Scribd
Upload
770 views5 pages

NT Bosch Med17.2.2 Irom TC1797 Ford 1033

The document provides instructions for connecting the NEW TRASDATA device to an ECU. It specifies using cable F32GN037C for direct connection and ensuring the power LED is on. For boot connection, it indicates connecting the grey wire of cable F32GN037C as described. For DIMA connection, it states to connect the boot pin to pad 10 of the soldering lay-by pins and set the BOOT switch on F34DM011 to the on position.

Uploaded by

sergiorad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
770 views5 pages

NT Bosch Med17.2.2 Irom TC1797 Ford 1033

The document provides instructions for connecting the NEW TRASDATA device to an ECU. It specifies using cable F32GN037C for direct connection and ensuring the power LED is on. For boot connection, it indicates connecting the grey wire of cable F32GN037C as described. For DIMA connection, it states to connect the boot pin to pad 10 of the soldering lay-by pins and set the BOOT switch on F34DM011 to the on position.

Uploaded by

sergiorad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

NT_BOSCH_MED17.2.2_IROM_TC1797_FORD VER 02.

00

PLUGIN 618 : NEW TRASDATA

Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com- 1-
NT_BOSCH_MED17.2.2_IROM_TC1797_FORD VER 02.00

Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com- 2-
NT_BOSCH_MED17.2.2_IROM_TC1797_FORD VER 02.00

DIRECT CONNECTION
In order to connect to the ECU use the CABLE F32GN037C.
Make sure that the POWER led (red) on NEW TRASDATA is ON.
Do not use this connection for the DIMA.

ECU CONNECTOR

Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com- 3-
NT_BOSCH_MED17.2.2_IROM_TC1797_FORD VER 02.00

BOOT CONNECTION
Connect the GREY wire of the cable F32GN037C as described here below

Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com- 4-
NT_BOSCH_MED17.2.2_IROM_TC1797_FORD VER 02.00

DIMA CONNECTION
Connect the boot pin to the pad n.10 of the soldering lay-by pins then verify that the switch BOOT
present on the F34DM011 is set in position ON.

The following picture of the DIMA adapter F34DM011 connection is merely indicative.

Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com- 5-

You might also like