Scribd
Upload
48 views1 page

Solenoid Valve Cable Plug

The document describes various DIN43650A electrical connectors. It lists the part number, description, dimensions, and key specifications for each connector type. The connectors differ in features such as number of pieces, circuitry included, voltage rating, IP sealing rating, maximum current rating, and cable size accommodated. Some connectors have LED indicators, varistors for surge protection, rectifiers, or pulse width modulation for energy savings. The connectors are available in basic, industrial, and ATEX explosion-proof versions.

Uploaded by

stenio augusto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

Solenoid Valve Cable Plug

The document describes various DIN43650A electrical connectors. It lists the part number, description, dimensions, and key specifications for each connector type. The connectors differ in features such as number of pieces, circuitry included, voltage rating, IP sealing rating, maximum current rating, and cable size accommodated. Some connectors have LED indicators, varistors for surge protection, rectifiers, or pulse width modulation for energy savings. The connectors are available in basic, industrial, and ATEX explosion-proof versions.

Uploaded by

stenio augusto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CONNECTORS DIN43650A

Part
Description Overall Dimensions
Number
Basic 1 Piece Black No Circuit
PG9 for 6 to 8 mm cable
NBR Seal IP65, Max 16 Amp
DIN2 Resistance <4 mOhm
Clamping contact
Optional Conduit Entry 5 – 6mm cable, 1/2NPT
1.5mm² Cable section max
Basic 1 Piece Black No Circuit with moulded 3 meter PG9 9
mm cable
NBR Seal IP67, Max 10 Amp
DIN3 Resistance <4 mOhm
IP67 Screw contact, 0 to 250 volts
1.5mm² Cable section max

1 Piece Clear With LED (Red)


PG9 for 6 to 8 mm cable, NBR Seal IP65, Max 1.0 Amp
DIN2LEDR +
Resistance <4 mOhm, Clamping Contact, Power
voltage
Consumption Max 5mA, Drop off delay approx 3mSec
(24 – 110-
Wrong polarity protection, Optional 24v or 110v or 250v
230)
Yellow + Green LED, 5 – 6mm or 1/2NPT. 1.0mm² Cable
section max
1 Piece Clear With LED (Red) + Varistor (VDR)
PG9 for 6 to 8 mm cable, NBR Seal IP65, Max 1.0 Amp
DIN2LEDVDR
Resistance <4 mOhm, Clamping Contact, Power
+ voltage
Consumption Max 5mA, Drop off delay approx 3mSec
(24 – 110 –
Wrong polarity protection, Optional 24v or 110v or 250v,
230)
Yellow + Green LED, 5 – 6mm or 1/2NPT. 1.0mm² Cable
section max
2 Piece Clear With Rectifier + VDR
PG9 for 6 to 8 mm cable, NBR Seal IP65, Max 1.0Amp
Resistance <4 mOhm, Clamping Contact
DIN2R-All Power Consumption 0.5mA, Drop off delay approx 3mSec
Wrong polarity protection, Voltage 0 to 230v, Yellow + Green
+ Red LED, 5 – 6mm or 1/2NPT Conduit. 1.0mm² Cable
section max

2 Piece ATEX Black without circuit II 3G II 3D Ex nA IIC


T95C
6-11173-0102 PG9 6 to 8mm cable, NBR seal IP65, EN175301-803-A
To be used with ATEX coil 125930.1-5146 or 125950.1-
00/5146 ATEX coil.

2 Piece Clear with Diode and Pulse width Modulation energy


saving 11 to 89% with LED
PG9 for 6 to 8mm cable, NBR seal IP65, Max1.0 Amp
DIN2-PWM- Delay 175 mSec, switching frequency 3.1Khz at 24vDC
24v 8 holding power reduction variations by jumper to achieve
power saving 11%, 22%, 33%, 44%, 56%, 67%,78% and
89%

CONNECTORS Industrial Form


Basic 1 Piece Black No Circuit
PG9 for 6 to 8 mm cable
NBR Seal IP65, Max 10 Amp
DIN1 Resistance <4 mOhm
Clamping contact
Optional 5 – 6mm or 1/2NPT
1.0mm² Cable section max

1 Piece Clear With LED (Red)


DIN1LEDR + PG9 for 6 to 8 mm cable, NBR Seal IP65, Max 1.0 Amp
voltage Resistance <4 mOhm, Clamping Contact, Power
(24 – 110- Consumption Max 5mA, Wrong polarity protection, Optional
230) 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or
1/2NPT. 1.0mm² Cable section max

1 Piece Clear With LED (Red) + Varistor (VDR)


DIN1LEDVDR PG9 for 6 to 8 mm cable, NBR Seal IP65, Max 1.0 Amp
+ voltage Resistance <4 mOhm, Clamping Contact, Power
(24 – 110 – Consumption Max 5mA, Wrong polarity protection, Optional
230) 24v or 110v or 250v, Yellow + Green LED, 5 – 6mm or
1/2NPT. 1.0mm² Cable section max

2 Piece Clear With Rectifier + VDR


DIN1R + PG9 for 6 to 8 mm cable, NBR Seal IP65, Max 1.0Amp
voltage Resistance <4 mOhm, Clamping Contact, Power
(24 – 110 – Consumption 0.5mA, Drop off delay approx 3mSec
230) Wrong polarity protection, Voltage 24 – 110 - 230v, Yellow +
Green + Red LED. 1.0mm² Cable section max

You might also like