ALUMINUM FLAT ROLLED en | Product &4 YIEH CORP. Aluminum Sheet and Plate Aluminum Strip and Coil Aluminum Foil Aluminum Tread or Embossed Sheet SS Aluminum Disc Coated Aluminum Sheet and CoilPROFESSIO| RELIABLE EFFICIENT > www.yieh.com RNAV RLU Les At ero ualo1 on) EDUCATION + [Shou University + E:Da International Elementary’ + FShou Kindergarten i Yieh Hsing E UNITED GROUP HEALTH CARE ESTATE & + E-Da Hospital ENTERTAINMENT BUSINESS + E-Da World or rornavoral -Da Development ABOUT YIEH CORP. Yieh Corp. belongs to E United Group, which is the largest private metal making group in Taiwan, accumulated more than 40 years of experience in metal industry. As one of most important sales outlet of E United Group, Yieh Corp successful- ly integrates internal and external metal resource in Taiwan and Chinese main- land to provide total solution for client's various needs. Hereby we recommend one of our most popular metal products, aluminum flat rolled product. We not only provide sheet, plate, coil, strip, foil and disc with quality assurance, but also optimize complete supply chain to facilitate customer time saving and cost effectiveness.This valuable metal possesses the whiteness of silver, the indestructibility of gold, the tenacity of iron, the fusibility of copper, the lightness of glass. It is easily wrought, is very widely distributed, forming the base of most rocks is three times lighter than iron, and seems to have been created for express purpose of furnishing us with the material for our projectile.” - Jules Vernes, “From the Earth to the Moon”, 186503 NOTE/ Chinese Standard is able to cover both ASTM and EN standard, unless otherwise specified, Chinese GB Standard will be appliedALLOY DESIGNATIONS Comparison of alloy designations for aluminum flat products 1050 10504, ENAW-1050A 1060 1060 “Ge Series 1100 1100 1200 EN AW-1200 1145 1145 1235 1235 ENAW-1235 2014 2014 ENAW-2014 2017 2x Series: ENAW-2017A, 2024 2024 ENAW-2024 3003 3003 EN AW-3003 3004 3004 ENAW-3004 xxx Series 3005 3005 EN AW-3005 3105 3105 EN AW-3105 5005 5005 EN AW-5005 052 5052 EN AW-5052 5xxx Series 8754 ENAW-5754 5083 5083 EN AW-5083 6061 6061 EN AW-6061 Gxxx Series 6082 EN AW-6082 ‘Tx Series 7075 7075 ENAW-7075 8011 xxx Series B01tA ENAW-8011A 8079 EN AW-807905: TEMPER DESIGNATIONS As fabricated (no mechanical property limits specified) Annealed Strain Hardened, 1/4 Hard Strain Hardened, 1/2 Hard Strain Hardened, 3/4 Hard Strain Hardened, 4/4 Hard (fully hardened) Strain Hardened, Extra Hard Strain Hardened and Partially Annealed, 1/4 Hard Strain Hardened and Partially Annealed, 1/2 Hard Strain Hardened and Partially Annealed, 3/4 Hard Strain Hardened and Partially Annealed, 4/4 Hard (fully hardened) Strain Hardened and stabilized, 1/4 Hard Strain Hardened and stabilized, 1/2 Hard Strain Hardened and stabilized, 3/4 Hard Strain