ZXSDR OMMB

Dynamic Data Management Operation Guide

Version: V12.13.30

ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: [email protected]
LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

Revision No. Revision Date Revision Reason

R1.0 2013–08–30 First Edition

Serial Number: SJ-20130704144811-007

Publishing Date: 2013-08-30 (R1.0)

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Contents
About This Manual ......................................................................................... I
Chapter 1 Dynamic Management Overview ............................................. 1-1
Chapter 2 Executing Dynamic Management Commands ....................... 2-1
Chapter 3 Dynamic Management Commands ......................................... 3-1
Glossary .......................................................................................................... I

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 II

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 About This Manual
Purpose
This manual describes the dynamic management functions and operations of the
Multimode BS OMM.

Intended Audience
This manual is intended for:
l Commissioning engineer
l Network operation supervisors
l Maintenance engineers

Prerequisite Skills and Knowledge

Familiarity with the following is required:
l The composition, functions, and working principles of the ZXSDR BSs.
l Composition and common operations of the Multimode BS OMM

What Is in This Manual

This manual contains the following chapters:

Chapter Summary

1, Dynamic Management Introduces the dynamic management main window and describes the
Overview dynamic management functions.

2, Executing Dynamic Describes how to execute dynamic management commands.

Management Commands

3, Dynamic Management Describes the functions that are provided by the dynamic management
Commands commands.

Conventions
This manual uses the following typographical conventions:

Typeface Meaning

[] Optional parameters.

{} Mandatory parameters.

| Separates individual parameter in series of parameters.

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Typeface Meaning

Danger: indicates that a severe accident such as casualties and

equipment damage may occur if you ignore this safety warning.

Warning: indicates that a major accident such as casualties and

equipment damage may occur if you ignore this safety warning.

Caution: indicates that equipment damage, data loss, degradation

of equipment performance, or other unpredictable results may occur
if you ignore this safety warning.

Tips: Indicates a suggestion or hint to make things easier or more

productive.

II

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Chapter 1
Dynamic Management
Overview
Function Overview
The dynamic management module provides you with the man-machine commands
running on the Operation and Maintenance Module for BTS, NodeB and eNodeB (EMS)
and Base Stations (BSs). You can achieve the purpose of resource management by
executing dynamic commands on the specified resource objects.

Main Window Overview

Figure 1-1 shows the dynamic management main window.

Figure 1-1 Dynamic Management Main Window

1-1

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

ZXSDR OMMB Dynamic Data Management Operation Guide

This page intentionally left blank.

1-2

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Chapter 2
Executing Dynamic
Management Commands
This procedure describes how to execute dynamic management commands.

Prerequisite
The resource objects of the NEs have been configured through configuration management.

Steps
1. On the EMS client, right-click an OMMB agent NE in the NE tree, and select NE
Management > Start NE Management from the shortcut menu. The NE management
function is enabled.

Note:
After the NE management function is enabled, the icon is displayed on the NE node.

2. In the NE tree, right-click the agent NE node again, and select NE Management >
Dynamic Management from the shortcut menu. The Dynamic Management tab is
displayed.
3. Select an NE under the Subnetwork node, see Figure 2-1.

Figure 2-1 Selecting an NE

2-1

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

ZXSDR OMMB Dynamic Data Management Operation Guide

4. Double-click a dynamic command in the Dynamic Command navigation tree. The

related information is displayed on the right pane, see Figure 2-2.

Figure 2-2 Selecting a Dynamic Command

5. Select the resource to be managed on the right pane.

l All resources in the list are selected by default.
l Click to select all.
l Click to clear all.
6. Click to run the dynamic management commands. The results are displayed in the
Detailed Information of Operation pane at the bottom.

– End of Steps –

2-2

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Chapter 3
Dynamic Management
Commands
For the dynamic commands of common resources, refer to Table 3-1.

Table 3-1 Dynamic Management Commands

Resource Type Command Name Command Description

Managed Set Initial Certificate Downloads the initial certificate that is related to the
Network Element CA server from the EMS to the BS.

Query Device Queries the device manufacturer certificate.

Manufacturer Certificate

Query Operator Queries the information about the CA certificate on

Certificate the BS. The information includes topic, serial number,
the start and end dates of the validity period, issuer,
and signature algorithm.

Delete Certificate Deletes the CA certificate from the BS.

Update Certificate Updates the certificate on the BS from the CA server.

Query System User Queries the current user list of the BS, including user
Information names and user levels.

Update System User Provides unified management of system users,

Information including adding users, deleting users, and modifying
user passwords.

Query OMM Access Log Queries the log information that records the operations
of the EMS/LMT connecting to the BS and exiting
the BS. The information includes user name, user
level, operation type, IP address, IP port number, and
operation time.

