Cat®
7495
with Rope Crowd
Electric Rope Shovel
Specifications
Dimensions Number and diameter of rollers
Lower: 16, 78 cm (30.7 in)
Dipper payload 100 tonnes (110 tons) Lower Rear: 2, 106.7 cm (42 in)
(Available dipper payloads up to 109 tonnes (120 tons) when specified) Upper: Slides
Dipper capacity 30.6 - 61.2 m3 (40-80 yd3) Take-up tumblers diameter 162 cm (63.8 in)
Length of boom 20.4 m (67 ft) Number and pitch of treads 94, 50.8 cm (20 in)
Effective length of dipper handle 10.9 m (35 ft 10 in) Planetary Propel
Overall length of dipper handle 14.3 m (47 ft) • Dual-motor independent drive
Revolving Frame (Center Section)
Welded, impact-resistant steel Length: 8.38 m (27 ft 6 in)
Weights Width: 3.68 m (12 ft 1 in)
Working weight, with dipper Turntable
and standard links 1 372 123 kg (3,018,670 lbs)
Forged rim alloy steel swing rack pitch diameter 5.26 m (17 ft 3 in)
Net weight, domestic,
Teeth external cut 24.13 cm face (9.5 in)
without ballast or dipper 988 100kg (2,173,820 lbs)
Tapered, forged alloy steel roller rails diameter 4.72 m (15 ft 6 in)
General-purpose dipper
56 m3 (73 yd3) 80 603 kg (177,700 lbs) Number of tapered rollers 50
Tapered rollers diameter 27.31 cm (10.75 in)
Ballast (furnished by customer) 302 614 kg (667,150 lbs)
• These weights will vary slightly depending upon dipper and optional Swing
equipment selection Two planetary gearboxes, each driven by a vertically mounted motor,
are mounted on either side of the revolving frame. Dual-output pinion
shafts from each gearbox engage the swing rack
Main Structures Hoist
A planetary gearbox with dual-output pinions provides the hoist torque
Crawler Mounting transfer from the electric motor to the hoist drum gear
Overall width 200.7 cm
(79 in) treads, standard 11 m (36 ft)
Overall width 259.1 cm Lube System
(102 in) treads 13.5 m (44 ft 3 in)
• Single-line system applies lubricant and grease via the PLC
Overall length of mounting 11.43 m (37 ft 6 in)
• 6 pumps (4 for lubricant and 2 for grease) located in an insulated,
Total effective bearing area 36.1 m2 (388.6 ft2) double-walled lube room
(200.7 cm treads) 374 kpa (54.2 psi.)
Total effective bearing area 46.6 m2 (501.7 ft2)
(259.1 cm treads) 289 kpa (50 psi.)
Electric Rope Shovel—7495 with Rope Crowd
Optimal Working Ranges Electrical
A Dumping height 10.06 m (33 ft 0 in) Drive
A1 Dumping height at maximum IGBT Acutrol drive system
electric crowd limit 8.61 m (28 ft 3 in)
B Dumping radius (maximum) 21.64 m (71 ft 0 in) Power Requirements
C Cutting height (maximum) 17.8 m (58 ft 5 in) Voltage 3 phase, 50/60 Hz, 7200 V
D Cutting radius (maximum) 25.2 m (82 ft 8 in) Average 15-minute demand 926-1 297 kW
E Radius of level floor 17.47 m (57 ft 4 in) Peak power 3 706 kW
G Clearance height • Other voltage options available to suit customer requirements
(boom point of sheaves) 20.87 m (68 ft 6 in) Distribution System Requirements
H Clearance radius Machine on separate system 4 000 kva
(boom point of sheaves) 19.65 m (64 ft 5 in)
I Clearance radius Main Electrical Systems
(revolving frame) max: 9.34 m (30 ft 8 in) System voltage (nominal) 50/60 Hz, 7200 V
J Clearance under frame Trail cable (furnished by customer) SHD-3-#1/0 at 8000 V
(to ground) 3.76 m (12 ft 4 in) Transformer, auxiliary 350 kva, 7200 V primary
K Height of A-frame 14.00 m (46 ft 0 in) Lighting Transformer 25 kva
L Overall Width 13.11 m (43 ft 0 in) 120/240 V secondary
M Clearance under lowest point in
truck frame/propel gearcase 0.90 m (2 ft 11.5 in) Lights
• HPS lights on boom feet, top of A-frame, machinery house, lube room,
N Operator’s eye level 10.61 m (34 ft 10 in) control room, and utility room
• Incandescent lights for ground lights and on walkways
Electric Rope Shovel—7495 with Rope Crowd
Front End
Boom
Boom welded, impact-resistant steel
Boom point sheaves twin-grooved, flame-hardened
Boom point sheave diameters 2.43 cm (8 ft)
Handle diameter 86.36 cm (34 in)
Wall thickness (nominal) 7.62 cm (3 in)
Rope Data
No Diameter Type Construction
Hoist 2 69.8 mm (2.75 in) twin dual 6 x 37
Crowd 1 63.5 mm (2.5 in) twin dual 6 x 37
Hoist 1 63.5 mm (2.5 in) twin dual 6 x 37
Boom Susp. 4 82.6 mm (3.25 in) equalized struct. strand
Dipper Trip 1 19.1 mm (.75 in) single 6 x 37
Crowd
Rope Crowd with the crowd machinery is located at the front center
of the revolving frame, consisting of motor, brake, drum and gearing.
Plastic coated crowd and retract ropes are used to move the dipper
handle fore and aft.
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at mining.cat.com and www.cat.com
© 2011 Caterpillar Inc. AEHQ6517
All rights reserved
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade
dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and
may not be used without permission.
