959 Mearns Road 5880 Bingle Road 27881 State Route 7

Warminster, PA 18974 Houston, TX 77092 Marietta, OH 45750

(W) www.TeikokuPumps.com (W) www.TeikokuPumps.com (W) www.TeikokuPumps.com
(P) (215)343-6000 (P) (713)983-9901 (P) (740)538-5332
(F) (267)486-1037 (F) (713)983-9919 (F) (740)538-5015

Quotation
29 Sep 2020

Corporacion Avicola Del Caribe Ltd Quotation number: TUS2001138

Ave Charles de Gaulle (Maranon) Revision: 0
Santo Domingo Norte

Attn: Ramon Briceno

E-mail: [email protected]

Project location: Dominican Republic

Your reference: Replacement Pump Quote - S/N PJ0052A

Thank you for your interest in Teikoku USA’s canned motor pump technology. Teikoku is the world’s largest manufacturer
and supplier of canned motor pump. Our canned motor pumps are the ideal choice for pumping refrigerants like NH3,
CO2, and Freons.

Teikoku pumps offer many features such as sealless construction, low NPSHr, stainless steel construction, precision
bearing wear monitoring and compact, simplistic design. Users benefit from lower costs, easy installation, small footprint,
maintenance free design, less protective controls required and in-field repair. The leak-proof design of canned motor
pumps is especially beneficial for environmental, safety and regulatory reasons as pumped refrigerants cannot leak to the
atmosphere. This enables users to meet all governmental and local regulations regarding emissions of refrigerants to the
atmosphere while ensuring a safer work environment in your plant or warehouse.

Teikoku USA looks forward to working with you on this project. Please do not hesitate to contact us with any questions
regarding this quotation.

Sincerely,

Tom Gasser
Application Engineer
Teikoku
Email : [email protected]
Phone : 281-846-2846

CC: Brian Dudley / Teikoku USA

Page 1 of 9
959 Mearns Road 5880 Bingle Road 27881 State Route 7
Warminster, PA 18974 Houston, TX 77092 Marietta, OH 45750
(W) www.TeikokuPumps.com (W) www.TeikokuPumps.com (W) www.TeikokuPumps.com
(P) (215)343-6000 (P) (713)983-9901 (P) (740)538-5332
(F) (267)486-1037 (F) (713)983-9919 (F) (740)538-5015

Quotation Summary
The following is a price summary for this quotation. Please see item specific pages for more details.

Item Number Service Pump Model Unit Price in US$ Quantity Extended
price in US$

001 NH3 R42-316F4AL-0506T1-E $ 10,256 1 $ 10,256

Grand Total $ 10,256

SCOPE OF SUPPLY: Only the material detailed in this quotation is being offered. No assumption should be made that
anything not specifically defined is included.

VALIDITY: This offer is valid for 30 days from date issued.

PRICE: The price quoted is for all items purchased at one time. Partial orders may be subject to a price adjustment.

Payment Terms: Cash in Advance

FREIGHT: FOB Pennsylvania.

LEADTIME: Approximately 3 - 4 weeks after receipt of order.

WARRANTY: 24 months from shipment.

STARTUP SUPPORT: Included.

TERMS AND CONDITIONS: Our standard terms and conditions are attached and apply.

Page 2 of 9
 Customer : Corporacion Avicola Del Customer Price Sheet
Caribe Ltd Teikoku USA Quotation System 20.3.5
Reference : Replacement Pump
Quote - S/N PJ0052A

