Scribd
Upload
99 views1 page

Polyaluminium Chloride Coagulant

This product data sheet provides information on Polyaluminium Chloride, a superior coagulant called VIKRAM/KANPAC 10 that is useful for purifying neutral raw water without adding alkaline aids. It is formulated from 100% inorganic compounds and offers a unique alternative to conventional coagulants. It works effectively over a wide range of turbidity and in cold water. The product comes as a liquid or powder and is used to purify drinking water and in industrial water treatment.

Uploaded by

nirav mak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views1 page

Polyaluminium Chloride Coagulant

This product data sheet provides information on Polyaluminium Chloride, a superior coagulant called VIKRAM/KANPAC 10 that is useful for purifying neutral raw water without adding alkaline aids. It is formulated from 100% inorganic compounds and offers a unique alternative to conventional coagulants. It works effectively over a wide range of turbidity and in cold water. The product comes as a liquid or powder and is used to purify drinking water and in industrial water treatment.

Uploaded by

nirav mak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Data Sheet

Grasim Industries Limited-Chemical Division

POLYALUMINIUM CHLORIDE-ARYA PAC/KANPAC 10


Superior Coagulant useful for neutral raw water purification without alkaline aids

VIKRAM/KANPAC Polyaluminium Chloride is Product Properties:


formulated by 100% inorganic compound. It offered
Form Liquid Powder
unique alternative to conventional coagulant. It is
Aluminium as Al2O3, % min 10.2 28
premium product which useful for low alkalinity as
Chloride as Cl-, %, max 10.5 33
well neutral pH raw water treatment without adding
alkali aids. Quickly Neutralized anionic charged SP GR @ 25 °C, min 1.20 -
colloidal particle and provide pure drinking water. Bulk Density, gm/ml, min - 0.65
Sulphate as SO4--, % , max 2.5 10
Features & benefits:
Basicity, %, min 64 64
• No alkali aid needed pH @ 5% solution 2.5 – 4.5 2.5 – 4.5
• More effective, economical and eco-friendly over
conventional coagulants such as Alum Guideline Usage:
• Fast and dense flocs formation that easily Dosage vary from 5 - 200 ppm for water purification
dewaterable for potable use. Please contact GRASIM for more
• Effective at wide range of turbidity & effectively detail and Technical Assistance.
worked in cold water
Packaging & Shipping:
• Stable and generate less ionic load in treated
water Liquid - Bulk shipment in MSRL road tankers/ 250 kg
• Low residual aluminum carry forward HM-HDPE drums
• Lower solids generation Powder- 25 kg woven bags with double liner/ 750 kg
Application & Usage: jumbo bags.

• Drinking Water Treatment Handling & Storage:


• Industrial Water Treatment Avoid prolonged contact with skin. In case of skin or
eye contact, flush exposed area with large amounts of
Liquid product used stand-alone as well doing dilution
water.
as per requirement
Stored in cool and dry place under shade to avoid
Powder used by making the solution. Solution of 10%
direct sunlight. Storage tank should be FRP, HDPE,
& 18% Al2O3 content prepared by dissolving 1:2 and
acid proof tile-lined concrete tank & rubber lined MS
1.5:1 ratio of powder to water respectively.
tank. Bags/Drum tightly closed when not in use.
Certification:
For more information please refer safety data sheet.
IS 15573:2018 /NSF-ANSI 60 / REACH / HALAL. Available upon request.

Visit us online at www.grasim.com Customer Service


Grasim Industries Limited-Chemical Division Phone: +91 22 24399132
Birla Aurora, 10th Floor, AB Rd Email: [email protected]
Worli, Mumbai-400030

You might also like