ome eo ZAMIL STEEL Section 12.6 Zamil Steel’s standard staircase is designed to provide a firm and rigid construction The stair stringers are detailed in such a way that different stair treads (such as checkered plate, grating or concrete filled treads) can be accommodated or replaced without major modifications : Staircases 10f8 Zamil Steel standard staircase is a double flight staircase with an intermediate or mid-landing The main structural members are shop assembled to facilitate erection. This leaves only the simple task of connecting the main members of the staircase to the floor framing, attaching the selected type of stair treads and installing Zamil Steel’s standard handrail system Zamil Steel also offers single flight staircases with the following characteristics * Single flight staircase with top landing * Single flight staircase without top landing * Single flight staircase with top and mid-landing * Single flight staircase with mid-landing ‘The paint applied to staircases will match the paint specified for the primary member of the structureCHAPTER 12 : FLOOR SYSTEMS i Section126 —: Staircases 2of8 | ZAMIL STEEL . SS (ELEVATION) : DOUBLE FLIGHT STARCASE 305ome eo ZAMILSTEEL Secon ines Sibcnees aT —— + Stairc sranease Yoo (ELEVATION): SINGLE FLIGHT STAIRCASE WITH TOP LANDNGCHAPTER 12: FLOOR SYSTEMS eT . — zAwic STEEL Section12.6 —_: Staircases 488 (PLAN): SINGLE FLIGHT STARCASE WITHOUT TCP LANDING (ELEVATION): SINGLE FLIGHT STARCASE WITHOUT TCP LANDINGome eo ZAMIL STEEL Section 126: Staircases 50f8 —— : 1 : Ler ‘STRINGER “TREAD (TYP) (PLAN): SINGLE FLIGHT STARCASE WITH TOP ANDMDLANDNG = (°° (= , ;| 3 1s | roe] 3 Se 3) Be i (ELEVATION): SNGLEFLIGHT STARCASE WITH TOP ANDMDLANDNGCHAPTER 12 : FLOOR SYSTEMS i a ae Section 12.6: Staircases 6s . SS smc smeen) nar (PLAN) SNGLEFLIGHT STAIRCASE WITH MIDLANDING ONLY stants Yeu OLMONDHEIGAT cowmonsan |_| a ELEVATION): SNGLE FLIGHT STARCASE WITH MDLANDING ONLYeee nie ZAMIL STEEL, = WITH CHECKEREDPLATE TREAD, Section 12.6 : Staircases pee tae? WITHCONCRETE TREAD 70f8 WITHGRATING TREAD (CEETION: CONNECTION ATMDLANDNG OR TOP LANONG. man} WITHCHECKEREDPLATE TREAD: WITHCHECKEREDPLATE TREAD: Lene WITH CONCRETE TREAD WITHCONCRETE TREAD WIHGRATING TREAD (SECTION) : CONNECTION AT MID-LANDING (DOUBLE FLIGHT STAIRCASE) ae WH GRATING TREAD (SECTION) : CONNECTION AT MIDLANDING (SNGLE FLIGHT STARCASE)CHAPTER 12: FLOOR Section12.6 —_: Staircases a | Sofg ZAMIL STEEL = see a Soa a Luprseing gue WITH CHECKEREDPLATE TREAD WITHCONCRETE TREAD WITHGRATING TREAD SECTION): CONNECTION AT MEZZANINE LEVEL * a (= meen oe ameeascn gucomsoy ole WITHCONCRETE TREAD WITHGRATING TREAD (SECTION): CONNECTION AT STRINGER BASE Ht - mizuno _.L... oe DETAIL-1): LANDING BEAM TO STRINGER (CETALL-2): HANDRAL TO STRINGER: CONNECTION CONNECTIONome eo ZAMIL STEEL Section 12.7 Zamil Steel offers two types of handrails: (1) industrial handrails for platforms, catwalks, walkways and staircases in factories, warehouses, workshops, etc. and (2) office handrails for staircases and mezzanines in office buildings, showrooms, etc. Handrails may be designed as permanently fixed to the substructure (platforms, catwalks, walkways or staircases), or removable. They are shipped either with one coat of primer paint or in galvanized finish depending on the customer requirements The provision of industrial handrails in platforms, catwalks, walkways and staircases is a safety measure that is highly recommended. The initial cost ofhandrails is more than justified by the safety that they represent. It is Zamil Steel’s policy to create products that are safe and reliable and to always advise the customers to design their buildings to meet the maximum requirements of prevailing safety standards. Therefore, itis strongly recommended that handrails be specified when ordering platforms, catwalks and staircases Industrial handrails are fabricated from 48 mm diameter pipes that are used as top rails, and from 40x40 x2 mm thick square tubes that are used for the mid-rail and for the posts of the handrail : Handrails 10f3 Office handrails are fabricated from 38.1 mm or 50.8 mm diameter tubes which are welded to ball connectors For both types a 100 mm wide 6 mm thick kicker or toe plate is welded at the base of the handrail posts to complete the whole assembly. The height ofthe post is 900 mm measured from the top of the flooring to the top face of the top rail