TECHNICAL DATA SHEET
J700N Polypropylene Homopolymer
For Injection Molding Applications
Product Description
Topilene® J700N is a specially designed polypropylene homopolymer that features high stiffness, high flowability
and balanced mechanical properties. It is suitable for injection molding applications. Topilene® J700N complies
with FDA requirements in the code of Federal Regulations in 21 CFR 177.1520 for food contact.
Characteristics
Typical Application Home appliances / Housewares / Thin-walled articles
Features High stiffness / Balanced mechanical properties / High flowability
Typical Properties
Resin Properties Method Value Unit
Melt Index(230℃, 2.16kg) ASTM D1238 12.0 g/10min
Density ASTM D792 0.90 g/㎤
Tensile Strength at Yield ASTM D638 340 kg/㎠
Flexural Modulus ASTM D790 15,000 kg/㎠
Notched Izod Impact Strength(23℃) ASTM D256 3.0 kg·cm/cm
The values listed above are typical values for reference purpose only and shall not be construed as specifications.
Storage and Handling
This product should be stored in dry condition at temperature below 40°C and protected from UV-light. When
condensation is visible or can be expected, pre-drying is recommended. (Drying condition: 80~100℃/2~4hours at
air circulated condition)
Disclaimer
All information, including product characteristics, applications and properties are for reference purpose only and shall not be construed as
specifications. Before using this product, customers should carefully review the instructions for use of the product to determine whether the
product is suitable for the customer’s particular purpose. The customer is responsible for the appropriate, safe and legal use, processing and
handling of this product. HYOSUNG VINA CHEMICALS CORPORATION assumes no legal responsibility or liability for the contents of this
document. We reserve the right to change the contents of this document without prior notice. This document is copyrighted by HYOSUNG
VINA CHEMICALS CORPORATION. Topilene® is a registered trademark owned or used by HYOSUNG VINA CHEMICALS CORPORATION.
Contacts
Head Office Lot 01CN ~ 08CN, Cai Mep Industrial Park,
Tan Phuoc Ward, Phu My Town, Ba Ria Vung Tau
Province, Vietnam.
Tel: +84-254-393-7949 Fax: +84-254-393-7849
Online [Link]
[Link]