Hardened and stabilized, 4/4 Hard (fully hardened) ‘Annealed and slightly strain hardened (less than H11) Slightly strain harden from working at an elevated temperature or from limited amount of cold work ‘Applies to alloys in the Sxxx series with a magnesium content of 3% or more, slightly strain harden at last operation, exfoliation and intergranular corrosion resistance are specified. ‘Applies to alloys in the Sxxx series with a magnesium content of 3% or more, strain hardened and stabilized at last operation, exfoliation and intergranular corrosion resistance are specified. Strain Hardened and painted or lacquered, 1/4 Hard Strain Hardened and painted or lacquered, 1/2 Hard Strain Hardened and painted or lacquered, 3/4 Hard Strain Hardened and painted or lacquered, 4/4 Hard (Fully hardened) Solution heat-treated, cold worked, stress relived by stretching, and naturally aged Solution heat-treated and naturally aged Solution heat-treated, stress relived by stretching, and naturally aged Solution heat-treated and then arti ‘ally aged Solution heat-treated, stress relived by stretching, and artificially agedALUMINUM AND ALUMINUM ALLOY SHEET AND PLATE Standard Specification/ Gert 3880, ASTM 6209, EN 485 Alloy and Temper: 1050A, 1060, 3xxx: 3003, 3004, 3005, 3105 | ©, 111, H112, H22, H24, H26, H28, H32, H34, ) H112, H12, H14, H16, H18, H22, H24, H26 Sx: 5005, $052, 5754, 5083 136, H38 Gxxx: 6061, 6082 | 74,7454, T6, 7654 2xux: 2014, 2017, 2024 | ‘7361, T451 5 ‘075 | ‘651 > AVAILABLE SIZE RANGE Dimension Range Thickness: 0.5 ~ 6.0mm for sheet, 6.0~ 120mm for plate Width: 900 ~ 2,200mm Length: 2,000 ~ 10,000mm. > STANDARD WIDTH AND LENGTH 1000x2000mm, 1250x2500mm, 1500x3000mm, 1219x2438mm, 1524x3048mm > SURFACE FINISH Mill Finish, unless otherwise specified > SURFACE PROTECTION Paper interleaved, PE/PVC filming (if specified)ALUMINUM AND ALUMINUM ALLOY STRIP AND COIL Standard Specification/ Gs/T 3880, ASTM B209, EN 485 Alloy and Temper: ry ne ‘Jove 1050, 1050A, 1060, 1100 0, F, H12, H14, H16, H18, H22, H24, 3xxx: 3003, 3004, 3005, 3105 H26, 128. ©, F, H22, H24, H26, H28, H32, H34, Sy00c 5005, 5052, 5754, 5083 6 H38 > AVAILABLE SIZE RANGE Dimension Range Thickness: 0.2~ 4.0mm Width: 200 ~ 2,200mm > STANDARD WIDTH 1000mm, 1250mm, 1500mm, 1219mm, 1524mm, > SURFACE FINISH Mill Finish, unless otherwise specified > SURFACE PROTECTION Without paper interleaved for all aluminum coils With PE/PVC filming on main side (if specified)ALUMINUM AND ALUMINUM ALLOY FOIL Standard Specification/ Gpvt 3198, EN 546 Alloy and Tempe Ay sel ‘Dow: 1050, 1050A, 1060, 1100 45, 1235,4200 , H14, H18, H18, H19, H22, H24, H26 3xxx: 3003 8xxx: 8011, 8011A,8079 O, H18, H19, H22, H24, H26 > AVAILABLE SIZE RANGE Dimension Range Thickness: 0.006 ~ 0.2mm Width 200 ~ 1,800mm > SURFACE CONDITION One side bright, the other side matte (for double