2141P, 2141PSP and 2151P1SP Air Impact Wrench Exploded - View

25
27

24
28
29
30
39

31
32
33
40 41

26
23
12

36
38
37
20
22

44
21

43

35
42
13

34
7
4
15

14

1
14

6
5
9
17

2
18

3
16

19
10

(Dwg. TPA1844)

04584066
Edition 3
October 2009
2141P, 2141PSP, and 2151P1SP Air Impact Wrench - Parts List
Item Part Description Part Number Item Part Description Part Number
1 Cylinder 2141-3 Inlet Bushing Assembly 2141-D565
2 Front End Plate 2141-11B 24 Inlet Bushing 2141-565
3 Front Rotor Bearing R38P-606 25 Inlet Bushing Screen 5RA-61
4 Rear Rotor Bearing 2131-97 26 Inlet Retainer Clip 2141-57
•5 Vane Packet (set of 6 Vanes) 2141-42-6 27 Inlet Parts Kit 2141-K303
6 Rotor 2141-53 28 Inlet Parts Kit R4-210
7 Rear Rotor Bearing Retainer 2131-6 29 Tilt Valve Spring 2131-51
8 Motor Gasket 2141-283 30 Tilt Valve 2141-302
9 Anvil 31 Tilt Valve Seat 2141-303
for 2141P and 2141PSP 2141P-726 32 Tilt Valve Seat Support 2141-306
for 2151P1SP 2151-726 33 Tilt Valve Retainer SML8-24
• 10 Socket Retainer • 34 Trigger Assembly 2141-A93
for 2141P and 2141PSP RR10034S 35 Trigger O-Ring 2131-158
for 2151P1SP RR10015S 36 Reverse Valve Assembly 2141-A329
12 Hammer Case Screw (4) 2141-638 37 Reverse Valve Assembly 2141-168
Hammer Frame Assembly 2141-A703 38 Reverse Valve O-Ring (bottom) (blue) 2141-167
13 Hammer Frame 2141-703 39 Button Kit 2141-K75
14 Hammer Pin (2) 2141-704 40 Forward Button ---
15 Hammer (2) 2141-724 41 Reverse Button ---
16 Hammer Case Assembly 42 Power Management Dial 2131-A249
for 2141P 2141-727 43 Power Management Dial Seal PS3-42
for 2141PSP 2141SP-727 44 Inlet Clip Removal Tool 2131-322
for 2151P1SP 2151SP-727 * ATEX Label
17 Hammer Case Bushing for 2141PSP and 2151P1SP ATEX-IMPACTOOL-99
for 2141P 2141-641 * Grease (1 lb) (for external lubrication of
for 2141PSP 2141SP-641 the impact mechanism) 115-1LB
for 2151P1SP 2151SP-641 * Grease (for lubrication when
18 Grease Fitting D0F9-879 disassembling and assembling
• 19 Hammer Case Gasket 2141-36 the impact mechanism)
20 Housing Assembly 1 lb 105-1LB
for 2141P 2141P-A40 8 lb 105-8LB
for 2141PSP 2141PSP-D40 * Protective Cover 2141-P32
for 2151P1SP 2151P1SP-D40 * Grease Gun R000A2-228
21 Housing Label * Tune-up Kit (includes illustrated
for 2141P 2141P-99 parts: 3, 4, 5, 7, 8, 19, 25, 27, 35, 2141-TK1
for 2141PSP 2141PSP-99 37, 38 and 43)
for 2151P1SP 2151P1SP-300
22 Warning Label WARNING-2-99
23 Nameplate 2141-301A
* Not illustrated.
• To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each
part indicated by a Bullet (•) for every four tools in service.

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.

Related Documentation
For additional information refer to:
Air Impact Wrench Product Safety Information Manual 04580916.
Air Impact Wrench Product Information Manual 04584710.
Air Impact Wrench Maintenance Information Manual Form 04584058.
Manuals can be downloaded from www.ingersollrandproducts.com
www.ingersollrandproducts.com 04584066
© 2009 Ingersoll Rand Company Edition 3
October 2009