Hazard-Gard EVLLA Cl. I, Div.

1, Groups B, C, D
Cl. II, Groups E, F, G
UL Listed
CSA Certified 2L
explosionproof LED luminaires Cl. III & Simultaneous
Presence
Wet Locations
NEMA 4X; IP66
Class I, Division 1 factory sealed LED
luminaire for general illumination
The hazardous rated Hazard-Gard® EVLLA LED luminaire is used for general lighting in areas

2L
where flammable or explosive vapors or gases are present.

Equivalent
Nominal HID Typical energy
Model lumens WattsA luminaire savings / lifetime
EVLLA5L 6,200 59 100W-150W
EVLLA7L 7,600 69 150W-175W 62% energy savings and
EVLLA9L 8,700 81 175W-250W over 60,000 hours of
EVLLA11L 12,000 115 250W-320W continuous operation
EVLLA13L 13,000 130 320W-400W

Applications: Certifications and

•  For areas with mounting heights of up to compliances:
30 feet NEC/CEC:
• Oil and gas refineries, drilling rigs, • Class I, Division 1, Groups B, C, D
petrochemical facilities, food and beverage
• Class II, Groups E, F, G
facilities, platforms, loading docks, LED system:
tunnels, outdoor wall and stanchion • Class III, Simultaneous Presence
mounted general area lighting, and where •  Cool white (5000K), CRI 70
• Wet locations, NEMA 4X, IP66
flammable vapors, gases, ignitable dusts, •  Neutral white (4000K), CRI 70
fibers or flyings are present UL standards:
• Warm white (3000K), CRI 80
• Locations requiring continuous and • UL844; UL1598; UL1598A
• Array complies with requirements of
consistent light levels in extreme ambient CSA standard: LM79 and LM80
temperatures • CSA C22.2 No. 137
• Where extremely corrosive, wet, dusty,
hot and/or cold conditions exist Photometrics:
• NEMA 4X, marine, wet locations and hose
Standard materials: •  Refer to www.eaton.com (under the
down environments •  Body and mounting modules – copper-free Resources tab of each product family) for
aluminum with Corro-free epoxy powder specific photometric IES files
• Classified and hazardous locations coat
• Lens – shatter-resistant, explosionproof
Features: glass
•  Quick-connect design – install and wire • Gaskets – silicone
the mounting module, then simply screw • Guard – stainless steel
in the luminaire
• External hardware – stainless steel
• Factory sealed – no external sealing
fittings required in Groups B, C and D • Factory sealedB
• Adapter available for connection to
existing Hazard-Gard EVI, EVLP and EVM Electrical ratings:
modules
• Energy-efficient – up to 62% reduction All models
in energy used versus equivalent HID Voltage range, VAC 120-277 THD <15%
fixtures Frequency 50/60 Hz Power factor >0.90
• 60,000 hours rated life – eliminates need
for frequent lamp replacement UNV1 5L 7L 9L 11L 13L
• 6kV surge protection Input power (watts) 59 69 81 115 130
• Shock- and vibration-resistant solid state Input amps at 120-277 VAC 0.49 - 0.22 0.58 - 0.26 0.68 - 0.30 0.96 - 0.43 1.08 - 0.48
luminaires have no filaments or glass Maintained lumens 6,200 7,600 8,700 12,000 13,000
components that could break – greatly
reduces the risk of premature failure UNV34 5L 7L 9L 11L 13L
• T6 temperature rating Input power (watts) 49 68 80 104 128
• 5 year fixture warranty Input amps at 347-480 VAC 0.15 - 0.11 0.20 - 0.15 0.23 - 0.17 0.30 - 0.23 0.37 - 0.28
Maintained lumens 5,500 7,600 9,000 11,000 13,300

Operating ambient
temperature:
• -25ºC to 65ºC (5L-9L models);
-25ºC to 55ºC (11L and 13L models)

AUNV1 at 120 VAC.

BRefer to installation and maintenance sheet for external seal requirements.

www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2022 Eaton 49

 Hazard-Gard EVLLA Cl. I, Div. 1, Groups B, C, D
Cl. II, Groups E, F, G
UL Listed
CSA Certified 2L
explosionproof LED luminaires Cl. III & Simultaneous
Presence
Wet Locations
NEMA 4X; IP66
Class I, Division 1 factory sealed LED
luminaire for general illumination
Designed for hazardous areas. Hazard-Gard EVLLA LED luminaires are engineered to stand up to the demanding
2L

conditions faced in Class I, Division 1 environments. The rugged design and efficient heat dissipation stands up to
challenging conditions while delivering long life and high lumen performance.

