Each Atmel datasheet includes an Ordering Information Section which specifies the

package types available. This section provides size specifications and outlines for all
package types.(1)

Package Description See Page

32A 32-lead, Low-profile (1.4 mm) Plastic Quad Flat Package (LQFP) . .5
44A 44-lead, Thin (1.0 mm) Plastic
Quad Flat Package (TQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
48A 48-lead, Low Profile (1.4) Plastic Quad Flat Package (LQFP) . . . . . .5 Standard
64A 64-lead Thin (1.0 mm) Plastic Quad Flat Package (TQFP) . . . . . . . .5
100A 100-lead, Thin (1.0 mm) Plastic Quad Flat Package (TQFP) . . . . . . .6
Package
144A 144-lead, Low Profile (1.4 mm) Plastic Outlines
Quad Flat Package (LQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
32B 32-lead, 0.600" Wide, Ceramic Side
Braze Dual Inline (Side Braze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
40B 40-lead, 0.600" Wide, Ceramic Side
Braze Dual Inline (Side Braze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
352B 352-ball Ball Grid Array (BGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
432B 432-ball Ball Grid Array (BGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8C 8-lead,0.230" Wide, Leadless Array Package (LAP) . . . . . . . . . . . . .7
8C1 8-lead,0.300" Wide, Leadless Array Package (LAP) . . . . . . . . . . . . .7
14C1 14-ball (3 x 5 array) 1.0 mm Pitch, 4.5 x 7.0 mm Plastic
Chip-Scale Ball Grid Array (CBGA) . . . . . . . . . . . . . . . . . . . . . . . . . .8
24C1 24-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . . .8
24C2 24-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . . .8
24C3 24-Ball (5 x 5 array), 1.0 mm Pitch, Plastic Chip-scale
Ball Grid Array (CBGA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
42C1 42-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . . .9
42C2 42-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . . .9
48C1 48-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . . .9
48C2 48-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . . .9
72C1 72-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . . .10
120C1 120-ball, Plastic Chip-Size Ball Grid Array Package (CBGA). . . . . .10
16D3 16-lead, 0.300" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . .10
20D3 20-lead, 0.300" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . .10
24D3 24-lead, 0.300" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . .11

Rev. 0555C–06/99
Note: 1. Dimensions shown do not include lead plating or mold flash.

1
Package Description See Page

24D6 24-lead, 0.600" Wide, Non-Windowed,

Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
28D6 28-lead, 0.600" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
32D6 32-lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . .11
40D6 40-lead, 0.600" Wide, Non-Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . .12
24DW3 24-lead, 0.300" Wide, WIndowed, Ceramic Dual Inline Package (Cerdip). . . . . . . . . . . . . . . . . . . . . . . . .12
24DW6 24-lead, 0.600" Wide, Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . .12
28DW6 28-lead, 0.600" Wide, Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . .12
32DW6 32-lead, 0.600" Wide, Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . .13
40DW6 40-lead, 0.600" Wide, Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . .13
42DW6 42-lead, 0.600" Wide, Windowed, Ceramic Dual Inline Package (Cerdip) . . . . . . . . . . . . . . . . . . . . . . . . .13
28F 28-lead, Non-Windowed, Ceramic Bottom-Brazed Flat Package (Flatpack) . . . . . . . . . . . . . . . . . . . . . . .13
32F 32-lead, Non-WIndowed, Ceramic Bottom-Brazed Flat Package (Flatpack) . . . . . . . . . . . . . . . . . . . . . . .14
20J 20-lead, Plastic J-leaded Chip Carrier (PLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
28J 28-lead, Plastic J-leaded Chip Carrier (PLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
32J 32-lead, Plastic J-leaded Chip Carrier (PLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
44J 44-lead, Plastic J-leaded Chip Carrier (PLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
68J 68-lead, Plastic J-leaded Chip Carrier (PLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
84J 84-lead, Plastic J-leaded Chip Carrier (PLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
32K 32-lead, Non-Windowed, Ceramic J-leaded Chip Carrier (JLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
44K 44-lead, Non-Windowed, Ceramic J-leaded Chip Carrier (JLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
28KW 28-lead, Windowed, Ceramic J-leaded Chip Carrier (JLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
32KW 32-lead, Windowed, Ceramic J-leaded Chip Carrier (JLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
44KW 44-lead, Windowed, Ceramic J-leaded Chip Carrier (JLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
68KW 68-lead, Windowed, Ceramic J-leaded Chip Carrier (JLCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
20L 20-pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
28L 28-pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
32L 32-pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
44L 44-pad, Non-Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
28LW 28-pad, Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
32LW 32-pad, Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
44LW 44-pad, Windowed, Ceramic Leadless Chip Carrier (LCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
8M 8-lead, 0.118" Wide, Miniature Small Outline (MSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
48M1 48-ball, Micro Ball Grid Array Package (mBGA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
8P3 8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

2 Packages
 Packages

Package Description See Page

16P3 16-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
20P3 20-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
24P3 24-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
28P3 28-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
24P6 24-lead, 0.600" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
28P6 28-lead, 0.600" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
32P6 32-lead, 0.600" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
40P6 40-lead, 0.600" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
42P6 42-lead, 0.600" Wide, Plastic Dual Inline Package (PDIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
44Q 44-lead, Plastic Gull Wing Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
132Q 132-lead, Bumpered Plastic Gull Wing Quad Flat Package (BQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
136Q 136-lead, Plastic Gull Wing Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
144Q 144-lead, Plastic Gull Wing Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
160Q 160-lead, Plastic Gull Wing Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
208Q 208-lead, Plastic Gull Wing Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
240Q 240-lead, Plastic Gull Wing Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
100Q1 100-lead Plastic Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
100Q2 100-lead Plastic Quad Flat Package (PQFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
28R 28-lead, 0.330" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
32R 32-lead, 0.440" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
40R 40-lead, 0.440" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
44R 44-lead, 0.525" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
14S 14-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . .25
16S 16-lead, 0.300" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . .25
16S1 16-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . .25
16S2 16-lead, 0.300" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . .26
20S 20-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
24S 24-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
28S 28-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
8S1 8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
8S2 8-lead, 0.210" Wide, Plastic Gull Wing Small Outline (EIAJ SOIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
8T 8-lead, Plastic Thin Shrink Small Outline Package (TSSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
14T 14-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
20T 20-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
28T 28-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

3
Package Description See Page

32T 32-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

40T 40-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
48T 48-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
86T 86-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
28U 28-pin, Ceramic Pin Grid Array (PGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
30U 30-pin, Ceramic Pin Grid Array (PGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
48U 48-ball, Micro Ball Grid Array Package (µBGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
180U 180-pin, Ceramic Pin Grid Array (PGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
68UW 68-pin, Ceramic Pin Grid Array (PGA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
32V 32-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
40V 40-lead, Plastic Thin Small Outline Package (TSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
20X 20-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
24X 24-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
20Y 20-lead, 5.3 mm Wide, Plastic Shrink Small Outline (SSOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

