LESSON 7

GETTING TO KNOW MICROSOFT Excel

pt. 1

WHAT I NEED TO KNOW

Learning Objectives: At the end of this lesson, the learners are expected to:

1. Understand the features of Microsoft Excel

2. Apply the key knowledge in creating Excel file.
3. Perform an Activity.

General Instructions Now that you are holding this module do thefollowing:

Send your files on my official email address for this subject:

[email protected]
 LEARNING CONTENT
Vocabulary
Microsoft Excel is a spreadsheet program. We use it to create reports that need calculations and charts.
1. An Excel file is called a Workbook.
- Default title is Book1
2. Ribbon broken into Tabs (Home, Insert, Page Layout…)
- Tabs broken into groups (Clipboard, Font, Alignment)
3. Name box (left) and formula bar (right)
- Name box shows address of current cell
- Formula bar shows contents of current cell
4. Columns Headings are Lettered, Rows Headings are Numbered
- Columns of a building, rows of chairs
5. Worksheet navigation buttons, Worksheet tabs
- Sheet1
6. Status bar
- Excel behaves differently depending on the current "mode"

Status Bar Modes

‐ Ready mode. This means nothing is being entered or edited on the spreadsheet.
‐ Enter mode. This mode is when you are doing data entry, just typing in the contents.
‐ Edit mode. Edit the contents of the current cell. Double‐click on a cell with data in it, or click inside
1
 the formula bar for this mode.
Point mode. Used when linking to cell addresses within a formula or from an Excel dialog window.

2
Keyboard Navigation
Key Ready Enter Edit Point
Enter Move Down Accept changes and move down
Shift‐Enter Move Up Accept changes and move up
Tab Move Right Accept changes and move right
Shift‐Tab Move Left Accept changes and move Left

Arrow Keys Moves to another cell Moves between Points to an

characters in cell address of a cell

Home Moves to first column Moves to the front Points to cell in

of the line in the cell column A
Ctrl‐Home Moves to the beginning cell of the Points to the
worksheet (A1) beginning of the
worksheet

Ribbon
The images of Excel in this packet were copied from a wide screen monitor. With the wide screen the
ribbon is stretched across the window and I can see all the buttons. If you are working on a narrower
window, Excel will try to clump the groups together and the layout may look a little different than the
ones shown here, but all the buttons will be there.

Here we can see how the font group is now three buttons high, and how some of the buttons like Cut
and Copy have lost their text labels.

Clipboard
Cut, Copy and Paste are clipboard features built into Windows. The clipboard is a temporary storage
place for pictures and data. The Windows clipboard can only store one item at a time. Microsoft Office
has a Multi‐Clipboard that can store 24 items, but the Paste button and the shortcuts for the Paste
option only correspond to the most recently copied item. The clipboard pane must be displayed to be
able to use this feature.
Cut – Copies selection to the clipboard. If the selection is text or an image, it will
disappear. If it’s a cell, Excel waits until you paste it to delete the original cell.
Copy – Copies selection to the clipboard.
Paste – Retrieves most recent text/object on the clipboard.

3
Formatting Cells
The most formatting options are found on the Home Tab. All the options can be found in the Format
Cells window. This contains several tabs to help us format the contents of our spreadsheet. This window
can be opened by using the More Options button at the end of the Format, Alignment and Number
groups. You can also use the Keyboard Shortcut – Ctrl‐1 or choose Format Cells… from the right‐click
shortcut menu.

Font 2 3 4
1. Font – Sets the font of the selected cell(s). Fonts are
different ways to show the same letters.
2. Font Size – Sets the size of the letters (the font). Larger
numbers give larger fonts.
3. Increase Font – Increases the font size
5 6 7 9 10 11
4. Decrease Font – Decreases the font size
5. Bold – Makes the selected cell(s) Bold
6. Italic – Makes the selected cell(s) Italicized
7. Underline – Makes the selected cell(s) Underlined. The drop down has a double underline.
8. Borders – Adds and removes borders for the selected cell(s). The drop down has More Borders…
9. Fill Color – Changes the background color of the selected cell(s).
10. Font Color – Changes the color of the font of the selected cell(s).
11. More Options – This button will open the Format Cells dialog window.