rolled) Two sides bright (for single rolled) > SURFACE TREATMENT Lubrication, Lamination, Coating > CORE TYPE AND SIZE Type: Aluminum, Steel, Fiber Core ID: 75mm, 76.2mm, 150mm, 152.4mm, 300mm, 400mm :ALUMINUM AND ALUMINUM ALLOY TREAD SHEET Standard Specification/ Gevt 3618, Base material conforms to GB/T 3880 Alloy and Temper: og Ai eens $566011050, 1060; 100: H114 fabricated from Temper O 0,H114,H194 44494 fabricated from Temper H18 + Temper 12, H14, H22, H24, H32 and H34, which are appied'o base materia, are 0, i114 provided as per client's request and mutially agreed Sr00c 3003, 3105 ‘Sxxx: 5052, 5754 > AVAILABLE SIZE RANGE Range 1.5-4.5mm. 1,000~1,600mm ——2,000~4,000mm > SURFACE FINISH > PATTERN TYPE Bright Finish, Mill Finish ‘Small Five Bar, Big Five Bar, Diamond > RAISED PATTERN Pattern Height 1.0mm, +/-0.4mm 1.0mm, 4/-0.4mm 1.0mm, +/-0.4mm. Pattern Length 35mm, +/-3.0mm 45mm, +/-3.0mm 33mm, +/-2.0mm. > SURFACE PROTECTION With paper interleaved ‘Small Five Bar Big Five Bar 09ALUMINUM AND ALUMINUM ALLOY EMBOSSED SHEET Standard Specification/ Base material conforms to GB/T 3880 Alloy and Temper: xxx: 1050, 1060, 1100 Sxxx: 3003 0, H12, H14, H22, H24 > AVAILABLE SIZE RANGE Dimension Range Thickness: 0.3~1.5mm for coil 0.5~1.5mm for sheet Width: 1,000~1250mm. Length: Coiled, or 2,000~4,000mm > THE EMBOSSED PATTERN SHALL BE USUALLY CONFIRMED BY CUSTOMER WHEN PLACING ORDERWith PE/PVC coating on main side (if specified) ALUMINUM AND ALUMINUM ALLOY DISC Standard Specification/ GBT 3880 Alloy and Temp y a ‘xxx: 1050, 1060, 1070, 1100 0, H14, H24 ‘xxx: 3003 O, H12, H14, H22, H24 xxx: 5052 0, H22, H24, H32, H34 6xxx: 6061 0,74 > AVAILABLE SIZE RANGE Dimension Range Thickness: 0.5 ~ 4.0mm Diameter: 150 ~ 1,000mm “Note/ the diameter to be a multiple of Smm due to the limit of die > DIAMETER TOLERANCE Nominal Diameter Tolerance Multiple of Smm +/- 0.5mm Non-multiple of 5mm —+/- 3.0mm > SURFACE PROTECTION >COATED ALUMINUM AND ALUMINUM ALLOY COIL AND SHEET Standard Specification/ YS/T 431, GB/T17748, Mill's Standard, Mutually Agreed Standard Based material conforms to GB/T 3880 Alloy and Temper: og cours Rene ‘txxx: 1050, 1100 + Tempor H12, H14, H16, H18, H22, H2d, H32 and H84, for xxx: 3003, 3105 H42, Had, H46, H48 base material, are provided 2s per clint’ request and Sxxx: 5005, 5052 mutually agreed > AVAILABLE SIZE RANGE Dimension Range Thickness: 0.25 ~ 1.8mm Diameter: 500 ~ 1,550mm Length: Coiled, or 2,000~4,000mm > COATING Paint: PE (Polyester), PVDF Thickness: Front > 18 microns (PE), >24 microns (PVDF) Back > 8~10 microns (PE or EP) Color: RAL colors or by confirmed sample > GLoss 20% to 80%, depends on client's requirement > SURFACE PROTECTION With PE/PVC film on main side (if specified)TOLERANCE CONTROL © Thickness Tolerances for Cold Rolled Sheet, Coil, Strip and Disc Specified Tea =<1000mm — >1000~1250mm >1250~1600mm >1600~2000mm 0.2-0.4mm, +1. 