Product data sheet
E 250 NT
AREAS OF APPLICATION
Smoke and heat extraction system and natural ventilation (24 V) for direct opening in the façade and roof
area
Inward- and outward opening windows with bottom-hung, top-hung and side-hung leaves as well as roof
windows
Can be used in the exhaust air and air intake
E 250 NT for dry rooms onyl, Variant E 250 NT AB for protected outdoor area (e.g. canopy)
Installation on wooden, PVC or metal windows
Compact design spindle drive with a wide area of application
AREAS OF APPLICATION
Smoke and heat extraction system and natural ventilation (24 V) for direct opening in the façade and roof
area
Inward- and outward opening windows with bottom-hung, top-hung and side-hung leaves as well as roof
windows
Can be used in the exhaust air and air intake
E 250 NT for dry rooms onyl, Variant E 250 NT AB for protected outdoor area (e.g. canopy)
Installation on wooden, PVC or metal windows
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:13Z
Product data sheet | Page 2 of 12
E 250 NT
PRODUCT FEATURES
Continuously adjustable drive stroke and individual speeds for ventilation and smoke and heat extraction
Synchronisation of max. four drives without external control unit
Easy change of mode of operation (solo and syncro, master/slave) by means of DIP switch
IQ windowdrive - intelligent drive control
Tested as a natural smoke and heat exhaust ventilation device (SHEV) in accordance with EN 12101-2
TECHNICAL DATA
Productname E 250 NT
Available stroke length 100 mm, 150 mm, 200 mm, 230 mm, 300 mm, 500 mm, 750 mm, 1000
mm
Opening speed RWA 5.7 mm, stroke 500: 9.5 mm/s
Opening speed ventilation 5 mm/s
Force of pressure (max.) 750 N
Holding force (max.) 2000 N
Compressive force 750 N
Tensile force 750 N
Voltage at operation 24 V ± 25 %
operating voltage 24 V DC
Current consumption 1.3 A
Current consumption according to area of application Ventilation (24 V): 0.9 A; RWA (18 V): 1.0 A Stroke 500: Ventilation (24 V):
1.1 A; RWA (18 V): 1.3 A
Power consumption 20 W
Duty rating 30 %
Connection cable length 2m
Special length of power supply cable 5 m, 7.5 m
Min. core cross section 0.75 mm²
Number of cables 4 cores
Service temperature -5 - 70 °C
IP rating IP65
protection rating III
Synchronising function Yes
Additional locking available Yes
Type of additional locking mechanism Locking drive
Type of stroke shortening Synchronising unit, Factory setting
End position cut-off extended electronic, via internal path sensor
End position cut-off retracted electronic, via path and load
Overload cut-off Yes
Complete opening within 60 s yes, up to 500 mm stroke
SHEV tested Yes
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:14Z
Product data sheet | Page 3 of 12
E 250 NT
SHEV additional information yes, up to 500 mm stroke
Number synchronisation drive units 4
KNX ability Yes
Bottom-hung window INWARD-opening frame installation Yes
Bottom-hung window INWARD-opening leaf installation Yes
Bottom-hung window OUTWARD-opening frame Yes
installation
Side-hung window INWARD-opening frame installation Yes
Side-hung window INWARD-opening door leaf installation Yes
Side-hung window OUTWARD-opening frame installation Yes
Top-hung window INWARD-opening frame installation Yes
Top-hung window INWARD-opening leaf installation Yes
Top-hung window OUTWARD-opening frame installation Yes
OUTWARD-opening roof window Yes
NETWORKING
VARIANTS / ORDER INFO
operating
Designation Description Ident-No. Colour Stroke voltage
E 250 NT 146657 according to 200 mm 24 V DC
RAL