Clean LMT Modification Clears the LMT data modification flag from the BS.
State

Query NE Connection Queries the information about the EMS or LMT that
are connected to the BS. The information includes
user name, user level, terminal type, IP address, IP
port number, and login time.

Disconnect LMT Shuts down the connection between the specified

LMT and the BS.

3-1

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

ZXSDR OMMB Dynamic Data Management Operation Guide

Resource Type Command Name Command Description

Set LMT Authorization Records LMT authorization information, generates

a new authorization file, and replaces the current
authorization file with the new authorization file.

Query LMT Author File Queries the contents in the LMT authorization file,
including user names and user levels.

Open LMT Author Flag Enables the LMT access authentication function. The
users that log in through an LMT are authenticated
based on the records that are contained in the LMT
authorization file.

Close LMT Author Flag Disables the LMT access authentication function.

Query LMT Author Flag Query whether authentication is required for access
of the current LMT.

Set NE Time Sets the system time of the BS.

Query NE Time Queries the system time of the BS.

Query Resource Status Queries resource status of the NE system.

Collect Site Alarms Collects on-site alarm information of all boards.

Information of All Boards

Collect Site Alarms Collects on-site alarm information of all BBUs.

Information of All BBUs

Collect Site Alarms Collects on-site alarm information of all RRUs.

Information of RRUs

Synchronization NE Requests the BS to obtain the system time of the

Time SNTP server through the SNTP protocol, and sets the
time as the system time of the BS.

Query Link State Queries whether the status of the link between the
EMS and the BS is the manual link break state.

Manual Link Break Disconnects the link between the EMS and BS.

Manual Link Restore Restores the link break which is caused by manual
link break, between the EMS and BS.

Query NE Status Queries whether the BS is blocked, and whether flash

memory is writable.

Reset NE Resets the BS.

Unblock NE The EMS sends the command of blocking all the cells
in the BS to the BS.

Unblock System The EMS sends the command of unblocking all the
cells in the BS to the BS.

3-2

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Chapter 3 Dynamic Management Commands

Resource Type Command Name Command Description

Reset Radio Mode Resets a mode on the BS without affecting the other
modes.

Reset Product Thread Resets the thread(s) of a mode without affecting the
other modes.

Reset RGPS Resets the external panel receiver of the RGPS, or

resets the external backplane receiver of the RGPS.

Allow Write Flash The warning information collected from the BS is

allowed to write into to a flash memory.

Not Allow Write Flash The warning information collected from the BS is not
allowed to write into to a flash memory.

E1 Query E1 Link Queries an E1 link.

Block E1 Link Blocks an E1 link.

Unblock E1 Link Unblocks an E1 link.

Device Group PA On Starts the power amplifier of the specified RRU.

PA Off Stops the power amplifier of the specified RRU.

Query Carrier Power Queries the power of the carrier in a channel of the
RRU.

Upload RRU Logs Uploads RRU logs.

RF Calibrate Set RF indices and parameters.

Block RRU Channel Blocks an RRU channel (2.0).

(2.0)

Unblock RRU (2.0) Unblocks an RRU channel (2.0).

Query Board Queries the operation of the specified board.

Reset Board Resets the specified board.

Board Hardware Reset Hard resets the specified RRU board.

Block Board Blocks the specified BPL board.

Unblock Board Unblocks the specified BPL board.

Board Master to Slave Performs the active/standby switchover on the

specified boards (CC, PM, and CCC).

Board Power On Powers on the specified board (BPL).

Query Board Power Query the power supply of the board.

Supply

Board Power Off Powers off the specified board (BPL).

Board Power Off Reset Powers off and resets the specified board.

3-3

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

ZXSDR OMMB Dynamic Data Management Operation Guide

Resource Type Command Name Command Description

Reset Smoke Sensor Resets the smoke sensor.

Query Board Mode Queries the board mode.

Reset Board Radio Resets the radio of a board.

Block Board Radio Blocks the radio of a board.

Unblock Board Radio Unblocks the radio of a board.

Disk File Clean Cleans the disk space of the specified main control
board.

Disk File Clean Cleans the disk space of the specified main control
board.

Collect Site Board Alarm Collects on-site alarm information of a board.

Information

AISG Device Reset AISG Device Controls the AISG device through the AISG protocol
to reset it.

Self Test AISG Device Controls the AISG device through the AISG protocol
to start a self-check.

Clean AISG Device Clears the alarms of the AISG device.

Alarm

RET Calibrate Controls the RET device through the AISG protocol
for calibration.

Query AISG Device Queries alarm status of the AISG device.

Alarm

Set RET Tilt Sets the tilt of the electrically tuned antenna.

Set Mode Sets the working mode of the tower mounted amplifier
to normal or bypass mode. In bypass mode, the tower
mounted amplifier is disabled. In normal mode, the
tower mounted amplifier is enabled.

