Scribd
Upload
311 views2 pages

INVEMA KT 65 Radial Drilling Machine

This document describes an INVEMA KT 65 radial drilling machine. It has a maximum drilling capacity of 65 mm, an arm reach of 1600 mm, and an inclinable cube. The machine is made by INVEMA and is their KT 65 model radial drilling machine. It can drill holes up to 65 mm in diameter.

Uploaded by

mohsen_267
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
311 views2 pages

INVEMA KT 65 Radial Drilling Machine

This document describes an INVEMA KT 65 radial drilling machine. It has a maximum drilling capacity of 65 mm, an arm reach of 1600 mm, and an inclinable cube. The machine is made by INVEMA and is their KT 65 model radial drilling machine. It can drill holes up to 65 mm in diameter.

Uploaded by

mohsen_267
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ABFC048

Trapano INVEMA KT 65 / Radial Drilling Machine INVEMA KT 65

Marca/make INVEMA
Modello/type KT 65
Foro/hole max. 65 mm
Sbraccio/arm 1600 mm
Cubo inclinabile/cube

SIDICOM
Sede Amm/Comm.: Sede Amm/Comm.:
Via Bachelet, 20 Via Bachelet, 20 Tel. +39 049 769998 - Fax. +39 049 767778
35010 LIMENA (PD) -ITALY 35010 LIMENA (PD) -ITALY www.sidicom.it - email: [email protected]
ABFC048

SIDICOM
Sede Amm/Comm.: Sede Amm/Comm.:
Via Bachelet, 20 Via Bachelet, 20 Tel. +39 049 769998 - Fax. +39 049 767778
35010 LIMENA (PD) -ITALY 35010 LIMENA (PD) -ITALY www.sidicom.it - email: [email protected]

You might also like