4 Packages
 Packages

Packaging Information
32A, 32-lead, Low-profile (1.4 mm) Plastic Quad 44A, 44-lead, Thin (1.0 mm) Plastic Quad Flat
Flat Package (LQFP) Package (TQFP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*
JEDEC STANDARD MS-026 ACB JEDEC STANDARD MS-026 ACB

PIN 1 ID 9.00 (0.354) BSC 12.21(0.478)

PIN 1 ID SQ
11.75(0.458)

0.45 (0.018)
0.30 (0.012)
0.45(0.018)
0.80(0.031) BSC 0.30(0.012)
0.80 (0.031) BSC 9.00 (0.354) BSC

10.10(0.394)
SQ
9.90(0.386)
1.20(0.047) MAX
7.00 (0.276) BSC 0
1.20 (0.047) MAX 0.20(.008) 7
0.09(.003)
0˚
0.20 (0.008) 7˚
0.10 (0.004) 0.75(0.030) 0.15(0.006)
0.45(0.018) 0.05(0.002)

0.75 (0.030) 0.15 (0.006)

0.45 (0.018) 0.05 (0.002)
*Controlling dimension: millimeters
*Controlling dimensions: millimeters

48A, 48-lead, Low Profile (1.4 mm) Plastic Quad Flat 64A, 64-lead, Thin (1.0 mm) Plastic Quad Flat
Package (LQFP) Package (TQFP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*
JEDEC STANDARD MS-026 ACB JEDEC STANDARD MS-026 AEB

16.25(0.640)
SQ
9.25(.364) 15.75(0.620)
PIN 1 ID SQ
8.75(.344)

PIN 1 ID

0.27(0.011) 0.45(0.018)
0.50(0.020) BSC 0.17(0.007) 0.30(0.012)
0.80(0.031) BSC

7.1(0.280)
SQ
6.9(0.272)
1.60(0.063) MAX
0˚
0.20(.008) 7˚
0.09(.003) 14.10(0.555)
SQ 1.20 (.047) MAX
13.90(0.547)
0.20(0.008)
0.75(0.030) 0.15(0.006) 0-7
0.10(0.004)
0.45(0.018) 0.05(0.002)
0.75(0.030) 0.15(0.006)
0.45(0.018) 0.05(0.002 )
*Controlling dimension: millimeters
*Controlling dimension: millimeters

5
Packaging Information
100A, 100-lead, Thin (1.0 mm) Plastic Quad Flat 144A, 144-lead, Low Profile (1.4 mm) Plastic Quad
Package (TQFP) Flat Package (LQFP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*
JEDEC STANDARD MS-026 AED JEDEC STANDARD MS-026 BFB

16.25(0.640) 22.25(0.876)
15.75(0.620) 21.75(0.856)

PIN 1 ID PIN 1 ID

0.27(0.011)
0.17(0.007)
0.27(0.011)
0.56(0.022) 0.17(0.007)
0.44(0.018)

0.56(0.022)
0.44(0.018)

14.10(0.555) 1.05(0.041)
13.90(0.547) 0.95(0.037) 20.1(0.791)
0.20(0.008)
19.9(0.783) 1.45(0.057)
0-7
0.20(0.008) 0-7
0.10(0.004) 1.35(0.053)
0.15(0.006)
0.10(0.004)
0.75(0.030)
0.45(0.018) 0.05(0.002) 0.75(0.030) 0.15(0.006)
0.45(0.018) 0.05(0.002)
*Controlling dimension: millimeters
*Controlling dimension: millimeters

32B, 32-lead, 0.600" Wide, Ceramic Side Braze Dual 40B, 40-lead, 0.600" Wide, Ceramic Side Braze Dual
Inline (Side Braze) Inline (Side Braze)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-16 CONFIG C MIL-STD-1835 D-5 CONFIG C

6 Packages
 Packages

Packaging Information
352B, 352-ball Ball Grid Array (BGA) 432B, 432-ball Ball Grid Array (BGA)
Dimensions in (Millimeters) and Inches Dimensions in (Millimeters) and Inches

1.38 (35.1 ) 0.88 (.035) 1.58 (40.1) .035 (0.88)

1.37 (34.9) .030 (0.76) 1.53 (39.9) .030 (0.76)

1.58 (40.1)
1.38 (35.1) 1.53 (39.9)
1.37 (34.9)

0.062 (1.58) MAX 0.062 (1.58) MAX

(1.25) (1.25)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

EE KK
DD JJ
HH
CC
GG
BB FF
AA EE
Z DD
Y CC
X BB
AA
W
Z
V
Y
U X
T
R
1.25 (31.85) W
V 1.50 (38.20)
P 1.25 (31.65) U
T 1.50 (38.00)
N
R
M
P
L N
K M
J L
H K
G J
H
F
G
E
F
D E
C D
B C
A B
A

(1.27) (1.27)
(1.27) (1.27)
1.25 (31.85) 1.50 (38.20)
1.25 (31.65) 1.50 (38.00)

8C, 8-lead,0.230" Wide, Leadless Array Package 8C1, 8-lead 0.300" Wide, Leadless Array Package
(LAP) (LAP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

SIDE
SIDE
TOP VIEW VIEW
TOP VIEW VIEW

5.03 (0.198) 5.10 (0.201)

4.83 (0.190) 4.90 (0.193)

1.14 (0.045) 8.10 (0.319) 1.14 (0.045)

6.09 (0.240)
5.89 (0.232) 0.94 (0.037) 7.90 (0.311) 0.94 (0.037)
0.38 (0.015) 0.38 (0.015)
0.30 (0.012) BOTTOM VIEW 0.30 (0.012)
BOTTOM VIEW
1.32 (0.052) 1.19 (0.047) 1.32 (0.052) 1.22 (0.048)
1.22 (0.048) 1.09 (0.043) 1.22 (0.048) 1.12 (0.044)
8 1
8 1
0.61 (0.024) 0.95 (0.037)
7 2 0.85 (0.033)
3.86 (0.152) 0.51 (0.020) 7 2
3.76 (0.148) 4.76 (0.187)
6 3
4.66 (0.183) 6 3
5 4
5 4
0.89 (0.035)
0.60 (0.024) 0.92 (0.036)
0.79 (0.031) 0.34 (0.013)
0.50 (0.020) 0.82 (0.032)
0.24 (0.009)

* Controlling dimension: millimeters * Controlling dimension: millimeters

7
Packaging Information
14C1, 14-ball (3 x 5 array) 1.0 mm Pitch, 24C1, 24-ball (5 x 5 Array), 1.0mm Pitch, 8 x 6mm
4.5 x 7.0 mm Plastic Chip-Scale Ball Grid Plastic Chip-Scale Ball Grid Array Package (CBGA)
Array (CBGA) Dimensions in Millimeters and (Inches)*
Dimensions in Millimeters and (Inches)

4.7 (0.185) 6.2 (0.244)

4.3 (0.169 ) 5.8 (0.228 )

7.2 (0.283) 8.2 (0.323)

6.8 (0.268) 7.8 (0.307)

