User’s
Manual KR180A
Dual channel recorder
IM80B12R06E
4th Edition
INTRODUCTION
Thank you for purchasing the KR180A Dual channel recorder.
To ensure that you can take full advantage of all the functions of the KR180A Dual channel
recorder and also operate the instrument correctly and efficiently, please read this User’s Manual
carefully before use.
NOTE
・YOKOGAWA reserves the right to change this manual at any time without notice.
・If you find any ambiguities or errors in this manual, please contact YOKOGAWA’s head office
or one of its branches or business offices listed on the back cover of this manual.
・No part of this manual may be reproduced or copied in any form.
REVISIONS
・First edition, issued April 1997
・3rd edition, issued May 1999
・4th edition, issued Sep 2005
IM 80B12R05-E 1
2.2 Checking Packed Contents
The KR180A Dual channel recorder is thoroughly inspected before leaving the factory.
However, when you receive the instrument, check that all accessories are present and in
the correct quantities. Also, check the external appearance of the KR180A to ensure that
no damage has occurred.
2.2.1 Checking the Accessories and the Appearance of the Instrument
The KR180A should be accompanied with the accessories indicated in Table 2.1.
Check that all of these accessories are present and in the correct quantities. Also, check
the external appearance of the KR180A to ensure that no damage has occurred.
Table 2.1 accessories
Part name Quantity Remarks
Disposable felt pen 3 red, green, blue
Plotter pen 1
1 250V 800mA time lag (AC model)
Fuse
1 250V 5A time lag (DC model )
Recording paper 1 Approx. 20m(installed in the recorder)
Table 2.2 Spare Parts
Part name Quantity Parts Number Remarks
1 B9902AM red
Disposable felt pen 1 B9902AN green
1 B9902AP blue
Plotter pen 1 B9902AR
Max. rudder angle
5 V8104AH
Recording paper = 35 or 40deg. or other
5 V8105AH Max. rudder angle 45deg.
1 A1512EF AC model
Fuse
1 A1513EF DC model
Key 2 B9900HZ For locking the panel keys
2-2