0.02mm +1 0.03mm 4/-0.03mm_ % >0.4-0.6mm +1-0.03mm +1 0.04mm +/-0.04mm_ +/-0.04mm, >0.8-0.8mm. 41. 0.03mm +1-0.05mm +/- 0.05mm_ +1. 0.07mm >0.8-1.0mm 41-0.04mm +h 0.06mm + 0.07mm_ +1. 0.08mm >1.0-1.2mm, +h 0.04mm +1 0.07mm +) 0.07mm_ +1: 0.09mm: >1.2-1.5mm, 4#1- 0.05mm 41-0.08mm +/-0,08mm_ 41 0.14mm_ >1.5-2.0mm +1. 0.06mm +h 0.09mm +/-0.09mm_ +1 0.12mm, >2.0-3.0mm 4s-0.07mm #l- 0.08mm +¥/-0.09mm, +1-0.15mm, >3.0-4.0mm 41-0.10mm +4 0.15mm + 0.16mm_ +1-0.18mm, >4.0-6.0mm +1-0.18mm +h 0.2mm +/-0.22mm_ +/-0.25mm, >8.0-8.0mm 41. 0.24mm +1-0.28mm +/-0.28mm_ +/-0.30mm ~ Thickness Tolerances for Hot Rolled Plate >1000~1 250mm, >1250~1600mm >1600~2000mm 6.0-8.0mm H035mm = 040mm = H- 040mm >8.0-10.0mm + 0.45mm_ +f 0.50mm +/- 0.50mm_ >10,0~15.0mm +1 0.50mm += 0.60mm 4/-0.65mm >45.0-20.0mm #1: 0.60mm “1: 0.70mm 44: 0.75mm >20,0-20.0mm +f: 0.65mm “Hs 0.75mm 4 0.85mm >30,0~40.0mm +1: 0.75mm + 085mm 44 4.00mm >40,0-60.0mm #1-0.90mm +H 4.0mm 44 4.40mm >50.0-60.0mm “He 1.40mm “Hs 120mm ‘ie 1.40mm >60,0-80.0mm f= 1.40mm +H 1.50mm 444.70 >80,0-100.0mm fe 41.70mm += 1.80mm 4 1.90mm >100.0-150 0mm +f 2.40mm +H: 220mm 4/-2.50mm » Thickness Tolerances for Foil 0.006 ~ 0.009mm >0.009 ~ 0.200mm~ Width Tolerances for Foil, Strip and Coil eae men 300mm >300~500mm | >500-1250mm _>1250~1650mm _>1650-2000mm 0.006~0.200mm +/-1.0mm —+/-1.0mm +/+ 1.0mm +. 2.0mm. +/- 2.0mm, >0.20-0.60mm +0.4mm + 0.6mm. +4.5mm, +2.5mm + 3.0mm >0.60~1.00mm — +0.5mm + 1.0mm. +4.5mm, + 2.5mm + 3.0mm >1,00-2.00mm — +0.7mm + 1.2mm. + 2.0mm, +2.5mm + 3.0mm >2,004.00mm + 1.0mm + 1.5mm. +2.0mm, + 2.5mm + 4.0mm ered Veena i Se ee ie CO) Clr r a) >0.20-0.50mm By agreement By agreement By agreement >0.50~3.0mm_ 0.4% 05% 0.5% >3.0~6.0mm 0.3% 04% 0.4% >6.0-50mm 0.2% 04% | 0.3% Note: L+Length of the sheet or plate, W=width of the sheet or plate, d=deviation from flatness, Isiength of chord ~ Squareness Tolerances for Sheet and Plate width15 DENSITY & THEORETICAL WEIGHT Density of Aluminum and Aluminum Alloy fospa | 2.708 2014 2,800 3105 2,720 6082 2,700 1080 2,705 2017 2,790 5005 2700 7075 2,610 1400 2,710 2024 2,780 5052 2680 | 8011 2710 1145, 2,700 3003) 2,730 5083 2660 | goa | 2,710 1200 2,700 3004 2,720 | 5754 2670 | 8079 2,720 1235 2,705 3005, 2,730 | 6061 2,700 THEORETICAL WEIGHT » Sheet and Plate (Plain) Theoretical Weight of Pcs = Thickness x Width x Length x Density = Kgs/pes Theoretical Weight per pcs for standard size: 1.0 x 1000 x 2000mm 5.400 kgs 4.0 x 1250 x 2500mm 8.438 kgs 1.0 x 1500 x 3000mm 12.150 kgs 1.0 X 1219 x 2438mm 8.024 kgs 1.0 x 1524 x 3048mm 12.542 kgs “Note: Based on density of 2700 kg/m? > Disc Ena Theoretical Weight of Pes = Thickness x 3.14 x (Diameter/2)? x Density = Kgs/pos Alloy 1050, Thickness 3.0mm x Diameter 500mm Weight/pcs = 3.0 x 10-3 x 3.14 x (0.5/2)? x 2705 = 1.593 kgs/pesPACKAGE