Factory sealed Rugged design

• No external sealing fittings required in Groups • The LED housing is constructed of durable die cast
B, C and D aluminum, providing an efficient thermal path to the heat
sink assembly
• Impact-resistant lens is sealed from the outside
environment and provides ingress protection against
water and dust
• Multi-die LEDs are used to provide energy-efficient, long
life white light

Robust heat sink

• Heat sink designed to perform in high ambient
temperatures up to +65°CC and as low as
-25°C
• Thick walled castings make for a tough,
rugged housing that keeps the internal driver
and LED temperature down

Easy installation and replacement

Optional color temperatures • Contractor-friendly design is ideal for both
• Warm, neutral or cool white retrofit and new construction applications
color temperatures available • Installed using the same mounting modules as
existing Hazard-Gard luminaires
• Quick-connect design facilitates installation –
install and wire the mounting module, then
screw in your luminaire; two start Acme
threads ease and reduce installation time

CEVLLA5L-EVLLA9L models.

50 www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2022 Eaton

Hazard-Gard EVLLA Cl. I, Div. 1, Groups B, C, D
Cl. II, Groups E, F, G
UL Listed
CSA Certified 2L
explosionproof LED luminaires Cl. III & Simultaneous
Presence
Wet Locations
NEMA 4X; IP66
Class I, Division 1 factory sealed LED
luminaire for general illumination
Ordering information:

2L
Part number example
EVLLA5LCA21-UNV1-S812

EVLLA 5L C A 2 1 -UNV1 -S812

Lamp / function Options

5L 6,200 lumen LED S812 Trunnion mount kit

7L 7,600 lumen LED
Voltage
9L 8,700 lumen LED
11L 12,000 lumen LED
UNV1 120-277 VAC, 50/60 Hz

13L 13,000 lumen LED

UNV34 347-480 VAC, 50/60 Hz

Guard
Color temperature

C Cool (5000K)
0 No guard

N Neutral (4000K)
1 Stainless steel

W Warm (3000K)
Hub size

Mounting style
BLANK Mounting module adapter or no mounting module
2 ¾“ NPT (pendant, ceiling and wall mount only)
BLANK Mounting module adapter or no mounting module
3 1" NPT (pendant, ceiling and wall mount only)
A Pendant EVSP
5 1½" NPT (stanchion mount only)
BX Wall bracket EVSW
25 25mm (pendant, ceiling and wall mount only)
CX Ceiling mount EVSC
32 32mm (pendant, ceiling and wall mount only)
J Stanchion mount EVSJ
MD Mounting module adapter EVSA
Accessories (ordered separately):
Description Cat. #
• Stainless steel guard................................................................... P71

Dimensions: Family tree:

Pendant Ceiling EV87
EVMP2 EV22 EVJ2
EVMJ4 EVMP3 EV33
EV22
[80.2]
[104] [91.3]
4.09 3.59
3.16 EV33

[366.2] [391.6] [334.5] [342.4] [367.8]

13.17
14.42 15.42 13.48 14.48 EVSJ5 EVSA

EVSC2 EVSC25
EVSW2 EVSP2
EVSC3 EVSC32
EVSW3 EVSP3
EVSW25 EVSP25
[404.8]
[414.4] Ø 16
[414.4] EVSW32 EVSP32
Ø 16.32
Ø 16.32

nEVLL only available with ceiling mount.

Stanchion Wall Trunnion

[241.5]
9.51

25° [345.2]
13.59
[353]
[341.9] 13.90 P71
13.46
[378.4]
[407.7] 14.90
16.05

[454.6] [407.6]
17.90 Ø 16.05
[459.5]
18.09

DEVSA adapter for use with existing Crouse-Hinds series EVI, EVLP and EVM mounting modules.

www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2022 Eaton 51

 Hazard-Gard EVLLA Cl. I, Div. 1, Groups B, C, D
Cl. II, Groups E, F, G
UL Listed
CSA Certified 2L
explosionproof LED luminaires Cl. III & Simultaneous
Presence
Wet Locations
NEMA 4X; IP66
Class I, Division 1 factory sealed LED
luminaire for general illumination
Temperature performance data:
2L

Class I, II, Simultaneous

Model Max. ambient temp. °C Class I, Division 1 Class II, Divisions 1 & 2 Presence
40 T6 T6 T6
EVLLA5L 55 T6 T6 T6
65 T5 T6 T6
40 T6 T6 T6
EVLLA7L 55 T6 T6 T6
65 T5 T6 T6
40 T6 T6 T6
EVLLA9L 55 T6 T6 T6
65 T5 T6 T6
40 T6 T6 T6
EVLLA11L
55 T6 T6 T6
40 T6 T6 T6
EVLLA13L
55 T6 T6 T6

Net luminaire weights:

Model Lbs. Kg.
EVLLA5L 51.76 23.48
EVLLA7L 51.81 23.50
EVLLA9L 52.38 23.76
EVLLA11L 53.00 24.04
EVLLA13L 53.00 24.04
Add mounting modules:
Pendant 2.00 0.90
Ceiling 3.50 1.59
Wall 3.00 1.36
Stanchion 5.50 2.49
Adapter 2.00 0.90

52 www.eaton.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2022 Eaton