Project name: CONSTRUCTION OF SATELLITE MONITORING CENTER - WADI AL MARKHIYA Doc. no.

: xxxxxxxxxxxxx
Project Number: BP 2020 C 018 S Rev.: XXXXXXX
Date :13-12-2022
Inspection and Test Plan for Installation of Surveillance Equipment’s.
* Inspection & Test code
(R, S, W, H)
Control Records to

Third Party
Sl. Acceptance Responsible

Consultant
Contractor
Description of Activity Procedure/ Spec. / Frequency be

Sub-cont.
no Criteria person

Ashghal
codes/ standard generated

1 General

1.1 Verify the work permit are obtained  Project MEP

from the concerned authorities prior specification Prior to start Compliance to Coordinator, PTW (permit
H H R R N/A
to commencement of any activity  QCS 2014 the activity. project requirement. HSE, SE to work)

Approval of Method statement, ITP,  Project MEP

1.2 Material submittals, shop drawings specification Prior to start Compliance to Coordinator, Approved
H H R R N/A
etc.  QCS 2014 the activity project requirement. HSE, QC copies

1.3 Check for safety of the work area.  Ashghal Prior to start Compliance to MEP
Safety the activity project requirement Coordinator, H H S S N/A Start cards
regulations SE, HSE, QC

1.4 Calibration certificate of testing and  Project spec Every

measuring instrument. measuring Compliance to
equipment and project requirement Calibration
SE, QC H R R R N/A
testing certificate
equipment

Legend: R- Review
S- Surveillance inspection
W- Witness, raising of Inspection Request is not mandatory which shall be at the discretion of consultant/ Ashghal
H- Hold Point, raising of Inspection Request is mandatory

Page 1 of 6
 Project name: CONSTRUCTION OF SATELLITE MONITORING CENTER - WADI AL MARKHIYA Doc. no.: xxxxxxxxxxxxx
Project Number: BP 2020 C 018 S Rev.: XXXXXXX
Date :13-12-2022
Inspection and Test Plan for Installation of Surveillance Equipment’s.
* Inspection & Test code
(R, S, W, H)
Control Records to

Third Party
Sl. Acceptance Responsible

Consultant
Contractor
Description of Activity Procedure/ Spec. / Frequency be

Sub-cont.
no Criteria person

Ashghal
codes/ standard generated

2.0 Material delivery storage and Handling

2.1 Cat6A cables delivery storage and  Project 1. In accordance

handling. specification with project
 Approved Up on delivery specification, shop
IP Indoor and Outdoor cameras material at site drawing, and
delivery and storage submission. method statement.
SE, QC H S S S N/A
 QCS 2014 2. Manufacture
recommendation.

2.2 Cat6A cables Material inspection  Project 1. In accordance

specification Up on delivery with project
Surveillance Equipment’s  Approved at site specification, shop Approved MIR
Inspection. material drawing, and xxxxxx, test
method statement. SE, QC H H H S N/A
submission. certificate,
 QCS 2014 2. Manufacture delivery note,
recommendation.

Legend: R- Review
S- Surveillance inspection
W- Witness, raising of Inspection Request is not mandatory which shall be at the discretion of consultant/ Ashghal
H- Hold Point, raising of Inspection Request is mandatory

Page 2 of 6
 Project name: CONSTRUCTION OF SATELLITE MONITORING CENTER - WADI AL MARKHIYA Doc. no.: xxxxxxxxxxxxx
Project Number: BP 2020 C 018 S Rev.: XXXXXXX
Date :13-12-2022
Inspection and Test Plan for Installation of Surveillance Equipment’s.
* Inspection & Test code
(R, S, W, H)
Control Records to

Third Party
Sl. Acceptance Responsible

Consultant
Contractor
Description of Activity Procedure/ Spec. / Frequency be

Sub-cont.
no Criteria person

Ashghal
codes/ standard generated

3.0 Cat6A Structured Cabling Installation

3.1 Obtaining Civil and mechanical  Project 1. In accordance

clearance before installation specification with approved
 QCS 2014 method statement,
Visual shop drawing and
mentioned project checkllist-
inspection H
specification. SE, QC H S S N/A xxxxxx
for each item
2.As per
Manufacture
recommendation