E 250 NT - special Can be configured: Stroke, cable length, colour, 146676 according to 24 V DC
version variant E 250 NT AB RAL
E 250 NT 146659 white RAL 9016 230 mm 24 V DC
E 250 NT 146665 white RAL 9016 500 mm 24 V DC
E 250 NT 146672 according to 750 mm 24 V DC
RAL
E 250 NT 146661 EV1 300 mm 24 V DC
E 250 NT 146674 white RAL 9016 1000 mm 24 V DC
E 250 NT 146671 white RAL 9016 750 mm 24 V DC
E 250 NT 146670 EV1 750 mm 24 V DC
E 250 NT 146673 EV1 1000 mm 24 V DC
E 250 NT 146651 according to 100 mm 24 V DC
RAL
E 250 NT 146662 white RAL 9016 300 mm 24 V DC
E 250 NT 146664 EV1 500 mm 24 V DC
E 250 NT 146660 according to 230 mm 24 V DC
RAL
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:14Z
Product data sheet | Page 4 of 12
E 250 NT
operating
Designation Description Ident-No. Colour Stroke voltage
E 250 NT 146653 white RAL 9016 150 mm 24 V DC
E 250 NT 146663 according to 300 mm 24 V DC
RAL
E 250 NT 146655 EV1 200 mm 24 V DC
E 250 NT 146500 white RAL 9016 100 mm 24 V DC
E 250 NT 146658 EV1 230 mm 24 V DC
E 250 NT 146656 white RAL 9016 200 mm 24 V DC
E 250 NT 146675 according to 1000 mm 24 V DC
RAL
E 250 NT 146652 EV1 150 mm 24 V DC
E 250 NT 146499 EV1 100 mm 24 V DC
E 250 NT 146654 according to 150 mm 24 V DC
RAL
E 250 NT 146666 according to 500 mm 24 V DC
RAL
ACCESSORIES
ADAPTER FOR BRACKET E 250 NT NSK-S
For installation of the E 250 NT spindle drive on Schüco roof windows
Designation Description Ident-No. Colour
Adapter for bracket E 250 NT suitable for installation on the secondary closing edge of roof windows 138370 EV1
NSK-S (Schüco AWS57 RO)
EYE BOLT E 250 NT DRM *
For installation of the E 250 NT spindle drive
Designation Description Ident-No. Colour
Eye bolt E 250 NT DRM * suitable for installation on the secondary closing edge of roof windows 138368 silver-coloured
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:14Z
Product data sheet | Page 5 of 12
E 250 NT
ROTATING BRACKET E 250 NT NSK *
For roof window installation of the E 250 NT spindle drive
Designation Description Ident-No. Colour
Rotating bracket E 250 NT with eye bolts and bracket mount suitable for installation on the secondary 138367 silver-
NSK * closing edge of roof windows coloured
ROTATING BRACKET E 250 NT
For roof window installation of the E 250 NT spindle drive
Designation Description Ident-No. Colour
Rotating bracket E 250 NT With eye bolts and leaf bracket 116114 according to RAL
Rotating bracket E 250 NT With eye bolts and leaf bracket 116112 EV1
Rotating bracket E 250 NT With eye bolts and leaf bracket 116113 white RAL 9016
BRACKET INWARD OPENING E 250 NT / E 350 N
For installation of the E 250 NT and E 350 N spindle drives
Designation Description Ident-No. Colour
Bracket INWARD OPENING E 250 NT / E 350 N With eye bolts and leaf bracket 027223 white RAL 9016
Bracket INWARD OPENING E 250 NT / E 350 N With eye bolts and leaf bracket 027222 according to RAL
Bracket INWARD OPENING E 250 NT / E 350 N With eye bolts and leaf bracket 027218 EV1
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:15Z
Product data sheet | Page 6 of 12
E 250 NT
STANDARD BRACKET E 250 NT / E 350 N
For installation of the E 250 NT and E 350 N spindle drives
Designation Description Ident-No. Colour
Standard bracket E 250 NT / E 350 N With eye bolts and leaf bracket 020879 white RAL 9016
Standard bracket E 250 NT / E 350 N With eye bolts and leaf bracket 019032 EV1
Standard bracket E 250 NT / E 350 N With eye bolts and leaf bracket 020878 according to RAL
BRACKET E 250 NT NSK
For roof window installation of the E 250 NT spindle drive
