PICK-UP BLOCK

(KSM-213DCP/C2RP)
(Page 17)

9
HCD-EC69i/EC79i/EC99i

Note: Follow the disassembly procedure in the numerical order given.

3-2. SIDE PANEL (L)/(R)

(HCD-EC69i/EC79i: US, Canadian)

3 two claws

2 two screws
(BVTP3 u 10)

4 3 two claws

1 three screws
(case3 TP2) 2 two screws
(BVTP3 u 10)

4
5 side panel (L)

5 side panel (R)

1 three screws
(case3 TP2)

3-3. TOP PANEL BLOCK

(HCD-EC69i/EC79i: US, Canadian)

R top panel block

 two screws
(BVTP3 × 10)

 two claws

 connector
(SW750) 
 flexible flat cable (21 core)
(CN201)
 screw
(KTP3 × 10)

 screw
(BVTP3 × 10)  screw
(BVTP3 × 10)

 bracket (PWB)

 screw
(KTP3 × 10)

10
 HCD-EC69i/EC79i/EC99i

3-4. ORNAMENT PLATE (DOCK) OR iPod ASSY

Note: This illustration sees the front panel from bottom side.

 Press the iPod dock in the direction of arrow ".

"

 four claws

 Push the gap by

the flat-head screwdriver.
Note: Avoid a claw and put a
flat-head screwdriver in.

 Push in flat-head screwdriver.

Note: Avoid a claw and put a
flat-head screwdriver in.

 claw

 Open the iPod dock.  Push in flat-head screwdriver.

Note: Avoid a claw and put a
flat-head screwdriver in.

 claw

 ornament plate (dock) or iPod assy

 three claws

 Turn up a ornament plate (dock) or

iPod assy lowpart and remove it without
using by the flat-head screwdriver.

11
HCD-EC69i/EC79i/EC99i

3-5. BASE (DOCK)

Note: This illustration sees the front panel from bottom side.

 two screws
(B2.6)

 Left up the IP board.

 boss
 base (dock)

 boss

3-6. MAIN BOARD

(HCD-EC69i/EC79i: US, Canadian)

 connector
(EC69i: CN102, EC79i: CN101)
 fan motor connector
(CN601)

 MAIN board

 two screws
(BVTP3 × 10)

 two screws
(BVTP3 × 10)

 connector
(CN504)

 connector
(CN609)

 flexible flat cable (5 core)

(CN603)

12
 HCD-EC69i/EC79i/EC99i

3-7. FRONT PANEL BLOCK

(HCD-EC69i/EC79i: US, Canadian)

1 flexible flat cable (25 core)

(CN607)

2 flexible flat cable (11 core)

5 front panel block (CN653)

3 flexible flat cable (7 core)

(EC69i: CN606),
flexible flat cable (9 core)
4 three screws (EC79i (US, Canadian): CN605)
(BVTP3 u 10)

3-8. BASE UNIT BLOCK (BU-K8BD90-WOD)

(HCD-EC69i/EC79i: US, Canadian)

Note: This illustration sees the base unit from CD board side.

 four screws  two vibration proof rubbers

(PWH B2.6) (green)

 base unit
 two vibration proof rubbers
(BU-K8BD90-WOD)
(red)

 four claws


 CD cover

top panel block

(bottom view)

13
HCD-EC69i/EC79i/EC99i

3-9. OPTICAL PICK-UP BLOCK (KSM-213CDP)

(HCD-EC69i/EC79i: US, Canadian)

 optical pick-up block

(KSM-213CDP)

 wire (flat type) (16 core)

(optical pick-up, CD board: CN201)

 CD board

 Remove the four solders.

3-10. SIDE PANEL (L)/(R)

(HCD-EC79i: UK, Australian/EC99i)

3 two claws
2 two screws
(BVTP3 u 10)

2 two screws
1 four screws (BVTP3 u 10)
(case3 TP2) 3 two claws

5 side panel (L)

4

5 side panel (R)

1 four screws
(case3 TP2)

14
 HCD-EC69i/EC79i/EC99i

3-11. TOP PANEL BLOCK

(HCD-EC79i: UK, Australian/EC99i)

 two claws  two screws

(BVTP3 × 10)

 top panel block

 flexible flat cable (5 core)
(CN302)

 screw
(BVTP3 × 10)


 screw
(KTP3 × 10)

 flexible flat cable (21 core)

(CN201)

 screw
(KTP3 × 10)

3-12. CD MECHANISM DECK (CDM76A-K6BD90-WOD)

(HCD-EC79i: UK, Australian/EC99i)

 top lid
 two screws
(B2.6)

 two screws
(B2.6)

 CD mechanism deck block

(CDM76A-K6BD90-WOD)

 flexible flat cable (5 core) 

 top panel (loading)

 four screws
(BVTP3 × 10)

15
HCD-EC69i/EC79i/EC99i

3-13. MAIN BOARD

(HCD-EC79i: UK, Australian/EC99i)

 fan motor connector

(CN601)

RB bracket (PWB) RT MAIN board  flexible flat cable (5 core)

(CN603)
 flexible flat cable (7 core)
R screw (EC99i: CN643)
(BVTP3 × 10)

(EC99i)
 two screws
(BVTP3 × 10)
 two screws
(BVTP3 × 10)

 connector
(EC79i: CN704,  four screws
EC99i: CN654) (BVTP3 × 10)

 connector
(CN609)

 connector
(EC79i: CN101,
 connector
EC99i: CN205)
(EC99i: CN102)

3-14. FRONT PANEL BLOCK

(HCD-EC79i: UK, Australian/EC99i)

 flexible flat cable (25 core)

(CN607)

 flexible flat cable (11 core)

 front panel block (CN653)

 flexible flat cable (9 core)

 three screws (CN605)
(BVTP3 × 10)

16
 HCD-EC69i/EC79i/EC99i

3-15. BASE UNIT (BU-K6BD90-WOD)

(HCD-EC79i: UK, Australian/EC99i)
Note: This illustration sees the base unit from CD board side.

 two coil springs (insulator)

 four screws
(PTPWH M2.6)
 two coil springs (insulator)

 two insulators

 base unit
(BU-K6BD90-WOD)  two insulators


top panel block

(bottom view)

3-16. OPTICAL PICK-UP BLOCK (KSM-213DCP)

(HCD-EC79i: UK, Australian/EC99i)

 optical pick-up block

(KSM-213DCP)

 flexible flat cable (16 core)

(optical pick-up, CD board: CN201)

 CD board

 Remove the four solders.

17
HCD-EC69i/EC79i/EC99i

3-17. BELT (CDM76)

(HCD-EC79i: UK, Australian/EC99i)

 belt (CDM76)

 Draw out the tray.

bracket

 Push hard the bracket by tray

the flat-head screwdriver.

bracket flat-head screwdriver

– CD mechanism deck (front view) –

18
 HCD-EC69i/EC79i/EC99i
SECTION 4 Ver. 1.1
TEST MODE
COLD RESET CD TRAY LOCK (EC79i: UK, Australian/EC99i)
The cold reset clears all data including preset data stored in the This mode is for the antitheft of CD disc in shop. (not for transport)
memory to initial conditions. Execute this mode when returning Procedure:
the set to the customer. 1. Press the [?/1] button to turn the power on.
Procedure: 2. Press the [FUNCTION] button to select CD function.
1. In the standby status, press the [?/1] button to turn the power 3. Insert a disc.
on. 4. While pressing the [x] button, press the [Z] button for more 5
2. Press three buttons of [x], [CD] and [?/1] simultaneously. seconds.
3. When “RESET” appears, the set enters standby status. 5. The message “LOCKED” is displayed and the disc tray is
locked. (Even if exiting from this mode, the disc tray is still
PANEL TEST MODE locked)
Enter The Panel Test Mode 6. If press the [Z] button to eject the disc, the message “LOCKED”
Procedure: is displayed and can not eject the disc.
1. In the standby status, press the [?/1] button to turn the power 7. To release this lock, while pressing the [x] button, press the
on. [Z] button for 5 seconds again.
2. Press three buttons of [x], [iPod] and [?/1] simultaneously 8. The message “UNLOCKED” is displayed and the disc tray is
(EC69i/EC79i: US, Canadian models). unlocked.
Press three buttons of [DISPLAY], [x] and [iPod] simultane-
ously (EC79i: UK, Australian/EC99i). CD POWER MANAGE
3. When the panel test mode is activated, LEDs and segments of This mode is for switch the CD power supply on/off. Even if this
the liquid crystal display are all turned on. state pulls out AC plug, it is held.
Procedure:
Version Check 1. Press the [?/1] button to turn the power on.
Procedure: 2. Press the [FUNCTION] button to select CD function.
1. In the panel test mode (all LEDs and segments of the liquid 3. Press the [?/1] button again to turn the power off (standby).
crystal display are turned on), press the [FUNCTION] button. 4. After pressing the [DISPLAY] button on the remote com-
2. On the liquid crystal display, date and version are displayed mander, while pressing the [x] button, press the [?/1] button.
“xxxxxxxx”. 5. It turns power on and display “CD POWER”, then display
3. From this status, press the [u] button, and the destination and “ON” or “OFF”.
model name are displayed.
4. To release from this mode, press three button of [x], [iPod] and CHANGE-OVER THE AM TUNING INTERVAL
[?/1] simultaneously (EC69i/EC79i: US, Canadian models). (EC69i: US, Canadian, Australian/EC79i: US, Canadian,
To release from this mode, press three buttons of [DISPLAY], Australian/EC99i: US, Canadian and Australian models)
[x] and [iPod] simultaneously (EC79i: UK, Australian/ The AM tuning interval can be changed over 9 kHz or 10 kHz.
EC99i). Procedure:
1. Press the [?/1] button to turn the power on.
Key Test Mode 2. Press the [FUNCTION] button to select TUNER (AM) func-
Procedure: tion.
1. In the panel test mode (all LEDs and segments of the liquid 3. Press the [?/1] button again to turn the power off (standby).
crystal display are turned on), press the [x] button. 4. After pressing the [DISPLAY] button on the remote com-
2. The message “KEY0 0 0”displayed. Whenever any buttons mander, while pressing the [TUNING + M L] button,
are pressed and the [VOLUME] dial is turned, the value is press the [?/1] button.
changed. 5. It turns power on and display “9k STEP” or “10k STEP”, and
3. To release from this mode, press three button of [x], [iPod] and thus the tuning interval is changed over.
[?/1] simultaneously (EC69i/EC79i: US, Canadian models).
To release from this mode, press three buttons of [DISPLAY],
[x] and [iPod] simultaneously (EC79i: UK, Australian/
EC99i).

CD REPEAT 5 LIMIT CANCEL MODE

Number of repeats for CD playback is 5 times when the repeat
mode is “REPEAT”. This mode enables CD to repeat playback for
limitless times.
Procedure:
1. Press the [?/1] button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Press three buttons of [x], [TUNING + M L] and [?/1]
simultaneously (EC69i/EC79i: US, Canadian models).
Press three buttons of [DISPLAY], [x] and [TUNING + M
L] simultaneously (EC79i: UK, Australian/EC99i).
4. It enters the CD repeat 5 limit cancel mode and displays “NO
LIMIT”.
5. To release this mode, press the [?/1] button to turn the power off.

19
HCD-EC69i/EC79i/EC99i

CD SERVO TEST MODE CD Servo Test Mode Tree:

This mode can check the servo system operations of the optical Higher layer Lower layer of menu hierarchy
pick-up system (= optical unit + CD board). S Curve Mode LD ON
(BDT S CU) (LD ON)
RAM Read Mode Disc Type value indication
Note 1: Do not enter the this mode while any other test mode is in prog- (BDTRAM R) (DISCTYPE) (AL: 0000, RW: 0001)
ress. Gain Index value indication
Note 2: Do not enter any other test mode while the this mode is in prog- (GAININDX) (0001)
ress. RFO GAIN value indication
(RFO_GAIN) (0009)
FEO GAIN value indication
How to Enter the CD Servo Test Mode (FEO_GAIN) (0005)
Procedure: SBAD GAIN value indication
1. Press the [?/1] button to turn the power on. (SBAD_GAI) (0007)
TEO GAIN value indication
2. Press the [FUNCTION] button to select CD function.
(TEO_GAIN) (000A)
3. Press three buttons of [u], [TUNING + M L] and Disc Size value indication
[?/1] simultaneously. (DISCSIZE) (0000: Non disc, 0001: 8cm,
4. It enters the CD servo test mode and displays “BDT S CU”. 0002: 12cm)
Op ABRAKE Error value indication
(OPABRKER) (0000)
How to Exit from the CD Servo Test Mode SBBT Data value indication
Procedure: (SBBT DAT) (006C)
FEOOCD value indication
1. Press three buttons of [u], [TUNING + M L] and
(FEOOCD) (0440)
[?/1] simultaneously. RAM Write Mode SPG Mask value edit
2. It releases from the CD Servo Test Mode and returns to the (BDTRAM W) (00 SPG) (Non mask:00, Mask:01)
ordinary CD function. Fix RF Gain value edit
(00 FIX) (Non Fix:00, AL Fix:01, RW Fix:02)
TMAX ON value edit
Key Operation: (00 TMA)
[ +], [ –]: Driver Mute OFF value edit
(00 D_M) (Normal:00, Forced OFF:01)
Use these keys to move between the five modes
Command Out Mode COMOUT6X value edit command out
contained in the CD Servo Test Mode, that are the (BDT COMO) (COMOUT6X) (000000) (OK)
S-Curve Mode, the RAM Read Mode, the RAM READ2X value edit command out
Write Mode, the Command Out Mode and the Error (READ2X) (60) (50)
REG READ value edit command out
Rate Mode as described below. Also, use these keys (REG_READ) (00) (0000)
to move between the menus within the respective FEBC? command out
five modes. When [ +] is pressed, the screen ad- (FEBC?) (00)
FGADD? command out
vances to the next menu or to the next mode. When
(FGADD?) (10)
[ –] is pressed, the screen returns back to the TEBC? command out
previous menu or to the previous mode. Use these (TEBC?) (00)
keys also to increase or decrease the numeric value TGADD? command out
(TGADD?) (00)
when changing the numeric value. Pressing [ +] RFGC? command out
increases the value and pressing [ –] decreases (RFGC?) (00)
the value. FEOF? command out
(FEOF?) (FFC0)
TEOF? command out
[DSGX], [iPod]: (TEOF?) (FFC0)
Use these keys to move between the different layers TEIOCD1? command out
of the hierarchy of the CD Servo Test Mode shown (TEIOCD1?) (FE80)
TEIOCD2? command out
below. Press [DSGX] to move down to the lower (TEIOCD2?) (FF40)
layer, and press [iPod] to move up to the higher TEIOCD3? command out
layer. (TEIOCD3?) (FFC0)
TEOOCD? command out
(TEOOCD?) (FD00)
[TUNING + M L], [– TUNING l m]: FEOOCD? command out
Use these keys to move the cursor to the right digit (FEOOCD?) (F780)
or to the left digit in the six-digit number, when MONITOR value edit command out
(MONITOR) (570A00) (OK)
changing the numeric value. Error Rate Mode Error rate indication
Press [TUNING + M L] to move the cursor (BDT ERR) (00000000)
to the right, and press [– TUNING l m] to
return the cursor to the left.

[FUNCTION]:
Use this key to execute Command Out in the Com-
mand Out Mode.

20
 HCD-EC69i/EC79i/EC99i

CD SERVICE MODE 2 It indicates the error content

This mode can move the SLED of the optical pick-up, and also can 01: The focus servo cannot lock-in.
turn the optical pick-up laser power on and off. 02: GFS is no good (NG).
Procedure: 03: The startup time exceeds the specified period of time (time
1. Press the [?/1] button to turn the power on. over)
2. Press three buttons of [u], [ +] and [?/1] simultaneously. 04: The focus servo is unlocked continuously.
3. Press the [FUNCTION] button to select CD function. 05: Q code cannot be obtained within the specified period of
4. It enters the CD service mode and displays “SERVICE”. time.
5. To exit from this mode, press three buttons of [u], [ +] 06: The tracking servo cannot lock-in.
and [?/1] simultaneously. 07: Blank disc

Key Operation: 3 It indicates the on-going processing of optical pick-up system

[TUNING + M L], [– TUNING l m]: (= optical unit + CD board) when the trouble has occurred.
Use these keys to move the SLED. When [TUN- 01: The CD SHIP mode processing is in progress.
ING + M L] is pressed in this mode, the SLED 02: The POWER OFF processing is in progress.
moves to outer circumference and the message 03: The INITIALIZE processing is in progress.
“SLED OUT” is displayed. 04: The optical pick-up system (= optical unit + CD board) is
When [– TUNING l m] is pressed in this in the stop state.
mode, the SLED moves to inner circumference and 05: The STOP operation is in progress.
the message “SLED IN” is displayed. 06: The startup processing is in progress.
07: The TOC read-in processing is in progress.
[DISPLAY]: 08: The SEARCH operation is in progress.
Use this key to turn the optical pick-up laser power 09: The PLAY operation is in progress.
on and off. When the laser power is turned on, the 0A: The PAUSE operation is in progress.
message “LD ON” is displayed. When the laser 0B: The PLAY – MANUAL SEARCH operation is in prog-
power is turned off, the message “LD OFF” is dis- ress.
played. 0C: The PAUSE – MANUAL SEARCH operation is in prog-
ress.
CD ERROR CODE
The past errors of the optical pick-up system (= optical unit + CD 4 It indicates the operation that is being processed when the trou-
board) are displayed as the BD Errors as shown below. ble has occurred.
Procedure: It indicates the step number of each processing specified by 3.
1. Press the [?/1] button to turn the power on. Because the numbers of steps are different in each processing,
2. Press the [FUNCTION] button to select CD function. this number is different in each processing.
3. Press three buttons of [x], [DSGX] and [?/1] simultaneously
(EC69i/EC79i: US, Canadian models).
Press three buttons of [ +], [x] and [DISPLAY] simultane-
ously (EC79i: UK, Australian/EC99i).
4. Then, the BD error code is displayed as “D0xxxxxx” (x means
hexadecimal number) on the liquid crystal display as shown
below.
5. Every pressing of the [TUNING + M L] button in this
mode increments the number after “D” starting from “D0”
up to “D9”, and then returns to “D0”. Every pressing of the
[– TUNING l m] button in this mode decrements the
number after “D”. The smaller the error code number is, the
newer the error content is.
6. To release from this mode, press the [?/1] button to turn the
power off.

Contents of “BD Errors”

Error display example
D 0 02 09 01
1 2 3 4

1 It indicates the error history number

0 to 9: The error code number 0 indicates the newest error.

21
HCD-EC69i/EC79i/EC99i

CD FACTORY MODE

Note 1: Do not enter the this mode while any other test mode is in prog-
ress.
Note 2: Do not enter any other test mode while the this mode is in prog-
ress.

Procedure:
1. Press the [?/1] button to turn the power on.
2. Press the [FUNCTION] button to select CD function
3. Press three buttons of [u], [iPod] and [?/1] simultaneously.
4. It enters the CD factory mode and the message “FACTORY”
is displayed. When the [CD] button is pressed four times, the
following message (initial display) is displayed.

–X1ON
S character mode setting
Tracking servo setting
RF gain setting

Key Operation:
[CD]:
The display changes in the following order when-
ever the button is pressed.
(Initial display)

fcsAG ** (**: Focus AGC value)

trkAG ** (**: Track AGC value)

RF-AG ** (**: RF AGC value)

[DSGX]:
RF gain setting changes whenever the button is
pressed.
“–”: No gain fixation.
“AL”: Fix to the gain for AL disc.
“RW”: Fix to the gain for RW disc.

[iPod]:
Tracking servo setting changes whenever the but-
ton is pressed.
“ON”: Tracking servo ON.
“OFF”: Tracking servo OFF.

[FUNCTION]:
S character mode setting changes whenever the but-
ton is pressed.
“ ”: S character mode OFF.
“S”: S character mode ON.

5. To release from this mode, press three buttons of [u], [iPod]

and [?/1] simultaneously.

22
 HCD-EC69i/EC79i/EC99i
SECTION 5 Ver. 1.1
ELECTRICAL ADJUSTMENTS
CD SECTION TUNER SECTION 0 dB = 1 μV FM FREQUENCY COVERAGE ADJUSTMENT Adjustment Location and Connecting Points:
Reading on Digital
Note: Adjustment Part Frequency Display – MAIN Board (Component Side) –
[AM] Voltmeter
1. CD Block is basically constructed to operate without adjustment. Setting:
2. Use YEDS-18 disc (Part No. 3-702-101-01) unless otherwise indicat- L803 87.5 kHz 1.75 ± 0.1 V
FUNCTION: AM
ed. Confirmation 108 kHz 6.2 ± 0.5 V
3. Use an oscilloscope with more than 10 MΩ impedance. 60 cm
4. Clean the object lens by an applicator with neutral detergent when the
signal level is low than specified value with the following checks. loop antenna A loop antenna B
FM TRACKING ADJUSTMENT
5. Check the focus bias check when optical pick-up block is replaced. AM RF signal
generator Adjust for a minimum reading on level meter
level meter L804 98 MHz
FOCUS BIAS CHECK
32 Ω
oscilloscope +
(DC range) set –
30% amplitude FM DETECTOR ADJUSTMENT
modulation by L802
CD board JACK board Setting: FM Detector
400 Hz signal MAIN board MAIN board
PHONES jack (J492) FUNCTION: FM Adjustment
TP121 (RFI) + Output level: 54 dBuV CN801 pin  IC801 pin RT L803
TP124 (VC) – (TUNER OUT L-ch) FM Frequency
FM RF signal MAIN board L804
[FM] CN801 pin  Coverage
generator level meter FM Tracking
Procedure: Adjustment
Setting: Adjustment
1. Connect the oscilloscope to TP121 (RFI) and TP124 (VC) on FUNCTION: FM
+ L805
the CD board. set
– AM Tracking
2. Press the [?/1] button to turn the power on, and press the Adjustment
FM RF signal
[FUNCTION] button to select CD function. generator MAIN board level meter
MAIN board
3. Set disc (YEDS-18) and press the [u] button to playback. CN801 pin  Carrier frequency: 98 MHz MAIN board JW801 (TUNER-GND)
0.01 F 32 Ω Modulation: CN801 pin 
4. Confirm that oscilloscope waveform is as shown in the figure – MAIN Board (Conductor Side) –
+ deviation by FM 75 kHz
below (eye pattern). set Output level: 60 dBuV
–
A good eye pattern means that the diamond shape (◊) in the IC801 pin XL
center of the waveform can be clearly distinguished. 75 kHz frequency JACK board (TUNER VT)
MAIN board PHONES jack (J492) 1. Turn the set to 98 MHz. 3
deviation by 1 kHz CN801 pin 
VOLT/DIV: 200 mV signal 2. Adjust L802 so that modulation distortion may become the CN801
TIME/DIV: 500 ns Output level: as low as possible best in the vicinity of the maximum value where the tuner out 1 36 19
(8 dBuV) 1 18
level becomes –15 dBuV or more.
IC801
level: digital voltmeter JW801
1.2 ± 0.3 Vp-p FM AUTO STOP CHECK
generator (TUNER-GND)
MAIN board IC801 pin RT
100 k Ω
IC801 pin XL (TUNER VT) (TUNER OUT L-ch)
SET
+
Checking Location:
75 Ω
– CD Board (Conductor Side) – • Repeat the procedures in each adjustment several times.