Item number 001 Size / Stages 0506T1 / 1

Quote number TUS2001138 Pump speed 3446 rpm

Total
Grand Total $ 10,256 Lead Time Total 3 - 4 wks

Pump
Qty Description Average Unit Price Extended Price
1 R42-316F4AL-0506T1-E $ 10,256 $ 10,256
Teikoku Product
Motor Details
Inverter Duty: YES
Inducer: YES
Motor Winding Protection: None
Motor Construction: Rolled Band
Motor List: Motor 316 60Hz 460V 2 Pole 8.3 HP
Materials of Construction
Material: 304 SS
Casing Material: 304 SS
Impeller Material: 304 SS
Shaft Material: 304 SS
Bearing Housing Material: 304 SS
Bearing Material: Carbon Graphite 10T
Stator Liner: 316L SS
Rotor Liner: 316L SS
Shaft Sleeve/Thrust Collar: 316SS + Stellite
Gaskets: PTFE
Design Pressure
Design Pressure: 300 Psi
Connections
Suction Flange Rating: Suction Size: 2.5'', #300 RF
Discharge Flange Rating: Discharge Size: 2'', #300 RF
Circulation
Circulation Plans: Plan 13-SE
Electrical / Instrumentation
Bearing Monitor: Teikoku Rotary Guardian (TRG) electronic bearing wear
monitor without direction of rotation

Optional Adders
Qty Description Unit Price Extended Price
Spares
1 Service Kit, Pump Model R-310-T-E $ 1,921 $ 1,921

Page 3 of 9
 Hydraulic Test Report
Run Date: 1/19/2017 9:55 Customer: Refrigeration Valves & Systems
Serial Number: PJ0052A Sales Order: 31082 Cust. PO: 23574
Model: R42-316F4AM-0506T1-E-190 Customer Part Number: RVS-120-45-8.3
Ordering Condition Motor Rating Test Instrumentation
Fluid: Ammonia Voltage: 460 Suction: PS-4
S. G.: 0.65 Frequency (Hz): 60 Discharge: PD-4
Viscosity (cP): 0.25 Phases: 3 Temperature: PT-4
Temperature (°F): 10 Poles: 2 Flow Rate: PF-4
Design Pressure (psi): 300 PSI Rated Current (A): 12 Power Analyzer: PA-2
Flow Rate (GPM): 100 Rated Input (kW): 7.3 Loop: Loop P4
TDH (ft): 195 Insulation Class: 155 degC Circ Flow: PF-6
NPSHr (ft) 3.9 PLC: PPLC2 (PLC8)

250 25

200 20

Input Power (kW)-Current (A)

Current
150 15
TDH (ft)

TDH
Input Power
100 10

50 5

0 0
0 50 100 150 200 250
Water Test Data Points Flow Rate (GPM)
Flow Rate TDH Input Power Voltage Current Overall Eff
(GPM) (ft) (kW) (V) (A) (%)
0.0 227.0 5.8 471.0 8.4 0.0
25.1 225.6 6.6 472.0 9.5 16.2
50.6 221.6 7.4 472.0 10.5 28.7
75.9 214.6 8.3 472.0 11.7 36.9
100.2 204.6 9.1 471.0 12.8 42.6
130.6 192.2 9.9 471.0 13.8 47.8
160.7 167.4 10.8 471.0 15.1 47.1
190.5 130.4 11.4 472.0 16.0 41.2
Balance Holes (in) (6) Ø0.281 on 3.543 B.C.

Impeller Diameter (in): 7.480

End Play (in): 0.065
Discharge Orifice Size (in): None
Circ Flow Orifice Size (in): 0.141

Page 4 of 9
Page 5 of 9
 Reverse Circulation
System Piping Options
These instructions describe the recommended method for installation of the Reverse Circulation
Piping on Teikoku R-Type Pumps, which are specifically designed to handle highly volatile fluids.
These instructions also include recommendations for the suction pipe and the bypass pipe.
1. Reverse Circulation Piping vertical line. must be continuously rising back up to the
The purpose of these recommendations is to i. This line must be individual for each pump. suction tank.
vent any vapors that form inside the reverse Never combine these lines. b. If incorporated, the orifice plate shall be
circulation pipe. Trapped vapors in the reverse j. Never connect this line to the suction, dis- installed in vertical line.
circulation line will cause the flow through the charge or minimum flow lines. c. Never combine these lines.
line to stop. In the event that the flow stops, the k. The total head of this line (HR) must never d. A block valve shall be installed in the
pump will be damaged from liquid vaporization exceed the value specified on the data sheet of bypass line.
and/or overheating. Following these recommen- the pump.
dations will allow both the vapor and liquid to 2. Suction Pipe
flow freely back to the suction tank. a. Suction
pipe shall be
a. This line must be connected to the vapor constantly
zone in the suction tank. falling until it
b. Never install a check valve on this line. reaches the
c. This line must be continuously rising to the pump suction.
suction tank. b. If any
d. This line must never be down-slope at any reducer is
point, as this will create vapor traps. installed in the
e. The Teikoku supplied reverse circulation suction line, the
line orifice must be installed in this line. reducer must
Controlling the required reverse circulation be eccentric
flow rate using a flow meter and a control and must be
valve is an option. installed with
f. Install a block valve in this line. This block the flat side on
valve must be 100% open at all times. top.
g. To prevent vapor traps, use of a full port ball 3. Bypass Pipe for Typical Installation
type valve is recommended. Minimum Flow
h. The orifice plate must be installed in a. This line