0.30 (0.012)
0.30 (0.012)
1.40 (0.055) MAX
2.0 (0.079) 1.40 (0.055) MAX
1.12 (0.044)
0.86 (0.034) 4.0 (0.157) 2.12 (0.083)
1.37 (0.054) 1.62 (0.064)
5 4 3 2 1 1.86 (0.073)
1.13 (0.044) 3 2 1 1.38 (0.054)

A
A
B
B
C 4.0 (0.157)
C 4.0 (0.157)
D

D
E

1.00 (0.039) BSC 0.46 (0.018)

NON-ACCUMULATIVE DIA BALL TYP
1.00 (0.039) BSC 0.46 (0.018)
NON-ACCUMULATIVE DIA BALL TYP
* Controlling dimension: millimeters

24C2, 24-ball (5 x 5 Array), 1.0mm Pitch, 7 x 9.5mm 24C3, 24-Ball (5 x 5 array), 1.0mm Pitch,
Plastic Chip-Scale Ball Grid Array Package (CBGA) Plastic Chip-scale Ball Grid Array (CBGA)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

7.2 (0.283)
6.8 (0.268) TBD

9.7 (0.381)
9.3 (0.366)
TBD

0.30 (0.012)
1.40 (0.055) MAX 0.30 (0.012)
1.40 (0.055) MAX

1.62 (0.064)
1.36 (0.054) 4.0 (0.157) 2.87 (0.113) TBD
5 4 3 2 1 2.61 (0.103) 4.0 (0.157)
5 4 3 2 1 TBD

B A

C 4.0 (0.157) B

D C 4.0 (0.157)

E D

0.46 (0.018)
DIA BALL TYP
0.46 (0.018)
1.00 (0,039) BSC DIA BALL TYP
NON-ACCUMULATIVE
1.00 (0,039) BSC
* Controlling dimension: millimeters NON-ACCUMULATIVE

8 Packages
 Packages

Packaging Information
42C1, 42-ball (7 x 6 Array), 1.0mm Pitch, 8 x 8mm 42C2, 42-ball (7 x 6 Array), 1.0mm Pitch, 8 x 14mm
Plastic Chip-Scale Ball Grid Array Package (CBGA) Plastic Chip-Scale Ball Grid Array Package (CBGA)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

8.2 (0.323) 8.2 (0.323)

7.8 (0.307)
7.8 (0.307)

8.2 (0.323) 14.2 (0.559)

7.8 (0.307) 13.8 (0.543)

0.30 (0.012)
0.30 (0.012)
1.40 (0.055) MAX
1.40 (0.055) MAX
1.12 (0.044) 1.12 (0.044)
0.86 (0.034) 6.0 (0.236) 1.63 (0.064) 0.86 (0.034) 6.0 (0.236) 4.6 (0.181)
7 6 5 4 3 2 1 1.37 (0.054) 7 6 5 4 3 2 1 4.3 (0.169)

B A

B
C
5.0 (0.197) C
5.0 (0.197)
D D

E E

F
F

0.46 (0.018)
DIA BALL TYP
0.46 (0.018)
1.00 (0,039) BSC
DIA BALL TYP 1.00 (0,039) BSC
NON-ACCUMULATIVE
NON-ACCUMULATIVE

*Controlling dimension: millimeters *Controlling dimension: millimeters

48C1, 48-ball (8 x 6 Array), 0.75mm Pitch, 7 x 7mm 48C2, 48-ball (6 x 8 Array), 0.80mm Pitch, 8 x 10mm
Plastic Chip-Scale Ball Grid Array Package (CBGA) Plastic Chip-Scale Ball Grid Array Package (CBGA)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

8.2 (0.322)
7.2 (0.283) 7.8 (0.307)

6.8 (0.268)

7.2 (0.283)
6.8 (0.268) 10.2 (0.401)
9.8 (0.386)

0.25 (0.010)
1.25 (0.049) MAX
0.30 (0.012)
1.0 (0.040) 1.20 (0.047)
1.00 (0.039)
0.74 (0.029) 5.25 (0.207) 1.75 (0.69) 2.12 (0.083)
4.0 (0.157)
8 7 6 5 4 3 2 1 1.48 (0.58) 1.86 (0.073) 6 5 4 3 2 1

2.32 (0.091)
2.06 (0.081)
A
A

B B

C C
3.75 (0.148) D
D 5.6 (0.220)
E
E
F

F G

0.75 (0.030) BSC 0.30 (0.012)

NON-ACCUMULATIVE DIA BALL TYP
0.80 (0.031) BSC 0.46 (0.018)
NON-ACCUMULATIVE DIA BALL TYP

*Controlling dimension: millimeters *Controlling dimension: millimeters

9
Packaging Information
72C1, 72-ball (12 x 6 Array), 1.0mm Pitch, 13 x 9mm 120C1, 120-ball (17 x 17 Array), 1.0 Pitch, 19 x
Plastic Chip-Scale Ball Grid Array Package (CBGA) 19mm Ceramic Multi-Die Ball Grid Array Package
Dimensions in Millimeters and (Inches)* (CerMBGA)
Dimensions in Millimeters and (Inches)*

13.2 (0.520) 19.1 (.752) 1.3 (.051)

12.8 (0.504) 18.9 (.744) 1.0 (.039)

9.2 (0.362)
19.1 (.752)
8.8 (0.346)
18.9 (.744)

0.30 (0.012)
1.40 (0.55) MAX
1.6 MAX
0.46 (0.018)
11.0 (0.43)
DIA 1.5
12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
BALL,
TYP U
T
A
R
Q
B P
N
C M
L
5.0 (0.19) K 16.15 (.636)
D J
H
15.85 (.624)
E G
F
E
F
D
C
B
A
2.12 (0.083)
1.86 (0.73) 1.0 1.0
1.12 (0.044) 1.00 (0.039) MAX 16.15 (.636)
0.86 (0.034) NON-ACCUMULATIVE 15.85 (.624)

*Controlling dimension: millimeters *Controlling dimension: millimeters

16D3, 16-lead, 0.300" Wide, Non-Windowed, 20D3, 20-lead, 0.300" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) Ceramic Dual Inline Package (Cerdip)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-2 CONFIG A MIL-STD-1835 D-8 CONFIG A

.830(21.1) .985(25.0)
.770(19.6) PIN .935(23.7) PIN
1 1

.310(7.87) .310(7.87)
.285(7.24) .285(7.24)
.065(1.65) .098(2.49)
0.700(17.78) REF MAX .900(22.87) MAX
.200(5.08) .005(.127) .200(5.08) .005(.127)
MAX MIN MAX MIN

SEATING SEATING
PLANE PLANE
.055(1.40) .060(1.52)
.175(4.45) .025(.635) .200(5.08) .015(.381)
.125(3.18) .021(.533) .125(3.18) .023(.584)
.060(1.52) .014(.356) .065(1.65) .014(.356)
.110(2.79) .040(1.02) .110(2.79) .045(1.14)
.090(2.29) .320(8.13) .090(2.29) .325(8.25)
.290(7.37) .300(7.62)
0 REF 0 REF
.015(.381) 15 .015(.381) 15
.008(.203) .008(.203)
.400(10.2) MAX .400(10.2) MAX

