0% found this document useful (0 votes)
199 views6 pages

DIY Outdoor Garden Furniture

This document provides instructions for making DIY outdoor garden furniture out of reclaimed wood. It describes preparing wood planks by drilling mortises and fitting tenons to join sections together. Steps include drilling holes for the tenons, rounding tenon corners, and joining front and side sections. A storage coffee table is also constructed with lifting slats and a lid with holding slats. Additional related DIY furniture projects are listed.

Uploaded by

STEVE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
199 views6 pages

DIY Outdoor Garden Furniture

This document provides instructions for making DIY outdoor garden furniture out of reclaimed wood. It describes preparing wood planks by drilling mortises and fitting tenons to join sections together. Steps include drilling holes for the tenons, rounding tenon corners, and joining front and side sections. A storage coffee table is also constructed with lifting slats and a lid with holding slats. Additional related DIY furniture projects are listed.

Uploaded by

STEVE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Food Living Outside Play Technology Workshop

DIY outdoor garden furniture


by dezine on February 22, 2014

Table of Contents

DIY outdoor garden furniture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Intro: DIY outdoor garden furniture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Step 1: Prepare the planks for joining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Step 2: Join the sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Step 3: Storage coffee table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

http://www.instructables.com/id/DIY-outdoor-garden-furniture/
Intro: DIY outdoor garden furniture
With easy access to tools and materials for DIY enthusiasts, making outdoor garden furniture has become a growing trend that many like to take on as an alternative and
affordable option for outdoor furniture.

With a few basic power tools and plan, any DIY enthusiast can make unique outdoor garden frniture that fits in with their lifestyle and budget. The Cavello patio furniture
shown here is a great outdoor furniture project to start with and can be made using reclaimed wood or locally available soft or hardwoods.

I chose this outdoor garden furniture because of its simple design and smooth lines. Despite the simplicity, the furniture has modern appeal and can be stained or
finished as you prefer. It is also an affordable project if you use reclaimed wood, meranti or pine. If you prefer a natural light, or blonde finish, similar to that shown here,
after sanding all the pieces apply liming wax on a regular basis. Use this tip to make your own liming wax.

http://www.instructables.com/id/DIY-outdoor-garden-furniture/
Step 1: Prepare the planks for joining
If you look closely as how this furniture is assembled, it consists of planks approximately 100mm wide and cut to length. There are a couple of methods that could be
used for joining the planks together, dowels being one, but I have opted to show a method where a mortise is drilled out.

1. The method of drilling out a mortise and fitting a a tenon-style joint will create a strong joint between the sections.
I think that 10mm dowels will work just as well, if you add more along the length.

2. The tenon used for demonstration was a 10 x 44mm strip of PAR pine. To accommodate for this you will need to use a 10mm wood bit.Although I have marked off the
drill bit at 50mm, a depth of 30mm should be more than sufficient.

3. Use the 10mm wood bit to bore out holes along the cutting area to a depth of 30mm. Space the drilling holes as close together as possible without overlapping, as this
will cause the drill bit to slip away from the hole.

4. Since the width of the bored hole is only 10mm, using a wood chisel isn't practical. A Dremel MultiTool with small sanding ring works like a dream to clean out the
mortise.The reason I modified the depth from 50mm to 30mm is to allow you to reach the bottom of the morise with a Dremel sanding ring.

5. On the 10 x 44mm PAR pine I used a sander to round off the corners. Cut the 10 x 44mm PAR pine to a length of 80mm. This allows for 30mm mounted in the lower
and upper planks and 20mm in the gap between.

http://www.instructables.com/id/DIY-outdoor-garden-furniture/
Step 2: Join the sections
6. The front seat section consists of two planks joined together as explained above.

7. Both sides sections are joined in the same way. The bottom two slats are screwed onto the back of the front seat sections.

8. On the back section, the slats are screwed into the sides.

9. For mounting seat slats, add 32 x 32mm battens at 20mm below the top of the second slat - on the front, back and sides. Before

http://www.instructables.com/id/DIY-outdoor-garden-furniture/
Step 3: Storage coffee table
The storage coffee table is made with side panels made in the same way as the outdoor furniture, but the base has slats that lifts the coffee table off the floor, and a slats
on the lid to hold it in place.

Furniture designed by cavello.

See more easy DIY furniture projects at: http://www.home-dzine.co.za/garden/garden-diy-fur...

Related Instructables

HomeMade
Protect Your Modern DIY Log
Make a drop- Make a vintage Outdoor Wood
leaf bureau / Rainbow garden display cabinet DIY Outdoor Lounger by
Furniture by
home office by furniture or island by Wood Bench by homemademodern
spottedwalker
dezine (Photos) by dezine EYSpace
imakeit

http://www.instructables.com/id/DIY-outdoor-garden-furniture/
Advertisements

Comments
3 comments Add Comment

hunter999 says: Feb 23, 2014. 7:25 AM REPLY


Wow! Nice job :-)

Muhaiminah Faiz says: Feb 23, 2014. 7:11 AM REPLY


Wow! they look awesome!

Tarun Upadhyaya says: Feb 23, 2014. 1:49 AM REPLY


Thats just so cool :)

http://www.instructables.com/id/DIY-outdoor-garden-furniture/

You might also like