AM FREQUENCY COVERAGE CONFIRMATION

(US, Canadian and Australian models)
Frequency Display Reading on Digital Voltmeter
530 kHz 1.45 ± 0.3 V Procedure :
1,710 kHz 7.7 ± 0.5 V
1. Turn the power on.
TP124 2. Input the following signal from Signal Generator to FM an-
(VC) tenna input directly.
AM FREQUENCY COVERAGE CONFIRMATION
(UK model) Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
TP121 Frequency Display Reading on Digital Voltmeter Deviation : 75 kHz
(RFI) Modulation : 1 kHz
531 kHz 1.45 ± 0.3 V
ANT input : 35 dBu (EMF)
IC101 1,602 kHz 7.2 ± 0.5 V
Note: Please use 75 ohm “coaxial cable” to connect SG and the set. You
cannot use video cable for checking.
AM TRACKING ADJUSTMENT Please use SG whose output impedance is 75 ohm.
(US, Canadian and Australian models)
Adjust for a maximum reading on level meter 3. Set to FM tuner function and scan the input FM signal with
L805 530 kHz automatic scanning.
4. Confirm that input Frequency of A, B and C detected and auto-
matic scanning stops.
AM TRACKING ADJUSTMENT (UK model)
Adjust for a maximum reading on level meter The stop of automatic scanning means “The station signal is re-
ceived in good condition”.
L805 531 kHz

HCD-EC69i/EC79i/EC99i
23 23
HCD-EC69i/EC79i/EC99i
SECTION 6
DIAGRAMS
6-1. BLOCK DIAGRAM - CD, TUNER Section -
CN801
ANTENNA
FM/AM

3 BAND-PASS
FILTER 36 FM RF-IN FM-MIX 3 8 FM IF-IN FM DET-OUT 23 22 MPX-IN L-OUT 12 TUNER-L B
FL803
(Page 25)
L805 R-OUT 13 R-CH
AM T801
TRACKING AM IF
1
CF801
1 AM RF-IN AM-MIX 5 7 AM IF-IN AM DET-OUT 24

D801

+9V L804 AM/FM-DET, OSC, MIX, PLL, IF AMP

FM 34 FM RF-OUT IC801
TRACKING
• R-ch is omitted due to same as L-ch.
• SIGNAL PATH L803
FM FREQUENCY
: TUNER (FM/AM) COVERAGE
32 FM-OSC

: CD PLAY L802

XOUT
AGC
11 FM-DET

XIN
DO
FM

CE
CL
DI
DETECTOR
16 18 17 15 25 19 20

X801
75kHz
56 48 57 55 39
OPTICAL PICK-UP BLOCK
CD-MP3 PROCESSOR
(KSM-213CDP (EC69i/EC79i: US, Canadian))

O-TU-DI
I-TU-DO
O-TU-CLK
O-TU-CE
I-TU-ANSD
IC101
(KSM-213DCP (EC79i: UK, Australian/EC99i))

A 95 FNi1 (A) LO 30 CD-L A

B 97 FPi1 (B) RO 27 R-CH
94 FNi2 (C)
(Page 25)
C
SYSTEM CONTROLLER
D 96 FPi2 (D) IC301 (1/3)
E 100 TNi (E)
F 98 TPi (F) BUS0 38 17 I/O-CD-BUS0
BUS1 39 18 I/O-CD-BUS1
(EC79i: UK, Australian/EC99i)
BUS2 (SO) 40 19 I/O-CD-BUS2 LOADING
AUTOMATIC BOARD
BUS3 (SI) 41 20 I/O-CD-BUS3
POWER
LD 91 LDo BUCK (CLK) 42 25 O-CD-BUCK
CONTROL O-CDM-M+/NC 8
XCCE 43 26 O-CD-CCE M+
Q301
O-CDM-M-/NC 10 MOTOR M-
PIO0 48 24 I-REQ
PD 92 MDi DRIVER
MOTOR VREF IC303
CONTROL
VC 84 VRo Q307

I-CDM-OPEN/CDM-OPEN_CLOSE 7 OPEN SW
FOCUS/TRACKING COIL DRIVE, S201 I-CDM-CLOSE 5 CLOSE SW
SLED/SPINDLE MOTOR DRIVE (LIMIT)
IC401
IO0 (/HSO) 20 CD +3.3V
SP+ 2 VO1+ IN1 3 13 DMo (EC69i/EC79i: US, Canadian)
SP- 1 VO1- XO 24
SL+ 12 VO2- IN2’ 9 12 FMo X102 SW351
16.9344MHz (CD LID OPEN/CLOSE DETECT)
SL- 11 VO2+ XI 23
T+ 18 VO3+ IN3’ 20 10 TRo
T- 17 VO3- SBSY 54 43 O-CD-SBSY
F+ 26 VO4+ IN4’ 24 9 FOo XRST 37 27 O-CD-RST
F- 27 VO4-

MUTE 7 23 O-DR-MUTE

HCD-EC69i/EC79i/EC99i
24 24
 HCD-EC69i/EC79i/EC99i

6-2. BLOCK DIAGRAM - MAIN Section -

(EC69i)

POWER
R-ch is omitted due to same as L-ch. AMP
SIGNAL PATH IC102

: TUNER (FM/AM)
: CD PLAY
(EC79i)
: iPod POWER
AMP
: PC IN IC101
ELECTRICAL VOLUME, R-CH J492
INPUT SELECTOR, PHONES
IC602
(EC99i)
TB602 (EC69i)
POWER RY602
J491 R-CH SPEAKER
PC IN 8 AUDIO-L OUT-L 19 AMP + IMPEDANCE
IC103 L
(EC79i/EC99i) – USE 6Ω

R-CH R-CH + SPEAKER

SUBWOOFER R LOW FREQ.
A CD-L 6 CD-L VOL-L 12 BAND-PASS FILTER + – IMPEDANCE
Q701 - 703, 804 USE 8Ω
(Page 24)
POWER TB601
AMP RY601
B TUNER-L 4 TUNER-L SEL-L 9 IC201 +
L
CN902
(Page 24) – SPEAKER
HIGH FREQ.
(iPod Dock)
IMPEDANCE
R-CH +
SDATA

USE 8Ω
SCLK

LINE AMP R
LINE-OUT-L 27 2 iPod-L
LINE-OUT-R 28 R-CH
IC770 –
26 25
R-CH R-CH R-CH (EC79i/EC99i)
RXD 18 (EC79i)
TXD 19 (EC99i)
DGND 30 STANDBY OVER LOAD OVER LOAD OVER LOAD OVER LOAD
SWITCH DETECT DETECT DETECT DETECT TB603
RY701
Q608 Q141, 142 Q201, 202 Q203 Q151, 152
+ SUBWOOFER
IMPEDANCE
45 29 31 33 34 – USE 4Ω
D203
O-AUDIO-DATA
I-iPod-DET
I-iPod-TXD
O-iPod-RXD

O-AUDIO-CLK

RELAY DRIVE
D140 Q704, 705
(EC69i/EC79i)
SYSTEM CONTROLLER RELAY DRIVE
IC301 (2/3) Q604

SUBWOOFER
SWITCH
RELAY DRIVE Q614
O-SP-RELAY-ON/TC ON/SW ON 2
Q610, 613

SP-L
PROTECT RELAY PROTECT
DETECT OVER LOAD DETECT
Q611, 612 C
(Page 26)
O-POWER

HCD-EC69i/EC79i/EC99i
25 25
HCD-EC69i/EC79i/EC99i
Ver. 1.1

6-3. BLOCK DIAGRAM - PANEL, POWER SUPPLY Section -

SP-L
D601

R-CH FAN MOTOR

PROTECT DRIVE
+9V DETECT Q601, 602
Q607

C AC D602, 606
(Page 25) OVER LOAD DETECT DETECT
Q605, 606

D605 PROTECT
M601
RELAY PROTECT DETECT M (FAN)
Q603

14 X1A O-POWER
X301
32.768kHz
13 X0A
D628 PROTECT • Abbreviation
92 X1
DETECT +9V AUS : Australian model
X302 Q618
6MHz +1.5V CND : Canadian model
93 X0 CD +1.5V REGULATOR
IC201 D631
+3.3V
CD +3.3V REGULATOR PT004 (EC69i)
59 - 62

COM0, COM1,
Q622, 624 PT005 (EC79i/EC99i)
CMO2, CMO3 +3V D617
LCD301 MAIN POWER
TUNER +3V REGULATOR
LIQUID TRANSFORMER
Q801
63, 64, 67 - 89, 94 - 100, 1

CRYSTAL
DISPLAY RECT
+5V +VH
D607 - 610 (EC69i/EC79i)
SEG0 - SEG32 TUNER +5V REGULATOR -VH D613 (EC99i)
Q802
+9V
+9V REGULATOR
IC601
O-CD-ON 4

D305 LED DRIVE I-5V/9V-DET 40

28 O-LED
(STANDBY) Q301
DC/DC
CONVERTER
SYSTEM CONTROLLER VBUS +5V
IC701,
IC301 (3/3) (EC69i)
Q706 - 710
REMOTE CONTROL
D902, 906
RECEIVER 9 I-RMC
(iPod INDICATOR)
IC302

D629, 630 RY001

RECT
RELAY B+
D611, 612

5V-ON 11 (EC79i/EC99i)
SW301, 302 (EC79i: UK, AUS/EC99i),
SW303 (EC69i/EC79i: US, CND),
SW311, 313 - 316, PT001 (EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
SW317 (EC79i: UK, AUS/EC99i), PT002 (EC69i: UK/EC79i: UK/EC99i: UK)
SW318 (EC99i), 321 - 325, PT003 (EC69i: AUS/EC79i: AUS/EC99i: AUS)
D303 +4V SUB POWER TRANSFORMER
SW326 (EC79i: UK, AUS/EC99i)
(FRONT PANEL KEYS) SYSTEM +3.3V REGULATOR
Q302, 303 (AC IN)
RECT
VSTBY
37, 38, 41

VOLTAGE D001, 002

I-KEY1, I-KEY2,
I-HOLD 42 DETECT
I-KEY-WAKE-UP/VOL
Q304, 305
RESET
I-RST 54 SWITCH
ROTARY Q306
VOLUME ENCODER
S301 D003
I-P-MONI 36 MAIN POWER
O-POWER 3 ON/OFF CONTROL
Q619

HCD-EC69i/EC79i/EC99i
26 26
 HCD-EC69i/EC79i/EC99i

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. • Circuit Boards Location
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards. For Schematic Diagrams.
Note: Note:
• X : parts extracted from the component side. • All capacitors are in μF unless otherwise noted. (p: pF) 50
• Y : parts extracted from the conductor side. WV or less are not indicated except for electrolytics and – EC69i –
• W : indicates side identified with part number. tantalums. CD board
• : Pattern from the side which enables seeing. • All resistors are in Ω and 1/4 W or less unless otherwise
(The other layers' patterns are not indicated.) specified.
• f : internal component. MAIN board
Caution: • 2 : nonflammable resistor.
Pattern face side: Parts on the pattern face side seen from • C : panel designation.
(Conductor Side) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from Note: Note:
(Component Side) the parts face are indicated. The components identi- Les composants identifiés
fied by mark 0 or dotted par une marque 0 sont PANEL board
Caution: line with mark 0 are criti- critiques pour la sécurité. REG board
Pattern face side: Parts on the pattern face side seen from cal for safety. Ne les remplacer que par
(SIDE B) the pattern face are indicated. Replace only with part une piéce portant le nu-
Parts face side: Parts on the parts face side seen from number specified. méro spécifié. 2CH-4CH AMP board
(SIDE A) the parts face are indicated.
• A : B+ Line.
• B : B– Line.
• Indication of transistor.
• H : adjustment for repair.
• Voltages and waveforms are dc with respect to ground PT-SINGLE board
C under no-signal (detuned) conditions. JACK board
Q These are omitted. – CD Board –
no mark : CD PLAY
B E
– Other Boards –
no mark : TUNER (FM/AM)
• Voltages are taken with VOM (Input impedance 10 MΩ).
Q
Voltage variations may be noted due to normal production
tolerances.
B C E • Waveforms are taken with a oscilloscope. IP board KEY board
These are omitted. Voltage variations may be noted due to normal production
tolerances.
• Abbreviation • Circled numbers refer to waveforms.
AUS : Australian model • Signal path.
CND : Canadian model F : TUNER (FM/AM)
J : CD PLAY
i : iPod – EC79i/EC99i –
f : PC IN
• Abbreviation CD board
AUS : Australian model
CND : Canadian model LOARDING board
3CH AMP board (EC99i)

MAIN board

2CH-4CH AMP board (EC99i)

PANEL board

2CH-4CH AMP board (EC79i)

JACK board

PT-SINGLE board

IP board KEY board

HCD-EC69i/EC79i/EC99i
27 27
HCD-EC69i/EC79i/EC99i

6-4. PRINTED WIRING BOARD - CD Board - • See page 27 for Circuit Boards Location. • : Uses unleaded solder.

1 2 3 4 5 6 7 8 9

CD BOARD (CONDUCTOR SIDE)

A

CD BOARD (COMPONENT SIDE)

M M401
(SPINDLE)

R405
S201
(LIMIT)

C401
B

C405
C404 C403

R402

C125
TP124 28 22 IC401 21 15
M402

C124
(VC) (SLED)
C122
R139
M

R136
R140
C123

C136
C

R129

R118
R142 1 7 8 14
R135
R126

R120
R134
R130

R128
R143 R127

R151
R415

C138

C137
R125 C153

R408
R414

C140

C139

C107
TP121 C108
(RFI) C112 R114

C141

C142

C100
R212 75 51
R144 R113
CN201

C143
R211

C146 76 50
R112

C145
C144 1
C105 R210
IC101

R110
C110
C148
D

C147
C133

R111 R209
C149
C104 R218 R208

C106
IC201

C109
R219 R207
C115
C207 R146 R145 R153 R220 R206 P
R147 R221
C206

26 R205 PANEL

R154
1 5 R155
R148 R149 100 R222 BOARD
C201

C116
1 R204
3 4 C150 R150 25 CN608
R223

C102
R104

C101
C120
R203

C119
(Page 36)

C118

C117
C205

C306
C113
R201 C132

C152 C151
C130 R157
C103 R106
R101
X102

R156

R105
C126 21
E C202 R303 C127 R102
R302

C128 R108
11
R304

C301
R202
C204

(11)
C309

1-872-135-
Q301

C307

R301

C303
1 16
CN301

C302
11
F OPTICAL PICK-UP BLOCK
KSM-213CDP (EC69i/EC79i: US, CND),
1-872-135-
(11)
KSM-213DCP (EC79i: UK, AUS/EC99i)

HCD-EC69i/EC79i/EC99i
28 28
 HCD-EC69i/EC79i/EC99i

6-5. SCHEMATIC DIAGRAM - CD Board - • See page 40 for Waveforms. • See page 40 for IC Block Diagrams. • See page 42 for IC Pin Function Description.

R127
0

C107 R126 0
C136
0.1 47p

R125 R120
R142 R139 R129 0 0
22k 47k 1k

470k
Q301
R143 C112 R118 C153 C108
2SA2119K 47k
R140 R134 R130
0.1 100k 0.1
R114
0.1

R128
CN301 0 1M 4.7k 10k
C301 AUTOMATIC POWER
16P
0.1 CONTROL
R136 R135
22k 470k

470p
R303 C306 R301
2.2 100 C307 100k CN201

C138
10V 1 21P
C302 C303
OPTICAL 10 10
R304
2.2 C137
0.01
PICK-UP R212 R211 100
BLOCK
KSM-213CDP
R302
0 1 100

(EC69i/EC79i
: US, CND) C100
0.1
C309 C139 0.01
0.001
KSM-213DCP C106 C140 0.01
(EC79i: UK, 100
10V TP121 (RFI) R113 10k R210 100
AUS/EC99i) C141 0.0022 R209 100
C142 0.1 R218 100k R208 100
M401
(SPINDLE)
C105
0.1
TP124 (VC)
R144 22k
R219 100k

R220 100k
R207

R206
100

100
P
C143 0.01 PANEL
M SP- C144
0.1 C146 470p IC101
R221 100k

R222 100k
R205

R204
100

100
BOARD
SP+ C148
C145 0.01 CD-MP3 PROCESSOR C133 0.1 R223 100k R203 100
CN608
47p C147 0.1
IC101 R112 100
(Page 37)
M402 C149 22p TC94A70FG-006 R111 100
(SLED) C104
0.1 R110 10k IC B/D
M SL+ C110 0.1

C207
SL- 1
R145 0
C206
1
R146 0
R153
R147 0 1M R157 100
C115 C151 470p
R148 0 R155 47 R156 100
22
6.3V C152 470p
R149 0
C116 0.1
C150 0.001 C201 C205
100 0.1
IC201
R154 1M R108 0 10V TK63115SCL-G@GT
R150 C109
0 0.1

2 IC201
R201
0

+1.5V REGULATOR R202

0

C202
C204
100
C117 0.1

0
10V

1k
220
0.022 R105 1M

R151
C119

R106
0.022

R101
C118
0.01 X102
16.9344MHz

C102 0.1
C120

C128 5p

C130 5p
0.01

0.0022
C127
C124 0.0047
R405
10k C132 0.1

C123

0.1
R402 470p
2.2k

C126
R104
C404 C122 0
S201

0.1
C405 C403

C125 0.0047
0.1 470p (LIMIT)
0.1 0.1

C113
R102
C103 10k
0.1

C101 0.1

IC401
FOCUS/TRACKING COIL DRIVE,
SLED/SPINDLE MOTOR DRIVE
IC401
BA5826SFP-E2

IC B/D R408
2.2k
SP-
R414
SP+ 4.7k

SL+ R415
C401
220
47k
10V

SL-

HCD-EC69i/EC79i/EC99i
29 29
 HCD-EC69i/EC79i/EC99i
Ver. 1.1

6-6. SCHEMATIC DIAGRAM - MAIN Board (1/2) - • See page 40 for Waveforms. • See page 40 for IC Block Diagrams.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MAIN BOARD (1/2) D801

SVC389 C851
390p

A C819 L806
R839
10p 120uH
10
L803
L804 FM FREQUENCY R838
22k R826 TP686 R822 CN607
FM COVERAGE 25P
TRACKING 1k 100 R708 R709
10k 1k 25 NC
D804 R842 R841 R825 R824 O-TU-CE TP658
0 10k D803 C823

0.022

0.047
C836

C835

R837

C834

C820
100k
SV230-TB-E C837 R876 4.7k 470 R696 24 O-TU-CE

10p
SV230-TB-E R697

5p
220 10k TP659
10p 47 10V 1k O-TU-DI
CN801 R843 23 O-TU-DI
R827 O-TU-CLK TP660
3P 100k 100k R700

B 4.7k 22 O-TU-CLK
ANTENNA I-TU-ANSD TP661
FM/AM L805 JW802 R704 21 I-TU-ANSD
D805 I-TU-DO TP662
1PS226-115 4.7k (EC79i/EC99i)
TP683 AM 20 I-TU-DO
AM 1 TRACKING C826 R729 TP663
TP684 1000p R701 10k 1k 19 O-FUNC-DATA
GND 2 C840 C821 C822 JW801 TP664
TP690 0.1 TP689 22 C806 R814
TP685 L805 C841 2200p 470p (TUNER-GND) 18 O-FUNC-CLK
C847 1000p 50V 22k R758
FM 3 220uH R702 10k 1k O-POWER TP665
AM RF 0.1 17 O-POWER
L803 Q801 O-SP-RELAY/SW-ON TP666
L804 R840 FM OSC C838 R813 2SC3052F-T1-LF C657 2200p 16 O-SP-RELAY/SW-ON
6 1 FM RF 0 1000p 470k REGULATOR R801 TP667
3 100 15
8.8 CD-R
R846
10 D802
C827
0.047
C805
0.47
C647 2200p
TP668
14 CD-DAC-GND N
C
5 2
1PS226-115 R806 13
47k C666 1000p CD-L PANEL
FL803 C844 O-CD-ON/5V-ON TP669
3.6
I O
0.1 R819 R818
12 O-CD-ON/5V-ON BOARD
33k 10k TP670 CN301
BPF 4 3 C645 1000p I-P-MONI
G
C846
0.01
TP688
R812
47k
R811
100k
C803
1 C857 0.01
C655 220p
11

10
I-P-MONI

D-GND
(Page
I-iPod-DET
9 I-iPod-DET
37)

1 (EC79i/EC99i)
D806 C807 (EC79i/EC99i)
1PS226-115 R844 C649 220p I-5V/9V-DET TP636
2.2k C804 18p 1 EC69i: US, CND/ 8 I-5V/9V-DET
C824 EC79i: US, CND/ O-iPod-RXD
1 EC99i: US, CND C639 2200p 7 O-iPod-RXD
C644 I-iPod-TXD
R817 X801 C640 1 6 I-iPod-TXD
D

1 50V

1 50V
R831 47k 75kHz R787

C650

C656

C646

C665

C648

C658

C652
R847 R823 2200p 50V TP637

1
0 2.2k 10k 15k 5 V-STBY
C828 C636 C654
1 1 4 M-GND
100p R829 R788 TP638
C808 R815 15k 50V
4.7k 18p 3 CD-AVR
10k TP702
TP687 2 9V
1 CD-M-GND
0.9

4.8

4.8

4.8

4.9

4.4

1.7

1.9

1.9

0.5

1.8

2.2

1.5

1.3
11

3
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2
IC801

AGC
VCC2

XOUT
GND

BO2

BO1

PD
FM-OSC

VDD
FM RF-OUT

XIN
LP-OUT
AM-OSC

AM DET-OUT

FM DET-OUT
FM RF-IN

LP-IN

MPX-IN
CN606 (EC69i)
R802 14 13 12 11 10 9 8 7 6 5 4 3 2 1 7P
IC602
AM/FM DET, OSC,
E MIX, PLL, IF AMP 22

TRE-R

CD-R
TRE-L

SEL-R

CD-L

TUNER-R
AM RF-IN

VOL-R

SEL-L

TUNER-L
VOL-L

AUDIO-R
AUDIO-L

iPod-R
iPod-L
1 AUDIO-R

AM IF-IN

P-COMP
C

FM IF-IN

FM-DET
R662
AM-MIX
FM-MIX

IC801

R-OUT
P-DET

L-OUT
GND1

470
VCC1
LV23003VA ELECTRICAL VOLUME, 2 HP-GND
REG

VSS
R804 2W

DO
CE

BASSA-R

BASSB-R
CL

BASSB-L

BASSA-L
INPUT SELECTOR

DI
22
IC B/D 3 HP-L

SDATA
OUT-R
Q802

OUT-L
IC602 JACK

SURR

SCLK
SB-R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

SB-L

GND
VCC
2SC3052F-T1-LF BD3499FV-E2 BOARD

FIL
REGULATOR R808 4 HP-R
22 IC B/D CN497
2.1

2.2

2.4

4.9

4.9

2.2

2.2

3.9

3.8

4.9

2.3

2.3

2.9
4.9 15 16 17 18 19 20 21 22 23 24 25 26 27 28 AMP-ON
(Page
7 5
R675
47 6 SP-RELAY
39)

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

4.2

8.3

3.2

3.2

4.2
R803 7 GND
5.6 2.2k

F
R674
R830 47
R809
C829

C832 C831
0.47

0.47
3.3k JW803 R707
0.47 100 CN605 (EC79i/EC99i)
220 9P

C633

C634

C637

C638
0.047

0.047

0.047

0.047
TP630
C674 1 AUDIO-L
0.022
R706 2 A-GND
R836 TP631
6.8k 220
3 AUDIO-R

B
C848 C833 C845 C802
220 C843 100 R810 R807 R805
0.1 0.1 0.22 4.7k 22k 4 HP-GND
10V 16V 470k TP632
R658 5 HP-L
470 2W TP633 JACK
C830 R749 BOARD

R750

R753
C809 R751 6 HP-R

4.7k

5.6k
2p
G 1000p 5.6k 4.7k TP634 CN496
(Page
7 AMP-ON

1000p

1000p
C817

C816

C815

C814

C810
C811
0.01

0.01
R832 1 2 3 TP635

∗
R845 1M C687 8 SP-RELAY
39)
FL801 C684 C787 C786
0 C685 ∗
I O ∗ ∗ 1 1 9 GND
T801 CF C686
AM IF ∗
I-TU-ANSD
G R816
6 4 1k I-TU-DO
3 4
L802
O-TU-CLK
FM DET

C713
470p
FM O-TU-DI C661 C694 C662 C667
2 CF801 10 1000p 3300p 100
DETECTOR 50V 16V
O-TU-CE R681 R684 R752 R754 R715

H 1 6
R820 4.7k
22k 22k 5.6k 5.6k 100

R821 4.7k
JW804
∗C814, 815
0.01 (EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
R884 4700p (EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS)
0
(EC69i/EC99i) CN633
5P
TP624 D807
LOW-OUT-L 5 1PS226-115

I (Page
J -VH 4
TP623
TP622
JW631 JW633

+VH 3
34) 2CH-4CH AMP
BOARD LOW-OUT-R 2
TP621 JW632
R771
CN102 (EC79i) ∗C684, 686 ∗C685, 687
22k
PA-GND 1
0.068 (EC69i) 0.047 (EC69i)
JW657 R759 R769 0.1 (EC79i/EC99i) 0.068 (EC79i/EC99i) R772 C772
CN603 47 47 22k 1
5P (EC99i) CN653
TP619 11P
TP682

R775
22k
OVERLOAD 5

(Page2CH-4CH AMP
K AMP-STBY 4
TP618

TP617 R779 R777 R783

11
10
PGND

VBUS5V
IN-L 3 4.7k 22k 100k TP706

J 34) BOARD
CN100
A-GND 2 TP615 O-iPod-RXD TP712
9
8
VBUS5V
O-iPod-RXD

8.5

4.1

2.1

2.1
(EC79i) (EC79i/EC99i)
IN-R 1

8 7 6 5
I-iPod-TXD
I-iPod-DET
TP713
TP714
7 I-iPod-TXD A
CN632
IC770 6 I-iPod-DET IP

(Page H
7P - BOARD

V+
TP681 + 5 DGND
HI-OUT-L
LOW-L/SW-OUT
7
6
LINE AMP
IC770
TP715

TP716
4 L+ (Page 39)
34) 2CH-4CH AMP NJM4558V-TE2
+
3 L-
BOARD

V-
-
-VH 5 TP717
CN101 2 R+
+VH 4 1 2 3 4 TP718
(EC99i)
K LOW-R/SW-OUT 3
TP612 1 R-

4.1

2.1

2.1
TP609

(Page HI-OUT-R
PA-GND
2
1
35) 3CH AMP
BOARD C699 C700
CN205 1000p 1000p
R773 C773
22k 1 R785
OVERLOAD 7 100k
R776
AMP-STBY 6 R778 22k

M IN-L 5 C776
22
C775
47 R780
22k R774
22k R784 R786

L C663 100k 100k ET602

R732 25V 10V 1.5k
A-GND 4 1
3CH AMP 100
50V

E
BOARD IN-R 3
CN203 R731 C664
(Page SW-AGND 2
TP691
100 1
50V
(CHASSIS)

35)
(EC99i)
SW-IN 1
CN643
7P
JW613
1

2
3

5
6
7
8
9

10

12
13
14
15

16

17
18
11

M
MAIN MAIN
1
MAIN
BOARD
(2/2) 2 BOARD
(2/2)
3 BOARD
(2/2)

(Page 31) (Page 31) (Page 31)

HCD-EC69i/EC79i/EC99i
30 30
 HCD-EC69i/EC79i/EC99i

6-7. SCHEMATIC DIAGRAM - MAIN Board (2/2) - • See page 40 for IC Block Diagrams.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MAIN BOARD (2/2) 11

10

A 9
2
8

1 4 7 MAIN
BOARD
3 6 (1/2)
MAIN
BOARD
2
R672
10k
2.1 1.9
(Page 30)
(1/2) 1 5
R746 R747 R748 Q608
(Page 30) D702
68 68 68 O-POWER 2SC3052F-T1-LF
STANDBY SWITCH
MA2J1110GLS0 O-SP-RELAY/SW-ON 2.5
B RY701

(EC99i)
L702
R667 (EC99i)
R867 R869 R863 47k R735 R739
R744 3.3k 10k 10k 0 1k
10
C701 R659
0.1 100k Q614 R713
ISA1235AC1TP-1EF R866 100k R880
SUBWOOFER SWITCH 10k D614 1k R730
C702 MA2J1110GLS0 47k

