Scribd
Upload
226 views

Scan Conversion

Scan conversion is the process of representing graphics objects as a collection of pixels on a display device. Graphics objects are continuous, while pixels are discrete units that can be on or off. Algorithms are used to generate graphics objects like points, lines, polygons, and characters by setting pixels in the frame buffer which stores the image as a pattern of binary digits. The closer the pixels, the higher quality the image, as it will not appear jagged. Each pixel has an address and can be assigned color or intensity values to generate different graphics objects.

Uploaded by

Nirmal Deep Kaur
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
226 views

Scan Conversion

Scan conversion is the process of representing graphics objects as a collection of pixels on a display device. Graphics objects are continuous, while pixels are discrete units that can be on or off. Algorithms are used to generate graphics objects like points, lines, polygons, and characters by setting pixels in the frame buffer which stores the image as a pattern of binary digits. The closer the pixels, the higher quality the image, as it will not appear jagged. Each pixel has an address and can be assigned color or intensity values to generate different graphics objects.

Uploaded by

Nirmal Deep Kaur
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Scan Conversion Definition

It is a process of representing graphics objects as a collection of pixels. The graphics objects


are continuous. The pixels used are discrete. Each pixel can have either on or off state.

The circuitry of the video display device of the computer is capable of converting binary values
(0, 1) into a pixel on and pixel off information. 0 is represented by pixel off. 1 is represented
using pixel on. Using this ability graphics computer represent picture having discrete dots.

Any model of graphics can be reproduced with a dense matrix of dots or points. Most human
beings think graphics objects as points, lines, circles, ellipses. For generating graphical object,
many algorithms have been developed.

Advantage of developing algorithms for scan conversion

1. Algorithms can generate graphics objects at a faster rate.


2. Using algorithms memory can be used efficiently.
3. Algorithms can develop a higher level of graphical objects.

Examples of objects which can be scan converted

1. Point
2. Line
3. Sector
4. Arc
5. Ellipse
6. Rectangle
7. Polygon
8. Characters
9. Filled Regions

The process of converting is also called as rasterization. The algorithms implementation varies
from one computer system to another computer system. Some algorithms are implemented
using the software. Some are performed using hardware or firmware. Some are performed
using various combinations of hardware, firmware, and software.
Pixel or Pel
The term pixel is a short form of the picture element. It is also called a point or dot. It is the
smallest picture unit accepted by display devices. A picture is constructed from hundreds of
such pixels. Pixels are generated using commands. Lines, circle, arcs, characters; curves are
drawn with closely spaced pixels. To display the digit or letter matrix of pixels is used.

The closer the dots or pixels are, the better will be the quality of picture. Closer the dots are,
crisper will be the picture. Picture will not appear jagged and unclear if pixels are closely
spaced. So the quality of the picture is directly proportional to the density of pixels on the
screen.

Pixels are also defined as the smallest addressable unit or element of the screen. Each pixel can
be assigned an address as shown in fig:

Different graphics objects can be generated by setting the different intensity of pixels and
different colors of pixels. Each pixel has some co-ordinate value. The coordinate is represented
using row and column.

P (5, 5) used to represent a pixel in the 5th row and the 5th column. Each pixel has some
intensity value which is represented in memory of computer called a frame buffer. Frame
Buffer is also called a refresh buffer. This memory is a storage area for storing pixels values
using which pictures are displayed. It is also called as digital memory. Inside the buffer, image
is stored as a pattern of binary digits either 0 or 1. So there is an array of 0 or 1 used to represent
the picture. In black and white monitors, black pixels are represented using 1's and white pixels
are represented using 0's. In case of systems having one bit per pixel frame buffer is called a
bitmap. In systems with multiple bits per pixel it is called a pixmap.
Scan Converting a Point
Each pixel on the graphics display does not represent a mathematical point. Instead, it means a
region which theoretically can contain an infinite number of points. Scan-Converting a point
involves illuminating the pixel that contains the point.

Example: Display coordinates points as shown in fig would both be


represented by pixel (2, 1). In general, a point p (x, y) is represented by the integer part of x &
the integer part of y that is pixels [(INT (x), INT (y)].
Scan Converting a Straight Line
A straight line may be defined by two endpoints & an equation. In fig the two endpoints are
described by (x1, y1) and (x2, y2). The equation of the line is used to determine the x, y
coordinates of all the points that lie between these two endpoints.

Using the equation of a straight line, y = mx + b where m = & b = the y interrupt, we can
find values of y by incrementing x from x =x1, to x = x2. By scan-converting these calculated
x, y values, we represent the line as a sequence of pixels.

You might also like