10 Packages
 Packages

Packaging Information
24D3, 24-lead, 0.300" Wide, Non-Windowed, 24D6, 24-lead, 0.600" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) Ceramic Dual Inline Package (Cerdip)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-9 CONFIG A MIL-STD-1835 D-3 CONFIG A

1.29(32.8)
1.28(32.5) 1.24(31.5) PIN
1.24(31.5) 1
PIN
1

.310(7.87) .610(15.5)
.510(13.0)
.285(7.24)
.098(2.49)
MAX .098(2.49)
1.100(27.94) REF MAX
.005(.127) 1.100(27.94) REF
.200(5.08) .005(.127)
MAX MIN .225(5.72)
MAX MIN

SEATING
PLANE SEATING
.060(1.52) PLANE
.060(1.52)
.200(5.08) .015(.381) .200(5.08) .015(.381)
.125(3.18) .023(.584) .125(3.18)
.023(.584)
.065(1.65) .014(.356) .065(1.65)
.014(.356)
.110(2.79) .045(1.14) .110(2.79) .045(1.14)
.090(2.29) .090(2.29)
.325(8.25) .620(15.7)
.300(7.62) .590(15.0)
0 REF
0 REF 15
.015(.381) .015(.381)
15 .008(.203)
.008(.203)
.400(10.2) MAX .700(17.8) MAX

28D6, 28-lead, 0.600" Wide, Non-Windowed, 32D6, 32-lead, 0.600" Wide, Non-Windowed,
Ceramic Dual Inline Package (Cerdip) Ceramic Dual Inline Package (Cerdip)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-10 CONFIG A MIL-STD-1835 D-16 CONFIG A

1.49(37.9) 1.68(42.7)
1.44(36.6) PIN 1.64(41.7) PIN
1 1

.610(15.5) .610(15.5)
.510(13.0) .570(14.5)

.098(2.49) .098(2.49)
MAX MAX
1.300(33.02) REF 1.500(38.10) REF
.225(5.72) .005(.127)
.225(5.72) .005(.127)
MAX MIN
MAX MIN

SEATING
PLANE SEATING
.060(1.52) PLANE
.200(5.08) .060(1.52)
.015(.381) .200(5.08)
.125(3.18) .015(.381)
.023(.584) .125(3.18)
.065(1.65) .023(.584)
.014(.356) .065(1.65)
.110(2.79) .045(1.14) .014(.356)
.110(2.79) .045(1.14)
.090(2.29)
.620(15.7) .090(2.29)
.590(15.0) .620(15.7)
0 REF .590(15.0)
15 0 REF
.015(.381) 15
.008(.203) .015(.381)
.700(17.8) MAX .008(.203)
.700(17.8) MAX

11
Packaging Information
40D6, 40-lead, 0.600" Wide, Non-Windowed, 24DW3, 24-lead, 0.300" Wide, WIndowed, Ceramic
Ceramic Dual Inline Package (Cerdip) Dual Inline Package (Cerdip)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-5 CONFIG A MIL-STD-1835 D-9 CONFIG A

2.09(53.1)
2.04(51.8) PIN
1

.610(15.5)
.570(14.5)

.098(2.49)
1.900(48.26) REF MAX
.225(5.72) .005(.127)
MAX MIN

SEATING
PLANE
.060(1.52)
.200(5.08) .015(.381)
.125(3.18)
.065(1.65) .023(.584)
.040(1.02) .014(.356)
.110(2.79)
.090(2.29)
.620(15.7)
.590(15.0)
0 REF
15
.015(.381)
.008(.203)
.700(17.8) MAX

24DW6, 24-lead, 0.600" Wide, Windowed, Ceramic 28DW6, 28-lead, 0.600" Wide, Windowed, Ceramic
Dual Inline Package (Cerdip) Dual Inline Package (Cerdip)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-3 CONFIG A MIL-STD-1835 D-10 CONFIG A

1.29(32.8)
1.24(31.5) PIN
1

.610(15.5)
.510(13.0)

.098(2.49)
MAX
1.100(27.94) REF
.225(5.72) .005(.127)
MAX MIN

SEATING
PLANE
.060(1.52)
.200(5.08) .015(.381)
.125(3.18) .023(.584)
.065(1.65)
.014(.356)
.110(2.79) .045(1.14)
.090(2.29) .620(15.7)
.590(15.0)
0 REF
15
.015(.381)
.008(.203)
.700(17.8) MAX

12 Packages
 Packages

Packaging Information
32DW6, 32-lead, 0.600" Wide, Windowed, Ceramic 40DW6, 40-lead, 0.600" Wide, Windowed, Ceramic
Dual Inline Package (Cerdip) Dual Inline Package (Cerdip)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 D-16 CONFIG A MIL-STD-1835 D-5 CONFIG A

42DW6, 42-lead, 0.600" Wide, Windowed, Ceramic 28F, 28-lead, Non-Windowed, Ceramic Bottom-
Dual Inline Package (Cerdip) Brazed Flat Package (Flatpack)
Dimensions in Inches and (Millimeters) Dimensions in Inches (Millimeters)
MIL-STD-1835 F-12 CONFIG B

.370(9.40)
PIN #1 ID
.250(6.35)
.019(.483)
.015(.381)

.728(18.5) .050(1.27) BSC

.712(18.1)

.045(1.14) MAX

.416(10.6)
.384(9.75)

.006(.152)
.119(3.02)
.004(.102)
.087(2.21)

.077(1.96)
.043(1.09)
.045(1.14)
.286(7.26) .026(.660)
.274(6.96)

13
Packaging Information
32F, 32-lead, Non-WIndowed, Ceramic Bottom- 20J, 20-lead, Plastic J-leaded Chip Carrier (PLCC)
Brazed Flat Package (Flatpack) Dimensions in Inches and (Millimeters)
Dimensions in Inches and (Millimeters) JEDEC STANDARD MS-018 AA
MIL-STD-1835 F-18 CONFIG B
JEDEC OUTLINE MO-115

PIN #1 ID
.370(9.40)
.270(6.86)

.019(.482)
.015(.381)
.829(21.1)
.811(20.6)
.050(1.27) BSC

.488(12.4) .045(1.14) MAX

.472(12.0)

.120(3.05)
.006(.152) .098(2.49)
.004(.101)

.408(10.4)
.355(9.02) .045(1.14)
.026(.660)
.072(1.82)
.030(0.76)

28J, 28-lead, Plastic J-leaded Chip Carrier (PLCC) 32J, 32-lead, Plastic J-leaded Chip Carrier (PLCC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-018 AB JEDEC STANDARD MS-016 AE