Designation Ident-No. Colour
Bracket E 250 NT NSK 138369 silver-coloured
LEAF BRACKET E 1500 HSK HE *
For roof window installation of the E 1500 N, E 250 NT and E 350 N
spindle drives
Ident-
Designation Description No. Colour
Leaf bracket E 1500 suitable for installation on the main closing edge of roof windows (Heroal 85 D), can 136190 EV1
HSK HE * also be used for E 250 NT / E 350 N
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:15Z
Product data sheet | Page 7 of 12
E 250 NT
LEAF BRACKET E 1500 NSK A-HU *
For roof window installation of the E 1500 N and E 250 NT spindle drives
Ident-
Designation Description No. Colour
Leaf bracket E 1500 suitable for installation on the secondary closing edge of roof windows (Alcoa AA 100, 136189 EV1
NSK A-HU * Hueck VF 50/60), can also be used for E 250 NT
LEAF BRACKET E 1500 NSK HE *
For roof window installation of the E 1500 N and E 250 NT spindle drives
Designation Description Ident-No. Colour
Leaf bracket E 1500 NSK suitable for installation on the secondary closing edge of roof windows (Heroal 85 D), 136188 EV1
HE * also suitable for E 250 NT
LEAF BRACKET E 1500 NSK W-HU *
For roof window installation of the E 1500 N and E 250 NT spindle drives
Ident-
Designation Description No. Colour
Leaf bracket E 1500 suitable for installation on the secondary closing edge of roof windows (Wicona WT 136187 EV1
NSK W-HU * 50/60, Hueck 85 E), can also be used for E 250 NT
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:15Z
Product data sheet | Page 8 of 12
E 250 NT
LEAF BRACKET E 1500/ E 3000 NSK AP *
For roof window installation of the E 1500 N, E 1500 S, E 3000 and E 250
NT spindle drives
Ident-
Designation Description No. Colour
Leaf bracket E 1500/ E suitable for installation on the secondary closing edge of roof windows (Aluprof 140713 EV1
3000 NSK AP * MB-SR50), can also be used for E 250 NT
SAFETY SCISSORS NO. 35
For protection of bottom-hung leaves
Designation Description Ident-No. Colour
Safety scissors no. 35 Fix pack available from stock (10 pieces), minimum leaf height 300mm 014499 galvanised
SAFETY SCISSORS NO. 60
For protection of bottom-hung leaves
Designation Description Ident-No. Colour
Safety scissors no. 60 Fix pack available from stock (10 pieces), minimum leaf height 700mm 133814 galvanised
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:16Z
Product data sheet | Page 9 of 12
E 250 NT
SERVICE CASE IQ WINDOWDRIVE
For commissioning and parameter setting of the window drives from the
IQ windowdrive range
Ident- Supply
Designation Description No. Colour voltage
Service case GEZE IQ for commissioning of 24 V window drives and for parameter 142586 silver- 100 - 240
windowdrive setting of the IQ windowdrive drives in combination with the ST coloured V AC
220
POWER SUPPLY HS
24 V power supply for top hat rail mounting
IQ GEAR
Interface for activation of the Slimchain, Powerchain and E 250 NT
window drives in ventilation mode
Designation Description Ident-No.
IQ gear Interface for activation of the Slimchain, Powerchain and E 250 NT window drives in ventilation mode 151959
IQ BOX SAFETY *
Safety module for protecting hazardous areas of power-operated
windows
Designatio Ident- Dimension operating Type of
n Description No. s voltage installation
IQ box Module for closing edge protection for window drives from the 187677 35 x 90 x 24 V DC Top hat rail
Safety * 24V IQ windowdrive series. One IQ box Safety is needed per 60 mm mounting
window (also for Syncro applications and with locking drives).