DIMENSION For Reference Only Estimated height of pallet and outside diameter of coil Standard Size 1000 x 2000 1250 x 2500 1900 x 3000 1219 x 2438 1524 x 3048, Pallet Weight ko 1,000 1,800 2,000 2,500 4,000 1,800 2,000 2,500 1,000 1,800 2,000 2,500 4,000 1,800 2,000 2,500 4,000 1,800 2,000 2,500 Estimated Pcs Estimated Pallet Height for any thickness 335mm 428mm 520mm 613mm 269mm, 328mm 387mm 448mm, 232mm 273mm, 315mm 356mm 275mm, 337mm 399mm 462mm, 230mm 270mm, 309mm 349mm Standard Size 1000 xc 1250 xC. 1500 xc. 1219xC 1524 xc 4,000 5,000 2.500 3,000 4,000 5,000 2,500 3,000 4,000 5,000 2,500 3,000 4,000 5,000 2,500 3,000 4,000 5,000 for any thicknass 4,.240mm, 4,340mm_ 4,520mm 1,680mm 4,135 1,220mm 4.375mm 4,620mm 1,055mm 4,135mm 4,275 4,400mmn 4,145mm 4,280 1,380mm 4,835mm 4,050 4.425mm 4.265mm 4,380 16EYE TO SIDE Coll Weight 2.0-8.0MT To be recommended when the coil width is less than 1200mm to maximize container loading EYE TO SKY Coil Weight | 2.0~3.0MIT To be recommended when the coil width is over 1200mm to maximize container loading and coil weight fo be about 2.5MT 7Pallet Weight’ 1.0-3.0MT Pallet weight of 2.0 to 2.5MT is to maximize container loading LABEL AND SHIPPING MARK BAYIEN CORE. EYiEn.cOm19 APPLICATION Aluminum & its alloy are widely used in mare than 90% of the industries in the world, especially in transportation, construction, packaging, appliances and equipment. ALUMINUM APPLICATION Transportation Packaging & Vessel Others Machine & Equipment Electronics & Appliances Durable Goods Building & Construction TRANSPORTATION BUILDING & CONSTRUCTION ete] Decoration, Celling Danas roastat Ce eels DURABLE GOODS Ce manu Pe ert amor eee ia Traffic Sign, Nameplate Coy t) an aan DE erect iment) CS 20ISO CERTIFICATION sira ‘CERTIFICATION PAGO RUC ic QUALITY MANAGEMENT CERTIFICATE PACS UC WesCo Cm CUE CE CERTIFICATION sate of Compliance WA Cacao id Ret un cue Wer) ese) Fi 4 J ‘Kio cs : ; 5 cu a a i F Bg ec : ; i 3 : 2 f 5; A Pa]ORDERING INFORMATION > Required Information in firm enquiry Lita) 4.Product Name" MTTUr Lely Aluminum Sheet, Aluminum Foil et Aluminum Sheet 2.Standard Specification’ GB/T3880, ASTM B209, EN 485 GB/T 3880 3.Alloy” 1050, 1050A,3003,5052, 6061 1050 4.Temper* Hi4, H24, H32, T6, T6541 Ht4 5.Dimension* Thickness x Width x Length 0.5 x 1249 x 2438mm 6.Order Quantity” 7.Surface Finish (it any) Specific Quantity per each size Bright Finish, Mill Finish Coating (paint, color, thickness) 20MT Mill Finish 8.Surface Protection (if'any) 9.Coil ID (if specified) 10.Coil / Pallet Weight {if specified) 11.Application 12,0ther Requirements any) Paper interleaved, PE coating on main side 405mm, 505mm 3.0~5.0MT/coll, 1.5~2.5MT/pallet Catering Equipment, Curtain Wall Chemical Composition, Mechanical Properties, Dimensional Tolerance With Paper Interleaved NIA 2.0MTipalllet Max. Catering