ISA1235AC1TP-1EF
0.1
TB603 9 9
C853

C TP693 R745 2.9 8.3 Q701 - 703, 804 0.1

1.8 Q703

Q613
10 R865 SUBWOOFER BAND-PASS FILTER Q701
SUBWOOFER + 2SC3052F-T1-LF 2SC3052F-T1-LF 9
JW626 47k
IMPEDANCE: 3.1
USE 4Ω - Q704, 705 R862 3.7
RELAY DRIVE 10k 9 1.2
Q704 C705 Q804
0 2SC3052F-T1-LF 0 Q610, 613 2SC3052F-T1-LF 5.3 9
(EC79i/EC99i) R755 R864 R878 10
RELAY DRIVE 4.7k 3.1
R634 R635 R636 4.7k JW637 0 50V 4.5
0.7 2.4 Q702
R608 D603 68 68 68 2SC3052F-T1-LF
10 RY601 MA2J1110GLS0 C710
3.3 C709
R870 R757 0.22
10k 1.8 0.22 3.9
47k R875 R737
0 0
L602 JW600 10k

D Q705 Q604
R736

1.5k
JW760 2SC3052F-T1-LF 2SC3052F-T1-LF R860 (EC69i/EC79i) R666 R721
0 0 10k C711
RELAY DRIVE 10k 1k R881 4.7k 0.22
L601 0.7 0.6 2.2k
R632 Q610

R868
100k 2SC3052F-T1-LF
C604 R643 R645 R861 C630 R712 R714 C708 R882 R740 R734 C712 C707 C706
TB601 C615 R756 R766 10k 2.2k 10k 47 R733 R738 100
R606 0.1 470 56k 0.01 1k 1.5k 1k 1k 0.047 1
0.1 R633 4.7k 10k (EC99i) 10V 100k 50V 16V
TP614 10
+ 100k
SPEAKER R C605 C616
- 0.1 R644
HIGH FREQ. 0.1 1k
IMPEDANCE: TP613
USE 8Ω +
L C606 C603 R607 R631 D605 CN601
- 4700p 4700p 10 R724 R725 R726
10 MA2J1110GLS0 3P
E 15 15 15 14.3 4.7 TP601

R626 Q601
KTA1266 (EC69i) D622
TP602
1

2
VDD+

GND
M M601
(FAN)
10k MAZ8100GMLS0
KTA1273 (EC79i/EC99i)
13.7 3 VDD+
(EC79i/EC99i)
R638 R641 R642
68 68 68 JW757 JW634 R627
Q601, 602
R612 D601 D604 FAN MOTOR DRIVE 4.7k
10 Q603
MC2838-T112-1 RY602 MA2J1110GLS0 2SC3052F-T1-LF
8.9 PROTECT DETECT C601
R609 R610 Q602 R604 3.3
2SC3052F-T1-LF 13.7 50V
4.7k 4.7k R629 100k
4.7k 0
L604 0
F R660 C624
C688
10 12
13.7
22k 220 50V 13
10V Q607 0
L603

3
2SC3052F-T1-LF
R640 PROTECT DETECT ∗R883 14
100k 4.4 56k (EC79i: UK, AUS/EC99i)
TB602 C617 C607 3.9 68k (EC79i: US, CND) 15
(EC69i) R611 0.1 0.1 MAIN
TP626 10 82k (EC69i)
SPEAKER R639 D627 16
IMPEDANCE: + 100k R661 R679 R680 R630
C614 C613 R601 C602 R883 1PS226-115 R603 R605 BOARD
R 4.7 D621 10 470 47 22 22 (1/2)
USE 6Ω C618 C608 22k 22k 22k 47k MAZ8043GMLS0 ∗ 17
- 0.1 0.1 50V 50V 25V

SPEAKER +
TP625 (EC99i) 18 (Page 30)
LOW FREQ. L C610 C609 R711 R647 R615

G IMPEDANCE: - 4700p 4700p 33k 10 10 O-CD-ON/5V-ON

USE 8Ω
Q706
(EC79i/EC99i) KTA1273-Y-AT R767
16.2 5.1 3.3
R710
33k L701 R723
R761 100uH 2.2
470 Q706 - 710
R648 C629 R669 R781 16.2 DC/DC CONVERTER R741
C620 47k R651 R728 4700p 100k 100k
R613 R614 4.7k 4.7k 2.2
100 R646
10V 10k 10k
100 R742
R796 Q707 2.2
R637 R794 330k
IC701
R650 R727 KTA1273-Y-AT
R652 4.7k 10k IC B/D 16.2 5.1 R760
100 4.7k 4.7k
H D602
MC2838-T112-1
D606
MC2836
DC/DC CONVERTER
R762
2.2

IC701 470 C715

C611 Q605, 606 NJM2368V(TE2) R782 0.1
MA2J1110GLS0

0.22 AC DETECT 9 16.2 5.1

10k R798 R768
Q606 4.7k 10k
D791

R620 8.9 16.2 0.7 5.1

2SC3052F-T1-LF 5 V+ OUT 4 R763 R764 R765 R793
4.7k Q605 3.3k 3.3k 3.3k 3.3k
2SC3052F-T1-LF 8.9 8.9 Q710
C612 Q612 0.9 15.2
0 0 6 CS GND 3 0.9 ISA1235AC1TP-1EF
0.22 ISA1235AC1TP-1EF

R621 Q611 0.5 0.5

R791 R670 7 2 C766 R657
4.7k 2SC3052F-T1-LF 8.9 0.9 CT FB R655
100k 10k R797 4700p 68k
0 0 10k
0 0 47k 2.5 0.5
I A001
R617 R616
∗
R618 R619
∗ Q709
C764
10
R795
180k C760
8 REF IN- 1
R770 C763 Q708 R799 C761 C762
10k 10k C695 R649 C696 R792 R628 C619 C765 100k 470p 2SC3052F-T1-LF D701 R656 R673 R688
(CHASSIS) ∗R616, 619 1 220k 10k 0.01 2SC3052F-T1-LF 50V 1000p 100 560 RB055L-40 470 1k 470
3.9k (EC69i) 1 2.2k 16V 470 470
25V 10V
15k (EC79i/EC99i)
(EC69i/EC79i) CN604 R623 R622 R624 R625
8P (EC69i/EC79i) D607 Q611, 612
10k 33k 10k 33k PROTECT DETECT
1N5402-C532-2 D631 MA2J1110GLS0
VH(AC) 8
VL(AC) 7
(EC99i)

O-POWER
I-P-MONI

I-5V/9V-DET
GND 6 D608
D613
D10XB20 1N5402-C532-2 D617
VL(AC) 5
MC2838-T112-1
J PT-SINGLE
BOARD
VH(AC) 4
R687
22k R685
4.7k
CN003 AC DETECT 3
(Page V STBY 2
R678
47k
Q618
ISA1235AC1TP-1EF
4.5

39) RELAY ON/OFF 1

∗C622, 626
R676
PROTECT DETECT
D628
MA2J1110GLS0
Q619
C642 R664
100k
R665
100k
2200 50V (EC69i) 0.022
CN654 3300 63V (EC79i/EC99i) 10k 2SC3052F-T1-LF
(EC99i) 4.5 0 MAIN POWER
10P D609 R690
1N5402-C532-2 2.2k 0 ON/OFF CONTROL R692 R693
C621 C622 D615 4.7k 1k
VH(AC) 10 0.1 ∗ 1N4002-A2 0.7
100V R668
VH(AC) 9 R686 22k
C631 C632 C641 R691
K VL(AC) 8
JW629 (EC69i)
JW630
C628
1000
C627
2200
100
16V
R677
10k
4.7
50V
56k 3.3
50V
R689
27k
10k
CN609
F GND

VL(AC)
7

6
C623
0.1
D610
1N5402-C532-2
C626
∗
D611
1N4002-A2
25V 25V
3P
1 IN D
PT-SINGLE 100V
D612 D630 D629
VH(AC) 5 2 GND REG
BOARD 1N4002-A2 1N4002-A2 1N4002-A2
CN002 VH(AC) 4 3 OUT BOARD
(EC79i/EC99i) W610
(Page
TP629
AC DETECT 3
TP628 (Page 39)
L 39) V STBY 2
TP627
ET601

RELAY ON/OFF 1

E
(CHASSIS)

HCD-EC69i/EC79i/EC99i
31 31
HCD-EC69i/EC79i/EC99i

6-8. PRINTED WIRING BOARD - MAIN Board - • See page 27 for Circuit Boards Location. • : Uses unleaded solder.

• Semiconductor 1 2 3 4 5 6 7 8 9
Location
Ref. No. Location
(EC99i)

D601 E-3 (Page 33) (Page 33)

D602 F-6 A 3CH AMP
M K 2CH-4CH MP
MAIN BOARD BOARD BOARD
D603 E-3 CN203 CN100

D604 G-3
D605 E-5 JW744 L805
(EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
C857
D606 E-6 JW743
TP688
D802
R803 R804 R802
R831 R801
R806
(EC79i/EC99i)
D607 G-5 JW742
R826 C838 JW609

R700
R704
C655
C802 R810
R822 C803
D608 G-5 JW741
C837 R827 JW740 R841 R811 CN603
JW607
R847 C840 TP686
D609 G-5 JW608

C647

C657
R808 4 2
B R843 R838 R837
TP689
D803 Q801 R812 R807 JW679
(EC79i/EC99i)

B E
JW669
D610 G-5 D804 D801 C834 C823 5 1

C645
R696
R697
CN801 R809 B E Q802
TP690 C836 R840 TP619 JW606
(EC99i)
D611 H-6 ANTENNA
FM/AM C835
C851 C819
C820
C826
L803
R825 R824
TP618 C644 C649 C646
JR607
C841
D612 H-6 R708 R709 JW605

7
JW735
TP684 FL803 C847 JR609 C824

JW736
CN643

6
L804 C806 C822 C650 C648 C658
D613 G-6 D806 R667 C640

3
R846 C828 C666
R842 C639 C636 C665 R701
D805 C846 L806 JW802 C821 R823 C656 JR608
D614 C-6 TP683
JW739
R876
R839 R829
C805 R814
D614
TP691 R787 (EC79i/EC99i)
C652 JR605
R729
JW693 TP658
C827 JW734 JW647

1
D615 E-7

2
JW738 JW737 TP687
JW770 R788

1
R819 Q608 B E C654 R758 TP661

JW733
TP685 C844 TP659
JW731 R813
D617 E-6

JR603
R818 R816

R702
M601 JW730 JW801 TP617 TP615
M JW729 R844
R817 X801 C804 R681 14 1 JW751 TP660

JW613
(FAN)

JW645
(EC69i) JR619
D621 D-5 C
R666 R684
IC602

25
JW728 36 19 JR620

R805
JW656

C633

24
C661
D622 D-5
LP001
C807
IC801 C808 C809
C810 C811 C634
15 28
C667
1 18

C699
R732
R731
C700
C630 C637 CN607
JW726 R845 R815

C684
R751
C674
D627 D-4 TB603
C848 T801 JW725
R820 R672
C638
C662 C694
JR610
TP662
JR601 C845 JW625 TP663
D628 E-7 TP693 R832 C843 C707 C663 C664
TP664

JW721
R821 C685 R749 TP665
+ C817 C815 JW758 JW713
R752
D629 H-6 FL801 R753

JR602
SUBWOOFER JW724 R830 C816 TP666
C814 R738 R750 R715 C713
IMPEDANCE: R836 L802 JW637 C711 R754 C687 TP667
D630 H-6 USE 4: – C830
JW804
R884
C686 JW715 JW627
JW620
D631 D-7 JW626
JW803 C832
C831 R725
JW706
R737
R707
R706
JW617 JW628 TP668 N
R724 JW716 R736 C712 R676 TP669 PANEL
D701 H-8 C829 Q804 Q701 JW768

JW723
JW722
CF801 C833 R735 R721 TP670 BOARD
R726 Q703 E B B E B E
(EC99i) B E
D702 E-4 D R629 Q702
JW769
JW681
CN301
Q601 C614 R878 R881
C853
C709 C710 R734 JW718 TP637 (Page 36)

R882
R740
D791 E-5 D807 1
CN601
3
Q602
R601 R630
JW638
R714
JW692 TP636
B E E B TP638
D801 B-4 C705 R733

2
(EC69i/EC99i) D627 D621 JW678
TP602 TP601

1
R712
(Page 33) R687 D631

C708
L702 R745 D622
D802 B-4 JW644 R627 (EC79i/EC99i)
C706 R677 JW771 TP702 JW712

R713
R880
R730
2CH-4CH AMP C688 JW689 JW634 R739
R744 C613 JW619
D803 B-4 BOARD
CN102
J R607 C605
C702 C601
R605 Q603
R626 Q611
JR614
R670 R689
R685 Q618 C632
JW615
R664
B E

JW643
D804 B-3

JW702
JW621 C604 E B D628
L601 R604 C641
JW622 R603

JW649
C602 R883 B E R637
C701 R690
D805 C-2 JW677 R678 C787 C786

R606
C603 RY701 C619 R669 B E R759 R784 R783
R693 JR618

JW705 D617
LP003 CN653
D806 B-2 TB601 TP682 (EC69i/EC99i) JR600 C629 Q612 R769 TP715

JW642
R632 5 1
CN633 D791 R628 (EC79i/EC99i) JW754 TP718 2 1

JW701
TP613
E
R686
D807 D-3 + JW668
RY601 R633
TP624 TP623 R791
D605
Q606 Q605
B E B E
JW685 JW635
R785 TP716
R R746 D702 JW650
R659 R692 JR615 JW655 C772 A

JW757
JW648
JW653
JW717 L602 R631 (EC99i) R771 JW699
C696 C695 D606

(EC79i)
– D601 JW623 TP717 IP BOARD
R775
IC602 C-7 SPEAKER R608 JW727 JW714
(Page 38)

JW631
R772
JW676
IC770

TP609
JW766 R646
HIGH FREQ. TP622 (EC79i) R792
IC701 G-8 JW680

JW657
R652 JW763 D615 TP714
IMPEDANCE: + R747 C616 TP621 JW632
C615 R658 R614 8 5 TP713
USE 8: 10
IC770 E-8 L
TP614
C606 D603 R613 JW662
R779
C776
1 4 R777 11 TP712
– TP681 JW695 R786
IC801 C-4 JW682 7 1
R662 TP706
JW618

JW600
JW760
CN632 D602
(EC79i/EC99i) C631 R665
(EC99i) R773 JW756

JW672
(EC99i) JW633 (EC79i/EC99i) JW764 C612 Q607 C624 C775

R748
TP612 JW746 C773
(EC79i) Q704 B E JW686
Q601 D-4 (Page 33) JW664 JW765 R621 JR617 E B R778 R668

R776

R774
R609 JW610 R660 CN609
R756
Q602 D-5 F JW641 C611 R680 R661 R780

R634
2CH-4CH AMP R639 JW604 TP631
BOARD H R640 R755 R679 3 1

JW720
JW654

JW652
JW646
JW719
JW708
R620

JW616
Q603 E-5 CN101
JW683
JW601 (EC79i/EC99i)

Q604 G-3 3CH AMP R636 JW603 R863 R862 R616 R618 R624
JW762 JW700 D
BOARD L Q613 Q610 R727 C621
(EC99i)
JW761 JW707 R794
TP634
REG
Q605 E-6

R869
CN205 CN654 (EC69i/EC79i) TP630 BOARD
R635 R622

Q606 E-6 (Page 33) (EC99i) Q705 B E E B B E R650 (EC99i)

CN604
JW694 E B Q709 JW673 W610

10
L603
R757 R861
R651 JW639 R797
C765 C764
R781 (Page 38)

8
Q607 F-7 R796 CN605 9P (EC79i/EC99i)

R766
(EC69i) TB602

R870
(EC99i) R611 R728
R711 R710 JW658 R860 CN606 7P (EC69i)
JW602 R864 D608 C623 8 5
Q608 C-6 TP632

-
+ Q614 R795 R675 R674
SPEAKER A001 JW651 (EC79i/EC99i)
IMPEDANCE: R867 (EC69i/EC79i) 1
Q610 F-4 USE 6:
R TP625 JW636 B E R875
R648 R782 JW667 TP633
2
IC701
Q611 E-5 G – C610 R610 C617

C618 RY602 D604

R638
R865 C626
D610

D613
C766
C763 1 4 R764 2
1 (EC69i)
(EC79i/EC99i)
C609
Q612 E-6
R866 R656 R657 R763 R762
B

R641

JW611
+ D607 R770 R793 R761 JW698
JW640

SPEAKER C607
JW661

R625 R655 Q707 Q706 JACK BOARD

Q613 F-4 LOW FREQ. R649 R799
E B R798 R765 (EC69i)

B
L R642 6 7 CN496

TP629
IMPEDANCE: JW665
Q614 G-4 – D609
R619 8 9 (Page 38)

1
USE 8: R647 Q708

+
C608 Q604 B E R868 TP628 D701 TP635
(EC99i) TP627 (EC79i/EC99i)
Q618 E-7

1
C620 JW773
C

E
(EC79i/EC99i) R643 (EC99i) (EC69i/EC79i) L701
C642 B E Q619
Q619 H-7 R645 JW614 C760 JACK BOARD
R691 C761 CN497
Q701 D-6 R615
C622
JW684 JW690 (EC69i)
D612 JW624
JW670 BE R673 (Page 38)
C715
Q702 D-7 JW660 JW745 JW630 JW629 R623 C762 (EC69i)

H JW772 Q710
JW704

Q703 D-6 TP626 D611

R617
JW696
JW671 R688
JW748

R767
R723
R741
R742
R760
R768
Q704 F-4 R612
JW687
D630 D629
JW663 JW710 R644
LP004 11, 12
L604 JW612
Q705 F-4 C628 C627 1-878-453- (11, 12)

Q706 G-8 ET601 ET602

(EC79i/EC99i)
Q707 G-8
Q708 G-8
Q709 F-8 PT-SINGLE PT-SINGLE
Q710 H-8 F BOARD BOARD G
I RY601, 602, 701 (CHASSIS) (CHASSIS) CN002 CN003 (CHASSIS)

Q801 B-5 (Page 38) (Page 38)

Q802 B-5 (EC99i) (EC69i/EC79i)

Q804 D-6

HCD-EC69i/EC79i/EC99i
32 32
 HCD-EC69i/EC79i/EC99i

6-9. PRINTED WIRING BOARDS - AMP Section - • See page 27 for Circuit Boards Location. • : Uses unleaded solder.

• Semiconductor
1 2 3 4 5 Location
Ref. No. Location
D140 C-2
D141 B-3
D152 B-1
2CH-4CH AMP BOARD D201
D202
E-4
D-1
D203 E-2
A (EC79i) (EC69i) (EC99i)
C152
Q152 23
(EC79i)
15 IC101 IC102 IC103 1 (EC79i) IC101
IC102
A-3
A-3
R154 R152
EB C125 C106 C160 R166 JW109 IC103 A-3
C126 C105 C164 IC201 D-3
TP107
R156 R129 R109 JW105

TP106
R131 R130
C104 JR103 TP105 R160 CN102 (EC69i/EC99i) Q141 B-3
D152

R110
R132 JR102
C124 C123 Q142 B-3

7
R153 R111 R164
R128 R127 R108 C111 JR101 R112 R162 Q151 B-1

5
C128 R119 C165
C141 R141
TP104 J Q152 A-2
JW110

Q151 R134 JW112 JW103 Q201 E-4

CN101
C127 JW106 R107
R136 R133 C161 (EC79i) MAIN BOARD Q202 E-3
E B JW102 JW104
R151 C102 R167 CN633 Q203 D-1

TP102
C101 R165 Q141 (Page 32)
C151 R135 R145 TP103
R155 JW107 R163 B E

1
R123 R125
B C119 C121 R106 Q142

1
TP110 R161 R142 R146
C122 C108
C120 C103 C107 B E C166
TP112 R124 R116 C142
R105 R113 C112 TP101
5 R126 JW108 R114 C163
R115

R143
4 C167
R144
CN100 C110 C109 C162
K TP111 C130
2
C129
D141
1-878-459-

TP109 (EC69i/EC99i)
MAIN BOARD 1 R104 R103 R120
JW101 A101 11, 12
CN603 TP108 D140
(Page 32) JW111 (EC69i/EC79i) A102 (11, 12)

MAIN BOARD
CN632 H
C (EC79i)
(Page 32)

(EC99i)
3CH AMP BOARD
R242 JW204 JW212
E B C227 19 C206 C205 1 TP206 TP203
D202 Q203

D R240 C213
R246 R245
IC201 R228 R226 CN205

R241 R239 JW205 R223 JW209 R244 R207

C228 JW201 C224 TP207
TP205

C229 R230 7
R238 C212 C204 C203 C230
R218 R206 R225 R229
R208

R237 TP204 JW202

R227
C215 C202
JW210 R231 TP202 L
C216

C211 C201
R221
TP209 C223 C225
R222 JW208 MAIN BOARD
R220 C214 R204 R203 R205
TP214 R219 CN632
JW211 C226 E B Q201 1
R216 R232 (Page 32)
R233
7

TP211 JR202 Q202 E B

6

TP213 R217 R210 R209

TP212

JW207

R234 D201C220
M C219
JW206

C218 A201
TP201

JR201 C208 C207 R213 R235

E MAIN BOARD C217
2

C209
TP210

CN643 R214 C210 JW203 R236

1

D203
(Page 32)
CN203 TP208 11, 12
1-878-460- (11, 12)

HCD-EC69i/EC79i/EC99i
33 33
 HCD-EC69i/EC79i/EC99i

6-10. SCHEMATIC DIAGRAM - 2CH-4CH AMP Board -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2CH-4CH AMP BOARD

A (EC99i) (EC79i) (EC69i)

ST-BY
ST-BY

ST-BY
+VCC
+VCC

+VCC
-VCC
-VCC

-PRE

-VCC
-PRE

-PRE
IC103 IC101 IC102
STK433-090-E +PRE SUB GND STK433-890-E +PRE SUB GND STK433-040 +PRE SUB GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

IC103 IC101 IC102

-39.8

-41.7

41.2

39.8
-39.8

-41.7

41.2

39.8

0.7
0.7

-39.8

-41.7

41.2

39.8

0.7
0

0
0

0
POWER AMP POWER AMP POWER AMP
B
R111 R112 C105 C106 C125 C126 R131 R132
0.22 0.22 100p 100p 100p 100p 0.22 0.22
2W 2W 2W 2W

D
(EC79i)
R153 R151
22k 1.2k
-0.8 0

R129

R130
R110
R109

470

470

470
R155 470
D152 2.2k C151
MC2838-T112-1 0.1
Q151
2SA2026 0

E R154
22k
-0.8 0
R152
1.2k
C107 C127
R156 3p 3p
2.2k C152
0.1 JW110
Q152 R113 R133
2SA2026 0 47k 47k

R143 R141 R114 R135 R134

22k 1.2k 47k 1.5k 47k
-0.8 0
C108 C128
F R145 3p R116
D141 2.2k C141 1.5k 3p
MC2838-T112-1 0.1
Q141 R115 R136
2SA2026 0
1.5k 1.5k

R144 C129
R142 1
22k 1.2k
50V
-0.8 0 C109 C110 C130
47 47 1
R146 25V 25V 50V
2.2k C142
0.1
Q142
2SA2026 0 R119 C111
100 4700p

G (EC79i) CN101
7P
Q141, 142, 151, 152
OVER LOAD DETECT R160 R161
C103
470p
C104
470p
C123
470p
C124
470p
TP107
220 220

H
HI-OUT-L 7
TP106
LOW-L/SW-OUT 6 R107 R108 R127 R128
TP105 R162 R163 47k 47k 47k 47k
MAIN -VH 5 220 220
BOARD TP104 C121
C101 C102 C122
(1/2) +VH 4 1 1 1 1
TP103 R164 R165
CN632 220 220 50V 50V 50V 50V
LOW-R/SW-OUT 3
(Page HI-OUT-R 2
TP102
R166 R167
(EC79i)
∗R105, 106
R105 R106 R125 R126
∗
30) PA-GND 1
TP101 JW109
220 220 2.2k (EC69i)
∗ 4.7k 4.7k

H C160 C161
4.7k (EC79i/EC99i)
R103
∗
R104 R123
820
R124
∗ 820
0.1 0.1
(EC69i/EC99i) CN102
5P D140 ∗C162, 163
MA2J1110GLS0 100 50V (EC69i) C164 C165 R120 C119 C120 C112 CN100
LOW-OUT-L 5 0.1 0.1 1k 0.01 0.01 0.1 5P
220 63V (EC79i)
J -VH 4
100 63V (EC99i) ∗R103, 104
TP112
5 IN-R

MAIN +VH 3
C162 C167 C166 C163
2.2k (EC69i)
820 (EC79i)
1.2k (EC99i)
TP111
TP110
4 A-GND K
BOARD ∗ 10 10 (EC79i) ∗
I
LOW-OUT-R 2 3 IN-L MAIN
(1/2) 63V 63V TP109
CN633 PA-GND 1 2 AMP-STBY BOARD
TP108 (1/2)
1 OVERLOAD CN603
(Page 30) (Page 30)

HCD-EC69i/EC79i/EC99i
34 34
 HCD-EC69i/EC79i/EC99i

6-11. SCHEMATIC DIAGRAM - 3CH AMP Board (EC99i) -

1 2 3 4 5 6 7 8 9 10 11

3CH AMP BOARD

IC201
A POWER AMP

ST-BY
+VCC
IC201

-VCC
-PRE
STK433-330-E
+PRE SUB GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

-39.8

-41.7

41.2

39.8

0.7
0

0
D202
MA2J1110GLS0 Q201 - 203
OVER LOAD DETECT

R241 R240 R239

2.2k 22k 1.5k
B -0.8 0

R238
R242 C227
1.5k 0.47
0.1 2W
Q203
2SA2026 0

R235 R233 R231 R229 R230 C205 C206 C213

2.2k 22k 1.2k 0.22 0.22 100p 100p 100p
-0.8 0 2W 2W R237
0.47 R221 C215
D201 2W 47k 3p
MC2838-T112-1 C225
0.1
Q201
2SA2026 0
C R244
0
R236 R234 R232
2.2k 22k 1.2k
-0.8 0
R226 R225 R246 R219
220 220 C203 C204 470 1k C212
C226 470p 470p 470p
0.1
Q202 R228 R227 R245
2SA2026 0 220 220 R207 R208 R218
470
47k 47k 47k

C224 C223
0.1 0.1 C201 C202 R220 C211

D 1 1 470 1
50V 50V 50V
C230 C229
0.1 0.1 R205 R206
4.7k 4.7k

R217
C209 R213 R209 R203 R204 R210 R214 C210 22k
D203 3p 47k 1.5k 1.2k 1.2k 1.5k 47k 3p
CN205 MA2J1110GLS0
7P
TP207 R216
220
HI-OUT-L 7
TP206

L
LOW-L/SW-OUT 6
TP205 CN203
7P
E MAIN
-VH
+VH
5
4
TP204
C207
1
50V
C217
0.01
C218
0.01
C208
1
50V
C214
47
TP214
7 SW-IN
BOARD TP203 25V TP213
(1/2)
M
LOW-R/SW-OUT 3 C220 6 SW-AGND
TP202 C219 TP212
CN632 100 100 R222 C228 C216
HI-OUT-R 2 63V 0.1 5 IN-R
(Page 30) TP201 63V 100 4700p TP211
PA-GND 1 4 A-GND MAIN
R223
TP210 BOARD
1k
3 IN-L (1/2)
TP209
CN643
F TP208
2

1
AMP-STBY

OVERLOAD
(Page 30)

HCD-EC69i/EC79i/EC99i
35 35
HCD-EC69i/EC79i/EC99i
Ver. 1.1

6-12. PRINTED WIRING BOARDS - PANEL Section - • See page 27 for Circuit Boards Location. • : Uses unleaded solder.

