350–500 HP ROTARY SCREW COMPRESSORS
Electra Saver®
Decades of Dependability Leading in Energy Savings
The engineering ingenuity of Gardner Denver Over 40 years ago, Gardner Denver introduced
began in 1859. For over 150 years, our compressed the patented Turn Valve™ technology - the most
air products have been a dependable resource for efficient part load capacity control system in the
meeting the world’s most demanding and ever- industry. With infinite positions in an operating
changing industrial needs. Featuring direct drive range of 40% to 100% capacity, compressor
and premium efficiency motors, the Electra Saver® efficiency is maximized because the Turn Valve™
compressors provide the most durable and efficient airend compresses only the volume of air required
drive train money can buy. without affecting the built-in compression ratio at
partial load conditions. This technology eliminates
wide pressure fluctuations and massive storage
Bigger is Better requirements. Backed by proven reliability, the
Featuring super-sized bearings and up to 40% larger simple design eliminates complicated electronics
airends than the competition, the Electra Saver® and intricate valving. Shatter the competition with
is not only bigger, it is better. The larger airends, energy savings and reliability when you choose an
running at slower speeds, maximize efficiency Electra Saver® from Gardner Denver.
and reduce mechanical wear and tear, while the
permanent alignment of the airend and motor
ensure maximum coupling and bearing life.
ELECTRA SAVER 350–500 HP ROTARY SCREW COMPRESSOR
50 Hz 60 Hz
DRIVE
MODEL MOTOR NOMINAL NOMINAL NOISE
FAD FAD WEIGHT DIMENSIONS
PRESSURE PRESSURE LEVEL¹ L×W×H
HP KW PSIG BAR ACFM M³/MIN PSIG BAR ACFM M³/MIN DB(A) LBS KG IN. (MM)
100 6.9 1800 50.99 100 6.9 1684 47.71
SAV-350 350 260 125 8.6 1390 39.38 125 8.6 1434 40.62 14200 6441
150 10.3 1120 31.73 150 10.3 1166 33.03
84
100 6.9 2070 56.64 100 6.9 1943 55.04
153 × 84 × 78
SAV-400 400 298 125 8.6 1670 47.31 125 8.6 1652 46.80 14500 6577
(3886 × 2134 × 1981)
150 10.3 1310 37.11 150 10.3 1414 40.06
100 6.9 2580 73.09 100 6.9 2459 69.66
SAV-500 500 373 125 8.6 2050 58.07 125 8.6 2118 60.00 85 15000 6804
150 10.3 1700 48.16 150 10.3 1634 46.29
1) Noise level, weights and dimensions are for unenclosed models.
Electra Saver® Features (350–500 HP)
■■ Geardrive, oil flooded, single stage ■■ cULus listed and CSA approved ■■ ASME coded oil reservoir
rotary screw air compressor electronics ■■ Thermostatic oil control mixing
■■ AEON 9000SP ■■ Enclosure: Partial – standard valve
■■ Air and water-cooled ■■ Automatic,integral Turn Valve™ ■■ Stainless steel control lines
■■ AirSmart™
part-load control system
microprocessor ■■ Minimum pressure discharge
controller ■■ Packagemounted moisture check valve
■■ Oil
separator and trap
cooler/aftercooler: Air-cooled ■■ Optionalremote mounted
models – heavy duty radiator-type ■■ Mounted main motor starter not air-cooled cooler
with thermally controlled, totally available ■■ Optionalseacoast (air-cooled) or
enclosed fan motor with remote ■■ NEMA 4 electrical enclosure salt water (water-cooled) cooler
mount NEMA 1 starter; Water-
■■ ODP main motor; optional TEFC ■■ Voltage:
460 / 575 V
cooled models – heavy duty shell
and tube heat exchangers main motor (3 phase only)
Gardner Denver, Inc.
1800 Gardner Expressway
Quincy, IL 62305
866-440-6241
www.gardnerdenverproducts.com
©2016 Gardner Denver, Inc. Printed in U.S.A.
GSCS-SAV-350-500 1st Ed. 5/16
Supersedes GS-SAV-350-500 4th Ed. 11/12
Please recycle after use.
