ASSESSMENT COVER SHEET /

LEMBARAN HADAPAN PENILAIAN KURSUS

DEPARTMENT/JABATAN: JABATAN KEJURUTERAAN

MEKANIKAL

PROGRAM: DIPLOMA KEJURUTERAAN MEKATRONIK

SESSION/SESI: 1 2022 / 2022

COURSE NAME/NAMA KURSUS: COMMUNICATIVE ENGLISH 2

COURSE CODE/KOD KURSUS: DUE30022

LECTURER’S NAME/ : MS SHAMMINE

NAMA PENSYARAH

TYPE OF ASSESSMENT/ : POSTER

JENIS PENILAIAN

TITLE/TAJUK : PROCESS AND PROCEDURE

SUBMISSION DATE/ : 18 OCTOBER 2022

TARIKH HANTAR

RECEIVED DATE (fill in by lecturer) :

TARIKH TERIMA (diisi oleh pensyarah)

STUDENT’S NAME/NAMA PELAJAR MATRIC NUMBER/NOMBOR CLASS/KELAS

MATRIK
VAERSHHAVAELL MURUGAYAH 23DEM21F1057 DEM 3B
IRFAN AKMAL BIN MOHD ISA 23DEM21F1028 DEM 3B

MARKS/MARKAH:
CL01 CLO2 CLO3 CLO4 TOTAL MARKS/
JUMLAH MARKAH

LECTURER’S COMMENT:
 Audemars Piquet Flying Tourbillon Concept Black Panther ⌚️

The product of our group is the Audemars Piquet

Flying Tourbillon Concept Black Panther. This is one of the
most sought after timepieces in the Audemars Piquet
Catalogue. Audemars Piguet pays tribute to a new generation
of influential Marvel heroes with a limited edition of 250 pieces
dedicated to the Black Panther's universe. Rooted in ancestral
craftsmanship, design experimentation and futuristic
technology, this Royal Oak Concept pulsates with enhanced
power. Inspired by the Black Panther's cutting-edge suit, the
sandblasted titanium case presents a textured look with satin-
brushed and polished titanium inserts. The satin-brushed and
polished black ceramic bezel furthers the watch's high-tech
design. It will cost you a pretty penny to acquire this limited
edition and rare timepiece.
The Material used on the product ⌚️

First, the faceted Royal Oak Concept case now comes in a new intermediate 42mm size
versus 44mm and 38.5mm for the models currently in the collection. It will thus sit more easily on
most wrists, compared to the current gent’s size. Secondly, its design has been modernized with a
new profile and a curved sapphire crystal, framed by an equally curved bezel, the curve goes from
12 to 6 o’clock. The perception of the angular case design and sculpted volume is also significantly
changed by the addition of satin-brushed titanium inserts reminiscent of air intakes. Made of
lightweight sandblasted and brushed titanium, this 42mm Royal Oak Concept Black Panther is
topped by a brushed and glossy black ceramic octagonal bezel, with the classic hexagonal
screws. The crown is also executed in ceramic, for a high-tech look. Overall, the case feels more
compact, and even more dynamic and technical than before. And as for any Royal Oak, the case
finishing is outstanding with alternating satin-brushed, sandblasted and polished surfaces. Flip the
Royal Oak Concept Black Panther over and the exhibition caseback, secured by 8 screws, offers
an unimpeded view of the hand-wound Calibre 2965. Originally presented in 2018 in this Rank One
Computing (ROC) watch, the flying tourbillon movement runs at 3Hz and is in full display at 6 o’clock.
The movement can store 72-hours of power reserve when fully wound. It is worn on an integrated
purple rubber strap fitted with a titanium folding clasp. The watch comes with a spare black
rubber strap.

1|Page
 Processes and Procedures ⌚️

Firstly, every single micro The watchmaker has to clean

equipment which is needed in every single equipment in
the making of the watch is distilled water so that there will
categorized in the form of be a light shine in the pieces.
gears, screws, balance wheels,
barrel, calibre, crown, hour and
minute hands.

After that, it is time to make the case while giving the Next, making of the bezel of the
bezel its unique vertical satin-brushed finish. An Audemars Piquet Royal Oak
operation which is performed by hand against a Concept Black Panther. The
diamond paper with very fine grit. The time to make watchmaker cuts the Black
the case is when the holes of the bezel is drilled at 8 ceramic case to the ironic
spaces in round shapes to the exact diameter of the octagon shape of all the
screws. It is the polished by hand. watches in their catalogue.

Next, moving onto the dial, the main focus on the dial is the Black Panther figure
so let’s start with the figure. First, we have gather all the equipment which is
needed. The items needed are titanium block, white paint, black paint, scrapper,
brush and a needle. First, the titanium block is washed with distilled water and left
to dry. Then, the watchmakers has to take on approtimately 72 to 108 hours just
to scrape away the unwanted titanium from the block so it can get the outline of
the Black Panther figure.

After, getting the perfect outline of the black panther.

Then, the white gold hour hand Here is where the brush comes in by brushing away
and minute hand is placed all the unwanted ashes of titanium on the figure.
below the black panther figure. Subsequently, the watchmaker has to point the black
Next, once the dial is done it is panther figure with the black and white paint at the
covered by a sapphire glass of desired parts. As soon as the paint has dried on the
the highest quality on top of it to black panther it is placed on the face of the watch.
prevent any damages

After that, an elastic strap is made from

rubber but the clasp is made from titanium
is cut into the perfect size that is needed to
make the clasp. Then, the titanium is
lasered the AP logo as it is and Audemars
Piquet watch. Lastly, the strap is attached
to the watch.
2|Page
 Impact/Benefit of the product ⌚️

Investment on timepiece can goes up really well in value as time goes on because since
the Audemars Piguet Royal Oak Concept Black Panther Flying Tourbillon with reference
26620IO.OO.D077CA.01 was released in a limited edition of 250 pieces are sold out. The product
also can slightly catch the attention because of it’s rarity. As in, when a stranger notices, it would be
automatically start the conversation and hash out about it and ask more about the product.

Precaution ❗️

There are atleast 3 things to be focus and be caution while making the product. Include,
the slightest miss accuracy can miss the whole watch so the watchmake should be 100% focused.
Thus, the watchmaker should use gloves while scraping the titanium because the scraper could
easily cut your finger. Last but not least, the watchmaker should handle every part of the watch
with caution as there are a lot of fragile objects that can easily break and expensive parts that are
quite difficult to replace.

3|Page