• Semiconductor 1 2 3 4 5 6 7
Location
Ref. No. Location
D301 E-6 PANEL BOARD
D302 E-6
D303 E-6 A
TP375
D304 C-5 JW345
D305 B-1 (EC79i: UK, AUS/EC99i)
D306 F-2 37
LCD301 1 R381
3 1 TP378
TP373 SW301
TP372
D307 F-2 D305
LIQUID CRYSTAL DISPLAY
JW301 TP379
TP371 

R380
C313
D618 E-4 (STANDBY) TP374
Q301 JW322 JW306 IC302
D619 E-4 JW308 TP380
X302 C341
D620 E-3

JW315
B E C342
C340 TP376
R328 R337 R402

JW346
R327 JW307

JW310
JW325
R309 R384

81
B

JW323
80
IC301 B-4 R308 R303 JW355
IC302 B-5 (EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS) R302

TP377

JW314
JW331
IC303 F-2
JW351
R363 R362 JW330 IC301 R301 R401
R382

00
JW357 C354 JW363 (EC99i)

11
(EC79i: UK, AUS/EC99i) CN302

JW341
C353 JW368 C355 SW318
R400 JW337
Q301 B-1 SUBWOOFER

50 51
R369 C317

JW342
(EC79i/EC99i) JW344 ON/OFF

5
Q302 E-6 R370 R305

4
2 CN306 JW365 R390
LOADING R389 JW343
Q303 E-6 BOARD 1
JW339
C319 X301 JW309 JW338
C320

R392
R421
Q304 F-6 R418

30
R391

31
2
JW302 R396 C321 R387

1
Q305 E-6 JW312
C338
(EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS) JW324
R315 (EC69i: US, CND, AUS/EC79i: US,
R326 R433 CND, AUS/EC99i: US, CND, AUS)
Q306 E-6 SW351 (EC79i: UK, AUS/EC99i) C330
Q307 E-2 C CD LID
OPEN/CLOSE JW371
JW317
JW318 C332
C336
R313
R318 R319
Q622 E-4 DETECT
JW305 R420 R304
(EC69i/EC79i: US, CND) R320 R419
Q624 F-4 JW349 R321
R310
R386
R307
JW350 D304 R383
JW326 R312 JW333
R317 R306 (EC79i: UK, AUS/EC99i)
JW328 JW334 R385

R434
R324
R322
R323
R445 JW311 R450
R448 R422
R314
TP361 SW317 SW302
TP343 TP339
(EC79i: UK, AUS/EC99i) FUNCTION SW303 DISPLAY
R325 TP341 JW367
TP337 
TP362 JW336 SW316
D TP331 JW319
JW360 JW347
EQ (EC79i: UK, AUS/EC99i)

JW370

JW374

JW369
JW356

JW373
CN608 (EC69i/EC79i: US, CND) JW372 SW316
JW332 FUNCTION
TP332 C675 (EC69i/EC79i: US, CND)
TP333

1
JW352

2
C305 JW364
TP334

R449
R417
R416
R412
JW335
C306
C676 TP336
TP335 JW327 (EC79i: UK, AUS/EC99i)
P JW378
TP338 TP342
JW313
D303

CD BOARD R334
CN201 TP340 TP344
JW361 C671 TP307
R335 C303
(Page 28) TP346 TP350
JW375
TP348
D620
R336
SW315
C703 R720
TP347 JW340
E –

20
R716 R452

21
C673 E B
C669
Q303

R333
Q622 C304
C434 JW316 Q306 Q305
(EC79i: UK, AUS/EC99i)
TP349 E B B E Q302

JW359
JW377 JW376 D619 R719 R722 TP301 B E B E R332
R376 R377 JW303
R311 TP311 JW362 R331
TP363 3 1 R717 D618
Q307 R329

R330
TP315 D302 D301
B E TP305

R446
E B R378 R415
S301 R718 TP313 JW358
ROTARY ENCODER R379 Q624 Q304 B E C301

R444
R447 C302
VOLUME TP321 TP319
JW304
E 1 3 TP323 C704

JW354

JW321
JW329
TP312 TP309 TP308 TP304
KEY BOARD
CN313
IC303 CN303 SW314

F (Page 38) 9 1
JW353 24 2
TP314 V

D306 TP324 25 1 TP302

TP316
C357 TP310 TP306
R442 D307 TP320 TP317
JW366 TP322 TP303 TP318
C352 CN301
JW320 R441 R414
C351 R443

SW301 – 303, R413

MAIN SW313
SW313 – 318
N BOARD
CN607
– TUNING
M
N

(Page 32)

11, 12
1-878-455- (11, 12)

Note: When the LOADING board is damaged, exchange the

entire CDM76A Assy (EC79i: UK, Australian/EC99i).

HCD-EC69i/EC79i/EC99i
36 36
 HCD-EC69i/EC79i/EC99i
Ver. 1.1

6-13. SCHEMATIC DIAGRAM - PANEL Section - • See page 40 for Waveforms. • See page 40 for IC Block Diagrams. • See page 42 for IC Pin Function Description.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PANEL BOARD LCD301

LIQUID CRYSTAL DISPLAY

A CN301
25P

SEG32

SEG31

SEG30
SEG29

SEG28
SEG27
SEG26

SEG25

SEG24

SEG23
SEG22

SEG21
SEG20
SEG19

SEG18
SEG17

SEG16
X302
NC 1 6MHz
TP301 R301 100 O-TU-CE
O-TU-CE 2
TP302 R302 100 O-TU-DI
O-TU-DI 3

O-TU-CLK 4
TP303
TP304
R303

R304
100

100
O-TU-CLK
22
I-TU-ANSD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
I-TU-ANSD 5
TP305 R305 100 I-TU-DO
I-TU-DO 6

SEG10

SEG12

SEG13
SEG14
SEG15

SEG16
SEG17
SEG18

SEG19
SEG20
SEG21
SEG22

SEG23
SEG24

SEG25
SEG26

SEG27
SEG28

SEG29
SEG30

SEG31
SEG32
SEG11
COM0

COM1
COM2
COM3

SEG0
SEG1
SEG2
SEG3
SEG4

SEG5
SEG6

SEG7
SEG8
SEG9
TP306 R306 100
B
O-AUDIO-DATA
O-FUNC-DATA 7 C320 C319
TP307 R307 100 O-AUDIO-CLK 22p 18p
O-FUNC-CLK 8 X301
TP308 R308 100 O-POWER 32.768kHz
O-POWER 9 Q302 C306
TP309 R309 100 O-SP-RELAY R396
KTA1271Y-AT R336 470
O-SP-RELAY/O-TP-ON 10 330k

1.3

1.3
1.3

1.3
1.3

1.3

1.3
1.4

1.5

3.2
1.3

1.3
1.3

1.3
1.3

1.3
1.3

1.3
1.3
TP310 10k 6.3V
8.2 4 D303 EC69i: UK, AUS/
CD-R 11 EC79i: UK, AUS/
N TP311 MC2836 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
O-LED R329 R331 EC99i: UK, AUS
CD-DAC-GND 12 R449
TP312 2.2k 100k 47 C354

VCC
SEG31

SEG30

SEG29

SEG28

SEG27
SEG26

SEG25

SEG24

SEG23

SEG22
SEG21

SEG20

SEG19

SEG18
SEG17

SEG16
VSS
X0

X1
R325 R328 7.5 4700p
MAIN CD-L 13 10
TP313 R311 100 5V-ON 10k
BOARD O-CD-ON/5V-ON 14 R334 1.3 1.3 SEG15
(1/2) TP314 R310 100 I-P-MONI R326 R332 3.3k 1 SEG32 SEG15 80
100 Q302, 303 10k
CN607
C
I-P-MONI 15 +4V REGULATOR O-SP-RELAY 3.2 1.3 SEG14
TP315 R337 2 O-SP-RELAY-ON/TC ON/SW ON SEG14 79
(Page 30) D-GND 16
TP316 R315 100 I-iPod-DET R327 6
R335
220 I-RST O-POWER 3.2
3 O-POWER SEG13 78
1.3 SEG13
100 4.6 22k C305 1.3
I-iPod-DET 17 I-HOLD
10
O-CD-ON 0 SEG12
TP317 R313 100 I-5V/9V-DET 4 O-CD-ON SEG12 77
I-5V/9V-DET 18 50V CDM-CLOSE 0 1.3 SEG11
TP318 R312 100 Q303 5 76
O-iPod-RXD 2SC3052F-T1-LF I-CDM-CLOSE SEG11
O-iPod-RXD 19 D305 4 1.3 SEG10
TP319 R314 100 1L0341Y23E0CA602 R450 C355 6 75
I-iPod-TXD 4700p NC SEG10
I-iPod-TXD 20 (EC69i/EC79i: US, CND) D301 Q304, 305 1.2k CDM-OPEN 3.2 1.3 SEG9
TP320 SELG2WA10C LF62 MAZ8043GMLS0 VOLTAGE DETECT 7 I-CDM-OPEN/CDM-OPEN_CLOSE SEG9 74
V-STBY 21 (EC79i: UK, AUS/EC99i) R333 CDM-M+ 3.3 1.3 SEG8
TP321 100k R452 C330 8 O-CDM-M+/NC SEG8 73
(STANDBY) 3.2 0.1
M-GND 22 33k I-RMC 3 1.3 SEG7
TP322 C304 9 72
I-RMC SEG7
D CD-AVR 23 0.1 CDM-M- 0 1.3 SEG6
0 Q306
TP323 C301 RT1N441C-TP-1 10 O-CDM-M-/NC SEG6 71
9V 24 0 0.1 0 3.2 RESET SWITCH 5V-ON 0 1.3 SEG5
TP324 C317 11 5V-ON 70
1000p SEG5
CD-M-GND 25 0.7 0.7 0 1.3 SEG4
12 NC SEG4 69
Q301
2SC3052F-T1-LF
C302
100
R330
680
Q304
2SC3052F-T1-LF
C303
10
Q305
2SC3052F-T1-LF
D302
MA2J1110GLS0
1
1.6
13 XOA IC301 SEG3 68
1.3

1.3
SEG3
SEG2
LED DRIVE 10V 50V 14 X1A SYSTEM CONTROLLER SEG2 67

21 3.2
15 VCC IC301
MB90F830PF-GE1
VSS 66
3.2
16 VSS VCC 65
I/O-BUS0 0 1.3 SEG1
17 I/O-CD-BUS0 SEG1 64

E
I/O-BUS1 0 1.3 SEG0
CN608 18 I/O-CD-BUS1 SEG0 63
21P C704 I/O-BUS2 1.3 COM3
R716 0
TP331 3.3 7.2 470p 19 I/O-CD-BUS2 CMO3 62
AVDD (3.3V) 1 1k I/O-BUS3 1.3 COM2
0
TP332 20 I/O-CD-BUS3 CMO2 61
R-OUT 2 Q624 R717 1.3 COM1
TP333 C675 1 50V 68 21 NC COM1 60
KTC3203Y-AT
DACGND 3 4 1.3 COM0
TP334 22 NC COM0 59
L-OUT 4 R718 O-DR-MUTE 0 (3.2) 2.6
TP335 C676 1 50V 68 23 O-DR-MUTE VLCD 58
AGND 5 Q622, 624 I-REQ 0 0 O-TU-CLK
TP336 R317 100 O-CD-RST R722 +3.3V REGULATOR 24 I-REQ O-TU-CLK 57
RST 6 100 R719 O-CD-BUCK 3.2 0 O-TU-DI
TP337 R318 100 68 25 O-CD-BUCK 56
F
I/O-BUS0 O-TU-DI
BUS0 7 O-CD-CCE 3.2 0 O-TU-CE
TP338 R319 100 I/O-BUS1 26 O-CD-CCE O-TU-CE 55
BUS1 8 4 O-CD-RST 3.2 3.2 I-RST
TP339 R320 100 I/O-BUS2 R720 27 O-CD-RST I-RST 54
BUS2 9 0 22k O-CD-ON O-LED 3.2 3.2

I-KEY-WAKE-UP/VOL
TP340 R321 100 C703 C671 D618 C669 28 O-LED 53
I/O-BUS3 100 MD0
BUS3 10 2200p MAZ8039GHLS0 220 I-iPod-TXD 3.2 3.2
TP341 R322 100 16V 10V Q622 29 I-iPod-TXD 52

O-AUDIO-DATA
O-CD-BUCK MD1

O-AUDIO-CLK
BUCK 11 2SC3052F-T1-LF 0
CD

I-5V/9V-DET
O-iPod-RXD

O-CD-SBSY
TP342 R323 100 30 SCLK 51

I-TU-ANSD
O-CD-CCE MD2

I-iPod-DET
BOARD

I-P-MONI

I-MODEL
I-SUFFIX
CCE 12

I-TU-DO
I-HOLD
CN201

I-KEY1

I-KEY2
TP343 R324 100 I-REQ

AVCC

AVSS

GND
(Page 29) REQ 13
D620 D619
R448

NC
NC
TP344 R433 100 O-CD-SBSY 10k
1N4002-A2 1N4002-A2 C342
SBSY 14
TP346
C673 IC303 1000p 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

0.1
DGND 15

1k
470 10V
MOTOR DRIVER

3.2

3.2
3.2

3.2

1.5
3.2

3.2
0.6

2.1
2.3

3.1

3.2

0.6

3.2
2.9
0
C321
VREF

OUT2

OUT1

D-OUT 16
GND
VCC
RNF

C340
R400
IC303 0.1
RIN
TP347
FIN
VM

BA6956AN R362 R363

DVDD (3.3V) 17
TP348 22k 22k R369 R402 R401
VM (7V) 18 1 2 3 4 5 6 7 8 9
IC B/D 1k CDM-CLOSE C341 100k 1k
TP349 0.1
D307
MGND 19 MA2J1110GLS0
4.4

5.2

7.5

7.5

2.6

2.6

TP350 O-DR-MUTE R370

1k
CD DRIVE MUTE 20 CDM-OPEN
R434 R441
ZDET 21 100 10k R445

(EC79i/EC99i)
C434 4.7k JW302 R380 R390 R392 EC69i: US, CND, AUS/ R421
0.01 CDM-M- 470 10k 10k 10k
EC79i: US, CND, AUS/

H
R442 EC99i: US, CND, AUS

D304 MA2J1110GLS0
22k R444

27k
4.7k JW312 CDM-M+
(EC79i: UK, AUS/EC99i) JW376

I-KEY-WAKE-UP/VOL
R419
CN302
5P

O-AUDIO-DATA
C353

O-AUDIO-CLK
R447 4.4
0.1

I-5V/9V-DET
O-iPod-RXD

O-CD-SBSY
M+ 5 JW377 15k

I-iPod-DET
I-TU-ANSD
I-P-MONI

I-MODEL
I-MODEL

I-SUFFX

I-SUFFX
I-TU-DO
M- 4 3.1

I-HOLD
I-KEY1
I-KEY2
D306
LOADING 1N4002-A2
BOARD OPEN SW 3 C357 R446
R443 C352 C351
22 120k Q307
CLOSE SW 2 10k 10 0.1
50V 50V RT1N441C-TP-1
MOTOR VREF

I-RMC
I
DGND 1
CONTROL
∗R391
R389 R391 R420 C332 C338 C336
SW351 ∗ ∗ 1k (EC69i: UK/EC79i: UK/EC99i: UK) 100k 0.01 1000p 0.1
CD LID 2.2k (EC69i: AUS/EC79i: AUS/EC99i: AUS)
OPEN/CLOSE CN306
DETECT 2P
EC69i: UK, AUS/
GND 1 EC79i: UK, AUS/EC99i: UK, AUS
R384 R383 R382 R376 R377 R381
CD-OPEN/CLOSE 2 10k 10k
10k 10k 10k 10k ∗R389
(EC69i/EC79i: US, CND) I-KEY-WAKE-UP/VOL
1k (EC69i/EC79i: UK, AUS)
R385 R422 R379 2.2k (EC99i)
CN303 3.9k (EC79i: US, CND)
3P 1k 4.7k 68k

J E KEY1 1
TP361
TP362 I-KEY2
IC302
KEY KEY2 2 REMOTE CONTROL RECEIVER
TP363 R387 R378
BOARD GND 3 1k 33k IC302
CN313 NJL23H400A

(Page 39) (EC99i) (EC79i: UK, AUS/EC99i)

I-KEY1
(EC79i: UK, AUS/EC99i)

3 1 3
R418 R417 R416 R415 R414 R413 R412 R386 VCC
15k 6.8k 3.9k 2.7k 2.2k 1.5k 1.2k 1k 1 3
OUT
3
GND
2
2 C313
0.22
K
SW318 SW317 SW316 SW315 SW314 SW313 SW301 SW303 SW302 S301
DISPLAY ROTARY ENCODER
SUBWOOFER FUNCTION EQ - - TUNING / / VOLUME
ON/OFF
(EC79i: UK, AUS/EC99i)
(EC69i/EC79i: US, CND)
FUNCTION
(EC69i/EC79i: US, CND)

Note: When the LOADING board is damaged, exchange the

entire CDM76A Assy (EC79i: UK, Australian/EC99i).

HCD-EC69i/EC79i/EC99i
37 37
HCD-EC69i/EC79i/EC99i
Ver. 1.1

6-14. PRINTED WIRING BOARDS - AUDIO IN/OUT, KEY, POWER SUPPLY Section - • See page 27 for Circuit Boards Location. • : Uses unleaded solder.

• Semiconductor 1 2 3 4 5 6 7 8 9 10 11 12
Location
Ref. No. Location
REG BOARD KEY BOARD IP BOARD (SIDE A) IP BOARD (SIDE B)
D001 F-8
A IC601

R909
R908
R910

R907
R906
R905
D002 F-8 W610 TP905 TP918
TP919
TP920
D003 F-8 3 3 TP917
TP921

R913
C904
TP903
D491 C-2 D C698 (EC79i: UK, AUS/EC99i) SW311, 321 – 326 C903
TP904
TP907
R911
R912
1
MAIN BOARD 1 TP908 TP901 TP909
D901 B-7 CN609 11, 12
SW326
TP910
1 30

TP902
CN902 TP924

TP912
(Page 32)
;
D902 C-10 1-878-454- (11, 12) (iPod Dock)

D906 C-9 TP913 TP911 TP906 TP925

IC601 A-2 JACK BOARD R408 (EC79i/EC99i)

B R917
TP914 TP915 TP916
C909 R914
J492
D901
PHONES R920

C907
R901
C908
R902
(EC79i/EC99i) J491
PC IN
R903 TP922

11 1 R904 TP923

TP494
C496
C495
R492
JW491 R491 (EC79i/EC99i)

TP492
C D491 TP491 1-878-463- 11, 21
A
D906
K A
D902
K
1-878-463- 11, 21
(11, 21) (11, 21)
TP497
CN496 9P (EC79i/EC99i) D902, 906
TP498 TP495 CN497 7P (EC69i) TP493
(iPod INDICATOR)

TP496
1 7 9 CN653
A
MAIN BOARD
D902, 906
JW492
LP401
2 6 8
11, 12
(Page 32) A K

(EC79i/EC99i) 1-878-457- (11, 12) SW322 SW321

R404
1
iPod

B
MAIN BOARD
C MAIN BOARD (AC IN)

D CN605
(Page 32) (Page 32)
CN606 SW325
CD
3
R407 CN004
(EC79i/EC99i) (EC69i)
R405 PT-SINGLE BOARD
DSGX

SW323
(Page 32) 1 RY001
C001
+ CN654 F
MAIN BOARD

R406
E 14 (EC69i: AUS/EC79i: AUS/EC99i: AUS)
PT004 (EC69i)
CN002 JW004
(EC69i/EC79i) PT005 (EC79i/EC99i)
CN003 MAIN POWER
TRANSFORMER
1 4

10
8
SW311 PT001 (EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
PT002 (EC69i: UK/EC79i: UK/EC99i: UK)
G PT003 (EC69i: AUS/EC79i: AUS/EC99i: AUS)
MAIN BOARD SUB POWER
CN604 TRANSFORMER
D001
Y
(Page 32)
F

1
10
D003 6

1
SW324 (EC99i)
TUNING + D002
.
-
9 5
11, 12
TP402 TP401
1-878-458- (11, 12)
CN313
TP403
3 1 PT004 PT005 PT001, 002 PT003
11, 12
1 1 1 4 1 4
1-878-456- (11, 12) 14 14

G
E PANEL BOARD
CN303 ∗
∗ 9 5 9 5
(Page 36) 10
6
10
6

∗ NOT REPLACEABLE: ∗ NOT REPLACEABLE:

BUILD IN TRANSFORMER BUILD IN TRANSFORMER

HCD-EC69i/EC79i/EC99i
38 38
 HCD-EC69i/EC79i/EC99i
Ver. 1.1

6-15. SCHEMATIC DIAGRAM - AUDIO IN/OUT, KEY, POWER SUPPLY Section -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

REG BOARD KEY BOARD PT-SINGLE BOARD

(EC79i: UK, AUS/EC99i)

A IC601 R408
3.9k
R407
2.7k
R406
2.2k
R405
1.5k
R404
1.2k CN313 (EC69i: AUS/EC79i: AUS/EC99i: AUS)
3P C001
+9V REGULATOR
E
0.1
TP401 PT003
IC601 1 KEY1 SUB POWER TRANSFORMER
KIA7809API-U/PF TP402
2 KEY2 PANEL
16.2 1 3 9 TP403 5
I O 3 GND BOARD
G SW326 SW325 SW324 SW323 SW322 SW321 SW311 CN303
W610 DSGX iPod CD
(Page 37)
D
2 TUNING + + 4 6
3P
C698
IN 1 0.1
B MAIN
BOARD
GND 2 3 7

(2/2) OUT 3
RY001
CN609 2 8
(Page 31)
1 9

JW004 (EC69i: AUS/EC79i: AUS/EC99i: AUS)

JACK BOARD IP BOARD CN902 (EC69i: UK/EC79i: UK/EC99i: UK)
(EC79i/EC99i) (EC79i/EC99i) 30P PT002
C903 (iPod Dock) SUB POWER TRANSFORMER
D902, 906 0.1
(iPod INDICATOR) TP901
C
CN496
J491 1 DGND
9P 5
PC IN D906
TP491 R492 R491 SML-E12UWT86R R905 R906 R908 R909 2 DGND
22k 100k 100k 100k 100k TP902 D002
AUDIO-L 9 22k MC2838-T112-1
TP492 3 TPA+
A-GND 8 R920 TP903 4 6

B AUDIO-R 7
TP493

TP494
D491
1PS226-115 D902
SML-E12UWT86R
150
TP904
4
5
USB D+

TPA-
HP-GND 6 TP905 3 7
MAIN TP495 6 USB D-
BOARD HP-L 5 11 PGND R917 R907 R910 TP906
(1/2) TP496 150 75k 75k 7 TPB+
CN605 HP-R 4 10 VBUS5V TP907 2 8
TP497 8 VBUS D001

D (Page AMP-ON 3
TP498
9 VBUS5V TP908
9 TPB-
MC2836

30) SP-RELAY
GND
2
1
C496
1000p
C495
1000p
J492
PHONES A 8 O-iPod-RXD
7 I-iPod-TXD R912
TP909

TP910
10 Acc ID
1 9

11 PWR+
MAIN 220k TP911 (EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
6 I-iPod-DET
BOARD 12 PWR+ PT001
(1/2) 5 DGND TP912 SUB POWER TRANSFORMER
(EC69i) CN497 13 Acc PWR
CN653 R911 TP913
7P 4 L+
AUDIO-R 7 (Page 30) 3 L-
C907
1000p
330k 14 Reserved 5

C HP-GND 6 2 R+
TP914
15
16
DGND
DGND 4 6 D003
HP-L 5 1 R- MC2838-T112-1
E MAIN
BOARD HP-R 4
R901
100
C908
1000p TP915
17 Reserved
3 7
(1/2) 18 RXD
AMP-ON 3 TP916
CN606 19 TXD
(Page SP-RELAY 2
D901
RB521S-30-TE61
R902 100
20 Acc DET 2 8
30) GND 1 TP917

TP918
21 S-VIDEO-Y
C909 C904 R913 22 S-VIDEO-C 1 9
1000p 0.1 100 TP919
23 VIDEO-OUT
(EC79i/EC99i)
24 Remote Sense CN002 (EC99i)
F TP920

TP921
25 LINE-IN-L
PT005
MAIN POWER TRANSFORMER
10P
1 RELAY ON/OFF
R903 CN004
100 26 LINE-IN-R 3P
TP922 6 10 2 V STBY
27 LINE-OUT-L
TP923 LIVE 1 ∗ 3 AC DETECT
28 LINE-OUT-R (AC IN)
R904
100 R914
100
TP924

