The WZA-N series
OEM weigh cells
OEM weigh cells
WZA8202-N
Outstanding features:
The WZA-N series is the successor of the well Model WZA... 8202-N
established WZA-line. This series focus on Capacity 8200 g
weighing resolutions as low as 0.1 mg and
capacities of up to 8200 g. Readability 10 mg
The weigh cell consist of two parts:
A monolithic weighing system in
stainless steel IP44 housing
Aluminium electronic box, all
connection via the front
- Force compensation technology weighing
system with a resolution of 10 mg
- Excellent weighing technology bundled
with easy adaptation
- Adjustable load receptor with overload
protection, optional lift-off protection
- Possibility for under floor weighing
- Interconnection on electronic front panel
- LED´s to control power and data transfer
- Fast warm-up by separation of weighing
system and electronics
- RS232C interface for configuration and
data transfer
- Optional PC-software or display to handle
weighing data and configuration
- Display can be plugged in and out during
operation
WZA8202-N
Dimensions in mm
3m
3m
Technical Data
Model WZA8202-N
Capacity 8200 g
Readability 10 mg
1)
Preload 1300 g
2)
Repeatability (standard deviation) ≤± 10 mg
Linearity ≤± 20 mg
2)3)
Measuring time 0.6 s / ± 10 mg
Operating temperature range +10 .… +30 °C
Allowable temperature range +5 .... +40 °C
Weigh cell dimension 68 x 200 x 129 mm (base x height)
Electronic / PCB dimension 130 x 208 x 45 mm (base x height)
Load receptor 64 mm (diameter), 31 mm height above housing
(adjustable, with overload protection)
Under floor load receptor M3 thread
Cable length weigh cell to electronics 3m
Power supply TNG11-2 UNI / 6971993, 115/230 VAC, +15 ... – 20%, 48-60 Hz
Power supply (alternative) 12…26, optimal 15V (+15% -10%); 0.5VPP (Peak to Peak)
Power consumption 8 VA (average)
Interface RS232C, software / hardware handshake; No system power via RS232 connector
Options / Accessories
Windows configuration software for test and Sartorius CAS Suite
adjustment
Liquid-crystal display YAC01ED
Sartorius Weighing Technology GmbH 1) the preload can be configured by using the Sartorius CAS Suite software;
Weender Landstrasse 94-108 higher preload will reduce the weighing range
2) depending on measurement equipment set-up and conditions;
37075 Goettingen, Germany 3) measuring time is the time in which the measured value is in the given range
around the static end value; test weight is approx. 25% of the weighing range
Phone +49.551.308.0
Fax : +49.551.308.3502
Specifications are subject to change without notice.
www.sartorius-mechatronics.com Version: 2.0
