Scribd
Upload
71 views11 pages

Data Communication Project For 4th Year ECE Student

Uploaded by

Joey Tribianni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views11 pages

Data Communication Project For 4th Year ECE Student

Uploaded by

Joey Tribianni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Adama Science and Technology University

School of Electrical Engineering and Computing


Program of Electronics and Communication
Engineering

Data Communication and Computer Networks


Basic network Configuration project
Submission date may 24/2022

Prepared by Yibeltal Abebaw


Group one
Network topology

Device information
Device Interface Ip address Subnet mask Default
gateway
Router1 Fa0/0 192.168.1.1 255.255.255.0 N/A
Se0/0/0 192.168.2.1 255.255.255.0 N/A
Router2 Se0/0/0 192.168.2.2 255.255.255.0 N/A
Se0/0/1 192.168.3.1 255.255.255.0 N/A
Fa0/0 192.168.5.1 255.255.255.0 N/A
Router3 Se0/0/0 192.168.3.2 255.255.255.0 N/A
Fa0/0 192.168.4.1 255.255.255.0 N/A
Pc0 N/A 192.168.1.2 255.255.255.0 192.168.1.1
Pc1 N/A 192.168.1.3 255.255.255.0 192.168.1.1
Pc2 N/A 192.168.5.2 255.255.255.0 192.168.5.1
Pc3 N/A 192.168.5.3 255.255.255.0 192.168.5.1
Pc4 N/A 192.168.4.2 255.255.255.0 192.168.4.1
Pc5 N/A 192.168.4.3 255.255.255.0 192.168.4.1
Tasks
Task 1: Cable the Network
What type of cable is used to connect the Ethernet interface on a host PC to the Ethernet interface
on a switch? ___________
What type of cable is used to connect the Ethernet interface on a switch to the Ethernet Interface
of router?
What type of cable is used to connect the Ethernet interface of two different routers?
Task 2: Perform Basic Configuration of Router R1.
Task 3: Perform Basic Configuration of Router R2.
Task 4: Perform Basic Configuration of Router R3.
Task 5: Configure IP Addressing on the Host PCs.
Task 6: Verify and Test the Configurations.
Task 7: verify the connectivity between hosts using ping command.

Exercise : As the figure shown below four routers connected together to transfer
data from different computer and try to send packet from those different
computers.
Group Two
Network topology

Device Interface Ip address Subnet mask Default


gateway
Router1 Fa0/0 192.168.1.1 255.255.255.0 N/A
Se0/0/0 192.168.2.1 255.255.255.0 N/A
Fa0/1 192.168.5.1 255.255.255.0 N/A
Router2 Se0/0/0 192.168.2.2 255.255.255.0 N/A
Se0/0/1 192.168.3.1 255.255.255.0 N/A
Router3 Se0/0/0 192.168.3.2 255.255.255.0 N/A
Fa0/0 192.168.4.1 255.255.255.0 N/A
Fa0/1 192.168.5.2 255.255.255.0 N/A
Pc0 N/A 192.168.1.2 255.255.255.0 192.168.1.1
Pc1 N/A 192.168.1.3 255.255.255.0 192.168.1.1
Pc4 N/A 192.168.4.2 255.255.255.0 192.168.4.1
Pc5 N/A 192.168.4.3 255.255.255.0 192.168.4.1
Tasks
Task 1: Cable the Network
What type of cable is used to connect the Ethernet interface on a host PC to the Ethernet interface
on a switch? ___________
What type of cable is used to connect the Ethernet interface on a switch to the Ethernet Interface
of router?
What type of cable is used to connect the Ethernet interface of two different routers?
Task 2: Perform Basic Configuration of Router R1.
Task 3: Perform Basic Configuration of Router R2.
Task 4: Perform Basic Configuration of Router R3.
Task 5: Configure IP Addressing on the Host PCs.
Task 6: Verify and Test the Configurations.
Task 7: verify the connectivity between hosts using ping command.
Exercise 2: As the figure shown below four routers connected together to transfer data
from different computer and try to send packet from those diffent computers.
Group Three
Network topology

Device Interface Ip address Subnet mask Default


gateway
Router1 Fa0/0 172.16.1.1 255.255.255.0 N/A
Se0/0/0 172.16.2.1 255.255.255.0 N/A
Fa0/1 172.16.5.1 255.255.255.0 N/A
Router2 Se0/0/0 172.16.2.2 255.255.255.0 N/A
Se0/0/1 172.16.3.1 255.255.255.0 N/A
Router3 Se0/0/0 172.16.3.2 255.255.255.0 N/A
Fa0/0 172.16.4.1 255.255.255.0 N/A
Fa0/1 172.16.5.2 255.255.255.0 N/A
Pc0 N/A 172.16.1.2 255.255.255.0 172.16.1.1
Pc1 N/A 172.16.1.3 255.255.255.0 172.16.1.1
Pc4 N/A 172.16.4.2 255.255.255.0 172.16.4.1
Pc5 N/A 172.16.4.3 255.255.255.0 172.16.4.1