.045(1.14) X 45° PIN NO. 1 .045(1.14) X 30° - 45° .025(.635) X 30˚ - 45˚
.012(.305) .045(1.14) X 45˚ PIN NO. 1
IDENTIFY .008(.203) .012(.305)
IDENTIFY
.008(.203)
.430(10.9)
.456(11.6) SQ .530(13.5)
SQ .390(9.91) .553(14.0)
.032(.813) .450(11.4) .021(.533) .490(12.4)
.032(.813) .547(13.9)
.026(.660) .495(12.6) .013(.330) .021(.533)
SQ .026(.660) .595(15.1)
.485(12.3) .585(14.9) .013(.330)
.050(1.27) TYP .043(1.09)
.300(7.62) REF SQ .020(.508) .050(1.27) TYP .030(.762)
.120(3.05) .300(7.62) REF .015(.381)
.090(2.29) .430(10.9) .095(2.41)
.180(4.57) .390(9.90) .060(1.52)
.165(4.19) AT CONTACT .140(3.56)
POINTS .120(3.05)

.022(.559) X 45° MAX (3X)

.022(.559) X 45˚ MAX (3X)

.453(11.5)
.447(11.4)
.495(12.6)
.485(12.3)

14 Packages
 Packages

Packaging Information
44J, 44-lead, Plastic J-leaded Chip Carrier (PLCC) 68J, 68-lead, Plastic J-leaded Chip Carrier (PLCC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-018 AC JEDEC STANDARD MS-018 AE

.045(1.14) X 45° PIN NO. 1 .045(1.14) X 30° - 45° .012(.305)

IDENTIFY .008(.203)

.656(16.7) .630(16.0)
SQ
.650(16.5) .590(15.0)
.032(.813) .021(.533)
.026(.660) .695(17.7) .013(.330)
SQ
.685(17.4)

.050(1.27) TYP .043(1.09)

.500(12.7) REF SQ .020(.508)
.120(3.05)
.090(2.29)
.180(4.57)
.165(4.19)

.022(.559) X 45° MAX (3X)

84J, 84-lead, Plastic J-leaded Chip Carrier (PLCC) 32K, 32-lead, Non-Windowed, Ceramic J-leaded
Dimensions in Inches and (Millimeters) Chip Carrier (JLCC)
JEDEC STANDARD MS-018 AF Dimensions in Inches and (Millimeters)

.035(.889) X 45°
.045(1.14) X 45° .010(.254)
.006(.152)

.565(14.4) .530(13.5)
.545(13.8) .490(12.4)
.032(.813) .021(.533)
.026(.660) .595(15.1) .017(.432)
.585(14.9)

.050(1.27) TYP .045(1.14)

.300(7.62) REF .027(.686)
.430(10.9) .103(2.62)
.390(9.90) .073(1.85)
AT CONTACT
.167(4.24)
POINTS
.140(3.56)

.465(11.8) 0.25(.635) RADIUS MAX (3X)

.445(11.3)
.495(12.6)
.485(12.3)

15
Packaging Information
44K, 44-lead, Non-Windowed, Ceramic J-leaded 28KW, 28-lead, Windowed, Ceramic J-leaded Chip
Chip Carrier (JLCC) Carrier (JLCC)
DImension in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 C-J7
JEDEC OUTLINE MO-087 AA
.035(.889) X 45° .035(.889) X 45°
.045(1.14) X 45° .010(.254) .045(1.14) X 45° .010(.254)
.006(.152) .006(.152)

.630(16.0) .430(10.9)
.665(16.9) .465(11.8)
SQ .590(15.0) SQ .390(9.91)
.645(16.4) .032(.813) .445(11.3)
.032(.813) .021(.533) .021(.533)
.695(17.7) .026(.660) .495(12.6)
.026(.660) SQ .017(.432) SQ .017(.432)
.685(17.4) .485(12.3)

.050(1.27) TYP .045(1.14) .050(1.27) TYP .045(1.14)

.500(12.7) REF SQ .035(.889) .300(7.62) REF SQ .035(.889)
.120(3.05) .120(3.05)
.090(2.29) .090(2.29)
.180(4.57)
.180(4.57)
.156(.396)
.156(3.96)

.025(.635) RADIUS MAX (3X) .025(.635) RADIUS MAX (3X)

32KW, 32-lead, Windowed, Ceramic J-leaded Chip 44KW, 44-lead, Windowed, Ceramic J-leaded Chip
Carrier (JLCC) Carrier (JLCC)
Dimensions and Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 CJ1

.035(.889) X 45°
.045(1.14) X 45° .010(.254)
.006(.152) .035(.889) X 45°
.045(1.14) X 45° .010(.254)
.006(.152)
.530(13.5)
.565(14.4) .490(12.4)
.545(13.8) .630(16.0)
.032(.813) .021(.533) .665(16.9)
.026(.660) .595(15.1) SQ .590(15.0)
.017(.432) .645(16.4)
.585(14.9) .032(.813)
.695(17.7) .021(.533)
.026(.660) SQ
.685(17.4) .017(.432)
.050(1.27) TYP .045(1.14)
.300(7.62) REF .027(.686)
.430(10.9) .050(1.27) TYP .045(1.14)
.103(2.62)
.390(9.90) .500(12.7) REF SQ .035(.889)
.073(1.85)
AT CONTACT .120(3.05)
.167(4.24)
POINTS .090(2.29)
.140(3.56)
.180(4.57)
.156(3.96)

.465(11.8) .025(.635) RADIUS MAX (3X)

.445(11.3)
.025(.635) RADIUS MAX (3X)
.495(12.6)
.485(12.3)

16 Packages
 Packages

Packaging Information
68KW, 68-lead, Windowed, Ceramic J-leaded Chip 20L, 20-pad, Non-Windowed, Ceramic Leadless
Carrier (JLCC) Chip Carrier (LCC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 C-J2 MIL-STD-1835 C-2
JEDEC OUTLINE MO-087 AD
.360 (9.14)
.342 (8.69)
.035(.889) X 45° .100 (2.54)
.040 X 45° .010(.254)
.085 (2.16)
.006(.152)

.093(23.6)
.965(24.5) .360 (9.14)
SQ .890(22.6) .342 (8.69)
.930(23.6)
.032(.813) .021(.533)
.026(.660) .995(25.3)
SQ .017(.432)
.985(25.0)

.070 (1.78)
.050(1.27) TYP .045(1.14) .055 (1.40)
PIN 1
.800 REF SQ .035(.889)
.055 (1.40)
.120(3.05) .045 (1.14) INDEX CORNER
.095 (2.41)
.090(2.29) .075 (1.91)

.200(5.08) .025 (.635)

X 45˚
.155(3.94) .015 (.381)
.012 (.305)
RADIUS
.007 (.178)
.200 (5.08) BSC

.029 (.737)
.021 (.533)

.050 (1.27) TYP .040 (1.02) X 45˚

.025(.635) RADIUS MAX (3X)
.085 (2.16)
.200 (5.08) BSC .065 (1.65)

28L, 28-pad, Non-Windowed, Ceramic Leadless 32L, 32-pad, Non-Windowed, Ceramic Leadless
Chip Carrier (LCC) Chip Carrier (LCC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 C-4 MIL-STD-1835 C-12