TP925
29 A-GND
NEUTRAL 3 5 11 4
5
VH(AC)

VH(AC)
F
30 DGND MAIN
4 12 6 VL(AC)
BOARD
7 GND (2/2)
CN654
G
3 13 8 VL(AC)

9 VH(AC)
(Page
2 14 10 VH(AC) 31)
1

(EC69i)
CN003 (EC69i/EC79i)
PT004 8P
MAIN POWER TRANSFORMER
1 RELAY ON/OFF

H 6
∗
10 2 V STBY G
3 AC DETECT
MAIN
5 11 4 VH(AC) BOARD
(2/2)
5 VL(AC)
CN604
4 12 6

7
GND

VL(AC)
(Page
3 13 8 VH(AC)
31)

I 2 14

∗ NOT REPLACEABLE
1 BUILT IN TRANSFORMEWR

HCD-EC69i/EC79i/EC99i
39 39
 HCD-EC69i/EC79i/EC99i

• Waveforms – MAIN Board –

IC602 BD3499FV-E2
– CD Board – – MAIN Board – – PANEL Board –
A1 1
IC101 JB (RFi) IC801 X (XOUT) IC301 RG (X1A)
 (CD play mode)
RB XB A2 2
B1 3
28 FIL
B2 4 INPUT INPUT
GAIN 27 GND
C1 5 SELECTOR
C2 6
D1 7
PC BUS 26 SDA
D2 8
LOGIC 25 SCL
1.2 Vp-p 3.1 Vp-p
0.5 to 1.3 Vp-p 13.4 μs 30.6 μs SEL2 9
INVERTER
SEL1 10
24 VCC
200 mV/DIV, 500 ns/DIV 500 mV/DIV, 5 μs/DIV 1 V/DIV, 10 μs/DIV
VOL1 11
VOLUME
VOL2 12
23 OUT1
IC101 XG (XO) IC301 PT (X1)
 (CD play mode)
XT TC2 13
SURROUND

TC1 14 TREBLE/
BASS

22 SB1
21 SR
20 SB2

3.3 Vp-p 3.6 Vp-p 19 OUT2

59.1 ns 168 ns
18 BCB1
1 V/DIV, 20 ns/DIV 1 V/DIV, 100 ns/DIV 17 BCA1
16 BCA2
15 BCB2

• IC Block Diagrams
IC701 NJM2368V (TE2)
– CD Board –
IC201 TK63115SCL-G@GT IC401 BA5826SFP-E2

REF

CS
CT

V+
8 7 6 5

VIN 1 1 28 GND
VO1(–) VOLTAGE
D.BUFF REFERENCE
THERMAL & 27 VO4(–) 30 μA
OVER CURRENT VO1(+) 2
PROTECTION D.BUFF
D.BUFF LEVEL
SHIFT 26 VO4(+)
L. O
– OSC +
VOLTAGE IN1 3 LEVEL D.BUFF
GND 2
REFERENCE + SHIFT UNDERVOLTAGE −
5 VOUT LOCKOUT
25 IN4 S. C. P
ON/OFF RESET 4 +
VCONT 3 4 NC
CONTROL
−
PWM
24 IN4' ERROR +
THERMAL
AMP −
SHUT-DOWN +
REGULATOR − +
BIAS TRAP +
REGULATOR

1 2 3 4

OUT
IN-

F. B

GND
REGB 5 23 BIAS

REGOUT 6 VCC 22 VCC

MUTE 7 MUTE VCC 21 VCC

20 IN3'
GND 8

IN2' 9
19 IN3
IN2 10
LEVEL
LEVEL SHIFT D.BUFF
D.BUFF SHIFT
VO2(+) 11 18 VO3(+)
D.BUFF
D.BUFF
VO2(–) 12 17 VO3(–)
GND 13
16 RESETt
OPOUT 14
15 OPIN

HCD-EC69i/EC79i/EC99i
40 40
 HCD-EC69i/EC79i/EC99i

IC801 LV23003VA

AM FM
AM RF-IN 1 36 FM RF-IN
RF RF
35 GND2
34 FMRF-OUT
REG 2
FM 33 VCC2
FM-MIX 3 FM
MIX 32 FM-OSC
OSC
GND1 4
AM
AM-MIX 5 AM
MIX 31 AM-OSC
OSC
VCC1 6 30 BO2
OSC 29 BO1
BUFFER LOW-PASS 28 LP-OUT
FILTER 27 LP-IN
26 PD
AGC 25 AGC
AMIF-IN 7 AM AM
IF DET 24 AMDET-OUT

FMIF-IN 8 FM FM
23 FMDET-OUT
IF DET

FM
S-METER

SD
IF
BUFFER ST
PIROT
P-DET 9 DET TRIG

STSW
FF

FF FF

PHASE VCO
P-COMP 10
COMPARATOR
FM-DET 11
L-OUT 12
DECODER
R-OUT 13 MUTE 22 MPX-IN
VSS 14

UNIVERSAL POWER ON 21 VDD

COUNTER RESET
PROGRAMMABLE
DATA SHIFT DIVIDER
CE 15 REGISTER
16 LATCH
DI CCB SWALLOW
CL 17 I/F COUNTER
DO 18
PHASE
UNLOCK DETECTOR
DETECTOR CHARGE
PUMP

20 XOUT
REFERENCE
19 XIN
DIVIDER

– PANEL Board –
IC303 BA6956AN

TSD

CONTROL LOGIC

1 2 3 4 5 6 7 8 9
VREF

VCC
RNF

FIN

GND
OUT2

OUT1

RIN
VM

41
HCD-EC69i/EC79i/EC99i

• IC Pin Function Description

CD BOARD IC101 TC94A70FG-006 (CD-MP3 PROCESSOR)

Pin No. Pin Name I/O Description
1 AVSS3 - Ground terminal
2 RFZi I RF ripple zero crossing signal input terminal
3 RFRP O RF ripple signal output terminal
4 SBAD/RFDC O Sub beam addition signal or RF peak detection signal output terminal Not used
5 FEi O Focus error signal output terminal Not used
6 TEi O Tracking error signal output terminal
7 TEZi I Tracking error zero crossing signal input terminal
8 AVDD3 - Power supply terminal (+3.3V)
9 FOo O Focus coil drive signal output terminal
10 TRo O Tracking coil drive signal output terminal
11 VREF I Reference voltage (+1.65V) input terminal
12 FMo O Sled motor drive signal output terminal
13 DMo O Spindle motor drive signal output terminal
14 VSSP3 - Ground terminal
15 VCOi I VCO control voltage input terminal
16 VDDP3 - Power supply terminal (+3.3V)
17 VDD1 - Power supply terminal (+1.5V)
18 VSS1 - Ground terminal
19 FGiN I FG signal input terminal Not used
20 IO0 (/HSO) I Disc inner position detection signal input terminal
21 IO1 (/UHSO) O Not used
22 XVSS3 - Ground terminal
23 XI I System clock input terminal (16.9344 MHz)
24 XO O System clock output terminal (16.9344 MHz)
25 XVDD3 - Power supply terminal (+3.3V)
26 DVSS3 - Ground terminal
27 RO O Audio data (R-ch) output to the electrical volume
28 DVDD3 - Power supply terminal (+3.3V)
29 DVR O Reference voltage (+1.65V) output terminal
30 LO O Audio data (L-ch) output to the electrical volume
31 DVSS3 - Ground terminal
32 VDDT3 - Power supply terminal (+3.3V)
33 VSS1 - Ground terminal
34 VDD1 - Power supply terminal (+1.5V)
35 VDDM1 - Power supply terminal (+1.5V)
36 SRAMSTB I S-RAM standby mode control signal input terminal Fixed at “L” in this set
37 XRST I Reset signal input from the system controller “L”: reset
38, 39 BUS0, BUS1 I Serial data input from the system controller
40 BUS2 (SO) I Serial data input from the system controller
41 BUS3 (SI) I Serial data input from the system controller
42 BUCK (CLK) I Serial data transfer clock signal input from the system controller
43 XCCE I Chip enable signal input from the system controller
44 TEST I Setting terminal for test mode Normally fixed at “L”
45 IRQ I Interrupt request signal input terminal Not used
46 AoUT3 (PO4) O Request signal output terminal Not used
47 AoUT2 (PO5) O Audio data output terminal Not used
48 PIO0 O Request signal output to the system controller
49, 50 PIO1, PIO2 O Not used
51 PIO3 I Gate signal input terminal Not used
52 VSS1 - Ground terminal
53 VDDT3 - Power supply terminal (+3.3V)
54 SBSY O Subcode block sync signal output to the system controller
55 SBOK/FOK O Not used

42
 HCD-EC69i/EC79i/EC99i

Pin No. Pin Name I/O Description

56 IPF O Not used
57 SFSY/LOCK O Not used
58 ZDET O Zero detection signal output terminal Not used
59 GPIN I Not used
60 MS I Microcomputer interface mode selection signal input terminal Fixed at “H” in this set
61 DOUT (PO6) O Digital audio data output terminal Not used
62 AOUT1 (PO7) O Audio data output terminal Not used
63 BCK (PO8) O Bit clock signal output terminal Not used
64 LRCK (PO9) O L/R sampling clock signal output terminal Not used
65 AIN (PI4) I Digital audio data input terminal Not used
66 BCKi (PI5) I Bit clock signal input terminal Not used
67 LRCKi (PI6) I L/R sampling clock signal input terminal Not used
68 VDD1 - Power supply terminal (+1.5V)
69 VSS1 - Ground terminal
70 AWRC - Not used
71 PVDD3 - Power supply terminal (+3.3V)
72 PDo O Phase error margin signal between EFM signal and PLCK signal output terminal
73 TMAXS O TMAX detection signal output terminal Not used
74 TMAX O TMAX detection signal output terminal
75 LPFN I Inverted signal input from the operation amplifier for PLL loop filter
76 LPFo O Signal output from the operation amplifier for PLL loop filter
77 PVREF I Reference voltage (+1.65V) input terminal
78 VCOF O VCO filter output terminal
79 PVSS3 - Ground terminal
80 SLCo O EFM slice level output terminal
81 RFi I RF signal input terminal
82 RFRPi I RF ripple signal input terminal
83 RFEQo O EFM slice level output terminal
84 VRo O Reference voltage (+1.65V) output terminal
85 RESiN O External resistor connection terminal
86 VMDiR O Reference voltage (+1.65V) output terminal for automatic power control circuit
87 TESTR O Low-pass filter terminal for RFEQO offset correction
88 AGCi I RF signal amplitude adjustment amplification input terminal
89 RFo O RF signal generation amplification output terminal
90 RVDD3 - Power supply terminal (+3.3V)
Laser diode on/off control signal output to the automatic power control circuit
91 LDo O
“H”: laser diode on
92 MDi I Light amount monitor input from the laser diode of optical pick-up block
93 RVSS3 - Ground terminal
94 FNi2 (C) I Main beam (C) input from the optical pick-up block
95 FNi1 (A) I Main beam (A) input from the optical pick-up block
96 FPi2 (D) I Main beam (D) input from the optical pick-up block
97 FPi1 (B) I Main beam (B) input from the optical pick-up block
98 TPi (F) I Sub beam (F) input from the optical pick-up block
99 TNPC O External capacitor connection terminal
100 TNi (E) I Sub beam (E) input from the optical pick-up block

43
HCD-EC69i/EC79i/EC99i

PANEL BOARD IC301 MB90F830PF-GE1 (SYSTEM CONTROLLER)

Pin No. Pin Name I/O Description
1 SEG32 O Segment drive signal output to the liquid crystal display
O-SP-RELAY-ON/ Relay drive signal output terminal (for speaker), and subwoofer function on/off control signal
2 O
TC ON/SW ON output terminal (EC99i)
3 O-POWER O Main power on/off control signal output terminal “H”: main power on
4 O-CD-ON O CD power on/off control signal output terminal “H”: CD power on
5 I-CDM-CLOSE I Detection switch input from the CD mechanism section (EC79i: UK, Australian/EC99i)
6 NC - Not used
Detection switch input from the CD lid opn/close detect switch (EC69i/EC79i: US, Canadian
I-CDM-OPEN/
7 I models), or Detection switch input from the CD mechanism section (EC79i: UK, Australian/
CDM-OPEN_CLOSE
EC99i)
8 O-CDM-M+/NC O Motor drive signal output terminal (EC79i: UK, Australian/EC99i)
9 I-RMC I Remote control signal input from the remote control receiver
10 O-CDM-M-/NC O Motor drive signal output terminal (EC79i: UK, Australian/EC99i)
11 5V-ON O VBUS power supply on/off control signal output terminal
12 NC - Not used
13 X0A I Sub system clock input terminal (32.768 kHz)
14 X1A O Sub system clock output terminal (32.768 kHz)
15 VCC - Power supply terminal (+3.3V)
16 VSS - Ground terminal
I/O-CD-BUS0 to
17 to 20 O Serial data output to the CD-MP3 processor
I/O-CD-BUS3
21, 22 NC - Not used
23 O-DR-MUTE O Motor drive on/off control signal output to the motor/coil driver
24 I-REQ I Request signal input from the CD-MP3 processor
25 O-CD-BUCK O Serial data transfer clock signal output to the CD-MP3 processor
26 O-CD-CCE O Chip enable signal output to the CD-MP3 processor
27 O-CD-RST O System reset signal output to the CD-MP3 processor “L”: reset
28 O-LED O LED drive signal output terminal for standby indicator
29 I-iPod-TXD I Serial data input from the iPod connector
30 SCLK - Not used
31 O-iPod-RXD O Serial data output to the iPod connector
32 AVCC - Power supply terminal (+3.3V)
33 O-AUDIO-DATA O Serial data output to the electrical volume
34 O-AUDIO-CLK O Serial data transfer clock signal output to the electrical volume
35 AVSS - Ground terminal
36 I-P-MONI I Power monitor signal input terminal
37, 38 I-KEY1, I-KEY2 I Front panel key input terminal (A/D input)
39 I-TU-ANSD I Auto gain control signal input terminal
40 I-5V/9V-DET I Power supply voltage detection signal input terminal
41 I-KEY-WAKE-UP/VOL I Front panel key input terminal (A/D input)
42 I-HOLD I Hold signal input terminal
43 O-CD-SBSY I Subcode block sync signal input from the CD-MP3 processor
44 GND - Ground terminal
45 I-iPod-DET I iPod detection signal input terminal
46 I-MODEL I Model setting terminal
47 I-SUFFIX I Suffix setting terminal
48 I-TU-DO I Serial data input from the AM/FM DET
49, 50 NC - Not used
51 to 53 MD2 to MD0 - Not used
54 I-RST I Reset signal input from the reset switch “L”: reset
55 O-TU-CE O Chip enable signal output to the AM/FM DET
56 O-TU-DI O Serial data output to the AM/FM DET
57 O-TU-CLK O Serial data transfer clock signal output to the AM/FM DET
Terminal for doubler circuit capacitor connection to develop liquid crystal display drive volt-
58 VLCD -
age

44
 HCD-EC69i/EC79i/EC99i

Pin No. Pin Name I/O Description

COM0, COM1,
59 to 62 O Common drive signal output to the liquid crystal display
CMO2, CMO3
63, 64 SEG0, SEG1 O Segment drive signal output to the liquid crystal display
65 VCC - Power supply terminal (+3.3V)
66 VSS - Ground terminal
67 to 89 SEG2 to SEG24 O Segment drive signal output to the liquid crystal display
90 VCC - Power supply terminal (+3.3V)
91 VSS - Ground terminal
92 X1 I Main system clock output terminal (6 MHz)
93 X0 O Main system clock input terminal (6 MHz)
94 to 100 SEG25 to SEG31 O Segment drive signal output to the liquid crystal display

45
HCD-EC69i/EC79i/EC99i
SECTION 7
EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so • The mechanical parts with no reference
The components identified by mark 0
they may have some difference from the number in the exploded views are not sup-
or dotted line with mark 0 are critical for
original one. plied.
safety.
• Items marked “*” are not stocked since • Color Indication of Appearance Parts Ex-
Replace only with part number specified.
they are seldom required for routine ser- ample:
vice. Some delay should be anticipated KNOB, BALANCE (WHITE) . . . (RED) Les composants identifiés par une marque
when ordering these items. ↑ ↑ 0 sont critiques pour la sécurité.
Parts Color Cabinet’s Color Ne les remplacer que par une pièce portant
• Abbreviation le numéro spécifié.
AUS : Australian model
CND : Canadian model

7-1. OVERALL SECTION

(HCD-EC69i)

1 #1

#1
top panel section
(HCD-EC69i/EC79i: US, CND)

2
#1

not supplied
#1
#2
#1

#2

MAIN boad, chassis section

(HCD-EC69i)

3 2
front panel section

#1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 4-120-682-02 PANEL (L), SIDE (US, CND) 3 4-120-683-12 PANEL (R), SIDE (UK, AUS)
1 4-120-682-12 PANEL (L), SIDE (UK, AUS)
2 3-363-099-32 SCREW (CASE 3 TP2) #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
3 4-120-683-02 PANEL (R), SIDE (US, CND) #2 7-685-247-14 SCREW +KTP 3X10 TYPE2 NON-SLIT

46
 HCD-EC69i/EC79i/EC99i

7-2. OVERALL SECTION

(HCD-EC79i/EC99i)

(EC79i: US, CND) (EC79i: UK, AUS/EC99i)

top panel section top panel section

(HCD-EC69i/EC79i: US, CND) (HCD-EC79i: UK, AUS/EC99i)

A #1
#1
A

D
D

E C B C

51

#1

52 D

#1

(EC79i:
C US, CND)
E #1 A
#2 B
#1

#2
not supplied

MAIN boad section

(HCD-EC79i/EC99i)

front panel section 53

#1
52

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 2-890-831-01 PANEL (L), SIDE (US, CND) 53 2-890-830-11 PANEL (R), SIDE (UK, AUS)
51 2-890-831-11 PANEL (L), SIDE (UK, AUS)
52 3-363-099-32 SCREW (CASE 3 TP2) #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
53 2-890-830-01 PANEL (R), SIDE (US, CND) #2 7-685-247-14 SCREW +KTP 3X10 TYPE2 NON-SLIT

47
HCD-EC69i/EC79i/EC99i

7-3. TOP PANEL SECTION

(HCD-EC69i/EC79i: US, CND)

101

102
not supplied

103
111
(EC69i) (ES79i: US, CND)
104 104

106
A
106 A
112 112

included in 105
105 105 included in
SW750 105 SW750

112 B 112 B

B
107

108 113
(including sled motor (M402),
spindle motor (M401))
110 108

109
109 110
included in 113
(sled motor (M402))
included in 113
(spindle motor (M401)) 109
114

S201

115

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
101 4-120-740-02 LID (CD) 109 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING
102 1-452-899-11 MAGNET 110 3-931-379-31 RUBBER, VIBRATION PROOF (GREEN)
103 3-019-395-01 PLATE, CHUCKING 111 3-253-143-01 SCREW (B2.6), (+) P TAPPING
104 4-145-341-01 SPRING (LID) 112 3-087-053-01 +BVTP2.6 (3CR)
105 4-120-739-01 PANEL, TOP (EC69i: US, CND) 0 113 8-820-126-02 OPTICAL PICK-UP BLOCK (KSM-213CDP/C2NP)

105 4-120-739-11 PANEL, TOP (EC69i: UK, AUS) 114 1-834-268-21 WIRE (FLAT TYPE) (16 CORE)
105 4-136-037-01 PANEL, TOP (1) (EC79i: US, CND) 115 A-1217-914-A CD BOARD, COMPLETE
106 3-047-468-11 DAMPER S201 1-771-853-11 SWITCH, DETECTION (LIMIT)
107 4-247-493-01 COVER, CD SW750 1-692-960-11 SWITCH, PUSH (1 KEY) (CD LID OPEN/
108 3-931-379-21 RUBBER, VIBRATION PROOF (RED) CLOSE DETECT)

48
 HCD-EC69i/EC79i/EC99i
Ver. 1.1

7-4. TOP PANEL SECTION

(HCD-EC79i: UK, AUS/EC99i)

152
151

151

156 not supplied

155

not supplied
(LOADING board)

157 158
(including sled motor (M402), 159
spidle motor (M401)) 154

158 158
159
159
160 158 160
159
included in 157 160 included in 157
(spindle motor (M401)) (sled motor (M402))
161

162

S201

153

#1

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
151 3-253-143-01 SCREW (B2.6), (+) P TAPPING 0 157 A-4735-357-A BASE ASSY, OP (KSM-213D)
152 4-120-662-01 LID, TOP 158 4-227-549-11 INSULATOR
153 4-120-661-01 PANEL, TOP (LOADING) (EC99i: US, CND) 159 4-227-045-31 SPRING (INSULATOR), COIL
153 4-120-661-11 PANEL, TOP (LOADING) (EC79i: UK, AUS/EC99i:
UK, AUS) 160 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING
154 1-836-761-21 CABLE, FLEXIBLE FLAT (5 CORE) (EC79i: UK, 161 1-832-404-21 CABLE, FLEXIBLE FLAT (16 CORE)
AUS/EC99i) 162 A-1217-914-A CD BOARD, COMPLETE
S201 1-771-853-11 SWITCH, DETECTION (LIMIT)
155 A-1579-622-A CDM76A ASSY #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
156 4-120-079-01 BELT (CDM76)

49
HCD-EC69i/EC79i/EC99i
Ver. 1.1

7-5. FRONT PANEL SECTION

not supplied
(JACK HOLD board)
205
204
207
205
not supplied 205
(JACK board)
208

not supplied 206 205

(EC79i: UK, AUS/EC99i)

203 205

202 209 not supplied

not supplied (KEY board)
(EC79i/E99i) 205 (FFC HOLD board)
214
205
213 not supplied
205 (COVER board)
210

212
211

201

iPod dock section

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
201 4-120-663-01 KNOB (VOL) 207 A-1599-065-A PANEL BOARD, COMPLETE (EC99i: US, CND)
202 A-1616-644-A PANEL ASSY, FRONT (EC99i: US, CND) 207 A-1599-078-A PANEL BOARD, COMPLETE (EC99i: AUS)
202 A-1616-645-A PANEL ASSY, FRONT (EC99i: AUS) 207 A-1599-084-A PANEL BOARD, COMPLETE (EC79i: US, CND)
202 A-1616-646-A PANEL ASSY, FRONT (EC79i: US, CND) 207 A-1599-090-A PANEL BOARD, COMPLETE (EC79i: UK)
202 A-1616-647-A PANEL ASSY, FRONT (EC79i: UK) 207 A-1599-094-A PANEL BOARD, COMPLETE (EC79i: AUS)

202 A-1616-648-A PANEL ASSY, FRONT (EC79i: AUS) 207 A-1599-116-A PANEL BOARD, COMPLETE (EC69i: US, CND)
202 A-1616-649-A PANEL ASSY, FRONT (EC69i: US, CND) 207 A-1599-133-A PANEL BOARD, COMPLETE (EC69i: UK)
202 A-1616-650-A PANEL ASSY, FRONT (EC69i: UK) 207 A-1599-136-A PANEL BOARD, COMPLETE (EC69i: AUS)
202 A-1616-651-A PANEL ASSY, FRONT (EC69i: AUS) 207 A-1731-204-A PANEL BOARD, COMPLETE (EC99i: UK)
202 A-1731-504-A PANEL ASSY, FRONT (EC99i: UK) 208 1-836-760-21 CABLE, FLEXIBLE FLAT (21 CORE) (EC69i/
EC79i: US, CND)
203 4-120-650-01 WINDOW (EC99i: US, CND, AUS)
203 4-120-650-11 WINDOW (EC79i: UK) 208 1-836-762-21 CABLE, FLEXIBLE FLAT (21 CORE) (EC79i: UK,
203 4-120-650-21 WINDOW (EC79i: US, CND, AUS) AUS/EC99i)
203 4-120-650-31 WINDOW (EC69i: UK) 209 1-832-896-21 CABLE, FLEXIBLE FLAT (25 CORE) (EC69i)
203 4-120-650-41 WINDOW (EC69i: US, CND, AUS) 209 1-832-897-21 CABLE, FLEXIBLE FLAT (25 CORE) (EC79i/EC99i)
210 3-047-468-62 DAMPER
203 4-120-650-51 WINDOW (EC99i: UK) 211 3-876-249-01 LATCH
204 1-832-804-21 CABLE, FLEXIBLE FLAT (7 CORE) (EC69i)
204 1-832-815-21 CABLE, FLEXIBLE FLAT (9 CORE) (EC79i/EC99i) 212 4-225-252-01 CUSHION (FOOT)
205 3-087-053-01 +BVTP2.6 (3CR) 213 4-120-658-01 RING (VOL) (EC79i/EC99i)
206 3-297-298-01 SHEET (RM) 214 4-120-657-01 RING, ORNAMENT (EC79i/EC99i)

50
 HCD-EC69i/EC79i/EC99i

7-6. iPod DOCK SECTION

258
259

257

256
254

253

not supplied
(IP board)
255
252

251

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
251 X-2348-584-1 IPOD ASSY (EC79i/EC99i) 256 1-836-763-21 CABLE, FLEXIBLE FLAT (11 CORE) (EC79i/EC99i)
251 4-120-664-01 PLATE, ORNAMENT (DOCK) (EC69i) 256 1-836-766-21 CABLE, FLEXIBLE FLAT (11 CORE) (EC69i)
252 3-253-143-01 SCREW (B2.6), (+) P TAPPING 257 4-120-666-01 LOCK (DOCK)
253 3-277-576-01 ESCUTCHEON 258 4-120-665-01 BASE (DOCK)
254 3-277-577-01 SPRING
259 4-127-708-01 SHEET
255 4-127-709-01 SHEET

51
HCD-EC69i/EC79i/EC99i

7-7. MAIN BOARD, CHASSIS SECTION

(HCD-EC69i)