Alignment 1 2 3 4 5
1. Top Align – Vertically aligns to the top of the cell.
2. Middle Align – Vertically aligns to middle of the cell.
3. Bottom Align – Vertically aligns to the bottom of
the cell.
4. Orientation – Rotates the contents of the cell to 6 7 8 9 10 11 12
the currently displayed option.
5. Wrap Text – Displays contents on multiple lines within the cell's column width.
6. Align Text Left – Horizontally aligns the contents to the left side of the column.
7. Center – Horizontally aligns the contents to the center of the cell.
8. Align Text Right – Horizontally aligns the contents to the right side of the cell.
9. Decrease Indent – Decreases the space between the text and the cell border
10. Increase Indent – Increases the space between the text and the cell border
11. Merge and Center – Joins selected (adjacent) cells into one cell and centers the result. If there is
data in more than one cell, Excel will only keep the information from the upper left cell.
12. More Options – This button will open the Format Cells dialog window to the Alignment Tab.

4
Number
1. Number Format – Allows you to change the way numeric values are
displayed on the spreadsheet. The drop down arrow gives you a list of
the most common formats, including a More Number Formats option.

2. Currency Style – Sets the selected cell(s) to the Currency Style, this
style keeps the dollar signs on the left side of the cell, and the 2 3 4 5 67
number on the right side. The drop down arrow gives you a list of
other currency formats, such as the Euro (€).

3. Percent Style – Sets the selected cell(s) to the Percent Style, this style has zero decimal places.
Keyboard shortcut ‐ Ctrl‐Shift‐%. This button can be reset through Cell Styles on the Home Tab.

4. Comma Style – Sets the selected cell(s) to the Comma Style, this style has a comma for every
thousand and two decimal places. This button can be reset through

5. Increase Decimal – Increases the number of decimal places showing to the right of the decimal.

6. Decrease Decimal – Decreases the number of decimal places showing to the right of the decimal.

7. More Options – This button will open the Format Cells dialog window to the Number Tab.

Cells Structures
There are a set number of cells within a Microsoft Excel worksheet. In the Ribbon versions (2007 and
later) there are 16,384 columns and 1,048,576 rows. As you insert and delete structures, you are not
reducing the number of cells, merely shifting where your data lies on the defined worksheet. Think
about moving a painting around on a wall. You're not changing the wall, just the position of the painting.
Inserting
We use Insert to make new cells, columns, and rows.
Excel determines what you are trying to insert based on your selection. If a full column is selected, Excel
will assume you mean a full column and it will skip the Insert window.
You can insert a cell, row, or column by doing one of the
following:
 Press Shift ‐ Ctrl ‐ = on the keyboard (ctrl plus)
 or from the Home tab, in the Cells group, choose Insert
 or open the Right‐click menu and choose insert.

‐ To insert multiple at once, select the number of

cells/rows/columns you would like to insert and follow the
steps above.

‐ The size and format of the new space is determined by the previous row or column.

‐ This will push the existing cells, columns, or rows to the right or down to make room for the new cells.

5
Deleting
We use Delete to remove cells, columns, and rows. Excel
determines what you are trying to delete based on your
selection. You can delete a cell, row, or column by doing one of
the following:
 Press Shift ‐ Ctrl ‐ ‐ on the keyboard (Ctrl Minus)
 or from the Home tab, in the Cells group, choose Delete
 or open the Right‐click menu and choose insert.

‐ To delete multiple at once, select the number of cells/rows/columns you would like to delete and
follow the steps above.

‐ This will completely remove the structure, formatting and all, and the rows/columns/cells will shift
into this place. If you only intended to delete the contents not the cells, undo and use the Clear
Contents option instead.

Cell Size (Row Height/Column Width)

You cannot resize one cell; the structure is dependent on the entire row and column where it resides.
The Row Height and Column Width settings can be found under the Format menu in the Cells group of
the Home tab.
Adjusting with the Mouse
When we resize we are growing away from the left.
To resize the column, place your mouse cursor between the lines of the
column headings. The current column heading is in a box; all you need to
do is resize the box to make it wider. Put your mouse along the right side
of the heading box until you see the resizing arrow pointing in two
directions. Click and drag away from the column letter. When you let go
of the mouse, the column will resize.

