UMM WU’AL PHOSPHATE PROJECT
Phosphoric Acid Plant
PO No.: MD-512-3000-
Rev. Date : 13-Apr-2015
CP-EL-MPO-5017 OIL DATA SHEET
Doc. No.: MD-512-3000- For 120/145MVA TRANSFORMER
Rev. No.: C01
EG-EL-DAS-5017-0003
OIL DATA SHEET
For 120/145MVA TRANSFORMER
MD-512-3000-EG-EL-DAS-5017-0003
S.Y.Kang S.Y.Kang 15-April, 2015
no comment
Rev. Rev. Date Description of Prepared By Checked By Approved By Approved By
No. Revision (HENC)
C01 13-Apr-15 Issue for Approval K. H. Park J. Y. Lee T. H. Kim
A01 13-Feb-15 Issue for Approval K. H. Park J. Y. Lee T. H. Kim
OIL DATA SHEET
For 120/145MVA TRANSFORMER Page 1 of 2
Doc. No.: MD-512-3000-EG-EL-DAS-5017-0003
UMM WU’AL PHOSPHATE PROJECT
Phosphoric Acid Plant
PO No.: MD-512-3000-
Rev. Date : 13-Apr-2015
CP-EL-MPO-5017 OIL DATA SHEET
Doc. No.: MD-512-3000- For 120/145MVA TRANSFORMER
Rev. No.: C01
EG-EL-DAS-5017-0003
REVISION INDEX
Rev Date Description
A01 13-Feb-2015 Issue for Approval
C01 13-Apr-2015 Issue for Approval
OIL DATA SHEET
For 120/145MVA TRANSFORMER Page 2 of 2
Doc. No.: MD-512-3000-EG-EL-DAS-5017-0003
BULLETIN
Petromin Hyvolt I 60296
Application
Description
Petromin Hyvolt I 60296 transformer oil is an un-inhibited Petromin Hyvolt I 60296 transformer conform to IEC 60296
highly-refined naphthenic oil specifically manufactured for Edition 4 of 2012 as well as former B.S. 148/1984 and IEC
use in electric transformers and switchgears as an insulating Specification 296 (82) and is also used as an insulating and
and heat transfer medium. cooling medium where oil of high thermal and oxidation
stability is required. It is also suitable where good gas
Benefits absorbing properties are necessary like transformer oil
Good oxidation stability. immersed switchgear, circuit breakers etc. Transformer Oil
meets class I and class II of BS 148 and IEC 296
High dielectric strength. specification.
Very low pour point.
Free from acids and corrosive sulphur. Performance Level
Compatible with transformer construction material. IEC 60296 (Edition 4 of 2012)
Class II/I
BS 148 (1984)
Product Characteristics*
TEST DESCRIPTION SPECIFICATIONS TYPICAL VALUES TEST METHOD
Property Min Max
Density @ 20 ºC 0.895 0.881 ISO 12185
2
Viscosity @ 40ºC mm /s 12.0 10.3 ISO 3104
Viscosity @ 100ºC mm2/s 1800 1291 ISO 3104
Pour Point ºC -40 -62 ISO 3016
Water Content, mg/kg 30 15 IEC60814
BDV, kV, Before treatment 30 55 IEC 60156
BDV, kV, After treatment 70 75 IEC 60156
DDF at 90 ºC 0.005 0.001 IEC 60247
Refining/Stability
Appearance PASS PASS ERTM-2
Acidity 0.01 < 0.01 IEC62021-1
Interfacial Tension, mN/m 40 53 ASTM D 971
Corrosive Sulfur Non Corrosive Non Corrosive DIN 51353
Corrosive Sulfur Non Corrosive Non Corrosive ASTM 1275, B
Corrosive Sulfur Non Corrosive Non Corrosive IEC 62535
DBDS Not detected (<5mg/kg ) Not detected IEC62697-1
Inhibitors of IEC 60666 Not detected (<0.01 % ) Not detected IEC 60666
Metal Passivator Additives Not detected (<0.05mg/kg) Not detected IEC 60666
Other Additives See 1
Furfural Content, mg/Kg 0.05 <0.05 IEC 61198
Carbon Type Analysis, % IR-Brandes
*The information and figures given here are typical of current production and conform to specification, minor variations may occur.
Petromin Corporation
P. O. Box 1432, Jeddah 21431, Saudi Arabia. Tel. (966-2) 215 7000
Fax: (966-2) 215 7111. www.Petromin.com
BULLETIN
TEST DESCRIPTION SPECIFICATIONS TYPICAL VALUES TEST METHOD
Property Min Max
CA 12
CN 42
CP 46
Performance
Oxidation stability at 120 ºC IEC 61125, C
Total Acidity, mg KOH/g 1.2 0.7
Sludge, % 0.8 0.2
DDF at 90 ºC 0.05 0.044
Health, Safety and
Environment
Flash point, PMCC, ºC 135 147 ISO 2719
PCA Content, % 3 <3 BS2000 part346
PCB Content Not detected Not detected IEC 61619
*The information and figures given here are typical of current production and conform to specification, minor variations may occur.
Petromin Corporation
P. O. Box 1432, Jeddah 21431, Saudi Arabia. Tel. (966-2) 215 7000
Fax: (966-2) 215 7111. www.Petromin.com