Tasks
Task 1: Cable the Network
What type of cable is used to connect the Ethernet interface on a host PC to the Ethernet interface
on a switch? ___________
What type of cable is used to connect the Ethernet interface on a switch to the Ethernet Interface
of router?
What type of cable is used to connect the Ethernet interface of two different routers?
Task 2: Perform Basic Configuration of Router R1.
Task 3: Perform Basic Configuration of Router R2.
Task 4: Perform Basic Configuration of Router R3.
Task 5: Configure IP Addressing on the Host PCs.
Task 6: Verify and Test the Configurations.
Task 7: verify the connectivity between hosts using ping command.
Exercise 3: As the figure shown below four routers connected together to transfer data
from different computer and try to send packet from those different computers.
Group Four
Network topology

Device Interface Ip address Subnet mask Default


gateway
Router1 Fa0/0 172.16.1.1 255.255.255.0 N/A
Se0/0/0 172.16.2.1 255.255.255.0 N/A
Router2 Se0/0/0 172.16.2.2 255.255.255.0 N/A
Se0/0/1 172.16.3.1 255.255.255.0 N/A
Fa0/0 172.16.5.1 255.255.255.0 N/A
Router3 Se0/0/0 172.16.3.2 255.255.255.0 N/A
Fa0/0 172.16.4.1 255.255.255.0 N/A
Pc0 N/A 172.16.1.2 255.255.255.0 172.16.1.1
Pc1 N/A 172.16.1.3 255.255.255.0 172.16.1.1
Pc2 N/A 172.16.5.2 255.255.255.0 172.16.5.1
Pc3 N/A 172.16.5.3 255.255.255.0 172.16.5.1
Pc4 N/A 172.16.4.2 255.255.255.0 172.16.4.1
Pc5 N/A 172.16.4.3 255.255.255.0 172.16.4.1

Task 1: Cable the Network


What type of cable is used to connect the Ethernet interface on a host PC to the Ethernet interface
on a switch? ___________
What type of cable is used to connect the Ethernet interface on a switch to the Ethernet Interface
of router?
What type of cable is used to connect the Ethernet interface of two different routers?
Task 2: Perform Basic Configuration of Router R1.
Task 3: Perform Basic Configuration of Router R2.
Task 4: Perform Basic Configuration of Router R3.
Task 5: Configure IP Addressing on the Host PCs.
Task 6: Verify and Test the Configurations.
Task 7: verify the connectivity between hosts using ping command.
Exercise 4: As the figure shown below four routers connected together to transfer data
from different computer and send packet from different computers.
Group Five
Network topology

Device Interface Ip address Subnet mask Default


gateway
Router1 Fa0/0 10.240.1.1 255.255.255.0 N/A
Se0/0/0 10.240.2.1 255.255.255.0 N/A
Se0/0/1 10.240.5.1 255.255.255.0 N/A
Router2 Se0/0/0 10.240.2.2 255.255.255.0 N/A
Se0/0/1 10.240.3.1 255.255.255.0 N/A
Router3 Se0/0/0 10.240.3.2 255.255.255.0 N/A
Fa0/0 10.240.4.1 255.255.255.0 N/A
Se0/0/1 10.240.5.2 255.255.255.0 N/A
Pc0 N/A 10.240.1.2 255.255.255.0 10.240.1.1
Pc1 N/A 10.240.1.3 255.255.255.0 10.240.1.1
Pc4 N/A 10.240.4.2 255.255.255.0 10.240.4.1
Pc5 N/A 10.240.4.3 255.255.255.0 10.240.4.1
Task 1: Cable the Network
What type of cable is used to connect the Ethernet interface on a host PC to the Ethernet interface
on a switch? ___________
What type of cable is used to connect the Ethernet interface on a switch to the Ethernet Interface
of router?
What type of cable is used to connect the Ethernet interface of two different routers?
Task 2: Perform Basic Configuration of Router R1.
Task 3: Perform Basic Configuration of Router R2.
Task 4: Perform Basic Configuration of Router R3.
Task 5: Configure IP Addressing on the Host PCs.
Task 6: Verify and Test the Configurations.
Task 7: verify the connectivity between hosts using ping command.
Exercise 5: As the figure shown below four routers connected together to transfer data
from different computer and try to send packet from those different computers.

You might also like