Scribd
Upload
1K views1 page

Lidl - Timer - Possible Manual For Powerfix Timer

The document provides instructions for setting the time and programming schedules on a Powerfix timer. It explains how to install batteries, set the clock time by selecting hours, minutes and AM/PM, and program on and off times for up to 20 schedules by selecting days, hours and minutes for each and confirming with the PGM button. Once all schedules are set, pressing the Mode button until the clock is shown exits programming mode and prepares the timer for operation.

Uploaded by

Enco Vareni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Lidl - Timer - Possible Manual For Powerfix Timer

The document provides instructions for setting the time and programming schedules on a Powerfix timer. It explains how to install batteries, set the clock time by selecting hours, minutes and AM/PM, and program on and off times for up to 20 schedules by selecting days, hours and minutes for each and confirming with the PGM button. Once all schedules are set, pressing the Mode button until the clock is shown exits programming mode and prepares the timer for operation.

Uploaded by

Enco Vareni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

http://waterheatertimer.org/Woods-timers-and-manuals-old.

html#N1564

Possible manual for Powerfix timer


European 230volt probably uses clock hours 1 thru 24
Install 2 AAA batteries, or if timer does not have batteries, then
plug timer in for about 1 hour.

Set the time clock:


Enter clock setting mode
Press Mode button until ‘clock setting’ appears.
Day select with Day button
Hour select with Hour button
Minute select with Min button
Press PGM button To confirm current clock time
Press S/W button while in clock mode to toggle between Daylight savings time DST and sun icon
appears on display.

Program settings:
Press Mode button until ‘program 1-20’ displays, or press Prg button to enter programming.

Repeatedly press Prg button to cycle through programming.


Each program must have ON time, and then OFF time

Press Pgm button until display shows: Prg Set ON 1. This is program1 ON.
Day select with Day button
Hour select with Hour button
Minute select with Min button
Press PGM button To confirm program1 ON

Press Pgm button until display shows: Prg Set OFF 1. This is program1 OFF.
Day select with Day button
Hour select with Hour button
Minute select with Min button
Press PGM button To confirm program1 OFF

Press Pgm button until display shows: Prg Set ON 2. This is program2 ON.
Day select with Day button
Hour select with Hour button
Minute select with Min button
Press PGM button To confirm program2 ON

Repeat steps for up to 20 programs.

Exit programming mode, press Mode button until ‘clock’ shows.


Timer is ready for operation.

You might also like