Page 6 of 9
 Alternate Piping Options

System with NO existing pump vent line inside tank

System with existing pump vent line inside tank

Teikoku USA Inc OEM & Market Manager

5880 Bingle Road Brian Dudley
Houston, TX 77092 (281) 846-2854
www.TeikokuPumps.com Page 7 of 9 [email protected]
 Terms
&
Conditions
of
Sale



TEIKOKU
USA
 INC.,
 HEREAFTER
SHALL
BE
REFERRED
 TO
 AS
TEIKOKU.


1. TERMS Payable in United States currency. Net cash Delivery dates are estimated as closely as possible.
30 days, F.O.B. factory. Payable at the remit to address Teikoku will use its best efforts to make delivery within
designated on the invoice. Prices are subject to change the time specified, but in any event, Teikoku will not be
without notice. In the event of default of payment when liable for damages of any kind, liquidated or
due of any indebtedness created by acceptance of unliquidated, on account of failure to meet delivery
invoiced material, the Seller (Teikoku) shall be entitled dates. All errors, clerical or otherwise are subject to
to interest on any such indebtedness from the date due correction. All claims for shortages or inaccurate filling
at the highest legal rate plus reasonable attorney's fees of orders shall be made in writing within ten (10) days
should an attorney be employed to collect any such after Buyer's receipt of material.
indebtedness after default.
5. WARRANTY The following warranty, which is not
2. ORDERS All orders subject to acceptance by a consumer warranty, is made in lieu of any and all
authorized personnel at Teikoku. (Location accepting implied or express warranties including, without
order.) limitation, implied warranties of merchantability and
fitness for a particular purpose and no other warranty is
3. QUOTATIONS All quotations subject to approval made or authorized to be made.
by authorized personnel at Teikoku, Warminster, Pa,
Houston, TX or Belmont, WV. This proposal, and the Service under this warranty is the responsibility of the
prices and other specifications quoted herein, shall installing dealer or contractor. In the event service is
remain firm for a period of thirty days from date, unless required, the Buyer should request such service directly
otherwise specified in writing by Teikoku. from the installing dealer or contractor. If for any reason
the installing dealer or contractor is unknown or cannot
4. SHIPMENTS The shipment date quoted is subject be located, the Buyer should write Teikoku USA Inc for
to the following: (1) Prior sale of stock items. (2) Other the name and address of the nearest dealer or contractor.
procurement based on shipping schedule at time of
acceptance of an order. (3) All Government regulations If within two (2) years following date of delivery, any
and directives that may be imposed or which apply material supplied by Teikoku hereunder proves
during term of contract. defective or fails to meet the agreed specifications,
Buyer shall not return it unless requested to do so, but
The performance of contract is contingent upon shall immediately notify the installing dealer or
accidents, fires, strikes, and other causes beyond the contractor, stating full particulars in support of his claim
control of Teikoku. Material is subject to shipment in and if faulty workmanship or material is involved, or if
whole or in part at the option of Teikoku and each such material fails to meet the agreed specifications, Teikoku
shipment is subject to immediate invoicing. will adjust the matter fairly and promptly. Under no
circumstances shall Teikoku be obligated to allow
Delivery of material to the common carrier shall claims for subsequent or consequential damages or for
constitute delivery thereof to Buyer and, thereafter, any labor or expense incurred by reason of the use or
material shall be at Buyer's risk. Claims for damage to sale of any material which is defective or fails to meet
or loss of material in transit shall be filed by Buyer direct the agreed specifications. The sole measure of damages
with carrier. shall be the price received therefore by Teikoku.

