MILL TEST CERTIFICATE Jindal Stainless (Hisar) Limited.
(INSPECTION CERTIFICATE) IS 6911
In Accordance with EN 10204 :2004 Type 3.1
CM/L 9100015395
c3c917hvdMDEzMDM3Njk=
CUSTOMER :VARIETY METAL CORPORATION CERTIFICATE NO. :JSHL-6043/QA/2022-23/DOM/01303769
CITY :DELHI DATE :22.09.2022 VEHICLE NO. :HR38T8541
P.O.NO. :979266_VMC/22-23/120 PO DATE:19.09.2022 Ref. MTC No. :JSHL-CRD/QA/2022-23/DOM/01300675
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :3010156153
SHIPMENT/DELIVERY NO. :6500032543 NET WT(MT) :2.951
Material Description/Product Grade / Type Material Specifications Process-Route
STAINLESS STEEL 304/1.4301 ASME SA 240/SA 240M SEC.II PART A-21, ASTM EF-AOD-LRF-CCS
A240/A240M-22, IS 6911 :2017 AMD NO.3
PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 2002148776 374919 2.951 115 220708A50 1.000 1,250.00 2,500.00 N4P Mill Edge PRIME
CHEMICAL ANALYSIS (LADLE)
HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
220708A50 0.046 0.92 0.003 0.038 0.41 8.05 18.07 0.057 - - - - -
MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE
Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm
1 315 - 664 61 - - 84 / 83 -
ADDITIONAL INFORMATION
1)MATERIAL SOLUTION ANNEALED AT TEMPERATURE 1040°C MINIMUM AND QUENCHED IN AIR-WATER MIST AT A SUFFICIENT RATE TO PREVENT RE-PRECIPITATION OF CARBIDES
2) THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD NO.3 CHEMICAL & MECHANICAL PROPERTIES OF PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME
OF TESTING & INSPECTION CONTAINED IN BIS CERTIFICATION.
3) ABOVE MATERIAL ALSO FULFIL THE REQUIREMENTS OF ASTM A480/A480M/ASME SA 480/SA480M
4) MATERIAL GRADE AS PER IS 6911 :2017 AMD NO.3: 304
A) FINISHES: HOT ROLLED N1, 1D( "N1" STANDS FOR NO.1) . COLD ROLLED 2D, 2B, BA, N4, BX, HC, LN, MMT, MR, SCB, SL, SR ("N4" STANDS FOR NO.4,
"BX" STANDS FOR BOX FINISH, "HC" STANDS FOR HONEY COMB, "LN" STANDS FOR LINEN, "MMT" STANDS FOR MACROMAT, "MR" STANDS FOR MOON ROCK,
"SCB" STANDS FOR SCOTCH BRITE, "SL" STANDS FOR SLIP FREE, "SR" STANDS FOR STRIPE ) "P" STANDS FOR WITH TOP PVC , "H" STANDS FOR WITH BOTH SIDE PVC ,
B) PLATE: MATERIAL 5 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
C) SHEET: MATERIAL UNDER 5 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
D) COIL:IN "PHYSICAL DESCRIPTION" LENGTH MENTIONED AS "COIL". E) NO WELD REPAIR HAS BEEN DONE ON ANY PRODUCT. F) DIMENSION TOLERANCE AS PER SO/OA
Jindal Stainless (Hisar) Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in QMS:ISO 9001- 2015
Cold Rolling Division, accordance with requirements of the material specification, SO/PO and has been found to meet EMS:ISO 14001-2015
O.P. Jindal Marg, HISAR-125005.INDIA, these requirements. ISO 45001:2018
TEL :+91-1662 -222471-83, ISO 50001:2018
FAX :+91-1662 -220496, 220476 The material supplied under this Test Certificate is free from any radioactive contamination as CERTIFIED COMPANY
Email: [email protected] checked by procedures established by Jindal Stainless (Hisar) Limited as per the
Format ref. : QAD-CR/09/F REV.14 Eff.Date 24/09/2021 recommendations provided by AERB.
Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1