Query Gain Queries the gain of the tower mounted amplifier.

Query Mode Queries the working mode of the tower mounted

amplifier.

RET Query Tilt Query Queries the tilt of the electrically tuned antenna.
Mode

Send Configuration Data Sends the configuration data that is provided by the
AISG device provider to the specified AISG device
for upgrade.

Query Wave Trap Type Queries the type of the wave trap.

3-4

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Chapter 3 Dynamic Management Commands

Resource Type Command Name Command Description

Query Wave Trap Switch Queries the on/off status of the wave trap.
Status

Set Wave Trap Switch to Turns on the wave trap.

Open

Set Wave Trap Switch to Turns off the wave trap.

Close

AISG1.1 Batch Query Queries the data of the RET 1.1 devices in batches.
Antenna Device Data

AISG1.1 Batch Query Queries the data of the TMA 1.1 devices in batches.
TMA Device Data

AISG1.1 Batch Query Queries the data of the ACOM 1.1 devices in batches.
ACOM Device Data

AISG2.0 Batch Query Queries the data of the RET 2.0 devices in batches.
Antenna Device Data

AISG2.0 Batch Query Queries the data of the TMA 2.0 devices in batches.
TMA Device Data

AISG2.0 Batch Query Queries the data of the wave trap 2.0 devices in
Wave Trap Device Data batches.

AISG1.1 Batch Set Sets the data of the RET 1.1 devices in batches.
Antenna Device Data

AISG1.1 Batch Set TMA Sets the data of the TMA 1.1 devices in batches.
Device Data

AISG1.1 Batch Set Sets the data of the ACOM 1.1 devices in batches.
ACOM Device Data

AISG2.0 Batch Set Sets the data of the RET 2.0 devices in batches.
Antenna Device Data

AISG2.0 Batch Set TMA Sets the data of the TMA 2.0 devices in batches.
Device Data

AISG2.0 Batch Set Sets the data of the wave trap 2.0 devices in batches.
Wave Trap Device Data

Query Device Queries AISG device information.

information

TCP Query TCP Queries TCP parameters.

ATM Layer Link Query IMA Parameter Queries IMA parameters.

Routing Query Routing detection Queries the status of the routing detection table.
Detection Object

3-5

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

ZXSDR OMMB Dynamic Data Management Operation Guide

Resource Type Command Name Command Description

Fan Device Query FAN Queries fans.

Auto-Control FAN Sets auto-control for the fan.

Manually Control FAN Sets manual control for the fan.

Stop Dusting Mode Stops dusting mode for the fan.

Start Dusting Mode Starts dusting mode for the fan.

SCTP Query SCTP Queries the status of the SCTP link.

Reset SCTP Resets the SCTP link.

Block SCTP Blocks the SCTP link.

Unblock SCTP Unblocks the SCTP link.

Disconnect SCTP Disconnects the SCTP link.

STM-1 Query STM-1 Link Queries an STM-1 link.

Block STM-1 Link Blocks an STM-1 link.

Unblock STM-1 Link Unblocks an STM-1 link.

Channelized Query Channel STM-1 Queries a channelized STM-1 link.

STM-1 Link

Block Channel STM-1 Blocks a channelized STM-1 link.

Link

Unblock Channel STM-1 Unblocks a channelized STM-1 link.

Link

Rack Reset RF Subsystem Resets the Radio Frequency (RF) subsystem of a

specified rack.

Sub-rack Reset Baseband Resets the baseband subsystem of a specified

Subsystem sub-rack.

T1 Query T1 Link Queries T1 link.

Bidirectional Query BFD Queries the BFD parameters.

Forwarding
Detection

Physical Layer Query PhyLayer Device Queries physical layer devices.

Port

HDLC channel Query HDLC Queries the status of the HDLC channel.

SaalUni Query AAL5 Queries the status of the AAL5 link.

Ethernet Fault Query and Detect Queries the status of Ethernet fault detection.
Detection Ethernet Fault
Configuration

3-6

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Chapter 3 Dynamic Management Commands

Resource Type Command Name Command Description

Optical Port Query Optical Fiber Port Queries the status of the optical port.
Device

PPP Link Query PPP Link Queries a PPP link.

3-7

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

ZXSDR OMMB Dynamic Data Management Operation Guide

This page intentionally left blank.

3-8

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential

 Glossary
AISG
- Antenna Interface Standards Group
ATM
- Asynchronous Transfer Mode
BPL
- Baseband Processing for LTE
CC
- Control and Clock Module
EMS
- Element Management System
HDLC
- High-level Data Link Control
PM
- Power Module
PPP
- Point-to-Point Protocol

SCTP
- Stream Control Transmission Protocol

TCP
- Transmission Control Protocol

SJ-20130704144811-007|2013-08-30 (R1.0) ZTE Proprietary and Confidential