17
Packaging Information
44L, 44-pad, Non-Windowed, Ceramic Leadless 28LW, 28-pad, Windowed, Ceramic Leadless Chip
Chip Carrier (LCC) Carrier (LCC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 C-5 MIL-STD-1835 C-4

32LW, 32-pad, Windowed, Ceramic Leadless Chip 44LW, 44-pad, Windowed, Ceramic Leadless Chip
Carrier (LCC) Carrier (LCC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
MIL-STD-1835 C-12 MIL-STD-1835 C-5

18 Packages
 Packages

Packaging Information
8M, 8-lead, 0.118" Wide, Miniature Small Outline 48M1, 48-ball, (8 x 6 Array), 0.75mm Pitch, Micro
(MSOP) Ball Grid Array (mBGA)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

7.15 (0.281)
0.40 (0.016)
6.95 (0.274)
0.25 (0.010)

3.10 (0.122)
2.90 (0.114)
PIN 1 8.53 (0.336)
8.33 (0.328)

0.65 (0.026) TYP

3.10 (0.122) 0.15 (0.006) MIN

2.90 (0.114) 1.00 (0.039)
1.10 (0.043) 0.85 (0.033)
0.90 (0.035) NOM.
0.97 (0.038) 5.25 (0.207) 2.34 (0.92) NOM.
8 7 6 5 4 3 2 1

0.15 (0.006)
0.05 (0.002) A

C
0.23 (0.009) 3.75 (0.148)
D
0.13 (0.005)
E

3.81 F

(0.150)
REF
4.90 (0.193) 0.75 (0.030) BSC 0.30 (0.012)
REF NON-ACCUMULATIVE DIA BALL TYP

* Controlling dimension: millimeters * Controlling dimension: millimeters

8P3, 8-lead, 0.300" Wide, Plastic Dual Inline 16P3, 16-lead, 0.300" Wide, Plastic Dual Inline
Package (PDIP) Package (PDIP)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-001 BB

.400 (10.16) .790(20.1)

.355 (9.02) .740(18.8) PIN
1
PIN
1
.266(6.76)
.280 (7.11) .230(5.84)
.240 (6.10)
.080(2.03)
.037 (.940) 0.700(17.78) REF MAX
.300 (7.62) REF .027 (.690)
.200(5.06) .005(.127)
MAX MIN
.210 (5.33) MAX .100 (2.54) BSC
SEATING
SEATING PLANE
PLANE .070(1.78)
.151(3.84) .020(.508)
.015 (.380) MIN .125(3.18) .023(.584)
.150 (3.81) .014(.356)
.115 (2.92) .022 (.559) .065(1.65)
.070 (1.78) .014 (.356) .100(2.54) BSC
.040(1.02)
.045 (1.14)

.320(8.13)
.325 (8.26)
.290(7.37)
.300 (7.62)
0 0 REF
REF 15
.012 (.305) 15 .012(.305)
.008 (.203) .008(.203)
.430 (10.9) MAX .400(10.2) MAX

19
Packaging Information
20P3, 20-lead, 0.300" Wide, Plastic Dual Inline 24P3, 24-lead, 0.300" Wide, Plastic Dual Inline
Package (PDIP) Package (PDIP)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-001 AD JEDEC STANDARD MS-001 AF

1.060(26.9) 1.27(32.3)
.980(24.9) PIN 1.25(31.7) PIN
1 1

.280(7.11) .266(6.76)
.240(6.10) .250(6.35)

.090(2.29) .090(2.29)
.900(22.86) REF MAX 1.100(27.94) REF MAX
.210(5.33) .005(.127) .200(5.06) .005(.127)
MAX MIN MAX MIN

SEATING SEATING
PLANE PLANE
.070(1.78)
.150(3.81) .015(.381) MIN .151(3.84) .020(.508)
.115(2.92) .022(.559) .125(3.18) .023(.584)
.014(.356) .014(.356)
.070(1.78) .065(1.65)
.110(2.79) .110(2.79)
.045(1.13) .040(1.02)
.090(2.29) .090(2.29)

.325(8.26) .325(8.26)
.300(7.62) .300(7.62)
0 REF 0 REF
.014(.356) 15 15
.012(.305)
.008(.203) .008(.203)
.430(10.92) MAX .400(10.2) MAX

28P3, 28-lead, 0.300" Wide, Plastic Dual Inline 24P6, 24-lead, 0.600" Wide, Plastic Dual Inline
Package (PDIP) Package (PDIP)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-011 AA

1.27(32.3)
1.24(31.5) PIN
1

.566(14.4)
.530(13.5)

.090(2.29)
1.100(27.94) REF MAX
.220(5.59) .005(.127)
MAX MIN

SEATING
PLANE
.065(1.65)
.161(4.09) .015(.381)
.125(3.18)
.022(.559)
.065(1.65) .014(.356)
.110(2.79) .041(1.04)
.090(2.29)
.630(16.0)
.590(15.0)
0 REF
15
.012(.305)
.008(.203)
.690(17.5)
.610(15.5)

20 Packages
 Packages

Packaging Information
28P6, 28-lead, 0.600" Wide, Plastic Dual Inline 32P6, 32-lead, 0.600" Wide, Plastic Dual Inline
Package (PDIP) Package (PDIP)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-011 AB

1.67(42.4)
1.64(41.7) PIN
1.47(37.3)
1
1.44(36.6) PIN
1

.566(14.4)
.566(14.4) .530(13.5)
.530(13.5)

.090(2.29)
.090(2.29) 1.500(38.10) REF MAX
1.300(33.02) REF MAX .220(5.59) .005(.127)
.220(5.59) .005(.127) MAX MIN
MAX MIN
SEATING
SEATING PLANE
PLANE .065(1.65)
.065(1.65) .161(4.09) .015(.381)
.161(4.09) .015(.381) .125(3.18)
.125(3.18) .022(.559)
.022(.559) .065(1.65) .014(.356)
.065(1.65) .014(.356) .110(2.79) .041(1.04)
.110(2.79) .041(1.04)
.090(2.29)
.090(2.29) .630(16.0)
.630(16.0)
.590(15.0)
.590(15.0)
0 REF
0 REF
15
15
.012(.305) .012(.305)
.008(.203) .008(.203)
.690(17.5) .690(17.5)
.610(15.5) .610(15.5)

40P6, 40-lead, 0.600" Wide, Plastic Dual Inline 42P6, 42-lead, 0.600" Wide, Plastic Dual Inline
Package (PDIP) Package (PDIP)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)
JEDEC STANDARD MS-011 AC

2.07(52.6)
2.04(51.8) PIN
1

.566(14.4)
.530(13.5)

.090(2.29)
1.900(48.26) REF MAX
.220(5.59) .005(.127)
MAX MIN

SEATING
PLANE
.065(1.65)
.161(4.09) .015(.381)
.125(3.18)
.022(.559)
.065(1.65) .014(.356)
.110(2.79) .041(1.04)
.090(2.29)
.630(16.0)
.590(15.0)
0 REF
.012(.305) 15
.008(.203)
.690(17.5)
.610(15.5)

