Product datasheet
OTi DALI 20/220...240/500 NFC I
OPTOTRONIC Intelligent – DALI NFC I | Compact constant current LED driver – Dimmable
Product family features
_ Supply voltage: 220…240 V
_ Line frequency: 0 Hz, 50…60 Hz
_ Line voltage: 198…264 V
_ According to EN 61347-1, 61347-2-13, 62384
_ RI suppression: to EN 55015/CISPR 15
_ Immunity according to EN 61547
_ Type of protection: IP20
_ Integrated cable clamp for luminaire and independent
installation
__
Product family benefits
_ Versatile DALI window driver due to flexible output characteristic
_ Locking and unlocking of luminaire/driver data
_ Easy and fast output current setting via NFC
_ Very high efficiency
_ High-quality dimming of 1…100 % by amplitude dimming
_ DALI-2 certified incl. Parts 251, 252, 253
Areas of application
_ Suitable for downlights, spotlights and LED panels
_ Suitable for use in luminaires with flexible current setting
_ Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
_ Suitable for indoor SELV installations
_ Suitable for luminaires of protection classes I and II
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 1 of 8
Product datasheet
Technical data
Electrical data
Nominal input voltage 220…240 V
Mains frequency 0,50,60 Hz
Input voltage AC 198…264 V 1)
Input voltage DC 176…276 V
Total harmonic distortion < 10 % 2)
Power factor λ ≥ 0.95
3)
Efficiency in full-load 88 %
Inrush current < 20 A 4)
Max. ECG no. on circuit breaker 10 A (B) 20
Max. ECG no. on circuit breaker 16 A (B) 30
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage 20…50 V 5)
U-OUT (working voltage) 60 V
Nominal output current 200…500 mA 6)
Default output current 350 mA
Output current tolerance ±5 %
__
Output ripple current (100 Hz) < 5 % 7)
Output PSTLM ≤1
Output SVM ≤0.4
Nominal output power 20 W 8)
Maximum output power 20 W
Power loss in stand-by mode <0.15 W
Galvanic isolation primary/secondary SELV
Current set DALI / NFC
Galvanic isolation DALI/mains Basic
Galvanic isolation DALI/output SELV
Networked standby power ≤0.18 W 3)
1) Permitted voltage range
2) At full load, 220…240 V, 50 Hz / see graphs
3) at 230 V, 50 Hz
4) t = 200 µs (measured at 50 % I )
width peak
5) Maximum 60 V
6) ±5%
7) Ripple average at 100 Hz
8) Partial load 4…20 W
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 2 of 8
Product datasheet
OTI QBM DALI 20 Operating Window OTI QBM DALI 20 Typical Efficiency vs. Load
__
OTI QBM DALI 20 Typical Power Factor vs. Load OTI QBM DALI 20 Typical THD Vs Load
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 3 of 8
Product datasheet
Dimensions & weight
Mounting hole spacing, length 186.5 mm
Product weight 160.00 g
Cable cross-section, input side 0.2…2.5 mm² 1)
Cable cross-section, output side 0.2…1.5 mm² 1)
Wire preparation length, input side 7…8 mm
Wire preparation length, output side 8.0…9.0 mm
Length 204.0 mm
Width 50.0 mm
__
Height 32.0 mm
1) Solid or flexible leads
Colors & materials
Casing material Plastic
Temperatures & operating conditions
Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 75 °C 1)
Max.housing temperature in case of fault 110 °C
Temperature range at storage -25…85 °C
Permitted rel. humidity during operation 5…85 % 2)
1) Maximum at the Tc-point
2) Maximum 56 days/year at 85 %
Lifespan
ECG lifetime 50000 / 100000 h 1)
1) T = 75°C, 0.2% / 1,000 h failure rate / T = 65°C, 0.1% / 1,000 h failure rate
c c
Additional product data
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 4 of 8
Product datasheet
Encapsulated No
Capabilities
Dimmable Yes
Dimming interface DALI-2
Dimming range 1…100 %
Dimming method Amplitude Modulation
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Intended for no-load operation No
Max. cable length to lamp/LED module 2.0 m 1)
Suitable for fixtures with prot. class I / II
Type of connection, input side Screw terminal
Type of connection, output side Push terminal
Suitable for through-wiring Yes
Suitable for emergency lighting Yes
Constant lumen function Programmable
__ Programming interface DALI, NFC
Control interface DALI-2
Number of channels 1
2)
DALI-2 Energy Data Yes
3)
DALI-2 Diagnostic Data Yes
1) Output wires must be routed as close as possible to each other