303

301

#
#1

#1 #1
M601
#1

not supplied not supplied

% (REG board)
" 302
304
& #1
#1
not supplied
not supplied
#1 (AC HOLD board)
305
307
#1 PT004
309
#

not supplied
(2CH-4CH board) not
supplied
306 302
%

"
&
not supplied
(PT-SINGLE board)

302

not supplied
not supplied
(CABLE HOLD board)
308

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
301 A-1599-114-A MAIN BOARD, COMPLETE (EC69i: US, CND) 306 1-831-744-21 CABLE, FLEXIBLE FLAT (5 CORE)
301 A-1599-131-A MAIN BOARD, COMPLETE (EC69i: UK, AUS) 307 4-900-386-01 SCREW
302 3-077-331-01 +BV3 (3-CR) 308 4-225-252-01 CUSHION (FOOT)
303 4-120-681-02 PANEL, BACK (EC69i: US) 309 3-905-609-31 SCREW (TRANSISTOR)
303 4-120-681-12 PANEL, BACK (EC69i: UK, AUS) M601 1-787-319-12 FAN, DC (EC69i)

303 4-120-681-22 PANEL, BACK (EC69i: CND) 0 PT004 1-445-562-11 TRANSFORMER, POWER (EC69i: UK)
0 304 1-834-965-22 CORD, POWER (US, CND) 0 PT004 1-445-564-11 TRANSFORMER, POWER (EC69i: US, CND)
0 304 1-834-966-41 POWER-SUPPLY CORD (UK) 0 PT004 1-445-574-11 TRANSFORMER, POWER (EC69i: AUS)
0 304 1-834-967-21 CORD, POWER (AUS) #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
305 3-701-748-00 CLAMP

52
 HCD-EC69i/EC79i/EC99i
Ver. 1.1

7-8. MAIN BOARD SECTION

(HCD-EC79i/EC99i)

352
(EC99i)
#1

#1

#1

#1
351

353
M601

#1

#
$
#1 not supplied
(AC HOLD board) " 354
%
&
$

( %
%
&

$
&

( " ( "
# #

chassis section chassis section

(EC99i) (EC79i)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
351 A-1599-061-A MAIN BOARD, COMPLETE (EC99i: US, CND) 352 4-124-521-52 PANEL, BACK (EC79i: CND)
351 A-1599-076-A MAIN BOARD, COMPLETE (EC99i: UK, AUS)
351 A-1599-082-A MAIN BOARD, COMPLETE (EC79i: US, CND) 0 353 1-834-965-22 CORD, POWER (US, CND)
351 A-1599-088-A MAIN BOARD, COMPLETE (EC79i: UK, AUS) 0 353 1-834-966-41 POWER-SUPPLY CORD (UK)
352 4-124-521-02 PANEL, BACK (EC99i: US) 0 353 1-834-967-21 CORD, POWER (AUS)
354 3-701-748-00 CLAMP (EC79i/EC99i: US, CND, AUS)
352 4-124-521-12 PANEL, BACK (EC99i: UK, AUS) 354 4-147-421-01 HOLDER WIRE (EC99i: UK)
352 4-124-521-22 PANEL, BACK (EC79i: US)
352 4-124-521-32 PANEL, BACK (EC79i: UK, AUS) M601 1-787-344-11 FAN, DC (EC79i/EC99i)
352 4-124-521-42 PANEL, BACK (EC99i: CND) #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S

53
HCD-EC69i/EC79i/EC99i
Ver. 1.1

7-9. CHASSIS SECTION

(HCD-EC79i/EC99i)

(EC99i) (EC79i)
#1 402
403 402 #1

402 not supplied

#1
401 not supplied
(2CH-4CH
#1 AMP board)
not
supplied
#1 not supplied 406
(2CH-4CH
not supplied #1
AMP board)
(REG board)
#1 not supplied
(3CH AMP board)
404
not supplied 404

not supplied 404

(REG board) 404
#1

not supplied not supplied

A A

405

PT005
405
not supplied 404
(CABLE HOLD board)
404
not supplied
A

not supplied

not supplied
(PT-SINGLE board)

407

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
401 1-832-806-21 CABLE, FLEXIBLE FLAT (7 CORE) (EC99i) 0 PT005 1-445-565-11 TRANSFORMER, POWER (EC79i: US, CND/
402 3-905-609-31 SCREW (TRANSISTOR) EC99i: US, CND)
403 1-831-744-21 CABLE, FLEXIBLE FLAT (5 CORE) (EC99i) 0 PT005 1-445-566-11 TRANSFORMER, POWER (EC79i: UK/EC99i: UK)
404 3-077-331-01 +BV3 (3-CR) 0 PT005 1-445-569-11 TRANSFORMER, POWER (EC79i: AUS/EC99i:
405 4-900-386-01 SCREW AUS)

406 1-832-795-21 CABLE, FLEXIBLE FLAT (5 CORE) (EC79i) #1 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S
407 4-225-252-01 CUSHION (FOOT)

54
 HCD-EC69i/EC79i/EC99i
SECTION 8
2CH-4CH AMP
ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in • CAPACITORS
When indicating parts by reference num-
the parts list may be different from the uF: μF
ber, please include the board name.
parts specified in the diagrams or the com- • COILS
ponents used on the set. uH: μH The components identified by mark 0
• -XX and -X mean standardized parts, so • SEMICONDUCTORS or dotted line with mark 0 are critical for
they may have some difference from the In each case, u: μ, for example: safety.
original one. uA. . : μA. . , uPA. . , μPA. . , Replace only with part number specified.
• Items marked “*” are not stocked since uPB. . : μPB. . , uPC. . , μPC. . ,
they are seldom required for routine ser- uPD. . : μPD. . Les composants identifiés par une marque
vice. Some delay should be anticipated • Abbreviation 0 sont critiques pour la sécurité.
when ordering these items. AUS : Australian model Ne les remplacer que par une pièce portant
• RESISTORS CND : Canadian model le numéro spécifié.
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
2CH-4CH AMP BOARD
***************** C162 1-126-968-11 ELECT 100uF 20% 50V
(EC69i)
< CAPACITOR > C162 1-128-553-11 ELECT 220uF 20% 63V
(EC79i)
C101 1-126-960-11 ELECT 1uF 20% 50V C162 1-128-576-11 ELECT 100uF 20% 63V
C102 1-126-960-11 ELECT 1uF 20% 50V (EC99i)
C103 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C163 1-126-968-11 ELECT 100uF 20% 50V
C104 1-164-315-11 CERAMIC CHIP 470PF 5% 50V (EC69i)
C105 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C163 1-128-553-11 ELECT 220uF 20% 63V
(EC79i)
C106 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C107 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V C163 1-128-576-11 ELECT 100uF 20% 63V
C108 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V (EC99i)
C109 1-126-947-11 ELECT 47uF 20% 35V C164 1-165-621-91 CERAMIC CHIP 0.1uF 50V
C110 1-126-947-11 ELECT 47uF 20% 35V C165 1-165-621-91 CERAMIC CHIP 0.1uF 50V
C166 1-128-582-11 ELECT 10uF 20% 100V
C111 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V (EC79i)
C112 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C167 1-128-582-11 ELECT 10uF 20% 100V
C119 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (EC79i)
(EC79i)
C120 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V < CONNECTOR >
(EC79i)
C121 1-126-960-11 ELECT 1uF 20% 50V CN100 1-784-766-11 CONNECTOR, FFC 5P
(EC79i) CN101 1-820-831-11 HOLDER, CABLE 7P (EC79i)
CN102 1-824-030-21 HOLDER, CABLE 5P (EC69i/EC99i)
C122 1-126-960-11 ELECT 1uF 20% 50V
(EC79i) < DIODE >
C123 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
(EC79i) D140 6-501-817-01 DIODE MA2J1110GLS0
C124 1-164-315-11 CERAMIC CHIP 470PF 5% 50V D141 6-500-335-01 DIODE MC2838-T112-1
(EC79i) D152 6-500-335-01 DIODE MC2838-T112-1 (EC79i)
C125 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
(EC79i) < IC >
C126 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
(EC79i) IC101 6-600-732-01 IC STK433-890-E (EC79i)
IC102 6-705-625-01 IC STK433-040 (EC69i)
C127 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V IC103 6-600-580-01 IC STK433-090-E (EC99i)
(EC79i)
C128 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V < JUMPER RESISTOR >
(EC79i)
C129 1-126-960-11 ELECT 1uF 20% 50V JR101 1-216-864-11 SHORT CHIP 0
(EC79i) JR102 1-216-864-11 SHORT CHIP 0
C130 1-126-960-11 ELECT 1uF 20% 50V JR103 1-216-864-11 SHORT CHIP 0
(EC79i)
C141 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V < TRANSISTOR >

C142 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V Q141 6-551-270-01 TRANSISTOR 2SA2026
C151 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V Q142 6-551-270-01 TRANSISTOR 2SA2026
(EC79i) Q151 6-551-270-01 TRANSISTOR 2SA2026 (EC79i)
C152 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V Q152 6-551-270-01 TRANSISTOR 2SA2026 (EC79i)
(EC79i)
C160 1-165-621-91 CERAMIC CHIP 0.1uF 50V
C161 1-165-621-91 CERAMIC CHIP 0.1uF 50V

55
HCD-EC69i/EC79i/EC99i
2CH-4CH AMP 3CH AMP

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
< RESISTOR > R144 1-216-837-11 METAL CHIP 22K 5% 1/10W

R103 1-216-820-11 METAL CHIP 820 5% 1/10W R145 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(EC79i) R146 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R103 1-216-822-11 METAL CHIP 1.2K 5% 1/10W R151 1-216-822-11 METAL CHIP 1.2K 5% 1/10W
(EC99i) (EC79i)
R103 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R152 1-216-822-11 METAL CHIP 1.2K 5% 1/10W
(EC69i) (EC79i)
R104 1-216-820-11 METAL CHIP 820 5% 1/10W R153 1-216-837-11 METAL CHIP 22K 5% 1/10W
(EC79i) (EC79i)
R104 1-216-822-11 METAL CHIP 1.2K 5% 1/10W
(EC99i) R154 1-216-837-11 METAL CHIP 22K 5% 1/10W
(EC79i)
R104 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R155 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(EC69i) (EC79i)
R105 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R156 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(EC69i) (EC79i)
R105 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R160 1-216-813-11 METAL CHIP 220 5% 1/10W
(EC79i/EC99i) R161 1-216-813-11 METAL CHIP 220 5% 1/10W
R106 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
(EC69i) R162 1-216-813-11 METAL CHIP 220 5% 1/10W
R106 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R163 1-216-813-11 METAL CHIP 220 5% 1/10W
(EC79i/EC99i) R164 1-216-813-11 METAL CHIP 220 5% 1/10W
(EC79i)
R107 1-216-841-11 METAL CHIP 47K 5% 1/10W R165 1-216-813-11 METAL CHIP 220 5% 1/10W
R108 1-216-841-11 METAL CHIP 47K 5% 1/10W (EC79i)
R109 1-216-817-11 METAL CHIP 470 5% 1/10W R166 1-216-813-11 METAL CHIP 220 5% 1/10W
R110 1-216-817-11 METAL CHIP 470 5% 1/10W (EC79i)
0 R111 1-216-361-31 METAL OXIDE 0.22 5% 2W F
R167 1-216-813-11 METAL CHIP 220 5%
1/10W
0 R112 1-216-361-31 METAL OXIDE 0.22 5% 2W F (EC79i)
R113 1-216-841-11 METAL CHIP 47K 5% 1/10W ************************************************************
R114 1-216-841-11 METAL CHIP 47K 5% 1/10W
R115 1-216-823-11 METAL CHIP 1.5K 5% 1/10W 3CH AMP BOARD (EC99i)
R116 1-216-823-11 METAL CHIP 1.5K 5% 1/10W ********************

R119 1-216-809-11 METAL CHIP 100 5% 1/10W < CAPACITOR >

R120 1-216-821-11 METAL CHIP 1K 5% 1/10W
R123 1-216-820-11 METAL CHIP 820 5% 1/10W C201 1-126-960-11 ELECT 1uF 20% 50V
(EC79i) C202 1-126-960-11 ELECT 1uF 20% 50V
R124 1-216-820-11 METAL CHIP 820 5% 1/10W C203 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
(EC79i) C204 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
R125 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C205 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
(EC79i)
C206 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
R126 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C207 1-126-960-11 ELECT 1uF 20% 50V
(EC79i) C208 1-126-960-11 ELECT 1uF 20% 50V
R127 1-216-841-11 METAL CHIP 47K 5% 1/10W C209 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V
(EC79i) C210 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V
R128 1-216-841-11 METAL CHIP 47K 5% 1/10W
(EC79i) C211 1-126-960-11 ELECT 1uF 20% 50V
R129 1-216-817-11 METAL CHIP 470 5% 1/10W C212 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
(EC79i) C213 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
R130 1-216-817-11 METAL CHIP 470 5% 1/10W C214 1-126-947-11 ELECT 47uF 20% 35V
(EC79i) C215 1-162-908-11 CERAMIC CHIP 3PF 0.25PF 50V

0 R131 1-216-361-31 METAL OXIDE 0.22 5% 2W F C216 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EC79i) C217 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
0 R132 1-216-361-31 METAL OXIDE 0.22 5% 2W F C218 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
(EC79i) C219 1-128-576-11 ELECT 100uF 20% 63V
R133 1-216-841-11 METAL CHIP 47K 5% 1/10W C220 1-128-576-11 ELECT 100uF 20% 63V
(EC79i)
R134 1-216-841-11 METAL CHIP 47K 5% 1/10W C223 1-165-621-91 CERAMIC CHIP 0.1uF 50V
(EC79i) C224 1-165-621-91 CERAMIC CHIP 0.1uF 50V
R135 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C225 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
(EC79i) C226 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C227 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R136 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
(EC79i) C228 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
R141 1-216-822-11 METAL CHIP 1.2K 5% 1/10W C229 1-165-621-91 CERAMIC CHIP 0.1uF 50V
R142 1-216-822-11 METAL CHIP 1.2K 5% 1/10W C230 1-165-621-91 CERAMIC CHIP 0.1uF 50V
R143 1-216-837-11 METAL CHIP 22K 5% 1/10W

56
 HCD-EC69i/EC79i/EC99i
3CH AMP CD

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
< CONNECTOR > R245 1-216-817-11 METAL CHIP 470 5% 1/10W
R246 1-216-817-11 METAL CHIP 470 5% 1/10W
CN203 1-568-826-11 CONNECTOR, FFC 7P ************************************************************
CN205 1-820-831-11 HOLDER, CABLE 7P
A-1217-914-A CD BOARD, COMPLETE
< DIODE > ******************

D201 6-500-335-01 DIODE MC2838-T112-1 < CAPACITOR >

D202 6-501-817-01 DIODE MA2J1110GLS0
D203 6-501-817-01 DIODE MA2J1110GLS0 C100 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C101 1-164-360-11 CERAMIC CHIP 0.1uF 16V
< IC > C102 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C103 1-164-360-11 CERAMIC CHIP 0.1uF 16V
IC201 6-712-141-01 IC STK433-330-E C104 1-164-360-11 CERAMIC CHIP 0.1uF 16V

< JUMPER RESISTOR > C105 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C106 1-128-995-21 ELECT CHIP 100uF 20% 10V
JR201 1-216-864-11 SHORT CHIP 0 C107 1-164-360-11 CERAMIC CHIP 0.1uF 16V
JR202 1-216-864-11 SHORT CHIP 0 C108 1-164-360-11 CERAMIC CHIP 0.1uF 16V
C109 1-164-360-11 CERAMIC CHIP 0.1uF 16V
< TRANSISTOR >
C110 1-164-360-11 CERAMIC CHIP 0.1uF 16V
Q201 6-551-270-01 TRANSISTOR 2SA2026 C112 1-164-360-11 CERAMIC CHIP 0.1uF 16V
Q202 6-551-270-01 TRANSISTOR 2SA2026 C113 1-164-360-11 CERAMIC CHIP 0.1uF 16V
Q203 6-551-270-01 TRANSISTOR 2SA2026 C115 1-124-778-00 ELECT CHIP 22uF 20% 6.3V
C116 1-164-360-11 CERAMIC CHIP 0.1uF 16V
< RESISTOR >
C117 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
R203 1-216-822-11 METAL CHIP 1.2K 5% 1/10W C118 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R204 1-216-822-11 METAL CHIP 1.2K 5% 1/10W C119 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
R205 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C120 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R206 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C122 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
R207 1-216-841-11 METAL CHIP 47K 5% 1/10W
C123 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
R208 1-216-841-11 METAL CHIP 47K 5% 1/10W C124 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
R209 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C125 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
R210 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C126 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
R213 1-216-841-11 METAL CHIP 47K 5% 1/10W C127 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
R214 1-216-841-11 METAL CHIP 47K 5% 1/10W
C128 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V
R216 1-216-813-11 METAL CHIP 220 5% 1/10W C130 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V
R217 1-216-837-11 METAL CHIP 22K 5% 1/10W C132 1-164-360-11 CERAMIC CHIP 0.1uF 16V
R218 1-216-841-11 METAL CHIP 47K 5% 1/10W C133 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
R219 1-216-821-11 METAL CHIP 1K 5% 1/10W C136 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
R220 1-216-817-11 METAL CHIP 470 5% 1/10W
C137 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R221 1-216-841-11 METAL CHIP 47K 5% 1/10W C138 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
R222 1-216-809-11 METAL CHIP 100 5% 1/10W C139 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R223 1-216-821-11 METAL CHIP 1K 5% 1/10W C140 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R225 1-216-813-11 METAL CHIP 220 5% 1/10W C141 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
R226 1-216-813-11 METAL CHIP 220 5% 1/10W
C142 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
R227 1-216-813-11 METAL CHIP 220 5% 1/10W C143 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
R228 1-216-813-11 METAL CHIP 220 5% 1/10W C144 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
0 R229 1-216-361-31 METAL OXIDE 0.22 5% 2W F C145 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
0 R230 1-216-361-31 METAL OXIDE 0.22 5% 2W F C146 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
R231 1-216-822-11 METAL CHIP 1.2K 5% 1/10W
C147 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
R232 1-216-822-11 METAL CHIP 1.2K 5% 1/10W C148 1-162-923-11 CERAMIC CHIP 47PF 5% 50V
R233 1-216-837-11 METAL CHIP 22K 5% 1/10W C149 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
R234 1-216-837-11 METAL CHIP 22K 5% 1/10W C150 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R235 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C151 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
R236 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
C152 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
0 R237 1-216-365-61 METAL OXIDE 0.47 5% 2W F C153 1-164-360-11 CERAMIC CHIP 0.1uF 16V
0 R238 1-216-365-61 METAL OXIDE 0.47 5% 2W F C201 1-128-995-21 ELECT CHIP 100uF 20% 10V
R239 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C202 1-128-995-21 ELECT CHIP 100uF 20% 10V
R240 1-216-837-11 METAL CHIP 22K 5% 1/10W C204 1-164-360-11 CERAMIC CHIP 0.1uF 16V
R241 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
C205 1-164-360-11 CERAMIC CHIP 0.1uF 16V
R242 1-216-823-11 METAL CHIP 1.5K 5% 1/10W C206 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
R244 1-216-864-11 SHORT CHIP 0 C207 1-165-908-11 CERAMIC CHIP 1uF 10% 10V

57
HCD-EC69i/EC79i/EC99i
CD IP

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C301 1-164-360-11 CERAMIC CHIP 0.1uF 16V R154 1-216-857-11 METAL CHIP 1M 5% 1/10W
C302 1-137-710-91 CERAMIC CHIP 10uF 20% 6.3V R155 1-216-805-11 METAL CHIP 47 5% 1/10W
R156 1-216-809-11 METAL CHIP 100 5% 1/10W
C303 1-137-710-91 CERAMIC CHIP 10uF 20% 6.3V R157 1-216-809-11 METAL CHIP 100 5% 1/10W
C306 1-128-995-21 ELECT CHIP 100uF 20% 10V R201 1-216-295-91 SHORT CHIP 0
C307 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
C309 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V R202 1-216-295-91 SHORT CHIP 0
C401 1-128-394-11 ELECT CHIP 220uF 20% 10V R203 1-216-809-11 METAL CHIP 100 5% 1/10W
R204 1-216-809-11 METAL CHIP 100 5% 1/10W
C403 1-164-360-11 CERAMIC CHIP 0.1uF 16V R205 1-216-809-11 METAL CHIP 100 5% 1/10W
C404 1-164-360-11 CERAMIC CHIP 0.1uF 16V R206 1-216-809-11 METAL CHIP 100 5% 1/10W
C405 1-164-360-11 CERAMIC CHIP 0.1uF 16V
R207 1-216-809-11 METAL CHIP 100 5% 1/10W
< CONNECTOR > R208 1-216-809-11 METAL CHIP 100 5% 1/10W
R209 1-216-809-11 METAL CHIP 100 5% 1/10W
CN201 1-784-833-51 CONNECTOR, FFC (LIF (NON-ZIF)) 21P R210 1-216-809-11 METAL CHIP 100 5% 1/10W
CN301 1-770-425-51 CONNECTOR, FFC/FPC 16P R211 1-216-809-11 METAL CHIP 100 5% 1/10W

< IC > R212 1-216-809-11 METAL CHIP 100 5% 1/10W

R218 1-216-845-11 METAL CHIP 100K 5% 1/10W
IC101 6-709-624-01 IC TC94A70FG-006 R219 1-216-845-11 METAL CHIP 100K 5% 1/10W
IC201 6-710-808-01 IC TK63115SCL-G@GT R220 1-216-845-11 METAL CHIP 100K 5% 1/10W
IC401 6-710-637-01 IC BA5826SFP-E2 R221 1-216-845-11 METAL CHIP 100K 5% 1/10W

< TRANSISTOR > R222 1-216-845-11 METAL CHIP 100K 5% 1/10W

R223 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q301 6-551-120-01 TRANSISTOR 2SA2119K R301 1-216-845-11 METAL CHIP 100K 5% 1/10W
R302 1-216-864-11 SHORT CHIP 0
< RESISTOR > R303 1-216-789-11 METAL CHIP 2.2 5% 1/10W

R101 1-216-813-11 METAL CHIP 220 5% 1/10W R304 1-216-789-11 METAL CHIP 2.2 5% 1/10W
R102 1-216-833-11 METAL CHIP 10K 5% 1/10W R402 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R104 1-216-295-91 SHORT CHIP 0 R405 1-216-833-11 METAL CHIP 10K 5% 1/10W
R105 1-216-857-11 METAL CHIP 1M 5% 1/10W R408 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R106 1-216-821-11 METAL CHIP 1K 5% 1/10W R414 1-216-829-11 METAL CHIP 4.7K 5% 1/10W

R108 1-216-864-11 SHORT CHIP 0 R415 1-216-841-11 METAL CHIP 47K 5% 1/10W
R110 1-216-833-11 METAL CHIP 10K 5% 1/10W
R111 1-216-809-11 METAL CHIP 100 5% 1/10W < VIBRATOR >
R112 1-216-809-11 METAL CHIP 100 5% 1/10W
R113 1-216-833-11 METAL CHIP 10K 5% 1/10W X102 1-795-101-21 VIBRATOR, CERAMIC (16.9344MHz)
************************************************************
R114 1-216-833-11 METAL CHIP 10K 5% 1/10W
R118 1-216-845-11 METAL CHIP 100K 5% 1/10W IP BOARD
R120 1-216-864-11 SHORT CHIP 0 ********
R125 1-216-864-11 SHORT CHIP 0
R126 1-216-864-11 SHORT CHIP 0 < CAPACITOR >

R127 1-216-864-11 SHORT CHIP 0 C903 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R128 1-216-853-11 METAL CHIP 470K 5% 1/10W C904 1-164-156-11 CERAMIC CHIP 0.1uF 25V
R129 1-216-821-11 METAL CHIP 1K 5% 1/10W C907 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R130 1-216-829-11 METAL CHIP 4.7K 5% 1/10W C908 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
R134 1-216-857-11 METAL CHIP 1M 5% 1/10W C909 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

R135 1-216-853-11 METAL CHIP 470K 5% 1/10W < CONNECTOR >

R136 1-216-837-11 METAL CHIP 22K 5% 1/10W
R139 1-216-841-11 METAL CHIP 47K 5% 1/10W CN902 1-820-701-11 PIN, CONNECTOR 30P (iPod Dock)
R140 1-216-864-11 SHORT CHIP 0
R142 1-216-837-11 METAL CHIP 22K 5% 1/10W < DIODE >

R143 1-216-841-11 METAL CHIP 47K 5% 1/10W D901 8-719-071-34 DIODE RB521S-30-TE61
R144 1-216-837-11 METAL CHIP 22K 5% 1/10W D902 6-502-733-01 LED SML-E12UWT86R (iPod INDICATOR)
R145 1-216-864-11 SHORT CHIP 0 (EC79i/EC99i)
R146 1-216-864-11 SHORT CHIP 0 D906 6-502-733-01 LED SML-E12UWT86R (iPod INDICATOR)
R147 1-216-864-11 SHORT CHIP 0 (EC79i/EC99i)

R148 1-216-864-11 SHORT CHIP 0 < RESISTOR >

R149 1-216-864-11 SHORT CHIP 0
R150 1-216-864-11 SHORT CHIP 0 R901 1-216-809-11 METAL CHIP 100 5% 1/10W
R151 1-216-864-11 SHORT CHIP 0 R902 1-216-809-11 METAL CHIP 100 5% 1/10W
R153 1-216-857-11 METAL CHIP 1M 5% 1/10W R903 1-216-809-11 METAL CHIP 100 5% 1/10W
R904 1-216-809-11 METAL CHIP 100 5% 1/10W

58
 HCD-EC69i/EC79i/EC99i
Ver. 1.1
IP JACK KEY LOADING MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R905 1-218-895-11 METAL CHIP 100K 0.5% 1/10W
SW325 1-771-410-21 SWITCH, TACTILE (DSGX)
R906 1-218-895-11 METAL CHIP 100K 0.5% 1/10W SW326 1-771-410-21 SWITCH, TACTILE (Z) (EC79i: UK, AUS/EC99i)
R907 1-218-892-11 METAL CHIP 75K 0.5% 1/10W ************************************************************
R908 1-218-895-11 METAL CHIP 100K 0.5% 1/10W
R909 1-218-895-11 METAL CHIP 100K 0.5% 1/10W LOADING BOARD (EC79i: UK, AUS/EC99i)
R910 1-218-892-11 METAL CHIP 75K 0.5% 1/10W **************