To resize the row, place your mouse cursor between the lines of the row
headings. The current row heading is in a box; all you need to do is resize
the box to make it wider. Put your mouse along the bottom side of the
heading box until you see the resizing arrow pointing in two directions.
Click and drag away from the row number. When you let go of the
mouse, the row will resize.
Auto‐fitting
You can use the option found on the Format menu, or place your mouse
cursor between the headings, with the two‐way arrow to help resize, and
double‐click. The row or column should AutoFit to the largest data length
within its structure.
‐ To resize multiple at once, select the cells you would like to fit and follow the steps above.
If you are using double‐click to auto‐fit, the entire column/row structures must be selected.

6
Fill Handle
The Fill Handle is in the bottom right corner of the selected cell. When
you place your mouse over this handle, it changes from a thick white
cross, to a thin black cross. Once you see the thin cross (no arrows) you
can click and drag the cell to fill its contents in a single direction (up,
down, left or right). If you want to go in two directions, you must first
complete one way, let go of the mouse and then drag the handle in the
second direction.
When you use the Fill Handle to pull down a single number or plain text, it will copy the data. When you
use the Fill Handle to pull down a text with numbers, a date, a month or a weekday it will fill in a series.

Text 123 Exam 1 2/1/02 February Friday

Text 123 Exam 2 2/2/02 March Saturday
Text 123 Exam 3 2/3/02 April Sunday

When you select two or more numbers (including dates) and then use the Fill Handle, Excel will fill in the
series, following the original pattern of the selected cells. It can only follow simple addition and
subtraction patterns.

123 100 2/01/17

124 110 2/08/17
125 120 2/15/17
126 130 2/22/17
Building an Equation
You can directly type in values, but that data stays constant. If you want to have the answers to your
equations update as you change your data, you should use the cell addresses. You will see the cell
addresses change colors so you can tell which ones are used in your equation.
Type in the exact cell address
Cells are labeled by their row and column headings. Rows are numbered and go horizontally across
(rows of chairs) and columns are lettered and go vertically top to bottom (columns of a building). When
we refer to the address of a cell, we use the column letter then the row number such as A1.
- Click in the cell where the answer will appear
- Press the Equal sign (=)
- Type in the cell address you want to use in your equation
- Accept the answer or press the next math operator (+, ‐, *, /, ^)

A B C
1 1 2 =a1+b1
2

7
Use the mouse to point to the cell address
The mouse and arrow keys are both "pointers". If you press the equal sign and then use the mouse to
click on another cell, Excel will put you into a "POINT" mode, and place the address of the cell you
clicked on in your equation.
- Click in the cell where the answer will appear
- Press the Equal sign (=)
- Use the mouse to click on the cell you want to use in your equation
- Accept the answer or press the next math operator (+, ‐, *, /, ^)

A B C
1 1 2 =A1
2

Mathematical Operations
To let Excel know you expect it to "do math" you need start your cell with an equal sign (=).
‐ Addition, plus sign (+) = 5+2 result 7
‐ Subtraction, hyphen (‐) = 5‐2 result 3
(also used for negative) = ‐5 result ‐5
‐ Multiplication, asterisk (*) = 5*2 result 10
‐ Division, slash (/) = 5/2 result 2.5
‐ Exponent/Power, caret (^) = 5^2 result 25

AutoSum
We can build equations to do math on a large number of cells, but there are functions built into Excel
that can help us automate the most common ones: Sum, Average, Count, Maximum, Minimum. On the
far right of the Home tab you'll find the sigma ( ∑ ).

When you click on the word AutoSum, you'll get a sum

function. There is a dropdown list at the end of the
button that will show more function options.
The AutoSum button looks for numbers above or to the
left of the cell to choose the range (the set) of numbers.
Make sure to press enter or click the check to accept as
soon as the function shows up. If you click outside the
cell while you see the function, you may break the
equation.

8
 LEARNING ACTIVITY
Direction: Follow the Instructions provided in each Exercises, Type your Answer in “EXCEL ANSWER SHEET” File

Exercise 1: Customers

Resizing Columns
1) Put your mouse on the line between any two Column
Letters. It will turn into a 2‐way arrow.
a. Hold down the mouse button and drag to resize
b. Double‐click between the headings to "AutoFit"

2) Select the entire worksheet by clicking on the triangle above the Row 1, left of the Column A
a. Try to resize any Column; all the selected columns will change
b. Double‐click between the headings to have it "Auto fit"

Freeze Panes (Lock Titles to Top of Page)

