Scribd
Upload
97 views1 page

Metalcor 1.4876 Alloy 800

Alloy 800/1.4876 is an austenitic heat resistant nickel-iron-chromium alloy with good resistance to reducing, oxidizing and nitriding atmospheres. It has metallurgical stability in long-term application at high temperatures up to 1100°C and can be used for furnaces and furnace components in the oil industry.

Uploaded by

tonicmira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views1 page

Metalcor 1.4876 Alloy 800

Alloy 800/1.4876 is an austenitic heat resistant nickel-iron-chromium alloy with good resistance to reducing, oxidizing and nitriding atmospheres. It has metallurgical stability in long-term application at high temperatures up to 1100°C and can be used for furnaces and furnace components in the oil industry.

Uploaded by

tonicmira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

4876 ALLOY 800

Brand name INCOLOY® Alloy 800, Nicrofer® 3220 H

Trade name Alloy 800

Standards
Material No. EN Designation UNS Alloy

1.4876 X10CrNiAlTi32-21 N08800 800

Description Alloy 800 / 1.4876 is an austenitic heat resistant nickel-iron-chromium alloy.

Special properties Good resistance to reducing, oxidizing and nitriding atmospheres. Metallurgical stability in long-term application at
high temperatures.

Chemical Composition
C Si Mn P S
% ≤% ≤% ≤% ≤%

≤ 0.12 1.00 2.00 0.03 0.015

Cr Ni Ti Al
% % ≤% %

19.0-23.0 30.0-34.0 0.15-0.60 0.15-0.60

Mechanical Properties
Hardness HB 30 0.2% Yield strength Rp Tensile strength Rm Elongation A5 Resistant on air up to
20°C ≤ HB ≥ N/mm² N/mm² ≥% °C

192 170 450-680 30 1100

Modulus of elasticity
kN/mm²

194

Physical Properties 20°C


Density Specific heat capacity Thermal conductivity Electrical resistivity
g/cm³ J/kg K W/m K Ω mm²/m

8 550 12 1

Suitable welding 2.4806; 2.4648


filler materials

Application Furnaces and furnace components, oil industry

Available forms for 1.4876 Forged / cast Finished part


/ ALLOY 800 Sheets/Plates Bars Wire Tubes/Pipes Fittings
parts (drawing)

© Metalcor GmbH | Heidhauser Str. 89a | D-45239 Essen | Germany


Tel. +49 (201) 310 77 52 | Fax +49 (201) 310 77 47 | [email protected] | www.metalcor.de
All data is without guarantee for correctness/completeness and serves only for consultation. The data sheets do not constitute a legal contract.
A liability for any data as well as the result in processing and application is excluded.

You might also like