2) Acc. DALI part 252
3) Acc. DALI part 253
Programming
Box programming Yes
Tuner4TRONIC Yes
Tuner4TRONIC Field App Yes
Programming device DALI / NFC
Programmable features
Operating Current Yes
Constant Lumen Yes
Lamp Operating Time Yes
Driver Guard Yes
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 5 of 8
Product datasheet
DALI Settings Yes
Emergency Mode Yes
1)
DALI-2 Luminaire Data Yes
Configuration Lock Yes
Soft Switch Off Yes
Dim to Dark Yes
TouchDIM + Sensor No
Corridor Functionality No
OEM Key No
1) Acc. DALI part 251
Certificates & standards
Approval marks – approval CE / EL / DALI-2 / EAC
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN
55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to
EN 62384/Acc. to EN 62386/Acc. to IEC 62386-
101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC
62386-207:Ed1
Protection class II
Type of protection IP20
__ Logistical data
Commodity code 850440829000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration 18-10-2022
Primary Article Identifier 4062172114967
Candidate List Substance 1 Lead
CAS No. of substance 1 7439-92-1
Safe Use Instruction The identification of the Candidate List substance is
sufficient to allow safe use of the article.
Declaration No. in SCIP database fd8ca83a-75a8-49e2-989f-9ebc23d8424c
Download Data
File
User instruction
OPTOTRONIC LED Power Supply
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 6 of 8
Product datasheet
Certificates
OT ENEC 40038447 130722
Certificates
OT EMC 40044675 031022
Declarations of conformity
OTI DALI NFC S I CE 4169161 110222
Declarations of conformity
OTI DALI NFC S I UK DoC 4281113 110222
CAD data 3-dim
PTi 20 I CAD3PDF
CAD data 3-dim
PTi 20 I IGS
CAD data 3-dim
PTI 20 I STEP
CAD data PDF
PTi 20 I CAD2PDF
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating
conditions including dimming if applicable.
__
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive
2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this
purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal
companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and
materials are recycled.
Logistical Data
Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x Volume Gross weight
height)
4062172114967 OTi DALI Shipping carton box 428 mm x 173 mm x 121 mm 8.96 dm³ 3467.00 g
20/220...240/500 NFC I 20
The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or
more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit.
Data privacy
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 7 of 8
Product datasheet
This OSRAM driver can be configured using the Tuner4TRONIC software. This requires registering on www.myosram.com and
downloading theTuner4TRONIC software from the Internet. The Tuner4TRONIC software enables users to access and view the
operational data of a luminaire or driver via the corresponding programming interfaces. A password key (Config Lock) must be
set up in the driver via the Tuner4TRONIC software in order to control which users can access and view operational data.
Follow the instructions for password setup. To grant an external person or company rights to access or view operational data,
you can assign password keys. In this case, however, you are responsible for ensuring that the third party concerned takes
notice of the information described here. However, OSRAM can read out operating data from devices for maintenance and
service purposes even when a password key has been assigned. In individual cases, OSRAM will also use its access rights in
order to optimize or improve driver hardware and driver functions. In accordance with data privacy principles, any user of
operating data (luminaire manufacturers, third parties with access rights) must ensure that personal data (e.g. name, address,
location IDs) are only merged with the prior written consent of the person (end user) concerned. The respective user of the
operating data is responsible for providing evidence of consent.
Disclaimer
Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.
__
November 28, 2022, 10:09:41 © 2022, OSRAM GmbH. All rights reserved.
OTi DALI 20/220...240/500 NFC I Page 8 of 8