1) Press Ctrl‐Home on the keyboard to return to Cell A1

2) Turn to the View Tab in the Ribbon

3) Find the Option Freeze Panes

a. Choose Freeze Top Row
b. Scroll down through the worksheet to see the titles in Row 1 stay at the top

9
Format
1) Click on the Row Heading for Row 1 (click on the number 1) to select the entire row
 From the Home Tab, or right‐click menu, choose B for bold

2) Click on the Column Heading for Column G to select the entire Column
 From the Home Tab, choose $ for an accounting format
 Adjust the Column width again

3) Find a street name with a "fruit" address and use the Fill button (the bucket ) to shade it a
peach/orange color
 Change a few of them to match

4) Find a street name with a "vegetable" address and use the Fill bucket to shade a greenish color
 Change a few of them to match

10
Exercise 2: Quarter Total
Turn to the next worksheet at the bottom of the window, Quarter Total.
Fill Handle
1) If needed, Move to Cell A1
a. Hover your mouse over the bottom right corner
of the cell until it turns into a thin crosshair/plus
sign. This is called the Fill Handle.
b. Drag the Fill Handle down to the bottom of Row 5
c. Cells A1 through A5 now all say Quarter
d. UNDO!

2) Move to Cell A2
a. In Cell A2 type: 1st Qtr
b. Press Enter or the click the Check to accept
i. If needed, return to Cell A2
c. Drag the Fill Handle for Cell A2 to the bottom of Row 5
i. 1st Qtr, 2nd Qtr, 3rd Qtr, 4th Qtr
Format
1) Select titles in Cells A1 and B1
a. Bold
b. Bottom Border
c. Center

2) Select the numbers in Cells B2, B3, B4, and B5

a. Comma Format
b. Decrease Decimals to zero/none

Chart
1) Return to Cell A1 (Ctrl‐Home)

3) From the Insert tab, Recommended Charts

a. Opens the Insert Chart window

2) Click OK to accept the Column Chart option

11
Exercise 3: Items by Quarter
Turn to the next worksheet at the bottom of the window, Items by Quarter.
Insert Rows
1) Select Row 1 and Row 2
 Click on the row heading 1 and drag to
row heading 2

2) Right‐click Inside the selection

 Choose Insert

Merged Title
1) In Cell A1 type: Quarterly Sales Report

2) Select Cells A1 through E1

 Click the Merge and Center button

3) Format: Bold, Fill, Border

Fill Handle Across

1) In Cell B3, delete Qtr 1, and type: 1st Qtr

2) Drag the fill handle for Cell B3 across to Cell E3 The Fill Handle is the small square in the
bottom right corner of a selected cell.
3) Center and Bold the new titles

Total Row (AutoSum)

1) In Cell A8 type: TOTAL

2) In Cell B8 Click on the AutoSum button

 =SUM(B4:B7)
 Press Enter or click the check to accept (2079)

3) Drag the Fill handle in Cell B8 to Cell E8 to fill in the "sum" pattern for each quarter

12
Exercise 4: Sales Report
Turn to the next worksheet at the bottom of the window, Sales Report.
Format
1) Row 1 ‐> Bold

2) Column B ‐> Accounting ($)

3) Column C ‐> Centered Aligned

4) Cell C5 ‐> Right Aligned

Math
Total for each line item will be the Price times the Quantity.
1) Go to Cell D2

2) From the keyboard Type: =

3) With the mouse click on Cell B2 ($10.00)

 Cell D2 should now have =B2

4) From the keyboard type: *

5) With the mouse click on Cell C2 (5)

 Cell D2 should now have =B2*C2

6) Press Enter or click the check to accept

 Answer: $50.00
 If needed return to Cell D2

7) Drag the Fill Handle for Cell D2 to Cell D4

to fill in the pattern for the formula

Grand Total
1) Move to Cell D5
2) From the Home tab click on the AutoSum ∑
 =SUM(D2:D4)
4) Press Enter or click the check to accept
 Answer: $600.00

3) Change Cell B2 to $12.50 and press

enter or click the check to accept
 Grand Total should be $612.50

13
When sending your PowerPoint file in GMAIL, Name your Subject as LESSON 7.

Create your own email for this subject, follow this format:
Example: [email protected]

Send your activity to my email: [email protected]

Congratulations!
You successfully did it! Let’s proceed to Lesson 8

14
15