Scribd
Upload
157 views

SATR

This document is a leak test report for refined product interface facilities at two Saudi Aramco plants. It summarizes the leak test performed on May 10th, 2022 including the test parameters, equipment used, and results. The test was conducted in accordance with ASME V requirements using air as the test medium. No leaks or loss of pressure were observed, and the test was accepted.

Uploaded by

Ahmed Boraey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
157 views

SATR

This document is a leak test report for refined product interface facilities at two Saudi Aramco plants. It summarizes the leak test performed on May 10th, 2022 including the test parameters, equipment used, and results. The test was conducted in accordance with ASME V requirements using air as the test medium. No leaks or loss of pressure were observed, and the test was accepted.

Uploaded by

Ahmed Boraey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff -March 2013) Rev 7 31-Mar-13

SATR NUMBER DATE APPROVED DISCIPLINE


SAUDI ARAMCO TEST REPORT
Leak Test Report SATR-A-2010 30-Apr-13 S-NHC-MEC-054
PROJECT TITLE WBS/BI/JO NUMBER CONTRACTOR/SUBCONTRACTOR

REFINED PRODUCT INTERFACE FACILITIES FOR NORTH


RIYADH AND 10-13269 NHC
QASSIM BULK PLANTS
EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION TEST PACK NO. TEST SYSTEM

LAYOUT DRAWING NUMBER REV. NO. S/U SYSTEM FACILITY P.O. NUMBER
AA-036886 , SHT-001 ,
TASK COMPLETED DATE RFI No. REQUESTED INSPECTION DATE QUANTITY MH's SPENT TRAVEL TIME
10-MAY-2022 , 11:00 AM 10-MAY-2022 , 11:00 AM
System Description:
Certificate No. Date:
Location in Service: Nature of Test: Direct Pressure Bubble Leak Test
Test Procedure in Accordance With: ASME V, Art 10, Mandatory App. I Test Medium: AIR

Pressure Gauges (PG) & Recorders (PR) Temp Gauge/Recorder Relief Valve
PG- PG- TG- TR- RV #

1 Serial No/Tag No. 422100312

2 Make MICHELIN
3 Range 0-150 PSIG
4 Certificate No UIC-SAF-20201676
5 Date Calibrated 13-APRIL-2022
6 Set Pressure
Re-Calibration
7 12-OCT-2022
Due Date
ITEM
No.
Test Parameters Requirements Actual Pass Fail Remarks
Test Medium (Indicate method of Use approved clean air
1
treatment if required) or approved inert gas
CLEAN AIR
Area of interest (Indicate flg joints, All flanges, threads,
2
weld joints, threaded, socket, body) welds, seal welds
WELD JOINTS
Direct Pressure Bubble
3 Method of Leak Detection
Leak Test (Procedure)*
VISUAL
4 Test Pressure: 5-10 psig 10 PSIG
Minimum 15 minutes
5 Duration
soak time before exam
15 MIN
Within temp rating of
6 System Test Temperature
App'd Bubble Solution
AMBIENT
7 Permissible leakage None NO LEAKAGE
Test Accepted. No leaks or loss in pressure observed. List number of leaks
TEST RESULTS: Rejected
and location below
AFFIX ANY TEST TAPE TO THIS REPORT (TEST EVIDENCE)

REFERENCE DOCUMENTS:
1. SAES-A-004, General Requirements of Pressure Testing, (30 January, 2011)
2. SAES-A-007, Hydrostatic Testing Fluids and Lay-Up Procedures, (24 July 2011)
Contractor / Third-Party Saudi Aramco
Technician Performing Test* PMT Representative
Name, Title, Department, Test Performed Successfully and Results are Acceptable: T&I Witnessed QC Record Reviewed Work Verified
Company, Initials and Name, Initials and Date:
Date:
QC Inspector PID Representative
Witnessed Test Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and Date: Name, Initials and Date:

QC Supervisor Proponent and Others


Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
Name, Organization,
Name, Sign and Date:
Initials and Date:
*Person Responsible for Implementation of Test and Analysis of Results Y = YES N = NO F = FAILED

Page 1 of 1

You might also like