Instructions for cleaning and sterilization
Weco Edger
E.32 / E.32 groove / E.12 / E.12 groove
This instruction guide aims to clean and sterilize your
E.32, E.32 groove, E.12, E.12 groove for common use .
For other instructions, please refer to the USER MANUAL of each model.
For your comfort it’s recommended to clean the device regularly. Please clean the instrument following these
instructions. Cleaning conducted by a process other than the one described in this instruction may cause
Edger E.32 / E.12
deterioration or damage to the equipment.
1- Clamping unit and clamping parts
Cleaning of the clamping unit and clamping parts should be done regularly twice a day, or when different persons are working
with the machine - before changing the user. Clean with Cidalkan wipes incl. alcohol. disinfectant or other alternative.
2- Edging chamber visor
Cleaning of the visor should be done regularly twice a day, or when different persons are working with the machine - before
changing the user. Clean with Cidalkan wipes incl. alcohol. disinfectant or other alternative.
3- Cleaning of the touchscreen 7- Cleaning the ON/OFF switch
Clean the screen and part infront of the touche screen The ON/OFF switch at the side should be cleaned with Cidalkan
after every use with Cidalkan wipes or other alternative. wipes everytime after switching off the machine.
Recommendation is to clean it after you take off your gloves.
The screen must be wiped gently without 8- Cleaning of the toolsbox
applying excessive force. Proceed to a regular cleaning of the exterior of the toolsbox and
particularly handles.
4- Cleaning of layout plate and lens holder 9- Cleaning of the external
body of the device
Please proceed to clean regularly the exterior of the device.
Clean the layout plate and lens holder after every use with
Most important the region around the edging chamber, the
Cidalkan wipes or other alternative.
region around the touchscreen, the region around the layout
plate and, in case of the E.32 (Groove) the region around the
5- Cleaning of lens blocker arm Tracing Unit.
Before cleaning the unit, turn it off and unplug it from the
Clean the lens blocker arm after every use with Cidalkan electric outlet.To clean the plastic surface of the device gently
wipes or other alternative. wipe the top, bottom, and front surfaces.
This document is not contractual - FC001171 - ind 00- April 2020
6- Cleaning of the tracer drawer and
cover
Clean the tracer drawer and cover after every use with Only use the below recommended
Cidalkan wipes or other alternative. solutions. Other solutions may damage or
discolour the device.
Every mechanical parts must be wiped
gently without applying excessive force.
Wipes - Instructions for use please read carefully !
01 02 03
Take a wipe out of its packaging and close Clean thoroughly by hand wiping. Throw away the wipe.
the packaging tightly after use. Leave the product on for 5 minutes. Change wipe for each medical
Do not rinse. surface or device.
REF. 369113 Cidalkan wipes incl. alcohol.
disinfectant
Standards CE 0459
LUNEAU TECHNOLOGY OPERATIONS
2 Rue Roger Bonnet-27340 PONT DE L’ARCHE - FRANCE - Tel. + 33 232 989 132 •
[email protected] • www. luneautech.com
CMJN (print) : 80 / 0 / 7 / 0
RVB : 0 / 178 / 227
Pantone : 306 C
HEX : #00b2e3
CMJN (print) : 67 / 9 / 100 / 0
RVB : 97 / 167 / 48
Pantone : 369 C
HEX : #61a730