21
Packaging Information
44Q, 44-lead, Plastic Quad Flat Package (PQFP) 132Q, 132-lead, Bumpered Plastic Quad Flat
Dimensions in Millimeters and (Inches)* Package (BQFP)
JEDEC STANDARD MS-022 AB Dimensions in Millimeters and (Inches)*

13.45 (0.525)
SQ
12.95 (0.506)
PIN 1 ID

0.50 (0.020)
0.80 (0.031) BSC 0.35 (0.014)

10.10 (0.394)
SQ
9.90 (0.386)

2.45 (0.096) MAX

0
0.17 (0.007) 7
0.13 (0.005)

1.03 (0.041)
0.25 (0.010) MAX
0.78 (0.030)

* Controlling dimension: millimeters * Controlling dimension: millimeters

136Q, 136-lead, Plastic Quad Flat Package (PQFP) 144Q, 144-lead, Plastic Gull Wing Quad Flat
Dimensions in Millimeters and (Inches)* Package (PQFP)
Dimensions in Millimeters and (Inches)*

* Controlling dimension: millimeters * Controlling dimension: millimeters

22 Packages
 Packages

Packaging Information
160Q, 160-lead, Plastic Gull Wing Quad Flat 208Q, 208-lead, Plastic Gull Wing Quad Flat
Package (PQFP) Package (PQFP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

1.238(31.45)
SQ
1.218(30.95)
PIN 1 ID

.016(0.40)
.008(0.20)
.0256(0.65) BSC

1.106(28.10)
SQ .157(3.97)
1.098(27.90)
7 .127(3.22)
.009(0.23)
0
.004(0.10)
.037(0.95) .020(0.50)
.025(0.65) .002(0.05)

* Controlling dimension: millimeters * Controlling dimension: millimeters

240Q, 240-lead, Plastic Gull Wing Quad Flat 100Q1, 100-lead Plastic Quad Flat Package (PQFP)
Package (PQFP) Body +3.2 mm Footprint
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

17.44 (0.687)
PIN 1 ID
16.95 (0.667)

0.65 (0.026) BSC 20.12 (.792)

19.87 (.782)
0.41 (0.016)
0.22 (0.009) 23.45 (0.923)
22.95 (0.904)

14.12 (0.556)
7 13.87 (0.546) 3.40 (.134) MAX
0.25 (0.010) 0
0.10 (0.004)
1.03 (0.041)
0.73 (0.028) 0.10 (0.004) MIN

* Controlling dimension: millimeters * Controlling dimension: millimeters

23
Packaging Information
100Q2,100-lead Plastic Quad Flat Package (PQFP) 28R, 28-lead, 0.330" Wide, Plastic Gull Wing Small
Dimensions in Millimeters and (Inches)* Outline (SOIC)
Dimensions in Inches and (Millimeters)

19.10 (0.752)
18.49 (0.728)

PIN 1 ID

0.65 (0.26) BSC 20.12 (0.792)

19.87 (0.782)

0.41 (0.016)
0.22 (0.009) 25.10 (0.988)
24.48 (0.964)

14.12 (0.556)
13.87 (0.546)
7 3.40 (0.134) MAX
0.25 (0.010) 0
0.10 (0.004)
1.40 (0.055)
0.99 (0.039) 0.10 (0.004) MIN

* Controlling dimension: millimeters

32R, 32-lead, 0.440" Wide, Plastic Gull Wing Small 40R, 40-lead, 0.440" Wide, Plastic Gull Wing Small
Outline (SOIC) Outline (SOIC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

1.030(26.16)
1.020(25.91)

.009(.231)
.004(.102)

24 Packages
 Packages

Packaging Information
44R, 44-lead, 0.525" Wide, Plastic Gull Wing Small 14S, 14-lead, 0.150" Wide, Plastic Gull Wing Small
Outline (SOIC) Outline (JEDEC SOIC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

.020 (.508)
.013 (.330)

.158 (4.01) .244 (6.20)

PIN 1 .152 (3.86) .228 (5.79)

.050 (1.27) BSC

.344 (8.74)
.337 (8.56) .068 (1.73)
.053 (1.35)

.010 (.249)
.004 (.102)

0 REF
8 .010 (.249)
.008 (.191)

.050 (1.27)
.016 (.406)

16S, 16-lead, 0.300" Wide, Plastic Gull Wing Small 16S1, 16-lead, 0.150" Wide, Plastic Gull Wing Small
Outline (SOIC) Outline (JEDEC SOIC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

0.020 (0.51)
0.013 (0.33)

0.158 (4.00) 0.244 (6.20)

0.150 (3.80) 0.228 (5.80)
PIN 1

.050 (1.27) BSC

0.394 (10.00)
0.386 (09.80) 0.069 (1.75)
0.053 (1.35)

0.010 (0.25)
0.004 (0.10)

0
REF 0.010 (0.25)
8
0.008 (0.19)

0.050 (1.27)
0.016 (0.40)

25
Packaging Information
16S2, 16-lead, 0.300" Wide, Plastic Gull Wing Small 20S, 20-lead, 0.300" Wide, Plastic Gull Wing Small
Outline (JEDEC SOIC) Outline (SOIC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

0.020 (0.508) 0.020 (0.508)

0.013 (0.330) 0.013 (0.330)

0.299 (7.60) 0.420 (10.7) 0.299 (7.60) 0.420 (10.7)

0.291 (7.39) 0.393 (9.98) 0.291 (7.39) 0.393 (9.98)
PIN 1 PIN 1

0.050 (1.27) BSC .050 (1.27) BSC

0.394 (10.00) 0.513 (13.0)

0.386 (09.80) 0.105 (2.67) 0.105 (2.67)
0.497 (12.6)
0.092 (2.34) 0.092 (2.34)

0.012 (0.305) 0.012 (0.305)

0.003 (0.076) 0.003 (0.076)

0 0
REF 0.013 (0.330) REF
8 8 0.013 (0.330)
0.009 (0.229) 0.009 (0.229)

0.035 (0.889) 0.035 (0.889)

0.015 (0.381) 0.015 (0.381)

24S, 24-lead, 0.300" Wide, Plastic Gull Wing Small 28S, 28-lead, 0.300" Wide, Plastic Gull Wing Small
Outline (SOIC) Outline (SOIC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

.020(.508)
.013(.330)

.299(7.60) .420(10.7)
.291(7.39) .393(9.98)
PIN 1 ID

.050(1.27) BSC

.616(15.6)
.105(2.67)
.598(15.2)
.092(2.34)

.012(.305)
.003(.076)

.013(.330)
.009(.229)

.050(1.27)
0 REF .015(.381)
8

26 Packages
 Packages

Packaging Information
8S1, 8-lead, 0.150" Wide, Plastic Gull Wing Small 8S2, 8-lead, 0.210" Wide, Plastic Gull Wing Small
Outline (JEDEC SOIC) Outline (EIAJ SOIC)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

.020 (.508) .020 (.508)

.013 (.330) .012 (.305)

