MATERIAL SAFETY DATA SHEET
S80
___________________________________________
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Sorbitan monooleate
Manufacturer:
Gianergy (Singapore) Pte Ltd.
Add.: Room 4207A, No. 3539 Dongfang Road, Pudong, Shanghai, China
For information, call: 020-87568805
For emergencies, call: 020-85519649
___________________________________________
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Chemical Name CAS# EC# %
Sorbitan monoleate 1338-43-8 215-665-4 ~100
___________________________________________
SECTION 3 - HAZARDS IDENTIFICATION
Eye contact: Unlikely to cause eye irritation in man.
Skin contact: Unlikely to cause skin irritation in man.
Inhalation: Unlikely to be hazardous by inhalation.
Ingestion: This material is not likely to cause irritation upon ingestion.
Low oral toxicity, but ingestion may cause irritation of the gastrointestinal tract.
___________________________________________
SECTION 4 - FIRST AID MEASURES
Eyes: Immediately rinse eyes with running water for 15 minutes. If irritation develops, get
medical attention.
Skin: Wash affected areas with soap and water. Remove and launder contaminated clothing
before reuse. If irritation develops, get medical attention.
Ingestion: Wash out mouth with water and induce vomiting. If the patient is conscious, give water
to drink. If the patient feels unwell , seek medical attention.
Inhalation: Move to fresh air. If necessary, get immediate medical attention.
___________________________________________
SECTION 5 - FIRE FIGHTING MEASURES
Extinguishing Media: Use water, dry extinguishing media, carbon dioxide (CO2) or foam.
1
Fire Fighting Procedures: Firefighters should be equipped with self-contained breathing apparatus
and turn out gear.
___________________________________________
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.
Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.
Spills/Leaks:
Spills should contained in suitable containers. Do not entry into water way and drains
Additional information:
See Section 7 for information on safe handing
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
___________________________________________
SECTION 7 - HANDLING and STORAGE
Handling: No special precautions are necessary if used correctly.
Storage: storage in dry conditions in room temperature. And keep away from oxidizing agents and
ignition sources.
___________________________________________
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Exposure limit values
Chemical name Exposure limit values Notes
No Workplace Exposure Limit Assigned.
Engineering measures: Provide adequate ventilation.
Eye protection: Safety glasses with side shields.
Skin protection: Good working practice suggests gloves should be worn.
Respiratory protection: is not required if good ventilation maintained
Other: Eyewash and safety shower easily accessible to the work area.
___________________________________________
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical state and appearance: Liquid.
Odor: Not available.
Taste: Not available.
Molecular Weight: 428.61 g/mole
Color: Amber. Yellow.
PH (1% sol/water): Not applicable.
Boiling Point: >100°C (212°F)
2
Melting Point: Not available.
Critical Temperature: Not available.
Specific Gravity: 0.98 (Water = 1)
Vapor Pressure: Not available.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff. : Not available.
Ionicity (in Water): Not available.
Dispersion Properties: Dispersed in water.
Solubility:
Very slightly soluble in diethyl ether.Insoluble in cold water, acetone. Soluble in most mineral,
vegetable oils, ethyl acetate, cottonseed oil. Insoluble in ethylene glycol, propylene glycol. Slightly
soluble in low alcohols, diethyl ether, 1,4-dioxane, 1,1,1-trichloroethylene.
___________________________________________
SECTION 10 - STABILITY AND REACTIVITY
Stability: Stable under normal conditions.
Materials to avoid: Strong oxidising agents.
Conditions to avoid: None known
Hazardous decomposition products: None known
Hazardous polymerisation: Will not occur
___________________________________________
SECTION 11 - TOXICOLOGICAL INFORMATION
Acute toxicity: LD50 ＞31g/kg （rat oral
Sensitization: No effects known.
Carcinogenicity: No effects known
___________________________________________
SECTION 12 - ECOLOGICAL INFORMATION
General notes:
Do not allow material to be released to the environment without proper governmental permits.
___________________________________________
SECTION 13 - DISPOSAL CONSIDERATIONS
Product:
Recommendation: Consult state, local or national regulations to ensure proper disposal.
Uncleaned packages:
Recommendation: Disposal must be made according to official regulations.
___________________________________________
SECTION 14 - TRANSPORT INFORMATION
Not a hazardous material for transportation
Label Required: N/A
Placard Required: N/A
Poison Constituent:N/A
3
___________________________________________
SECTION 15 - REGULATION
Not Classified as Dangerous for Supply/Use.
___________________________________________
SECTION 16 – OTHER INFORMATION
Employers should use this information only as a supplement to other information gathered by them,
and should make independent judgement of suitability of this information to ensure proper use and
protect the health and safety of employees. This information is furnished without warranty, and any
use of the product not in conformance with this Material Safety Data Sheet, or in combination with
any other product or process, is the responsibility of the user.
Reported by: GIANERGY (GIANERGY) PTE LTD. Date: 01/01/2020
___________________________________________
4