R911 1-218-907-11 METAL CHIP 330K 0.5% 1/10W When the LOADING board is damaged, exchange the entire CDM76A Assy (EC79i:
R912 1-218-903-11 METAL CHIP 220K 0.5% 1/10W UK, Australian/EC99i).
R913 1-216-809-11 METAL CHIP 100 5% 1/10W ************************************************************
R914 1-216-809-11 METAL CHIP 100 5% 1/10W
R917 1-216-811-11 METAL CHIP 150 5% 1/10W A-1599-061-A MAIN BOARD, COMPLETE (EC99i: US, CND)
(EC79i/EC99i) A-1599-076-A MAIN BOARD, COMPLETE (EC99i: UK, AUS)
A-1599-082-A MAIN BOARD, COMPLETE (EC79i: US, CND)
R920 1-216-811-11 METAL CHIP 150 5%
1/10W A-1599-088-A MAIN BOARD, COMPLETE (EC79i: UK, AUS)
(EC79i/EC99i) A-1599-114-A MAIN BOARD, COMPLETE (EC69i: US, CND)
************************************************************
A-1599-131-A MAIN BOARD, COMPLETE (EC69i: UK, AUS)
JACK BOARD ********************
**********
7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S (EC99i)
< CAPACITOR >
< CAPACITOR >
C495 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C496 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C601 1-126-962-11 ELECT 3.3uF 20% 50V
C602 1-126-947-11 ELECT 47uF 20% 35V
< CONNECTOR > C603 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EC79i/EC99i)
CN496 1-784-770-11 CONNECTOR, FFC 9P (EC79i/EC99i) C604 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
CN497 1-568-826-11 CONNECTOR, FFC 7P (EC69i) (EC79i/EC99i)
C605 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
< DIODE > (EC79i/EC99i)

D491 8-719-062-51 DIODE 1PS226-115 (EC79i/EC99i) C606 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EC79i/EC99i)
< JACK > C607 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C608 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
J491 1-566-822-51 JACK (PC IN) (EC79i/EC99i) C609 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
J492 1-815-629-21 JACK (PHONES) C610 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V

< RESISTOR > C611 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V
C612 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V
R491 1-216-837-11 METAL CHIP 22K 5%
1/10W C613 1-126-964-11 ELECT 10uF 20% 50V
(EC79i/EC99i) C614 1-126-963-11 ELECT 4.7uF 20% 50V
R492 1-216-837-11 METAL CHIP 22K 5% 1/10W C615 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
(EC79i/EC99i) (EC79i/EC99i)
************************************************************
C616 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
KEY BOARD (EC79i/EC99i)
********* C617 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
C618 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V
< CONNECTOR > C619 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C620 1-104-658-91 ELECT 100uF 20% 10V
CN313 1-815-551-11 PIN, CONNECTOR (PWB) 3P
C621 1-130-777-00 MYLAR 0.1uF 5% 100V
< RESISTOR > C622 1-114-471-51 ELECT 3300uF 20% 63V
(EC79i/EC99i)
R404 1-216-822-11 METAL CHIP 1.2K 5% 1/10W C622 1-128-550-11 ELECT 2200uF 20% 50V
R405 1-216-823-11 METAL CHIP 1.5K 5% 1/10W (EC69i)
R406 1-216-825-11 METAL CHIP 2.2K 5% 1/10W C623 1-130-777-00 MYLAR 0.1uF 5% 100V
R407 1-216-826-11 METAL CHIP 2.7K 5% 1/10W C624 1-126-923-91 ELECT 220uF 20% 10V
R408 1-216-828-11 METAL CHIP 3.9K 5% 1/10W (EC79i/EC99i)
(EC79i: UK, AUS/EC99i)
C626 1-114-471-51 ELECT 3300uF 20% 63V
< SWITCH > (EC79i/EC99i)
C626 1-128-550-11 ELECT 2200uF 20% 50V
SW311 1-771-410-21 SWITCH, TACTILE (x) (EC69i)
SW321 1-771-410-21 SWITCH, TACTILE (CD) C627 1-126-943-11 ELECT 2200uF 20% 25V
SW322 1-771-410-21 SWITCH, TACTILE (iPod) C628 1-126-942-61 ELECT 1000uF 20% 25V
SW323 1-771-410-21 SWITCH, TACTILE (FOLDER +) C629 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
SW324 1-771-410-21 SWITCH, TACTILE (TUNING +, M L)

59
HCD-EC69i/EC79i/EC99i
Ver. 1.1
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C630 1-126-947-11 ELECT 47uF 20% 35V C705 1-126-964-11 ELECT 10uF 20% 50V
C631 1-126-933-11 ELECT 100uF 20% 16V (EC99i)
C632 1-126-963-11 ELECT 4.7uF 20% 50V
C633 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C706 1-126-933-11 ELECT 100uF 20% 16V
C634 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V (EC99i)
C707 1-126-960-11 ELECT 1uF 20% 50V
C636 1-126-960-11 ELECT 1uF 20% 50V (EC99i)
C637 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C708 1-107-726-91 CERAMIC CHIP 0.01uF 10% 16V
C638 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V (EC99i)
C639 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C709 1-137-190-91 FILM 0.22uF 5% 50V
C640 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V (EC99i)
C710 1-137-190-91 FILM 0.22uF 5% 50V
C641 1-126-962-11 ELECT 3.3uF 20% 50V (EC99i)
C642 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V
C644 1-126-960-11 ELECT 1uF 20% 50V C711 1-137-190-91 FILM 0.22uF 5% 50V
C645 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V (EC99i)
C646 1-126-960-11 ELECT 1uF 20% 50V C712 1-136-161-00 FILM 0.047uF 5% 50V
(EC99i)
C647 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C713 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C648 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C715 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C649 1-162-960-11 CERAMIC CHIP 220PF 10% 50V C760 1-104-665-11 ELECT 100uF 20% 25V
(EC79i/EC99i)
C650 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C761 1-126-935-11 ELECT 470uF 20% 16V
(EC79i/EC99i) C762 1-126-925-91 ELECT 470uF 20% 10V
C652 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C763 1-164-315-11 CERAMIC CHIP 470PF 5% 50V
C764 1-126-964-11 ELECT 10uF 20% 50V
C654 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C765 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C655 1-162-960-11 CERAMIC CHIP 220PF 10% 50V
(EC79i/EC99i) C766 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
C656 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C772 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
(EC79i/EC99i) C773 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C657 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C775 1-126-947-11 ELECT 47uF 20% 35V
C658 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C776 1-104-662-91 ELECT 22uF 20% 25V

C661 1-126-964-11 ELECT 10uF 20% 50V C786 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C662 1-162-967-11 CERAMIC CHIP 0.0033uF 10% 50V C787 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C663 1-126-960-11 ELECT 1uF 20% 50V C802 1-126-933-11 ELECT 100uF 20% 16V
C664 1-126-960-11 ELECT 1uF 20% 50V C803 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C665 1-126-960-11 ELECT 1uF 20% 50V C804 1-162-918-11 CERAMIC CHIP 18PF 5% 50V

C666 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C805 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C667 1-126-933-11 ELECT 100uF 20% 16V C806 1-162-962-11 CERAMIC CHIP 470PF 10% 50V
C674 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C807 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C684 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C808 1-162-918-11 CERAMIC CHIP 18PF 5% 50V
(EC79i/EC99i) C809 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C684 1-110-563-11 CERAMIC CHIP 0.068uF 10% 16V
(EC69i) C810 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C811 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C685 1-100-756-91 CERAMIC CHIP 0.047uF 10% 50V C814 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EC69i) (EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS)
C685 1-110-563-11 CERAMIC CHIP 0.068uF 10% 16V C814 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
(EC79i/EC99i) (EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
C686 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C815 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V
(EC79i/EC99i) (EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS)
C686 1-110-563-11 CERAMIC CHIP 0.068uF 10% 16V
(EC69i) C815 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C687 1-100-756-91 CERAMIC CHIP 0.047uF 10% 50V (EC69i: US, CND/EC79i: US, CND/EC99i: US, CND)
(EC69i) C816 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C817 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
C687 1-110-563-11 CERAMIC CHIP 0.068uF 10% 16V C819 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
(EC79i/EC99i) C820 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V
C688 1-126-964-11 ELECT 10uF 20% 50V
C694 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C821 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V
C695 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C822 1-126-965-91 ELECT 22uF 20% 50V
C696 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V C823 1-126-923-91 ELECT 220uF 20% 10V
C824 1-165-908-11 CERAMIC CHIP 1uF 10% 10V
C699 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C826 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C700 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V
C701 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C827 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V
(EC99i) C828 1-162-927-11 CERAMIC CHIP 100PF 5% 50V
C702 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V C829 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
(EC99i) C830 1-162-907-11 CERAMIC CHIP 2PF 0.25PF 50V

60
 HCD-EC69i/EC79i/EC99i
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C831 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V D627 8-719-062-51 DIODE 1PS226-115
D628 6-501-817-01 DIODE MA2J1110GLS0
C832 1-117-863-11 CERAMIC CHIP 0.47uF 10% 6.3V
C833 1-126-923-91 ELECT 220uF 20% 10V D629 6-501-582-01 DIODE 1N4002-A2 (EC79i/EC99i)
C834 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V D630 6-501-582-01 DIODE 1N4002-A2 (EC79i/EC99i)
C835 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V D631 6-501-817-01 DIODE MA2J1110GLS0
C836 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V D701 6-502-161-01 DIODE RB055L-40TE25
D702 6-501-817-01 DIODE MA2J1110GLS0 (EC99i)
C837 1-162-915-11 CERAMIC CHIP 10PF 0.5PF 50V
C838 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V D791 6-501-817-01 DIODE MA2J1110GLS0
C840 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V D801 6-502-623-01 DIODE SVC389
C841 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V D802 8-719-062-51 DIODE 1PS226-115
C843 1-164-156-11 CERAMIC CHIP 0.1uF 25V D803 6-501-369-01 DIODE SVC230-TB-E
D804 6-501-369-01 DIODE SVC230-TB-E
C844 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V
C845 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V D805 8-719-062-51 DIODE 1PS226-115
C846 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V D806 8-719-062-51 DIODE 1PS226-115
C847 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V D807 8-719-062-51 DIODE 1PS226-115
C848 1-164-156-11 CERAMIC CHIP 0.1uF 25V
< FILTER >
C851 1-164-392-11 CERAMIC CHIP 390PF 5% 50V
C853 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V FL801 1-760-393-11 FILTER, CERAMIC
(EC99i) FL803 1-236-711-21 FILTER, BAND PASS
C857 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V
(EC69i: US, CND/EC79i: US, CND/EC99i: US, CND) < IC >

< FILTER > IC602 6-712-055-01 IC BD3499FV-E2

IC701 6-600-113-01 IC NJM2368V (TE2)
CF801 1-781-962-21 FILTER, CERAMIC IC770 8-759-278-58 IC NJM4558V-TE2
IC801 6-708-840-01 IC LV23003VA
< CONNECTOR >
< JUMPER RESISTOR >
CN601 1-819-131-11 PIN, CONNECTOR 3P
CN603 1-784-766-11 CONNECTOR, FFC 5P JR600 1-216-864-11 SHORT CHIP 0
CN604 1-819-136-11 PIN, CONNECTOR 8P (EC69i/EC79i) JR601 1-216-864-11 SHORT CHIP 0
CN605 1-784-770-11 CONNECTOR, FFC 9P (EC79i/EC99i) JR602 1-216-864-11 SHORT CHIP 0
CN606 1-568-826-11 CONNECTOR, FFC 7P (EC69i) JR603 1-216-864-11 SHORT CHIP 0
JR605 1-216-864-11 SHORT CHIP 0
CN607 1-784-786-11 CONNECTOR, FFC 25P
CN609 1-815-444-11 PIN, CONNECTOR (PWB) 3P JR607 1-216-864-11 SHORT CHIP 0
CN632 1-819-135-11 PIN, CONNECTOR 7P (EC79i/EC99i) JR608 1-216-864-11 SHORT CHIP 0
CN633 1-819-133-11 PIN, CONNECTOR (EC69i/EC99i) JR609 1-216-864-11 SHORT CHIP 0
CN643 1-568-826-11 CONNECTOR, FFC 7P (EC99i) JR610 1-216-864-11 SHORT CHIP 0
JR614 1-216-864-11 SHORT CHIP 0
CN653 1-568-830-11 CONNECTOR, FFC 11P
CN654 1-819-138-11 PIN, CONNECTOR 10P (EC99i) JR615 1-216-864-11 SHORT CHIP 0
* CN801 1-506-680-11 PLUG, CONNECTOR (2.5mm) 3P JR617 1-216-864-11 SHORT CHIP 0
(ANTENNA FM/AM) JR618 1-216-864-11 SHORT CHIP 0
JR619 1-216-864-11 SHORT CHIP 0
< DIODE > JR620 1-216-864-11 SHORT CHIP 0

D601 6-500-335-01 DIODE MC2838-T112-1 < COIL >

D602 6-500-335-01 DIODE MC2838-T112-1
D603 6-501-817-01 DIODE MA2J1110GLS0 (EC79i/EC99i) L601 1-456-107-11 COIL, AIR-CORE (EC79i/EC99i)
D604 6-501-817-01 DIODE MA2J1110GLS0 L602 1-456-107-11 COIL, AIR-CORE (EC79i/EC99i)
D605 6-501-817-01 DIODE MA2J1110GLS0 L603 1-456-107-11 COIL, AIR-CORE
L604 1-456-107-11 COIL, AIR-CORE
D606 6-500-334-01 DIODE MC2836-T112-1 L701 1-456-467-11 INDUCTOR 100uH
D607 6-502-619-01 DIODE 1N5402-C532-2 (EC69i/EC79i)
D608 6-502-619-01 DIODE 1N5402-C532-2 (EC69i/EC79i) L702 1-456-107-11 COIL, AIR-CORE (EC99i)
D609 6-502-619-01 DIODE 1N5402-C532-2 (EC69i/EC79i) L802 1-457-168-11 COIL, DET
D610 6-502-619-01 DIODE 1N5402-C532-2 (EC69i/EC79i) L803 1-457-162-22 COIL, AIR-CORE
L804 1-457-163-22 COIL, AIR-CORE
D611 6-501-582-01 DIODE 1N4002-A2 L805 1-457-161-11 COIL, AM ANTENNA
D612 6-501-582-01 DIODE 1N4002-A2
D613 6-500-360-01 DIODE D10XB20 (EC99i) L806 1-410-522-11 INDUCTOR 120uH
D614 6-501-817-01 DIODE MA2J1110GLS0
D615 6-501-582-01 DIODE 1N4002-A2 < TRANSISTOR >

D617 6-500-335-01 DIODE MC2838-T112-1 Q601 8-729-037-03 TRANSISTOR KTA1266GR-AT (EC69i)

D621 6-501-722-01 DIODE MAZ8043GMLS0 Q601 8-729-040-76 TRANSISTOR KTA1273-Y-AT (EC79i/EC99i)
D622 6-501-760-01 DIODE MAZ8100GMLS0 Q602 8-729-120-28 TRANSISTOR 2SC1623-L5L6

61
HCD-EC69i/EC79i/EC99i
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
Q603 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R626 1-216-833-11 METAL CHIP 10K 5% 1/10W
Q604 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R627 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R628 1-216-833-11 METAL CHIP 10K 5% 1/10W
Q605 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R629 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
Q606 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q607 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC79i/EC99i) R630 1-216-841-11 METAL CHIP 47K 5% 1/10W
Q608 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R631 1-216-797-11 METAL CHIP 10 5% 1/10W
Q610 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) (EC79i/EC99i)
R632 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q611 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC79i/EC99i)
Q612 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF R633 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q613 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF (EC99i) (EC79i/EC99i)
Q614 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF (EC99i) R634 1-249-403-11 CARBON 68 5% 1/4W
Q618 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF (EC79i/EC99i)

Q619 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R635 1-249-403-11 CARBON 68 5% 1/4W

Q701 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) (EC79i/EC99i)
Q702 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) R636 1-249-403-11 CARBON 68 5% 1/4W
Q703 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) (EC79i/EC99i)
Q704 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) R637 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R638 1-249-403-11 CARBON 68 5% 1/4W
Q705 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) R639 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q706 8-729-040-76 TRANSISTOR KTA1273-Y-AT
Q707 8-729-040-76 TRANSISTOR KTA1273-Y-AT R640 1-216-845-11 METAL CHIP 100K 5% 1/10W
Q708 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R641 1-249-403-11 CARBON 68 5% 1/4W
Q709 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R642 1-249-403-11 CARBON 68 5% 1/4W
R643 1-216-833-11 METAL CHIP 10K 5% 1/10W
Q710 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF R644 1-216-821-11 METAL CHIP 1K 5% 1/10W
Q801 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q802 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R645 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
Q804 8-729-120-28 TRANSISTOR 2SC1623-L5L6 (EC99i) R646 1-216-809-11 METAL CHIP 100 5% 1/10W
R647 1-216-797-11 METAL CHIP 10 5% 1/10W
< RESISTOR > R648 1-216-841-11 METAL CHIP 47K 5% 1/10W
R649 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R601 1-216-817-11 METAL CHIP 470 5% 1/10W
R603 1-216-801-11 METAL CHIP 22 5% 1/10W R650 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R604 1-216-845-11 METAL CHIP 100K 5% 1/10W R651 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R605 1-216-801-11 METAL CHIP 22 5% 1/10W R652 1-216-809-11 METAL CHIP 100 5% 1/10W
R606 1-216-797-11 METAL CHIP 10 5% 1/10W R655 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC79i/EC99i) R656 1-216-821-11 METAL CHIP 1K 5% 1/10W

R607 1-216-797-11 METAL CHIP 10 5% 1/10W R657 1-216-843-11 METAL CHIP 68K 5% 1/10W
(EC79i/EC99i) 0 R658 1-215-890-51 METAL OXIDE 470 5% 2W F
R608 1-216-797-11 METAL CHIP 10 5% 1/10W R659 1-216-845-11 METAL CHIP 100K 5% 1/10W
(EC79i/EC99i) (EC99i)
R609 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R660 1-216-837-11 METAL CHIP 22K 5% 1/10W
R610 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (EC79i/EC99i)
R611 1-216-797-11 METAL CHIP 10 5% 1/10W R661 1-216-837-11 METAL CHIP 22K 5% 1/10W
(EC79i/EC99i)
R612 1-216-797-11 METAL CHIP 10 5% 1/10W
R613 1-216-833-11 METAL CHIP 10K 5% 1/10W 0 R662 1-215-890-51 METAL OXIDE 470 5% 2W F
R614 1-216-833-11 METAL CHIP 10K 5% 1/10W R664 1-216-845-11 METAL CHIP 100K 5% 1/10W
R615 1-216-797-11 METAL CHIP 10 5% 1/10W R665 1-216-845-11 METAL CHIP 100K 5% 1/10W
R616 1-216-828-11 METAL CHIP 3.9K 5% 1/10W R666 1-216-821-11 METAL CHIP 1K 5% 1/10W
(EC69i) R667 1-216-841-11 METAL CHIP 47K 5% 1/10W

R616 1-216-835-11 METAL CHIP 15K 5% 1/10W R668 1-216-837-11 METAL CHIP 22K 5% 1/10W
(EC79i/EC99i) R669 1-216-845-11 METAL CHIP 100K 5% 1/10W
R617 1-216-833-11 METAL CHIP 10K 5% 1/10W R670 1-216-833-11 METAL CHIP 10K 5% 1/10W
R618 1-216-833-11 METAL CHIP 10K 5% 1/10W R672 1-216-833-11 METAL CHIP 10K 5% 1/10W
R619 1-216-828-11 METAL CHIP 3.9K 5% 1/10W R673 1-216-817-11 METAL CHIP 470 5% 1/10W
(EC69i)
R619 1-216-835-11 METAL CHIP 15K 5% 1/10W R674 1-249-401-11 CARBON 47 5% 1/4W
(EC79i/EC99i) R675 1-249-401-11 CARBON 47 5% 1/4W
R676 1-216-833-11 METAL CHIP 10K 5% 1/10W
R620 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R677 1-216-833-11 METAL CHIP 10K 5% 1/10W
R621 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R678 1-216-841-11 METAL CHIP 47K 5% 1/10W
R622 1-216-839-11 METAL CHIP 33K 5% 1/10W
R623 1-216-833-11 METAL CHIP 10K 5% 1/10W R679 1-216-837-11 METAL CHIP 22K 5% 1/10W
R624 1-216-833-11 METAL CHIP 10K 5% 1/10W (EC79i/EC99i)
R680 1-216-837-11 METAL CHIP 22K 5% 1/10W
R625 1-216-839-11 METAL CHIP 33K 5% 1/10W (EC79i/EC99i)

62
 HCD-EC69i/EC79i/EC99i
MAIN

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R681 1-216-837-11 METAL CHIP 22K 5% 1/10W R742 1-216-789-11 METAL CHIP 2.2 5% 1/10W
R684 1-216-837-11 METAL CHIP 22K 5% 1/10W
R685 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R744 1-216-797-11 METAL CHIP 10 5% 1/10W
(EC99i)
R686 1-216-842-11 METAL CHIP 56K 5% 1/10W R745 1-216-797-11 METAL CHIP 10 5% 1/10W
R687 1-216-837-11 METAL CHIP 22K 5% 1/10W (EC99i)
R688 1-216-817-11 METAL CHIP 470 5% 1/10W R746 1-249-403-11 CARBON 68 5% 1/4W
R689 1-216-838-11 METAL CHIP 27K 5% 1/10W (EC99i)
R690 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R747 1-249-403-11 CARBON 68 5% 1/4W
(EC99i)
R691 1-216-833-11 METAL CHIP 10K 5% 1/10W R748 1-249-403-11 CARBON 68 5% 1/4W
R692 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (EC99i)
R693 1-216-821-11 METAL CHIP 1K 5% 1/10W
R696 1-216-833-11 METAL CHIP 10K 5% 1/10W R749 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R697 1-216-821-11 METAL CHIP 1K 5% 1/10W R750 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R751 1-216-830-11 METAL CHIP 5.6K 5% 1/10W
R700 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R752 1-216-830-11 METAL CHIP 5.6K 5% 1/10W
(EC79i/EC99i) R753 1-216-830-11 METAL CHIP 5.6K 5% 1/10W
R701 1-216-833-11 METAL CHIP 10K 5% 1/10W
R702 1-216-833-11 METAL CHIP 10K 5% 1/10W R754 1-216-830-11 METAL CHIP 5.6K 5% 1/10W
R704 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R755 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(EC79i/EC99i) (EC99i)
R706 1-216-813-11 METAL CHIP 220 5% 1/10W R756 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
(EC99i)
R707 1-216-813-11 METAL CHIP 220 5% 1/10W R757 1-216-841-11 METAL CHIP 47K 5% 1/10W
R708 1-216-833-11 METAL CHIP 10K 5% 1/10W (EC99i)
R709 1-216-821-11 METAL CHIP 1K 5% 1/10W R758 1-216-821-11 METAL CHIP 1K 5% 1/10W
R710 1-216-839-11 METAL CHIP 33K 5% 1/10W
(EC99i) R759 1-216-805-11 METAL CHIP 47 5% 1/10W
R711 1-216-839-11 METAL CHIP 33K 5% 1/10W R760 1-216-789-11 METAL CHIP 2.2 5% 1/10W
(EC99i) R761 1-216-817-11 METAL CHIP 470 5% 1/10W
R762 1-216-817-11 METAL CHIP 470 5% 1/10W
R712 1-216-817-11 METAL CHIP 470 5% 1/10W R763 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
(EC99i)
R713 1-216-845-11 METAL CHIP 100K 5% 1/10W R764 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
(EC99i) R765 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R714 1-216-842-11 METAL CHIP 56K 5% 1/10W R766 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC99i) (EC99i)
R715 1-216-809-11 METAL CHIP 100 5% 1/10W R767 1-216-791-11 METAL CHIP 3.3 5% 1/10W
R721 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R768 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC99i)
R769 1-216-805-11 METAL CHIP 47 5% 1/10W
R723 1-216-789-11 METAL CHIP 2.2 5% 1/10W R770 1-216-845-11 METAL CHIP 100K 5% 1/10W
R724 1-249-395-11 CARBON 15 5% 1/4W R771 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R725 1-249-395-11 CARBON 15 5% 1/4W R772 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R726 1-249-395-11 CARBON 15 5% 1/4W R773 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R727 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R774 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R728 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R775 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R729 1-216-821-11 METAL CHIP 1K 5% 1/10W R776 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R730 1-216-841-11 METAL CHIP 47K 5% 1/10W R777 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
(EC99i) R778 1-218-879-11 METAL CHIP 22K 0.5% 1/10W
R731 1-216-809-11 METAL CHIP 100 5% 1/10W
R732 1-216-809-11 METAL CHIP 100 5% 1/10W R779 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R780 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R733 1-216-845-11 METAL CHIP 100K 5% 1/10W R781 1-216-845-11 METAL CHIP 100K 5% 1/10W
(EC99i) R782 1-216-833-11 METAL CHIP 10K 5% 1/10W
R734 1-216-821-11 METAL CHIP 1K 5% 1/10W R783 1-216-845-11 METAL CHIP 100K 5% 1/10W
(EC99i)
R735 1-216-864-11 SHORT CHIP 0 (EC99i) R784 1-216-845-11 METAL CHIP 100K 5% 1/10W
R736 1-216-833-11 METAL CHIP 10K 5% 1/10W R785 1-216-845-11 METAL CHIP 100K 5% 1/10W
(EC99i) R786 1-216-845-11 METAL CHIP 100K 5% 1/10W
R737 1-216-833-11 METAL CHIP 10K 5% 1/10W R787 1-216-835-11 METAL CHIP 15K 5% 1/10W
(EC99i) R788 1-216-835-11 METAL CHIP 15K 5% 1/10W