3.2  Project 1. In accordance

specification with approved
 QCS 2014 method statement,
Approved IR
Visual shop drawing and
xxxxxxx
inspection mentioned project SE, QC H H W S N/A
checkllist-
for each item specification.
xxxxxx
2.As per
Manufacture
recommendation
Legend: R- Review
S- Surveillance inspection
W- Witness, raising of Inspection Request is not mandatory which shall be at the discretion of consultant/ Ashghal
H- Hold Point, raising of Inspection Request is mandatory

Page 3 of 6
 Project name: CONSTRUCTION OF SATELLITE MONITORING CENTER - WADI AL MARKHIYA Doc. no.: xxxxxxxxxxxxx
Project Number: BP 2020 C 018 S Rev.: XXXXXXX
Date :13-12-2022
Inspection and Test Plan for Installation of Surveillance Equipment’s.
* Inspection & Test code
(R, S, W, H)
Control Records to

Third Party
Sl. Acceptance Responsible

Consultant
Contractor
Description of Activity Procedure/ Spec. / Frequency be

Sub-cont.
no Criteria person

Ashghal
codes/ standard generated

3.3  Project 1. In accordance

1.Installation of CCTV specification with approved
system rack and its  QCS 2014 method statement,
components shop drawing and
project specification.
2. Installation of false 2.As per
ceiling/wall mounted camera Manufacture
3.Installation of roof mounted recommendation
camera
Visual
4.Identification & termination Approved IR
inspection SE, QC H H W S N/A
xxxxxxx
of all wires/cable for each item
5.Link cable connections
between all IDF AND MDF
Rooms.

Legend: R- Review
S- Surveillance inspection
W- Witness, raising of Inspection Request is not mandatory which shall be at the discretion of consultant/ Ashghal
H- Hold Point, raising of Inspection Request is mandatory

Page 4 of 6
 Project name: CONSTRUCTION OF SATELLITE MONITORING CENTER - WADI AL MARKHIYA Doc. no.: xxxxxxxxxxxxx
Project Number: BP 2020 C 018 S Rev.: XXXXXXX
Date :13-12-2022
Inspection and Test Plan for Installation of Surveillance Equipment’s.
* Inspection & Test code
(R, S, W, H)
Control Records to

Third Party
Sl. Acceptance Responsible

Consultant
Contractor
Description of Activity Procedure/ Spec. / Frequency be

Sub-cont.
no Criteria person

Ashghal
codes/ standard generated

3.7 Mock Up installation of Cat6A Cable  Project 1. In accordance

and Installation of cameras specification with approved
 QCS 2014 method statement,
Visual shop drawing and Approved IR
inspection mentioned project SE, QC H H H S N/A xxxxxx
for each item specification. checkllist-
2.As per xxxxxx
Manufacture
recommendation
3.8 Complete Surveillance equipment’s  Project 1. In accordance
installation specification with approved
 QCS 2014 method statement,
Visual shop drawing and
mentioned project Approved IR
inspection for SE, QC H H H S N/A
specification. xxxxxx
each item
2.As per checkllist-
Manufacture xxxxx
recommendation

Prepared by (QA/QC Eng.) XXXXXX Reviewed by (QA/QC Eng.): XXXXX Approved by (PM): XXXXXXX
Legend: R- Review
S- Surveillance inspection
W- Witness, raising of Inspection Request is not mandatory which shall be at the discretion of consultant/ Ashghal
H- Hold Point, raising of Inspection Request is mandatory

Page 5 of 6
Project name: CONSTRUCTION OF SATELLITE MONITORING CENTER - WADI AL MARKHIYA Doc. no.: xxxxxxxxxxxxx
Project Number: BP 2020 C 018 S Rev.: XXXXXXX
Date :13-12-2022
Inspection and Test Plan for Installation of Surveillance Equipment’s.
* Inspection & Test code
(R, S, W, H)
Control Records to

Third Party
Sl. Acceptance Responsible

Consultant
Contractor
Description of Activity Procedure/ Spec. / Frequency be

Sub-cont.
no Criteria person

Ashghal
codes/ standard generated

Legend: R- Review
S- Surveillance inspection
W- Witness, raising of Inspection Request is not mandatory which shall be at the discretion of consultant/ Ashghal
H- Hold Point, raising of Inspection Request is mandatory

Page 6 of 6