Scribd
Upload
78 views1 page

BSC IP Setup Diagram V03

This document provides a diagram of an IP access connectivity setup between an MSC, SGSN, BSC, and other network components. It shows the interfaces and protocols used, including 8 E1 PCM interfaces between the MSC and BSC, IP transport over DSL, WiMAX, or other networks between components, and RJ45 interfaces for Gb/IP and Gb/FR. Internal networking uses a BSC Ethernet switch and reserved IP addresses within the 192.168.0.0/24 range.

Uploaded by

Ali Sahal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views1 page

BSC IP Setup Diagram V03

This document provides a diagram of an IP access connectivity setup between an MSC, SGSN, BSC, and other network components. It shows the interfaces and protocols used, including 8 E1 PCM interfaces between the MSC and BSC, IP transport over DSL, WiMAX, or other networks between components, and RJ45 interfaces for Gb/IP and Gb/FR. Internal networking uses a BSC Ethernet switch and reserved IP addresses within the 192.168.0.0/24 range.

Uploaded by

Ali Sahal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IP Access Connectivity Diagram

A Interface:
MSC-1
- 8 E1 PCM
- RJ45 terminated
or the BSC MGW
- OPC: ?
- DPC: ?
Abis IP transport: DSL, WIMAX, Corporate, Satellite Gb/IP:
SGSN
- RJ45 terminated
Private/Public IP Gb/FR:
Network
- RJ45 terminated for the
BSC FRIP card

MGW eth-1 Internal BSC


Router ethernet Switch
Traffic Network: Card (192.168.0.0/24)
Abis  192.168.0.2/3/4/5
NOTE! If the Router will do NAT, eth-0 Card eth-1
reserved
the BTS OML target IP has to be
the public IP of the Eth-0 Abis Card  firewalled
router, otherwise, the BTS  to be FRIP
OML target IP will be provided by
Eth-0 BSC Card
the ABIS eth-0 IP customer
BSC  to be provided
eth-1 by customer
Card
Internal customer
eth-0 network IP address

nanoGSM BSC Unit

Support Terminal
customer IP
Network
Secure VPN
provided by OMC-R Server
customer?
Config Manager OMC IP  to be provided
by customer

You might also like