Equipment Thickness tolerance on light side Y Tho items with red star are required to be clatified for any enquiry. Y Other specifications unlisted in our catalogue are available up to request, or will be provided by agreement. > Minimum Order Quantity (MOQ) 5MT per size for popular items TMT to 10MT per size for special dimensions 2MT per size for disc NOTE/ The order with quantity less than MOQ may be acceptable on condition of that other clients order same specifications at the time of orderingANNEX Chemical Composition Chemical Composition conforms to the standard specification of GB/T 3190, EN 573 and ASTM B209 1050, 0.25 040 0.05 0.05 0.05 - 0.05 0.03 0.03 - 99.50 10504, 0.25 0.40 0.05 0.05 0.05 . 0.07 0.05 0.03 - 99.50 1060, 0.25 | 0.35, | 0.05 0.03 0.03 - 0.05 | 0.03 0.03 | - 99.60 1100 0@6si+Fe omsaay| oo | - | - | aw | - | oo | oas | aeoo 1200, | 1.00 Si+ Fe. 0.05 0.05 - + 0.10 | 0.05 0.05 | 0.15 99.00 iS 055SirFe | 00s | 00s | 00s | - | 00s | oos | cos | - | onas 1235 O85Si+Fe 0.05 0.05 0.05 - o10 | 0.06 | 003 > | 99.35 2014 05-12) 07 39-50 0412 02-08 040 | 025 0.15 | 0.05 0.15 | wemainder 2017 0.208 07 3545 04-10 04-08 010 | 025 0.15 0.05 0.15 | remainder 2024 «050050 3849 003-09 | 1248 | 010 | 025 0.15 | 005 | 0.15 | mainder 3003 0.60 070 005-020 1.0-1.5 - - 0.10 - 0.05 0.15 | remainder ao 030 | 070 025 1045 | 091s| - | aa | - | 005 0.15 | rmainder 3005 0.60 0.70 0.30 10-15 | 02-06 0.10 025 0.10 0.05 0.15 | remainder 3105 0.60 0.70 0.30 03-08 | 02-08 0.20 0.40 0.10 0.05 0.15 | remainder sms 030 070 «0 om | Ost1) ot | 02 | - | 005 | 018 | wmander 5052 0.25 040 0.10 0.10 22-28 | 015-035) 0.10 - 0.05 0.15 | remainder 5754 040 040 0.10 050 (26-36 0.30 0.20 | 0.15 0.05 | 0.15 | mainder 5083040 040 01010 | 40-49 |005.025| 025 | 0.15 | 005 | 0.15 | wmanaer 6061 04-08 070 015-04 O15 08-12 004-035) 025 | 0.15 0.05 | 0.15 | remainder 6082 07-13 0.50 0.10 04~1.0 | 06-12 0.25 020 0.10 0.05 0.15 | remainder 7075 040050) 12-20 OK | -21-29 018-028 51-61 0.20 0.05 0.15 | remainder 8011 0509 0610 010 Of | 0.05 | 005 | 010 0.08 005 0.15 | remainder BOTA 04-08 05-10 010 0.10 | 010 | O40 | O10 0.05 0050.15 | remaindor 8079 005-03 07-13 0.05 - : - ato - 0.05 0.18 | remainder NOTE / Limits are in mass percent maximum unless shown as a range or sated otherwise 23MECHANICAL / For Foil PROPERTIES General Use Tensile 0.006-0.009mm 40-100 - ~0,009-0.025mm 40-105 = 71.5% +0.025-0.040mm 50-105 5 > 2% ° *0,040-0.080mm 55-105 >2% >0,090-0.140mm | 80-115 >12% : >0.140-0.200mm 60-115 715% : te 0.008-0.025mm z : : ‘100 H22 +0.025-0.080mm 90-195 : > 23% He >0,090-0.200mm 90-135 24-63% - 1200 0.008-0.025mm = . = 1236 Hi4,H24>0.025~0.080mm 110-160 > 2-3 ~0.090-0.200mm 110-160 2436-6 z 0.006-0.025mm : 5 : Hi,H26 *0.025~0.080mm 125-160 : >1% >0.090-0.200mm | 125-180 > 2% : H18 0.006-0.200mm 2140 - : Hi9 (0.006-0.200mm 2160 : z 0.008-0.012mm | 80-135 : : ° +0.012-0.200mm 80-140 - = 0.020-0.050mm | >90-180 2 23% ys >0,05-0.200mm | ~80-130 > 10% i) 0.030-0.200mm | 140-170 : - sos Hea | 0.030-0.200mm | 140-170 > 1% = H16 0.100-0.200mm 2160 : - H26 0100-0. 