Technical Data Sheet
Previous Name: Shell Vitrea M
• Reliable Protection
Shell Morlina S1 B 460 • Industrial Application
• Water Shedding
Industrial Bearing & Circulating Oils
Shell Morlina S1 B oils are high performance oils designed to provide excellent protection for most industrial bearing
and circulating oil system applications, particularly those processes where water shedding (demulsification) is important
for the life of the equipment. Meets the most basic requirements of the Morgan standard for common bearing oils.
Performance, Features & Benefits · Oil lubricated bearings
· Good oil life – Maintenance saving Suitable for most plain and rolling element bearings in general
industrial applications.
Shell Morlina S1 B oils use carefully chosen components to
help provide consistent performance and protection · Roll-neck bearings
throughout the maintenance interval. · Enclosed industrial gear systems
· Reliable wear & corrosion protection Low or moderately loaded enclosed gears where EP
performance is not required.
Shell Morlina S1 B oils help prolong the life of bearings and
circulating systems through:
Specifications, Approvals & Recommendations
- Good water separation characteristics that help ensure that
critical oil films are retained between highly loaded parts.
· Morgan MORGOIL® Lubricant Specification (New Oil Rev. 1.1)
(MORGOIL is a registered trademark of the Morgan
- Good air release characteristics to minimize cavitation and Construction Company)
associated damage to circulating pumps.
- Helps protect against corrosion, even in the presence of
· DIN 51517-1 – Oil Type C
For a full listing of equipment approvals and recommendations,
water.
please consult your local Shell Technical Helpdesk.
· Maintaining system efficiency
Compatibility & Miscibility
Shell Morlina S1 B oils are blended with high quality, solvent
refined base oils that promote good water separation and air · Paint Compatibility
release to ensure the efficient lubrication of the machines and Shell Morlina S1 B oils are compatible with seal materials and
systems. paints normally specified for use with mineral oils.
Main Applications
· Machine circulation systems
Typical Physical Characteristics
Properties Method Morlina S1 B 460
ISO Viscosity Grade ISO 3448 460
Kinematic Viscosity @400C mm2/s ASTM D445 460
Kinematic Viscosity @100 C 0 2
mm /s ASTM D445 31
Density 0
@15 C kg/m 3 ISO 12185 896
Viscosity Index ISO 2909 95
Page 1 of 4 Shell Morlina S1 B 460, v 3.1 03.06.2014.13.40
Properties Method Morlina S1 B 460
Flash Point (COC) 0
C ISO 2592 260
Pour Point 0
C ISO 3016 -6
Rust, Distilled Water ASTM D665A Pass
Emulsion Test, Minutes @820C ASTM D1401 30
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 4 Shell Morlina S1 B 460, v 3.1 03.06.2014.13.40
Page 3 of 4 Shell Morlina S1 B 460, v 3.1 03.06.2014.13.40
Page 4 of 4 Shell Morlina S1 B 460, v 3.1 03.06.2014.13.40