.157 (3.99) .244 (6.20) .213 (5.41) .330 (8.38)

.150 (3.81) .228 (5.79) .205 (5.21) .300 (7.62)
PIN 1 PIN 1

.050 (1.27) BSC .050 (1.27) BSC

.196 (4.98) .212 (5.38)

.189 (4.80) .203 (5.16)
.068 (1.73) .080 (2.03)
.053 (1.35) .070 (1.78)

.010 (.254) .013 (.330)

.004 (.102) .004 (.102)

0 0
REF .010 (.254) REF .010 (.254)
8 8
.007 (.203) .007 (.178)

.050 (1.27) .035 (.889)

.016 (.406) .020 (.508)

8T, 8-lead, Plastic Thin Shrink Small Outline 14T, 14-lead, 0.170" Wide, Thin Shrink Small Outline
Package (TSSOP) Package (TSSOP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

PIN 1 INDEX MARK

PIN
1

6.50 (.256)
6.25 (.246)

4.50 (.177) 6.50 (.256)

4.30 (.169) 6.25 (.246)

0.30 (.012)
0.19 (.008)

3.10 (.122)
1.05 (.041) 2.90 (.114)
1.20 (.047) MAX 5.10 (.201)
4.90 (.193) 1.20 (.047) MAX
0.80 (.033)

.65 (.026) BSC 0.15 (.006)

.650 (.026) BSC
0.05 (.002) 0.15 (.006) SEATING
0.30 (.012) 0.05 (.002) PLANE
0.19 (.007)
4.5 (.177)
4.3 (.169)
0 0.20 (.008)
0.20 (.008) REF 0.09 (.004)
8
0.09 (.004)

0.75 (.030)
0.75 (.030)
0.45 (.018)
0 REF 0.45 (.018)
8
*Controlling dimension: millimeters *Controlling dimension: millimeters

27
Packaging Information
20T, 20-lead, 0.170" Wide, Thin Shrink Small Outline 28T, 28-lead, Plastic Thin Small Outline Package
Package (TSSOP) (TSOP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

INDEX MARK
PIN
1
INDEX
MARK
AREA
11.9 (0.469) 13.7 (0.539)
11.7 (0.461) 13.1 (0.516)
4.50 (.177) 6.50 (.256)
4.30 (.169) 6.25 (.246)

0.55 (0.022) 0.27 (0.011)

BSC 0.18 (0.007)

7.15 (0.281)
6.60 (.260) REF
6.40 (.252) 1.20 (.047) MAX
8.10 (0.319) 1.25 (0.049)
7.90 (0.311) 1.05 (0.041)

.650 (.026) BSC

0.15 (.006) SEATING
0.30 (.012) 0.05 (.002) PLANE 0.20 (0.008)
0.19 (.007) 0.10 (0.004)
0
REF 0.20 (0.008)
5
0 0.20 (.008) 0.15 (0.006)
REF 0.09 (.004)
8

0.70 (0.028)
0.75 (.030)
0.45 (.018)
0.30 (0.012)

*Controlling dimension: millimeters *Controlling dimension: millimeters

32T, 32-lead, Plastic Thin Small Outline Package 40T, 40-lead, Plastic Thin Small Outline Package
(TSOP) (TSOP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*
JEDEC OUTLINE MO-142 BD

INDEX
MARK

18.5(.728) 20.2(.795)
18.3(.720) 19.8(.780)

0.50(.020)
0.25(.010)
BSC 7.50(.295) 0.15(.006)
REF

8.20(.323)
7.80(.307) 1.20(.047) MAX

0.15(.006)
0.05(.002)
0 0.20(.008)
5 REF
0.10(.004)

0.70(.028)
0.50(.020)

*Controlling dimension: millimeters *Controlling dimension: millimeters

28 Packages
 Packages

Packaging Information
48T, 48-lead, Plastic Thin Small Outline Package 86T, 86-lead, Plastic Thin Small Outline Package
(TSOP) (TSOP Type II)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters
JEDEC OUTLINE MO-142 DD

10.16
BSC
11.76
BSC

0.30
0.17

22.22
BSC
1.20 MAX

1.15
0.95
0.50
0.05
BSC
MIN

0-8˚ 0.127 TYP

0.50

*Controlling dimension: millimeters

28U, 28-pin, Ceramic Pin Grid Array (PGA) 30U, 30-pin, Ceramic Pin Grid Array (PGA)
Dimensions in Inches and (Millimeters) Dimensions in Inches and (Millimeters)

29
Packaging Information
48U, 48-ball, Micro Ball Grid Array Package (µBGA) 180U, 180-pin, Ceramic Pin Grid Array (PGA)
Dimensions in Inches and (Millimeters)

8.6
8.4
3.75

F E D C B A

4
7.0 5.25
6.8 5

0.75 TYP 0.30 DIA TYP 0.15 MIN.

NON-ACCUMULATIVE 1.00
0.85
0.70

68UW, 68-pin, Ceramic Pin Grid Array (PGA) 32V, 32-lead, Plastic Thin Small Outline Package
Dimensions in Inches and (Millimeters) (TSOP)
Dimensions in Millimeters and (Inches)*

INDEX
MARK

12.5(.492) 14.2(.559)
12.3(.484) 13.8(.543)

0.50(.020)
0.25(.010)
BSC 7.50(.295) 0.15(.006)
REF

8.10(.319)
7.90(.311) 1.20(.047) MAX

0.15(.006)
0.05(.002)
0 0.20(.008)
5 REF
0.10(.004)

0.70(.028)
0.50(.020)

*Controlling dimension: millimeters

30 Packages
 Packages

Packaging Information
40V, 40-lead, Plastic Thin Small Outline Package 20X, 20-lead, 4.4 mm Wide, Plastic Thin Shrink
(TSOP) Small Outline (TSSOP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*
JEDEC OUTLINE MO-142 CA

0.30(0.012)
0.18(0.007)

4.48(.176) 6.50(.256)
4.30(.169) 6.25(.246)
PIN 1 ID

0.65(.0256) BSC

6.60(.260)
6.40(.252) 1.10(0.043) MAX

0.15(.006)
0.05(.002)

0.18(.007)
0.09(.003)

0.70(.028)
0 REF 0.50(.020)
8
*Controlling dimension: millimeters *Controlling dimension: millimeters

24X, 24-lead, 4.4 mm Wide, Plastic Thin Shrink 20Y, 20-lead, 5.3 mm Wide, Plastic Shrink Small
Small Outline (TSSOP) Outline (SSOP)
Dimensions in Millimeters and (Inches)* Dimensions in Millimeters and (Inches)*

0.38 (.015)
0.25 (.010)

5.38 (.212) 7.90 (.311)

5.20 (.205) 7.65 (.301)
PIN 1 ID

0.65 (.0256) BSC

7.33 (.289)
2.67 (.105)
7.07 (.278)
2.34 (.092)

0.21 (.008)
0.05 (.002)

0.20 (.008)
0.09 (.004)

0.95 (.037)
0 REF 0.63 (.025)
8

31