R738 1-216-821-11 METAL CHIP 1K 5% 1/10W R791 1-216-845-11 METAL CHIP 100K 5% 1/10W
(EC99i) R792 1-216-849-11 METAL CHIP 220K 5% 1/10W
R739 1-216-821-11 METAL CHIP 1K 5% 1/10W R793 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
(EC99i) R794 1-216-833-11 METAL CHIP 10K 5% 1/10W
R740 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R795 1-216-848-11 METAL CHIP 180K 5% 1/10W
(EC99i)
R741 1-216-789-11 METAL CHIP 2.2 5% 1/10W R796 1-216-851-11 METAL CHIP 330K 5% 1/10W

63
HCD-EC69i/EC79i/EC99i
Ver. 1.1
MAIN PANEL

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R797 1-216-841-11 METAL CHIP 47K 5% 1/10W
R798 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R868 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R799 1-216-818-11 METAL CHIP 560 5% 1/10W (EC99i)
R801 1-216-809-11 METAL CHIP 100 5% 1/10W R869 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC99i)
R802 1-216-801-11 METAL CHIP 22 5% 1/10W R870 1-216-833-11 METAL CHIP 10K 5% 1/10W
R803 1-216-825-11 METAL CHIP 2.2K 5% 1/10W (EC99i)
R804 1-216-801-11 METAL CHIP 22 5% 1/10W R875 1-216-864-11 SHORT CHIP 0 (EC69i/EC79i)
R805 1-216-853-11 METAL CHIP 470K 5% 1/10W R876 1-216-805-11 METAL CHIP 47 5% 1/10W
R806 1-216-841-11 METAL CHIP 47K 5% 1/10W
R878 1-216-864-11 SHORT CHIP 0 (EC99i)
R807 1-216-837-11 METAL CHIP 22K 5% 1/10W R880 1-216-821-11 METAL CHIP 1K 5% 1/10W
R808 1-216-801-11 METAL CHIP 22 5% 1/10W (EC99i)
R809 1-216-809-11 METAL CHIP 100 5% 1/10W R881 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R810 1-216-829-11 METAL CHIP 4.7K 5% 1/10W (EC99i)
R811 1-216-845-11 METAL CHIP 100K 5% 1/10W R882 1-216-821-11 METAL CHIP 1K 5% 1/10W
(EC99i)
R812 1-216-841-11 METAL CHIP 47K 5% 1/10W R883 1-216-842-11 METAL CHIP 56K 5% 1/10W
R813 1-216-853-11 METAL CHIP 470K 5% 1/10W (EC79i: UK, AUS/EC99i)
R814 1-216-837-11 METAL CHIP 22K 5% 1/10W
R815 1-216-833-11 METAL CHIP 10K 5% 1/10W R883 1-216-843-11 METAL CHIP 68K 5% 1/10W
R816 1-216-821-11 METAL CHIP 1K 5% 1/10W (EC79i: US, CND)
R883 1-216-844-11 METAL CHIP 82K 5% 1/10W
R817 1-216-841-11 METAL CHIP 47K 5% 1/10W (EC69i)
R818 1-216-833-11 METAL CHIP 10K 5% 1/10W R884 1-216-864-11 SHORT CHIP 0
R819 1-216-839-11 METAL CHIP 33K 5% 1/10W
R820 1-216-829-11 METAL CHIP 4.7K 5% 1/10W < RELAY >
R821 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
RY601 1-755-307-21 RELAY (EC79i/EC99i)
R822 1-216-809-11 METAL CHIP 100 5% 1/10W RY602 1-755-307-21 RELAY
R823 1-216-833-11 METAL CHIP 10K 5% 1/10W RY701 1-755-307-21 RELAY (EC99i)
R824 1-216-817-11 METAL CHIP 470 5% 1/10W
R825 1-216-829-11 METAL CHIP 4.7K 5% 1/10W < TRANSFORMER >
R826 1-216-821-11 METAL CHIP 1K 5% 1/10W
T801 1-433-741-11 TRANSFORMER, IF
R827 1-216-845-11 METAL CHIP 100K 5% 1/10W
R829 1-216-829-11 METAL CHIP 4.7K 5% 1/10W < TERMINAL >
R830 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R831 1-216-825-11 METAL CHIP 2.2K 5% 1/10W TB601 1-780-685-11 TERMINAL BOARD (SPEAKER HIGH FREQ.
R832 1-216-857-11 METAL CHIP 1M 5% 1/10W IMPEDANCE: USE 8Ω) (EC79i/EC99i)
TB602 1-780-314-11 TERMINAL BOARD (SPEAKER IMPEDANCE:
R836 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W USE 6Ω) (EC69i)
R837 1-216-845-11 METAL CHIP 100K 5% 1/10W TB602 1-780-314-11 TERMINAL BOARD (SPEAKER LOW FREQ.
R838 1-216-837-11 METAL CHIP 22K 5% 1/10W IMPEDANCE: USE 8Ω) (EC79i/EC99i)
R839 1-216-797-11 METAL CHIP 10 5% 1/10W TB603 1-780-684-11 TERMINAL BOARD, 2P (SUBWOOFER
R840 1-216-864-11 SHORT CHIP 0 IMPEDANCE: USE 4Ω) (EC99i)

R841 1-216-833-11 METAL CHIP 10K 5% 1/10W < VIBRATOR >

R842 1-216-864-11 SHORT CHIP 0
R843 1-216-845-11 METAL CHIP 100K 5% 1/10W X801 1-813-917-11 VIBRATOR, CRYSTAL (75kHz)
R844 1-216-825-11 METAL CHIP 2.2K 5% 1/10W ************************************************************
R845 1-216-864-11 SHORT CHIP 0
A-1599-065-A PANEL BOARD, COMPLETE (EC99i: US, CND)
R846 1-216-797-11 METAL CHIP 10 5% 1/10W A-1599-078-A PANEL BOARD, COMPLETE (EC99i: AUS)
R847 1-216-864-11 SHORT CHIP 0 A-1599-084-A PANEL BOARD, COMPLETE (EC79i: US, CND)
R860 1-216-833-11 METAL CHIP 10K 5% 1/10W A-1599-090-A PANEL BOARD, COMPLETE (EC79i: UK)
(EC99i) A-1599-094-A PANEL BOARD, COMPLETE (EC79i: AUS)
R861 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC99i) A-1599-116-A PANEL BOARD, COMPLETE (EC69i: US, CND)
R862 1-216-833-11 METAL CHIP 10K 5% 1/10W A-1599-133-A PANEL BOARD, COMPLETE (EC69i: UK)
(EC99i) A-1599-136-A PANEL BOARD, COMPLETE (EC69i: AUS)
A-1731-204-A PANEL BOARD, COMPLETE (EC99i: UK)
R863 1-216-833-11 METAL CHIP 10K 5% 1/10W *********************
(EC99i)
R864 1-216-829-11 METAL CHIP 4.7K 5% 1/10W 2-649-178-01 PLATE, LIGHT GUIDE
(EC99i) 2-649-179-01 SHEET (LCD)
R865 1-216-841-11 METAL CHIP 47K 5% 1/10W 2-665-175-01 SHEET (REFLECTOR)
(EC99i)
R866 1-216-833-11 METAL CHIP 10K 5% 1/10W < CAPACITOR >
(EC99i)
R867 1-216-827-11 METAL CHIP 3.3K 5% 1/10W C301 1-164-156-11 CERAMIC CHIP 0.1uF 25V
(EC99i) C302 1-104-658-91 ELECT 100uF 20% 10V

64
 HCD-EC69i/EC79i/EC99i
Ver. 1.1
PANEL

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C303 1-126-964-11 ELECT 10uF 20% 50V < IC >
C304 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V
C305 1-126-964-11 ELECT 10uF 20% 50V IC301 A-1711-704-A IC MB90F830PF-GE1 (for SERVICE)
(EC79i: UK, AUS/EC99i)
C306 1-104-655-91 ELECT 470uF 20% 6.3V IC301 A-1711-705-A IC MB90F830PF-GE1 (for SERVICE)
C313 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V (EC69i/EC79i: US, CND)
C317 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V IC302 6-600-349-21 IC NJL23H400A
C319 1-162-918-11 CERAMIC CHIP 18PF 5% 50V IC303 8-759-598-69 IC BA6956AN (EC79i: UK, AUS/EC99i)
C320 1-162-919-11 CERAMIC CHIP 22PF 5% 50V
< LIQUID CRYSTAL DISPLAY >
C321 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C330 1-164-156-11 CERAMIC CHIP 0.1uF 25V LCD301 1-802-840-11 DISPLAY PANEL, LIQUID CRYSTAL
C332 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V (EC69i/EC79i: US, CND)
C336 1-164-156-11 CERAMIC CHIP 0.1uF 25V LCD301 1-802-841-11 DISPLAY PANEL, LIQUID CRYSTAL
C338 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V (EC79i: UK, AUS/EC99i)

C340 1-164-156-11 CERAMIC CHIP 0.1uF 25V < TRANSISTOR >

C341 1-164-156-11 CERAMIC CHIP 0.1uF 25V
C342 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V Q301 8-729-120-28 TRANSISTOR 2SC1623-L5L6
C351 1-164-156-11 CERAMIC CHIP 0.1uF 25V Q302 8-729-037-13 TRANSISTOR KTA1271Y
(EC79i: UK, AUS/EC99i) Q303 8-729-120-28 TRANSISTOR 2SC1623-L5L6
C352 1-126-964-11 ELECT 10uF 20% 50V Q304 8-729-120-28 TRANSISTOR 2SC1623-L5L6
(EC79i: UK, AUS/EC99i) Q305 8-729-120-28 TRANSISTOR 2SC1623-L5L6

C353 1-164-156-11 CERAMIC CHIP 0.1uF 25V Q306 8-729-038-28 TRANSISTOR RT1N441C-TP-1
(EC79i: UK, AUS/EC99i) Q307 8-729-038-28 TRANSISTOR RT1N441C-TP-1
C354 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V (EC79i: UK, AUS/EC99i)
(EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS) Q622 8-729-120-28 TRANSISTOR 2SC1623-L5L6
C355 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V Q624 8-729-036-86 TRANSISTOR KTC3203Y-AT
(EC69i: UK, AUS/EC79i: UK, AUS/EC99i: UK, AUS)
C357 1-126-965-91 ELECT 22uF 20% 50V < RESISTOR >
(EC79i: UK, AUS/EC99i)
C434 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V R301 1-216-809-11 METAL CHIP 100 5% 1/10W
R302 1-216-809-11 METAL CHIP 100 5% 1/10W
C669 1-126-923-91 ELECT 220uF 20% 10V R303 1-216-809-11 METAL CHIP 100 5% 1/10W
C671 1-126-933-11 ELECT 100uF 20% 16V R304 1-216-809-11 METAL CHIP 100 5% 1/10W
C673 1-126-925-91 ELECT 470uF 20% 10V R305 1-216-809-11 METAL CHIP 100 5% 1/10W
C675 1-126-960-11 ELECT 1uF 20% 50V
C676 1-126-960-11 ELECT 1uF 20% 50V R306 1-216-809-11 METAL CHIP 100 5% 1/10W
R307 1-216-809-11 METAL CHIP 100 5% 1/10W
C703 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V R308 1-216-809-11 METAL CHIP 100 5% 1/10W
C704 1-162-962-11 CERAMIC CHIP 470PF 10% 50V R309 1-216-809-11 METAL CHIP 100 5% 1/10W
R310 1-216-809-11 METAL CHIP 100 5% 1/10W
< CONNECTOR >
R311 1-216-809-11 METAL CHIP 100 5% 1/10W
CN301 1-784-747-11 CONNECTOR, FFC 25P R312 1-216-809-11 METAL CHIP 100 5% 1/10W
CN302 1-784-727-11 CONNECTOR, FFC 5P (EC79i: UK, AUS/EC99i) R313 1-216-809-11 METAL CHIP 100 5% 1/10W
CN303 1-824-027-21 HOLDER, CABLE 3P R314 1-216-809-11 METAL CHIP 100 5% 1/10W
CN608 1-779-289-11 CONNECTOR, FFC (LIF (NON-ZIF)) 21P R315 1-216-809-11 METAL CHIP 100 5% 1/10W

< DIODE > R317 1-216-809-11 METAL CHIP 100 5% 1/10W

R318 1-216-809-11 METAL CHIP 100 5% 1/10W
D301 6-501-722-01 DIODE MAZ8043GMLS0 R319 1-216-809-11 METAL CHIP 100 5% 1/10W
D302 6-501-817-01 DIODE MA2J1110GLS0 R320 1-216-809-11 METAL CHIP 100 5% 1/10W
D303 6-500-334-01 DIODE MC2836-T112-1 R321 1-216-809-11 METAL CHIP 100 5% 1/10W
D304 6-501-817-01 DIODE MA2J1110GLS0
D305 6-501-479-01 LED 1L0341Y23E0CA602 (STANDBY) R322 1-216-809-11 METAL CHIP 100 5% 1/10W
(EC69i/EC79i: US, CND) R323 1-216-809-11 METAL CHIP 100 5% 1/10W
R324 1-216-809-11 METAL CHIP 100 5% 1/10W
D305 6-502-773-01 LED SELG2WA10C LF62 (STANDBY) R325 1-216-797-11 METAL CHIP 10 5% 1/10W
(EC79i: UK, AUS/EC99i) R326 1-216-809-11 METAL CHIP 100 5% 1/10W
D306 6-501-582-01 DIODE 1N4002-A2 (EC79i: UK, AUS/EC99i)
D307 6-501-817-01 DIODE MA2J1110GLS0 (EC79i: UK, AUS/EC99i) R327 1-216-809-11 METAL CHIP 100 5% 1/10W
D618 6-501-719-01 DIODE MAZ8039GHLS0 R328 1-216-833-11 METAL CHIP 10K 5% 1/10W
D619 6-501-582-01 DIODE 1N4002-A2 R329 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R330 1-216-819-11 METAL CHIP 680 5% 1/10W
D620 6-501-582-01 DIODE 1N4002-A2 R331 1-216-845-11 METAL CHIP 100K 5% 1/10W

R332 1-216-833-11 METAL CHIP 10K 5% 1/10W

R333 1-216-845-11 METAL CHIP 100K 5% 1/10W
R334 1-216-827-11 METAL CHIP 3.3K 5% 1/10W
R335 1-216-837-11 METAL CHIP 22K 5% 1/10W

65
HCD-EC69i/EC79i/EC99i
Ver. 1.1
PANEL PT-SINGLE

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R336 1-216-833-11 METAL CHIP 10K 5% 1/10W R446 1-216-846-11 METAL CHIP 120K 5% 1/10W
(EC79i: UK, AUS/EC99i)
R337 1-216-813-11 METAL CHIP 220 5% 1/10W R447 1-216-835-11 METAL CHIP 15K 5% 1/10W
R362 1-216-837-11 METAL CHIP 22K 5% 1/10W (EC79i: UK, AUS/EC99i)
R363 1-216-837-11 METAL CHIP 22K 5% 1/10W R448 1-216-833-11 METAL CHIP 10K 5% 1/10W
R369 1-216-821-11 METAL CHIP 1K 5% 1/10W R449 1-216-805-11 METAL CHIP 47 5% 1/10W
R370 1-216-821-11 METAL CHIP 1K 5% 1/10W
R450 1-216-822-11 METAL CHIP 1.2K 5% 1/10W
R376 1-216-833-11 METAL CHIP 10K 5% 1/10W R452 1-216-839-11 METAL CHIP 33K 5% 1/10W
R377 1-216-833-11 METAL CHIP 10K 5% 1/10W R716 1-216-821-11 METAL CHIP 1K 5% 1/10W
R378 1-216-839-11 METAL CHIP 33K 5% 1/10W R717 1-249-403-11 CARBON 68 5% 1/4W
R379 1-216-843-11 METAL CHIP 68K 5% 1/10W R718 1-249-403-11 CARBON 68 5% 1/4W
R380 1-216-817-11 METAL CHIP 470 5% 1/10W
R719 1-249-403-11 CARBON 68 5% 1/4W
R381 1-216-833-11 METAL CHIP 10K 5% 1/10W R720 1-216-837-11 METAL CHIP 22K 5% 1/10W
R382 1-216-833-11 METAL CHIP 10K 5% 1/10W R722 1-216-809-11 METAL CHIP 100 5% 1/10W
R383 1-216-833-11 METAL CHIP 10K 5% 1/10W
R384 1-216-833-11 METAL CHIP 10K 5% 1/10W < ROTARY ENCODER >
R385 1-216-821-11 METAL CHIP 1K 5% 1/10W
S301 1-786-417-11 ENCODER, ROTARY (VOLUME)
R386 1-216-821-11 METAL CHIP 1K 5% 1/10W
R387 1-216-821-11 METAL CHIP 1K 5% 1/10W < SWITCH >
R389 1-216-821-11 METAL CHIP 1K 5% 1/10W
(EC69i/EC79i: UK, AUS) SW301 1-771-410-21 SWITCH, TACTILE (I/1) (EC79i: UK, AUS/EC99i)
R389 1-216-825-11 METAL CHIP 2.2K 5% 1/10W SW302 1-771-410-21 SWITCH, TACTILE (DISPLAY)
(EC99i) (EC79i: UK, AUS/EC99i)
R389 1-216-828-11 METAL CHIP 3.9K 5% 1/10W SW303 1-771-410-21 SWITCH, TACTILE (I/1) (EC69i/EC79i: US, CND)
(EC79i: US, CND) SW313 1-771-410-21 SWITCH, TACTILE (– TUNING, l m)
SW314 1-771-410-21 SWITCH, TACTILE (u)
R390 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC79i/EC99i) SW315 1-771-410-21 SWITCH, TACTILE (FOLDER –)
R391 1-216-821-11 METAL CHIP 1K 5% 1/10W SW316 1-771-410-21 SWITCH, TACTILE (FUNCTION)
(EC69i: UK/EC79i: UK/EC99i: UK) (EC69i/EC79i: US, CND)
R391 1-216-825-11 METAL CHIP 2.2K 5% 1/10W SW316 1-771-410-21 SWITCH, TACTILE (EQ) (EC79i: UK, AUS/EC99i)
(EC69i: AUS/EC79i: AUS/EC99i: AUS) SW317 1-771-410-21 SWITCH, TACTILE (FUNCTION)
R392 1-216-833-11 METAL CHIP 10K 5% 1/10W (EC79i: UK, AUS/EC99i)
(EC69i: US, CND, AUS/EC79i: US, CND, AUS/ SW318 1-771-410-21 SWITCH, TACTILE (SUBWOOFER ON/OFF)
EC99i: US, CND, AUS) (EC99i)
R396 1-216-851-11 METAL CHIP 330K 5% 1/10W
< VIBRATOR >
R400 1-216-821-11 METAL CHIP 1K 5% 1/10W
R401 1-216-821-11 METAL CHIP 1K 5% 1/10W X301 1-814-067-11 OSCILLATOR, CRYSTAL (32.768kHz)
R402 1-216-845-11 METAL CHIP 100K 5% 1/10W X302 1-813-548-31 VIBRATOR, CERAMIC (6MHz)
R412 1-216-822-11 METAL CHIP 1.2K 5% 1/10W ************************************************************
R413 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
PT-SINGLE BOARD
R414 1-216-825-11 METAL CHIP 2.2K 5% 1/10W ***************
R415 1-216-826-11 METAL CHIP 2.7K 5% 1/10W
R416 1-216-828-11 METAL CHIP 3.9K 5% 1/10W < CAPACITOR >
R417 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W
(EC79i: UK, AUS/EC99i) C001 1-165-621-91 CERAMIC CHIP 0.1uF 50V
R418 1-216-835-11 METAL CHIP 15K 5% 1/10W
(EC99i) < CONNECTOR >

R419 1-216-838-11 METAL CHIP 27K 5% 1/10W CN002 1-820-973-11 HOLDER, CABLE 10P (EC99i)
R420 1-216-845-11 METAL CHIP 100K 5% 1/10W CN003 1-819-972-11 HOLDER, CABLE 8P (EC69i/EC79i)
R421 1-216-833-11 METAL CHIP 10K 5% 1/10W * CN004 1-568-226-11 PIN, CONNECTOR (3.96mm PITCH) 2P
R422 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R433 1-216-809-11 METAL CHIP 100 5% 1/10W < DIODE >

R434 1-216-809-11 METAL CHIP 100 5% 1/10W D001 6-500-334-01 DIODE MC2836-T112-1
R441 1-216-833-11 METAL CHIP 10K 5% 1/10W D002 6-500-335-01 DIODE MC2838-T112-1
(EC79i: UK, AUS/EC99i) D003 6-500-335-01 DIODE MC2838-T112-1
R442 1-216-837-11 METAL CHIP 22K 5% 1/10W
(EC79i: UK, AUS/EC99i) < TRANSFORMER >
R443 1-216-833-11 METAL CHIP 10K 5% 1/10W
(EC79i: UK, AUS/EC99i) 0 PT001 1-445-563-11 TRANSFORMER, POWER (EC69i: US, CND/
R444 1-216-829-11 METAL CHIP 4.7K 5% 1/10W EC79i: US, CND/EC99i: US, CND)
(EC79i: UK, AUS/EC99i) 0 PT002 1-443-912-11 TRANSFORMER, POWER
(EC69i: UK/EC79i: UK/EC99i: UK)
R445 1-216-829-11 METAL CHIP 4.7K 5% 1/10W 0 PT003 1-445-105-11 TRANSFORMER, POWER (EC69i: AUS/EC79i:
(EC79i: UK, AUS/EC99i) AUS/EC99i: AUS)

66
 HCD-EC69i/EC79i/EC99i
Ver. 1.1
PT-SINGLE REG

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
0 PT005 1-445-569-11TRANSFORMER, POWER
< RELAY > (EC79i: AUS/EC99i: AUS)
S201 1-771-853-11 SWITCH, DETECTION (LIMIT)
0 RY001 1-755-334-11 RELAY, AC POWER SW750 1-692-960-11 SWITCH, PUSH (1 KEY) (CD LID OPEN/
************************************************************ CLOSE DETECT) (EC69i/EC79i: US, CND)
*************************************************************
REG BOARD
********** ACCESSORY
**********
< CAPACITOR >
0 1-770-019-71 ADAPTOR, CONVERSION PLUG 3P (UK)
C698 1-100-566-91 CERAMIC CHIP 0.1uF 10% 25V

< IC >

IC601 6-713-032-01 IC KIA7809API-U/PF

< CABLE HOLDER >

W610 1-824-027-21 HOLDER, CABLE 3P

*************************************************************

MISCELLANEOUS
**************

102 1-452-899-11 MAGNET (EC69i/EC79i: US, CND)

0 113 8-820-126-02 OPTICAL PICK-UP BLOCK (KSM-213CDP/C2NP)
(EC69i/EC79i: US, CND)
114 1-834-268-21 WIRE (FLAT TYPE) (16 CORE)
(EC69i/EC79i: US, CND)
154 1-836-761-21 CABLE, FLEXIBLE FLAT (5 CORE)
(EC79i: UK, AUS/EC99i)
155 A-1579-622-A CDM76A ASSY (EC79i: UK, AUS/EC99i)

0 157 A-4735-357-A BASE ASSY, OP (KSM-213D)

(EC79i: UK, AUS/EC99i)
161 1-832-404-21 CABLE, FLEXIBLE FLAT (16 CORE)
(EC79i: UK, AUS/EC99i)
204 1-832-804-21 CABLE, FLEXIBLE FLAT (7 CORE) (EC69i)
204 1-832-815-21 CABLE, FLEXIBLE FLAT (9 CORE) (EC79i/EC99i)
208 1-836-760-21 CABLE, FLEXIBLE FLAT (21 CORE)
(EC69i/EC79i: US, CND)

208 1-836-762-21 CABLE, FLEXIBLE FLAT (21 CORE)

(EC79i: UK, AUS/EC99i)
209 1-832-896-21 CABLE, FLEXIBLE FLAT (25 CORE) (EC69i)
209 1-832-897-21 CABLE, FLEXIBLE FLAT (25 CORE) (EC79i/EC99i)
256 1-836-763-21 CABLE, FLEXIBLE FLAT (11 CORE) (EC79i/EC99i)
256 1-836-766-21 CABLE, FLEXIBLE FLAT (11 CORE) (EC69i)

0 304 1-834-965-22 CORD, POWER (US, CND)

0 304 1-834-966-41 POWER-SUPPLY CORD (UK)
0 304 1-834-967-21 CORD, POWER (AUS)
306 1-831-744-21 CABLE, FLEXIBLE FLAT (5 CORE) (EC69i)
0 353 1-834-965-22 CORD, POWER (US, CND)

0 353 1-834-966-41 POWER-SUPPLY CORD (UK)

0 353 1-834-967-21 CORD, POWER (AUS)
401 1-832-806-21 CABLE, FLEXIBLE FLAT (7 CORE) (EC99i)
403 1-831-744-21 CABLE, FLEXIBLE FLAT (5 CORE) (EC99i)
406 1-832-795-21 CABLE, FLEXIBLE FLAT (5 CORE) (EC79i)

M601 1-787-319-12 FAN, DC (EC69i)

M601 1-787-344-11 FAN, DC (EC79i/EC99i)
0 PT004 1-445-562-11 TRANSFORMER, POWER (EC69i: UK)
0 PT004 1-445-564-11 TRANSFORMER, POWER (EC69i: US, CND)
0 PT004 1-445-574-11 TRANSFORMER, POWER (EC69i: AUS)

0 PT005 1-445-565-11 TRANSFORMER, POWER

(EC79i: US, CND/EC99i: US, CND)
0 PT005 1-445-566-11 TRANSFORMER, POWER (EC79i: UK/EC99i: UK)

67
HCD-EC69i/EC79i/EC99i

REVISION HISTORY

Checking the version allows you to jump to the revised page.

Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver. Date Description of Revision
1.0 2009.02 New
1.1 2009.05 Addition of UK model (HCD-EC99i) (SMR-09015)