200mm 2160 >1% - Hie © 0.010-0.200mm 2190 >1% 5 Hig 0.018-0.100mm 2200 E E 0.008-0.008mm 50-100 5 705% >0.009-0.025mm 55-100 - 1% > 0.025-0.040mm 55-110 > 4% a >0,040-0.090mm | 60-120 >4% +0,090-0.140mm 60-120 >13% é 801 >0.140-0.200mm | __60~120 >15% : 011A 0.035-0.080mm 90-150 5 ery e079 hed +0,090-0.200mm 90-160 >5%-6% 0.035-0.090mm 120-170 »%rB% Hae >0,080-0.200mm | 120-170 > 4%-5% H26 0,035-0.200mm 140-190 216-2 Hie 0.035~0.200mm 160 - - Hig 0.035-0.200mm 2170 : NOTE / Based on GBIT 3198MECHANICAL / For sheet and Plate PROPERTIES / General Use aoe cee Recut) Beer a oe ec ee oe arene Min | Max | Min Max Min | Max oder etal GAL 0208 60 100 - : - : : = |= 5 1820% + : ° ‘oes 60 0) - OY CSO = 4050 ing nog 0208 88 MO | : >oeeo 9 100) | OH : Hi6 02-30 130 ~oe pe a - ° 02126 65) 9 | - - | | 9 2 - | +20 -2035% - 20-26% Hi 02-60 105 45 | =; | (105 | 45 8S | BHO FRM 1050a_H24 02-80 105 | 45 | = = | 105 | 4575) | #75 ON =3-8% 02-05 140 - e185 oi) = [910] 1% || Fm ee >05-30 140 ee) vid) - |>iao| 2h | ae ° 02-00 60 100) 8 95 - | - 18 +15 | - 16-25% >18-25% 1050 Hid, Hg) 02-60 95 135 | 85 1200 | OO | tN > 1%-10%) H18 02-30 125 110 : = | a5 | oes | - sta > t%) = ° 02-60 75 | 105 | 75 105 - | - 25 =25| - =15-80% >15~30%| - 4400 Ht4,H24| 02-40 110 | 145 | HO 45 |= | 785 95) mH > 1MBK) Hie 02-30 150 150 De ao ta | ° 0.2125 95 140 | 95 130-95 | 13573535 F352 14-25% > 15-24% Hi2 02-60 120 160 | 120 160 120 | 160-90 =85 = 90 36% 36% ~346% 3003 H22 02-60 120 | 160 | 120 160 120 | 160 80-85 | 780 60% 756% -6-0% Hi 02-60 145 195 | 140 180145 | 1857125 #115125 Death 3 TB ad Het 02-60 145 | 195 | 140 180 145 | 185 118 #115 | > 115 dB TBH 46M Oni | o2125 | 155 | 200 | 150 | 200 | 165 | 200 | =60 | 60 | ~60 ~1%10% =o-18% | 19-16% 3004 H22,H32| 02-60 190 | 240 | 190 240 | 190 | 240 >149 145 | > 145 47% > 1SH) > AAT HOH, H34 | 0.230 220 | 265 | 220 265 200 | 265 7170 >170 | 170 Bt 18% > IAN OHI | 02-60 115 | 165 | 15 165 15 | 165-45 745 | 745 >12-19% > 10-20% > 12-19% 3005 Ht 02-60 170 218 | 105 215170 | 215 7150 7145 | 150 t-3 TO THM Hot 0230 170 | 26) = = 170 | 25 3180-180 2% Onin | 03220 100 | 155 | 95 | 145 | 100 | 155 | -40 | 735 | 740 14-17% > 16-20%[> 14-17% 3105 Ht4 032-20 150 | 200 | 150 200 | 150 | 200 >190 125 | >130 >2% othe 2% Ha 02-20 150 | 200 | 150 160 | 200 120 >125 | =120 45% > 2-6%| >4-8% OHI | 02-125 100 | 145 | 105 145 100 | 145 #8535 #35 15-20% > 12-20% > 15-24% 5005 | -H22,H32| 05-60 125 | 165 | 120 160 125 | 165 ~80 785 8) *SHB 7TH ~ SEH H24,H34 | 05-60 M5 | 185 | 140 180 145 «185 > M0. 