Scribd
Upload
41 views2 pages

Rod Anodes 00

3C Corrosion Control Company manufactures mixed metal oxide (MMO) rod anodes for cathodic protection using a titanium substrate coated with IrO2/RuO. The standard rods are available in diameters from 1/8" to 1" and can operate in soils, backfills, fresh water, brackish water, and seawater. Strict quality control ensures proper coating adhesion and loading to produce a durable anode with an extremely low consumption rate and a five-year product warranty.

Uploaded by

ali sol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views2 pages

Rod Anodes 00

3C Corrosion Control Company manufactures mixed metal oxide (MMO) rod anodes for cathodic protection using a titanium substrate coated with IrO2/RuO. The standard rods are available in diameters from 1/8" to 1" and can operate in soils, backfills, fresh water, brackish water, and seawater. Strict quality control ensures proper coating adhesion and loading to produce a durable anode with an extremely low consumption rate and a five-year product warranty.

Uploaded by

ali sol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Rod Anodes

Rod Anodes.Rev 00 2012

3C Corrosion Control Company Page 1 of 2 Tel: +46 418 411 900


Stationsplan 5, Box 72 Telefax: +46 418 411 935
268 03 Billeberga, Sweden E-mail: [email protected]
Rod Anodes
3C Corrosion Control Company AB manufactures Electrolyte Max current density*
Mixed Metal Oxide (MMO) rod anodes for cathodic
protection. Fresh water 100 A/m²
Brackish water** 100 - 300 A/m²
The standard rod anode consists of a solid hollow
cylindrical titanium rod/tube that has been coated with Sea water 600 A/m²
MMO coating.

The titanium substrate meets ASTM Standard B348,


Grade 1 or Grade 2.

Rods anodes are available in standard diameters of


1/8”, 1/4”, 1/2” and 1”. Other sizes and current ratings
are available upon request.

The MMO coating applied to the titanium rod has been


designed for use in all cathodic protection applications.
The coating consists of IrO2/RuO. MMO coating is gen-
erally accepted by the cathodic protection industry to
be satisfactory for both chlorine and oxygen evolving
electrolytes.

Based on accelerated life testing conducted by an


independent laboratory, the coating has proven to be
superior or equivalent to other MMO coatings currently
being used. A copy of this test report is available upon
request.

Strict quality control procedures are followed through-


out the coating process to insure proper coating ad-
hesion and Ioading. Production of a quality product
makes every step of the manufacturing process funda-
mental.

MMO anodes have an extremely low consumption


rate. The titanium substrate remains constant throug-
hout the design life of the anode.
* Coating loadings can be increased or decreased
depending on particular life/current density require-
The anode house is made of uPVC and the cable can
ments.
be terminated in both radial and axial direction.
** Current density should be determined in accor-
The 3C rod anode is suitable for operations in soils,
dance with fresh water resistivity.
carbonaceous backfill, fresh water, brackish water and
seawater. The rod anodes have the following operating Copies of the five years product warranty are availab-
characteristics for standard coating loadings: le upon request.
Rod Anodes Rev 00 2012

3C Corrosion Control Company Page 2 of 2 Tel: +46 418 411 900


Stationsplan 5, Box 72 Telefax: +46 418 411 935
268 03 Billeberga, Sweden E-mail: [email protected]

You might also like