MS Series

Machine protection doors

 EFA-SRT® MS

A glance at the advantages of the

EFA-SRT® MS high speed roll-up door:
• EC type-tested safety component according to
Machinery Directive 2006 / 42 / EG
• Suitable for use as a movable separating
safety guard
• Functional safety performance level »d«
• Maximum speed up to 1.8 m / s
• Door curtain made from transparent flexible PVC
• Special curtains are available on request
• Up to 250,000 cycles per year
• Maximum of 7 cycles per minute
• Life cycle 12 years

Due to its space saving, compact design the EFA-SRT® MS high For special applications: For welding booths, the EFA-SRT® MS can
speed roll-up door satisfies the requirements for optimum integra- be equipped with a flame-resistant door curtain and an optional UV
tion into safety guard applications. The EFA-SRT® MS comes with protective window.
a fully transparent door curtain equipped with warning stripes as
standard; the hard wearing fabric is transversely stable and offered
in a range of fabric colours finishes. Further fabric options are also
available, including flame resistant materials and UV protective win-
dows for welding applications. All fabric curtains are also suitable
for locations where paint or adhesives are applied.

That’s what it is all about:

The interaction of a high-performance frequency converter control
unit together with a functionally adjusted drive allow for the high
cycle rate necessary in manufacturing processes. The absence of a
counter balance mechanism allows the side frames of the door to
be kept very slim, and at the same time reduces maintenance and
necessary components significantly.

Transparent fabrics ensure clear vision of the integrated

safety end-limit switch of Cat.4 / Pl »e« in accordance with
DIN EN ISO 13849-1.

Thanks to the optional floor supports the door can be installed as a

stand-alone system, while uneven ground can be compensated for
with adjusting screws.

02
Machine protection
Drive EFA-SST® MS EFA-SRT® MS
Push-on gear unit with absolute
encoder, for EFA-SRT® MS including
gear unit failure protection.

Door control
The control unit which can be used
worldwide operates at performance
level PL »d« for safety-relevant
control circuits and can be extended
using the MS-AM connection module.

Weight counter-balance
The EFA-SST® MS operates by means
of virtually maintenance-free tension
spring assembly with electromechani-
cal function monitoring.

Locking
Safety end-limit switches Cat. 4 / Pl
»e« in allowance with DIN EN ISO
13849-1 fitted with transparent
covering removable for adjustment EC type examination as safety component,
and replacement.
movable separating safety guard according
to Machinery Directive 2006 / 42 / EC at IFA
Floor support
Institut für Arbeitssicherheit [an institute for
Optional supports in order to install
the door system as a stand-alone research and testing of the German Social
system. Levelling of uneven ground Accident Insurance in Germany].
possible by means of screws.

Safety
Safety contact strip in the main
closing edge, in combination with an
additional light barrier.

03
 EFA-SST® MS

A glance at the advantages of the

EFA-SST® MS high-speed spiral door:
• EC type-tested safety component according to
Machinery Directive 2006 / 42 / EG
• Suitable for use as a movable separating
safety guard
• Functional safety performance level »d«
• Maximum speed up to 2.7 m / s
• Door leaf constructed from high strength, compact
extruded aluminium laths
• Permanent transparent sight laths
• Incorporated counter-balance with spring fracture
detection
• Up to 250,000 cycles per year
• Maximum of 7 cycles per minute
• Life cycle 12 years

The ingenious construction principle of the EFAFLEX spiral, com-

bined with slim double walled extruded aluminium laths, permits
such a compact design. This harmonised design guarantees very
smooth, safe use supported by high speed operation. The con-
tactless operation of the door leaf prevents surfaces from being
scratched, while the optional transparent vision laths remain trans-
parent even after extensive use.

More special advantages

Used as a stand-alone separating safety guard, the EFA-SST® MS
high-speed spiral door fulfils the requirements for a safe, modern
machine protection door. Together with optional floor supports,
the self-supporting simple design allows stand-alone installation.
To ensure protection in low height situations, additional covers are
available for the spiral unit.

Of course, the EFA-SST® MS is also equipped with a transparent

covering providing a clear view of the integrated safety end-limit
switch of Cat. 4 / Pl »e« in accordance with DIN EN ISO 13849-1.

EFA-SST® MS high-speed spiral door especially for industrial

application as a functionally safe machine protection door.

04
Technical data: MS series

SRT-L MS SRT-S MS SST MS

Application as safety component separating safety guard

Wind load, max.* According to DIN EN 12424 in classes 0 0 4
Operating forces / safe opening According to DIN EN 13241-1 fulfilled fulfilled fulfilled
Air permeability* According to DIN EN 13241-1 in classes 0 0 0
Direct airborne sound insulation RW* in dB according to DIN EN 717-1 12 12 23
Door size (in mm) Width W max. 3,000 6,000 3,000
Height H max. 3,000 3,500 3,000
Maximum door blade speed* in m / s 1.8 1.8 2.7
Average speed, approx* Opening in m / s 1.3 1.3 2.2
Closing in m / s 0.8 0.8 0.6
Door blade guidance Round spiral – –
Steel design Steel-sheet frame, galvanized
Powder-coated according to RAL
Door blade EFA-CLEAR® single walled / anodised – –
Ventilation laths – –
Colour according to RAL (without window panel) – –
Door blade lath made of aluminium E6 / EV1 anodised – –
Door curtain flexible PVC, transparent with warning strips in
–
different colours
transversely stable material in different colours with / without
/ / –
window
Fire class Building material DIN 4102 B2 B2 B2
Weight balancing by – – Spring
Designed for approx. … load changes p.a. 250,000 250,000 250,000
Drive Electric motor with frequency converter
Control EFA-MS
Frequency converter
MS-AM connection module
Main switch with foil key pad
Lead Power supply connection 400 V / 50 Hz
Circuit breaker 16 A (K) 16 A (K) 16 A (K)
Manual locking – – –
Electronic locking
Functional safety PLd PLd PLd
Absolute position detection (PD)
Support for installing the door system as a stand-alone system
Emergency opening Crank handle –
Lever (lockable) – –
Safety equipment Contact edge
Light barrier
Approach area monitoring
External light grid
Activator Connection of all standard activators possible

Standard, on request, – not available, *depending on door blade, door blade guidance and door size, subject to technical changes!

05
EFAFLEX
Tor- und Sicherheitssysteme
GmbH & Co. KG
Fliederstraße 14
DE-84079 Bruckberg / Germany
Telephone +49 8765 82-0
www.efaflex.com
info@efaflex.com

Technological advancement. Pioneering design.

EFAFLEX® is a registered and legally For more than 40 years, EFAFLEX has developed and designed reliable and highly-efficient high-
protected trademark. speed doors. With innovative technology and pioneering solutions for special requests, EFAFLEX
Subject to technical modifications. continually provides the market with new stimuli. This leadership role through superior technology,
Images sometimes show special the best quality and a maximum degree of security is part of EFAFLEX’s identity. More than 1,000
solutions. Overall design: employees guarantee competent consultation and excellent service. Worldwide and always near you.
www.creativconcept.de 11 | 17