Top hat rail mounting (space needed 32 mm/2 TE)
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:16Z
Product data sheet | Page 10 of 12
E 250 NT
LEAF BRACKET E 1500/ E 3000 NSK S *
For installation of the E 1500 N, E 1500 S, E 3000 and E 250 NT spindle
drives
Designation Description Ident-No. Colour
Leaf bracket E 1500/ E suitable for installation on the secondary closing edge of roof windows 136186 EV1
3000 NSK S * (Schüco AWS57 RO)
IQ BOX KNX
Interface module to connect the Slimchain, Powerchain, E 250 NT and F
1200+ window drives in the KNX building bus
Designati Ident- Dimension
on Description No. s Type of installation
IQ box Top hat rail variant (space requirement 18mm/1 TE). One IQ 164437 18 x 98 x 62 Surface-mounted installation,
KNX box KNX is required per window (also for Syncro applications mm Flush-mounted installation
and with locking drives).
IQ box Flush mounting variant. One IQ box KNX is needed per 164443 50 x 45 x Surface-mounted installation,
KNX window (also for Syncro applications and with locking drives). 19 mm Flush-mounted installation
GEZE POWER SUPPLY NT 1.5A-24V HS
24 V power supply for top hat rail mounting
Ident- operating
Designation Description No. Colour Dimensions voltage
Power supply NT 1.5 Output voltage 24 V DC / W x H x D: 35 x 90 x 58 mm / 151425 black 35 x 90 x 58 230 V AC
A-24 V HS Installation on top hat rail, 2 division units mm
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:16Z
Product data sheet | Page 11 of 12
E 250 NT
POWER SUPPLY NT 2.5 A-24 V HS *
24 V power supply for top hat rail mounting
Ident- operating
Designation Description No. Colour Dimensions voltage
Power supply NT 2.5 Output voltage 24 V DC W x H x D: 52 x 90 x 58 mm 151424 black 52 x 90 x 58 230 V
A-24 V HS * Installation on top hat rail, 3 division units mm
POWER SUPPLY NT 6.25 A-24 V HS *
24 V power supply for top hat rail mounting
Ident- operating
Designation Description No. Colour Dimensions voltage
Power supply NT 6.25 Output voltage 24 V DC / W x H x D: 72 x 95 x 66.5 mm / 192113 grey 72 x 95 x 230 V DC +/-
A-24 V HS * Installation on top hat rail, 4 division units 66.5 mm 10%
ST 220
Service terminal for the wireless and wired parameter setting of GEZE
door and window products
Ident- operating
Designation Description No. Colour Dimensions voltage
ST 220 service For parameter setting and diagnosis for TZ 320, TE 220, 087261 blue 80 x 125 x 24 V
terminal automatic door systems, drives from the IQ windowdrive series 37 mm
and THZ N4, THZ Comfort N4, battery operation with 4x AAA cells
(not supplied by GEZE), plain text display on illuminated panel,
keypad for operation / Parameter changes to GEZE systems may
only be carried out by experts who have been authorised by the
manufacturer
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:16Z
Product data sheet | Page 12 of 12
E 250 NT
NT 2.5 A-24 V SM DIR POWER SUPPLY
24 V power supply for surface-mounted installation with integrated
direction control/polarity reversal
Ident- operating
Designation Description No. Colour Dimensions voltage
NT 2.5 A-24 V SM Output voltage 24 V DC / W x H x D: 200 x 50 x 25 mm / 195293 grey 200 x 50 x 230 V AC
DIR power supply Surface-mounted installation / With integrated direction 25 mm
control/polarity reversal
* The products designated above may vary in form, type, characteristics, function, or availability depending on the country.
Please get in touch with your GEZE contact person if you have any questions.
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2023-01-03T03:55:17Z