Page 8 of 9
Defects shall not include decomposition or wear caused 10. ILLUSTRATIONS Catalog illustrations are actual
by chemical action. The component materials set forth representation of a certain size of each line of products
in a proposal and/or the specifications of an order, are but do not necessarily represent all sizes in all details.
recommended by Teikoku for the particular application, The designs shown are subject to change without notice.
but such recommendations shall not be construed as a
warranty against wear and/or corrosion; and, such 11. EFFECT OF TERMS AND CONDITIONS The
recommendations are subject in all cases to verifications terms and conditions herein contained shall apply to any
and acceptance by Purchaser. Warranty on equipment order or direction received from Buyer and no provision
and accessories furnished by outside manufacturers in any such order or direction from Buyer in any way
shall be limited to the warranty of the respective modifying or changing said terms and conditions shall
equipment and/or accessory manufacturer for such be binding upon Teikoku. No modification shall be
units. effected by Teikoku's shipment of goods following
receipt of Buyer's order or request for shipment which
No warranty shall apply to any product which is may contain revisions contrary to the terms and
modified or changed in design or function after leaving conditions herein contained.
the Teikoku factory.
12. WAIVER Waiver by Teikoku of any breach of
6. PATENT PROTECTION Teikoku will, at its own these provisions shall not be construed as a waiver of
expense, defend any suits that may be instituted against any other breach.
the buyer for alleged infringement of United States and
Japanese patents relating solely to specific devices of 13. MINIMUM CHARGE An order for items for
Teikoku's manufacture listed herein, provided such which invoice prices aggregate less than $50.00 net will
alleged infringement shall consist only in the use of such be billed at $50.00.
specific device itself and not as a part of any
combination of other devices and/or parts, and provided 14. ASSIGNMENT None of Buyer's rights under any
the Buyer gives Teikoku immediate notice in writing of order shall be assigned or otherwise transferred by the
any such suit and permits Teikoku, through its counsel, Buyer to any other person, whether by operation or law
to answer the charge of alleged infringement and to or otherwise, without the Seller's prior written approval.
defend such suit, and provided Buyer gives all needed
information, assistance, and authority to enable Teikoku 15. WEIGHTS Weights shown in catalogs, price
to do so and thereupon in case of a final award of schedules, quotations, or acknowledgments or orders are
damages in any suit, Teikoku will pay such award but approximate and are in no sense guaranteed. They
shall not be responsible for any compromise made represent the average weight of products as made from
without its written consent. patterns in use at time weights were compiled.

7. TAXES Purchaser agrees to bear all taxes of any 16. SPECIAL CONDITIONS Any additional cost
kind now or hereafter imposed on this contract or upon incurred in packaging or in making any special test or
the manufacture, sale, lease, shipment, ownership, inspection which is requested by Buyer and is in
possession or use of the items covered by the proposal. addition to those regularly supplied by Teikoku will be
charged to Buyer. Such tests and inspections will be
8. CANCELLATION All orders upon acceptance by made only at the factory before date of shipment. Unless
Teikoku, and Purchaser shall not be subject to stated otherwise on this quotation, Seller's(Teikoku)
cancellation and revisions or changes therein shall be acknowledgment and acceptance of orders at the price
made only upon the written acceptance thereof by quoted herein are on the basis of the customer's release
Teikoku which may be granted, withheld, or for production within three (3) months from the date of
conditioned upon payment of a cancellation charge at order and acceptance of shipment thereafter within
Teikoku's sole discretion. period quoted. Orders released by the customer after
three (3) months from date of order will be invoiced at
9. RETURN MATERIAL Buyer shall not return any price in effect at the time of shipment.
material delivered by Teikoku without prior
authorization from Teikoku.

Teikoku USA Inc Terms & Conditions of Sale page 2 of 2

Page 9 of 9