105 > 110 4-0% > St—5% >4-6% hie 63-125 118 118 ~[L- Le [== 70% 8 >125-40 105 105 Ee ee oni | 0260 170 | 215 | 170 215 | 170 | 26 | 765 | 65 | 765 12-10% > 15-10% |> 12-18% sos 2482) 02-60 210 | 250 | 218 265 | 210 | 250 180 (+160 |= 180 | =5-10m =4-7%| =5-10% Hau, H3d | 0.260 280 | 280 | 235 285 240 | 280 > 180 >180 | >150 47% > 3-6% 247% an 63-125 190 190 = [= | 0) to | - 27h >T% >125-40 | 170 | 170 = [= 20 65 |= >40% (A) > 10% (A) 25Pei Seo Siro SC ra Bernese) aed Rae LE ECL Tc gr ae Fm aa Oc ss P ) 485 o 075-35 - | = 200 270 | 190 190 | 80) ma >ATH19% > 12-18% Him forms - | - | - | - | 190) a0 - | - | oe) - - 712-18% H22,H82/ 02-125 - |---| 220 70 | = 2T-N% s7s4 H24, 434 02-125 - | - | - | - | 240 280 - | - 160 > 76-10% eos - |---| (100 - |= toa = - >12% Hi 3426-25 = | | 190 =| = [oo] - : > 10%) 2250-80 = = | «180 - = 80 = - = 12%) 125-63 275 | 350 275 950 | 275 950 >125, 125-200] > 125 >12-15% > 18% > 12-15% O,H114 |-6.3~12.5 275 | 350 | 270 345 | 270 | 345 > 125| 115-200] - 116 716% © > 16% 716% 2426-40, 275 | 350 | 270 345 | 270 | 345 | >125| 115-200-118 | - 18%) 18% > 18%) 02-32 305 | 380) - | - | 305 | 300 >215) - |>215) >5-8% - > 58% 50a 422, H32 732-60 305 | 980 | 905 385 | 305 | 380 -215| -215 |-218| 8% | -10-12% —~a% H24,H34)/ 02-60 340 | 400 - —- | 340 400 >250) - 250 47% 247% lem 6312.5 275 275 275 | 7 425| +125 | > 125 > 12% 12% 212% [| 2125-40 275 (2s 25 2425| >125 |>125 | > 10% > 10%), > 10% 63-125 400 400 400 >250/ >260 >250>14% => 14% = 1495 7125-25 400 400 400 >250| >260 |>250 | 12%. > 12%) > 12%) 2014 1451 >25-50, 400 400 400 >250| +250 |+250 | > 10%) > 10%UAl_>7-10%1) > 600-80 395 396 305 | >250/ >260 |>250 | 7% *Teinl > 7%) morltas, | 22125) 385 ee es| le 22% : 7125-50 365 =e | = | =e tas] = = tz : 65-125 440 440 440 2290) >280/>290 > 12% «12% 19% 2024 T3651 > 12.8-25 435 435 430 >290) >290 |>200 > 7%iA) THUR) > 11%) 225-40 425 425 430 >290| >290 | >290 > 6%iA) > OIA > 11%) ya, rast | OE125, 205 205 205 sito] sta |=410 | =12-18% = 16-18%) > 12-18% Gist 2125-80 205 205 205 | >110| > 110 |» 110 14-16% -14~16% 0) > 14-15%) 76, 7651 | 25128, 290 290 280 >240| >240 |>240 | >6-10% > 10% >6-10% >125-100 290 230 280 >240) >240 | >240 >5-B% IA) >5-B%U) > 5-81) qatast 04125 208 = + | 205 D110) = 110) 12-15% >12-15% >12.5-80 205 - = | 205 | S110) => 110 12-13%) => 12-13%) 6082 T6 04-60 310 ++ | 310 >260/ =| >260 810% =~ ~6-10% yest | 806125, 300 == | 300 >255|~ | >256 28% 29% yy >12.5-100 295 = |= | 285 >240|- |>240 | > 7-8%IN >T-8HU) 63-125 540 540 540 2460) >460 | 460 29% > 9% 28% 212.5-25 540 540 540 2470 >470 >470 8%) >_> BH 707s Te51 | >25.0-60, 530 530 530 >460| >460 |>460 5% IA) 5% BK >50,0-60 525 525 525 2440) >440 | >440 4%) >4% >a *60.0-80 495 | 495 495 | 420/420 [>420 4H) 4%) 4% CA) NOTE / The A value for elongation is the elongation measured over a gauge length of 5.65 \SO(where SO is the initial cross-sectional area of the test piece), and expressed in percent